Skip to Content
You are currently on the new version of our website. Access the old version .

598 Results Found

  • Article
  • Open Access
7 Citations
1,696 Views
10 Pages

A Comparison Between the Expansion Force Exerted by Thermo-Printed Aligners and 3D Printed Aligners: An In Vitro Study

  • Samuele Avolese,
  • Simone Parrini,
  • Andrea Tancredi Lugas,
  • Cristina Bignardi and ,
  • Mara Terzini,
  • Valentina Cantù,
  • Tommaso Castroflorio,
  • Emanuele Grifalconi,
  • Nicola Scotti and
  • Fabrizio Sanna
  • + 5 authors+ 0 author

Background: The fabrication of orthodontic aligners directly via three-dimensional (3D) printing presents potential to increase the efficiency of aligner production relative to traditional workflows; however, several aspects of the 3D printing proces...

(This article belongs to the Special Issue Advances in Additive Manufacturing Technologies in the Clinical, Pharmaceutical and Biomedical Sectors)
  • Systematic Review
  • Open Access
556 Views
15 Pages

Forces and Moments Generated by Thermoforming Aligners and Direct-Printed Aligners: A Systematic Review

  • Pritam Mohanty,
  • Saundarya Priyadarshini,
  • Debapreeti Mohanty,
  • Margherita Tumedei and ,
  • Massimo Del Fabbro,
  • Parameswaran Tirunelveli Mani,
  • Partha Pratim Chaudhary,
  • Balaji Krishnan,
  • Monalisa Das and
  • Saurav Panda
  • + 8 authors+ 3 authors

8 September 2026

Objectives: This systematic review aims to compare the forces and moments generated by thermoforming aligners and direct-printed aligners in guiding tooth movement in orthodontic patients, evaluating their impact on orthodontic outcomes. Methods: A s...

(This article belongs to the Special Issue Orthodontics and New Technologies: 2nd Edition)
  • Systematic Review
  • Open Access
9 Citations
3,245 Views
12 Pages

Cytotoxicity of Printed Aligners: A Systematic Review

  • Mauro Lorusso,
  • Fariba Esperouz,
  • Gabriele Di Carlo,
  • Michele Tepedino and ,
  • Rosa Esposito,
  • Giovanni Pappalettera,
  • Caterina Casavola,
  • Lucio Lo Russo and
  • Domenico Ciavarella
  • + 4 authors+ 0 author

20 June 2025

Background/Objectives: The capability of printing aligners directly, eliminating the need for a dental model or thermoforming, represents a significant advancement in aligner therapy. This review aimed to assess the cytotoxicity of 3D-printed aligner...

(This article belongs to the Section Dental Materials)
  • Article
  • Open Access
7 Citations
3,793 Views
15 Pages

28 January 2025

Background: Retention is a critical aspect of orthodontic treatment with aligners as it counteracts vertical displacing forces and ensures greater predictability of tooth movement. The aim