Skip to Content

1,193 Results Found

  • Article
  • Open Access
2 Citations
1,974 Views
25 Pages

Intelligent Analysis and Optimization of Lubrication Status Factor Based on Dynamically Loaded Roll Gap in Cold Strip Rolling

  • Shuren Jin,
  • Xu Li,
  • Pengfei Wang,
  • Feng Luan and ,
  • Fangsheng Chen,
  • Dianhua Zhang and
  • Haidong Zhang
  • + 2 authors+ 0 author

Lubrication is a critical process in cold strip rolling, and the accurate characterization of lubrication characteristics is an essential factor affecting the strip quality. The roll bending and tilting roll in the flatness actuators change the loade...

  • Article
  • Open Access
3,040 Views
27 Pages

The standard procedures for calculating the lifetime of rolling bearings, defined by DIN ISO 281 and ISO/TS 16281, have been revisited in this work with a specific focus on redefining the η factor for cylindrical roller thrust bearings (CRTBs). T...

(This article belongs to the Special Issue Recent Advances in Lubricated Tribological Contacts)
  • Article
  • Open Access
7 Citations
3,132 Views
19 Pages

2 November 2023

In response to issues such as the lack of capability for timely early warning and the difficulty in monitoring the status of rolling bearings, a condition-monitoring method for rolling bearings based on the Honey Badger Algorithm (HBA) for optimizing...

(This article belongs to the Section Fault Diagnosis & Sensors)
  • Article
  • Open Access
9 Citations
2,517 Views
10 Pages

Effect of Geometrical Factors on Torsion in Cold Roll Forming of the Lower Side Beam of a Car

  • Yesong Wang,
  • Xiaodong Xu,
  • Bobo Ren,
  • Jiang Liu and
  • Rongguo Zhao

26 August 2021

Cold roll forming is a continuous metal forming process used to produce a large variety of profiles. A significant product of cold roll forming is asymmetric profiles, whose application is expanding in the construction of cars, houses, bridges, etc....

(This article belongs to the Section Transportation and Future Mobility)
  • Article
  • Open Access
9 Citations
3,339 Views
26 Pages

13 March 2024

The power supply is crucial in the present day due to the negative impacts of poor power quality on the electric grid. In this research, we employed deep learning methods to investigate the power factor, which is a significant indicator of power qual...

(This article belongs to the Section E: Applied Mathematics)
  • Article
  • Open Access
6 Citations
3,657 Views
14 Pages

28 January 2021

Genetic studies have revealed that chromatin modifications affect flowering time, but the underlying mechanisms by which chromatin remodeling factors alter flowering remain largely unknown in rice (Oryza sativa). Here, we show that Rolled Fine Stripe...

(This article belongs to the Special Issue Regional Adaptation of Crop Plant in Response to Environmental Stress)
  • Article
  • Open Access
13 Citations
3,843 Views
19 Pages

23 April 2019

Vibration analysis is one of the main effective ways for rolling bearing fault diagnosis, and a challenge is how to accurately separate the inner and outer race fault features from noisy compound faults signals. Therefore, a novel compound fault sepa...

(This article belongs to the Special Issue Fault Diagnosis of Rotating Machine)
  • Article
  • Open Access
4 Citations
1,101 Views
28 Pages

4 December 2025

The penetration of distributed energy resources (DERs), such as photovoltaic (PV) generation and electric vehicles (EVs), in distribution systems has been increasing rapidly. At the same time, load demand is rising due to the proliferation of data ce...

(This article belongs to the Special Issue Advanced Control and Operation of Distributed Energy Resources in Modern Power Systems)
  • Article
  • Open Access
4 Citations
2,792 Views
21 Pages

12 November 2022

One of the most important factors influencing the study of the tribological behaviour of a rolling bearing is the calculation of the loads transmitted by individual rolling elements of the bearing. However, the calculation of the internal load distri...

(This article belongs to the Special Issue Tribological Characteristics of Bearing System)
  • Article
  • Open Access
12 Citations
7,182 Views
18 Pages

3 October 2020

This paper presents a new model for calculation of load for the most loaded rolling element in a rolling bearing with internal radial clearance. The calculation is based on a so-called load factor. By multiplying this factor by the value of the exter...

(This article belongs to the Special Issue Bearing Fault Detection and Diagnosis)
  • Article
  • Open Access
5 Citations
8,278 Views
16 Pages

27 November 2021

The objective of this study was to design the die groove profile and predict the rolling force produced when employing the variable curvature rolls and mandrel for manufacturing seamless pipes using the cold pilger rolling process. The parameters of...

(This article belongs to the Special Issue Advanced Marine Engineering and Technology: Sustainable and Smart Marine Engineering)
  • Article
  • Open Access
8 Citations
4,636 Views
17 Pages

Modeling and Analysis of Foot Function in Human Gait Using a Two-Degrees-of-Freedom Inverted Pendulum Model with an Arced Foot

  • Qian Xiang,
  • Shijie Guo,
  • Jiaxin Wang,
  • Kazunobu Hashimoto and ,
  • Yong Liu and
  • Lei Liu
  • + 1 author+ 0 author

Gait models are important for the design and control of lower limb exoskeletons. The inverted pendulum model has advantages in simplicity and computational efficiency, but it also has the limitations of oversimplification and lack of realism. This pa...

(This article belongs to the Special Issue Musculoskeletal Disorders and Diseases: Biomechanical Modeling in Sport, Health, Rehabilitation and Ergonomics)
  • Article
  • Open Access
8 Citations
2,139 Views
19 Pages

15 September 2024

The forming quality of profiled ring rolling not only encompasses macroscopic accuracy but also emphasizes the microstructure. Due to the multiple process parameters and complex metal flow during profiled ring rolling, the various forming defects are...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
13 Citations
8,032 Views
14 Pages

5 May 2014

This study uses the Joule heating effect-generated temperature difference to monitor in real-time and localize both compressive and tensile strains for the polymer substrates used in the roll-to-roll process. A serpentine gold (Au) line was patterned...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
3 Citations
2,579 Views
10 Pages

Characterization and Mapping of a Rolling Leaf Mutant Allele rlT73 on Chromosome 1BL of Wheat

  • Lin Huang,
  • Meijuan Gan,
  • Wenzhuo Zhao,
  • Yanling Hu and ,
  • Lilin Du,
  • Yuqin Li,
  • Kanghui Zeng,
  • Dandan Wu,
  • Ming Hao and
  • Dengcai Liu
  • + 10 authors+ 5 authors

Leaf rolling is regarded as an important morphological trait in wheat breeding. Moderate leaf rolling is helpful to keep leaves upright and improve the photosynthesis of plants, leading to increased yield. However, studies on the identification of ge...

(This article belongs to the Section Molecular Plant Sciences)
  • Article
  • Open Access
9 Citations
4,125 Views
22 Pages

Experimental Analysis of Rolling Torque and Thermal Inlet Shear Heating in Tapered Roller Bearings

  • Manjunath Manjunath,
  • Dieter Fauconnier,
  • Wouter Ost and
  • Patrick De Baets

3 August 2023

The investigation in this article focuses on the rolling resistance torque and thermal inlet shear factor in tapered roller bearings (TRBs) through systematic experiments using a modular test setup. TRBs typically operate under Elastohydrodynamic Lub...

(This article belongs to the Section Friction and Tribology)
  • Article
  • Open Access
9 Citations
3,705 Views
17 Pages

Effect of the Initial Texture, Recrystallization and Re-Dissolution Process on the Evolution of Texture during Solution Treatment of the 7A65 Hot Rolled Plate

  • Hao Wang,
  • Lina Jia,
  • Wenbo Wang,
  • Chengtong Ye and ,
  • Chen Li,
  • Xinquan Zhang and
  • Hu Zhang
  • + 2 authors+ 0 author

21 December 2021

The evolution of textures, the degree of recrystallization and the mechanical properties of 7A65 hot rolled plates during re-dissolution were studied with different thicknesses (25 mm, 65 mm, 120 mm) and different degrees of deformation. It was found...

(This article belongs to the Special Issue Development and Applications of New Lightweighting Metal Technologies: High Strength Al and Mg Alloys)
  • Article
  • Open Access
27 Citations
4,964 Views
17 Pages

7 January 2019

Controlling the microstructure homogeneity is crucial in achieving high quality tantalum (Ta) sputtering targets used in integrated circuit fabrication. Unluckily, traditional rolling easily generates a microstructure gradient along the thickness dir...

  • Article
  • Open Access
424 Views
27 Pages

Friction at the cold rolling interface is affected jointly by the surface roughness, lubrication state, local pressure, and relative sliding. A constant friction coefficient is therefore insufficient to describe its non-uniform distribution along the...

  • Article
  • Open Access
2 Citations
2,044 Views
33 Pages

The prediction of agricultural commodity futures returns is crucial for understanding global economic trends, alleviating inflationary pressures, and optimizing investment portfolios. However, current research that uses full-sample decomposition to p...

(This article belongs to the Section Agricultural Economics, Policies and Rural Management)
  • Article
  • Open Access
14 Citations
4,116 Views
24 Pages

25 May 2021

For early fault detection of a bearing, the localized defect generally brings a complex vibration signal, so it is difficult to detect the periodic transient characteristics from the signal spectrum using conventional bearing fault diagnosis methods....

(This article belongs to the Special Issue Fault Diagnosis in Transportation and Industry: Sensors, Methods, and Experimental Applications)
  • Feature Paper
  • Article
  • Open Access
13 Citations
3,028 Views
13 Pages

Improving Texture and Microstructure Homogeneity in High-Purity Ta Sheets by Warm Cross Rolling and Annealing

  • Doudou Long,
  • Shifeng Liu,
  • Jialin Zhu,
  • Yahui Liu and ,
  • Shiyuan Zhou,
  • Xiaoli Yuan and
  • Dmytro Orlov
  • + 2 authors+ 0 author

20 October 2021

The evolution of texture and microstructure uniformity in high-purity tantalum (Ta) sheets during 135° warm cross rolling (WCR) was analyzed in detail. X-ray diffraction suggested that relatively uniform ‘ideal’ deformation texture distribution acros...

  • Article
  • Open Access
12 Citations
4,748 Views
22 Pages

Sparse Envelope Spectra for Feature Extraction of Bearing Faults Based on NMF

  • Lin Liang,
  • Lei Shan,
  • Fei Liu,
  • Ben Niu and
  • Guanghua Xu

21 February 2019

Periodic impulses and the oscillation response signal are the vital feature indicators of rolling bearing faults. However, finding the suitable feature frequency band is usually difficult due to the interferences of other components and multiple reso...

(This article belongs to the Special Issue Fault Detection and Diagnosis in Mechatronics Systems)
  • Article
  • Open Access
1 Citations
1,020 Views
35 Pages

6 July 2025

This research developed a complex physical and mathematical model of the flat rolling theory problem. This model takes into account the influence of many parameters affecting the roll’s gripping capacity and the overall stability of the entire...

(This article belongs to the Special Issue Symmetry Problems in Metal Forming)
  • Review
  • Open Access
9 Citations
4,359 Views
23 Pages

Theoretical Model Development and Mixed Lubrication Analyses of Rolling Piston Type Rotary Compressors: A Review

  • Chengwei Wen,
  • Pengpeng Bai,
  • Hang Zhang,
  • Shuaijun Zhang and ,
  • Xianghui Meng,
  • Yonggang Meng and
  • Yu Tian
  • + 2 authors+ 0 author

Owing to the requirements for high performance and long life, the friction and wear problems of rolling piston type rotary compressors have drawn much attention. Various theoretical models have been developed and improved to reveal the inner state of...

  • Article
  • Open Access
3 Citations
3,451 Views
17 Pages

Factors Influencing Web Wrinkling in Roll-to-Roll Coating Production Systems

  • Li’e Ma,
  • Kanghui Yu,
  • Zhenlong Zhao,
  • Yi Guo and ,
  • Yijun Ma,
  • Zehang Li and
  • Jimei Wu
  • + 2 authors+ 0 author

29 January 2025

The web-wrinkle phenomenon always occurs in the roll-to-roll coating production process, which leads to the decline of coating quality and an increase in waste. A theoretical analysis of the phenomenon is presented, and a simulation research method i...

  • Article
  • Open Access
13 Citations
3,953 Views
27 Pages

15 August 2018

This paper looks at the ability to cope with the uncertainty of wind power and reduce the impact of wind power forecast error (WPFE) on the operation and dispatch of power system. Therefore, several factors which are related to WPFE will be studied....

  • Article
  • Open Access
1 Citations
983 Views
25 Pages

22 November 2025

Power quality is a continuous concern in industry, especially in steel mills operating with nonlinear, fluctuating, and unbalanced loads. This paper investigates the influence of a Static Var Compensator (SVC) on power quality parameters in a hot met...

(This article belongs to the Special Issue Power Quality Monitoring with Energy Saving Goals)
  • Article
  • Open Access
12 Citations
5,231 Views
15 Pages

29 April 2019

Due to the instable conditions caused by the wear of rollers, macro voids inevitably occur in skew rolling steel balls. Macro voids in rolled balls greatly weakens the mechanical properties, resulting in the scrapping of about 23% of all skew rolling...

(This article belongs to the Special Issue Advanced Metal Forming Processes)
  • Article
  • Open Access
8 Citations
2,038 Views
22 Pages

6 December 2023

Due to the symmetry of their structure and the way they rotate, rolling bearings are often used at high temperatures and high speeds. When the temperature changes, the material properties of the rolling bearing change, which in turn causes the dynami...

  • Article
  • Open Access
256 Views
21 Pages

29 September 2026

Rolling force critically affects Fine Quality Mill (FQM) continuous rolling precision. The first stand, undergoing the largest reduction, determines subsequent entry conditions, requiring high prediction accuracy. Different from routine engineering-o...

(This article belongs to the Special Issue Advanced Metallic Materials and Forming Technologies)
  • Article
  • Open Access
11 Citations
4,451 Views
13 Pages

27 July 2019

Skidding damage mechanism of rolling bearings is not clear, due to the influence of various coupling factors. To solve this problem, it is important to identify and diagnose skidding damage and study the vibration characteristics in rolling bearings....

(This article belongs to the Special Issue Machine Fault Diagnostics and Prognostics)
  • Proceeding Paper
  • Open Access
357 Views
11 Pages

A Study on Factors Affecting the Joint Strength of Resistance Spot-Welded Joints in Aluminum Casting Alloys and Rolled Aluminum Alloy

  • Nanaha Taniwake,
  • Seiya Sugimoto,
  • Takeshi Matsukage,
  • Keisuke Kinoshita and ,
  • Yufu Watanabe,
  • Taishi Tarui and
  • Muneyoshi Iyota
  • + 2 authors+ 0 author

14 August 2026

With the increasing adoption of gigacasting in the automotive industry, establishing joining technologies between aluminum casting alloys and rolled aluminum alloys has become an important challenge. In resistance spot welding (RSW) of these dissimil...

(This article belongs to the Proceedings of The 16th International Aluminium Conference)
  • Article
  • Open Access
1,980 Views
10 Pages

Printed Primary Battery in a Rolled-Up Form Factor

  • Andreas Willert,
  • Sven Voigt,
  • Tobias Zschau and
  • Ralf Zichner

21 June 2024

In battery systems, there are several established form factors targeting mass market applications, like D, C, AA, AAA series, lithium round cells, and coin cells. Besides these standardized batteries, in printed electronics, there are several approac...

(This article belongs to the Section Smart Manufacturing System Design)
  • Article
  • Open Access
5 Citations
3,834 Views
22 Pages

Investigating Factors Influencing Rolling Shear Performance of Australian CLT Feedstock

  • Chandan Kumar,
  • Adam Faircloth,
  • Jon Shanks,
  • Robert L. McGavin and ,
  • Xin Li,
  • Mahmud Ashraf and
  • Mahbube Subhani
  • + 2 authors+ 0 author

30 March 2023

This paper presents an investigation on the influence of various factors on rolling shear (RS) properties of timber feedstock for cross laminated timber (CLT) available from Australian plantation forest resources. Comparison of RS properties between...

(This article belongs to the Special Issue Wood Conversion, Engineered Wood Products and Performance Testing)
  • Article
  • Open Access
302 Views
25 Pages

22 September 2026

To address the challenge where early fault signals of rolling bearings are easily submerged by strong noise, and fault features are difficult to extract under harsh working conditions, this paper proposes an adaptive fault diagnosis method termed HCF...

  • Article
  • Open Access
2 Citations
3,074 Views
20 Pages

Indirect Fuel Rationing for a Special Self-Propelled Rolling Stock

  • Alexander Mitrofanov,
  • Anton Ivaschenko,
  • Alexandr Avsievich,
  • Vladimir Avsievich and
  • Oleg Golovnin

24 January 2022

A method of indirect rationing of diesel fuel for special self-propelled rolling stock is presented, based on the identification of actual fuel consumption and controlled operating modes. Based on the results of test trips using automated accounting...

(This article belongs to the Special Issue Energy Intensity of Transport and Environmentally Friendly Mobility)
  • Entry
  • Open Access
16 Citations
36,010 Views
19 Pages

3 September 2021

The capital asset pricing model (CAPM) is an influential paradigm in financial risk management. It formalizes mean-variance optimization of a risky portfolio given the presence of a risk-free investment such as short-term government bonds. The CAPM d...

(This article belongs to the Collection Encyclopedia of Social Sciences)
  • Article
  • Open Access
287 Views
18 Pages

Experimental Study on the Fatigue Life of Low-Carbon Steel DD11: Combination of Pre-Strain and Notch Effect

  • Ivan Tomasi,
  • Luigi Solazzi,
  • Candida Petrogalli,
  • Alberto Mazzoni and ,
  • Rodolfo Faglia and
  • Giorgio Donzella
  • + 1 author+ 0 author

28 September 2026

This paper is intended to study the fatigue behaviour of low-carbon steel DD11 with the combined effect of pre-strain and notch geometry, which are important in components working under cyclic loading in service. To this end, experimental fatigue tes...

(This article belongs to the Special Issue High-Performance Alloys and Steels: Design, Processing, and Applications)
  • Article
  • Open Access
4 Citations
1,682 Views
22 Pages

18 January 2025

The edge effect is caused by poor use of confinement systems, different roll aspect ratios, operating conditions and other factors, which result in uneven pressure distribution between the two crushing rolls along the roll width direction, affecting...

(This article belongs to the Section Mineral Processing and Extractive Metallurgy)
  • Article
  • Open Access
5 Citations
2,932 Views
25 Pages

Study on the Influence of Rock Shape on Rolling Distance

  • Feng Liu,
  • Ning Hu,
  • Gangchen Sun and
  • Bai Yang

16 October 2023

To explore the influence of rock shape on rolling distance and effectively mitigate rockfall hazards, the following research was conducted. Factors influencing the rolling distance of rocks were determined through model experiments, and the mechanics...

(This article belongs to the Special Issue Advances and Challenges in Rock Mechanics and Rock Engineering)
  • Article
  • Open Access
2 Citations
4,095 Views
14 Pages

27 January 2024

The rolling process of aluminum foil is subject to the issue of variable thickness, which has a substantial impact on its performance. The thickness of the aluminum foil is influenced by various factors, including the magnitude of the bending force,...

  • Communication
  • Open Access
1 Citations
2,262 Views
14 Pages

28 June 2024

The microstructure evolution during the cold rolling and subsequent annealing of Alloy 800H was investigated. Two distinct rolling methods, unidirectional rolling and cross-rolling, were introduced. Cracks were observed in the cross-rolled plates, wh...

(This article belongs to the Section Computation and Simulation on Metals)
  • Article
  • Open Access
1,196 Views
13 Pages

27 March 2025

The final rolling temperature has a significant impact on the grain recrystallization and mechanical properties of rolled materials and is a key factor in the rolling process. With the development of the aerospace industry, higher requirements have b...

  • Article
  • Open Access
5 Citations
4,065 Views
15 Pages

A New Calculation Method of Cutterhead Torque Considering Shield Rolling Angle

  • Xiang Shen,
  • Dajun Yuan,
  • Dalong Jin and
  • Chengyong Cao

31 December 2021

The existing cutterhead torque calculation method usually simplifies the characteristics of the shield, which ignores the rolling angle. In this paper, the cross-river shield project of Wuhan Metro Line 8 is taken as the research focus. Firstly, the...

(This article belongs to the Special Issue Tunneling and Underground Engineering: From Theories to Practices)
  • Review
  • Open Access
3 Citations
2,364 Views
53 Pages

A Review of Experimental and Simulation Methods for Rolling Contact Fatigue

  • Minghui Wang,
  • Hao Su,
  • Zhigang Yan,
  • Chen Chen and ,
  • Chunlei Zheng,
  • Bo Lv and
  • Fucheng Zhang
  • + 2 authors+ 0 author

31 January 2026

Rolling contact fatigue and wear of wheel–rail systems are critical factors affecting the safety of high-speed railways and have long been key research topics in materials science. This paper reviews the theoretical foundations of wheel–r...

  • Article
  • Open Access
21 Citations
3,579 Views
12 Pages

Recrystallization and Anisotropy of AZ31 Magnesium Alloy by Asynchronous Rolling

  • Wenyong Niu,
  • Dongxiao Wang,
  • Guiqiao Wang and
  • Jianping Li

21 September 2023

In this study, the microstructure and mechanical properties of AZ31 magnesium alloy were investigated through asynchronous rolling. The results demonstrate that the rolled sample exhibits a refined grain structure with a significant presence of conti...

  • Article
  • Open Access
14 Citations
4,372 Views
13 Pages

Research on Shape Control Characteristics of Non-oriented Silicon Steel for UCMW Cold Rolling Mill

  • Hao Tao,
  • Hongbo Li,
  • Jian Shao,
  • Jie Zhang and ,
  • Yujin Liu and
  • Xuechang You
  • + 1 author+ 0 author

7 August 2020

In order to analyze the flatness control characteristics for a certain UCMW (Universal Crown Mill with Work roll shifting) cold rolling mill, combined with the actual parameters in the field, a static simulation model of the quarter roll systems of t...

(This article belongs to the Special Issue Advances in Friction, Lubrication, Wear and Oxidation in Metals Manufacturing)
  • Article
  • Open Access
3 Citations
2,657 Views
15 Pages

17 January 2025

The final result of rolling bearing quality control is influenced by many factors that are not always taken into account. If non-conforming products leave the factory, then the reliability of equipment containing rolling bearings is significantly wea...

(This article belongs to the Special Issue Research on Friction and Lubrication: Surfaces, Bearings and Gears)
  • Feature Paper
  • Article
  • Open Access
6 Citations
2,870 Views
11 Pages

Effect of Nanosized Precipitates on Corrosion Resistance of Nb-Microalloyed Steels

  • Irina Rodionova,
  • Nataliya Arutyunyan,
  • Andrey Amezhnov,
  • Dmitrii D’yakonov and ,
  • Yuliya Gladchenkova,
  • Sergey Dunaev and
  • Irina Vasechkina
  • + 2 authors+ 0 author

7 April 2022

High-strength cold-rolled low-carbon microalloyed steels are widely used in the automotive industry. Preference is generally given to microalloying with niobium, since its effect on the mechanical properties of steel is most pronounced due to both pr...

(This article belongs to the Special Issue Corrosion Science and Engineering: Recent Research, Insights, and Challenges)

of 24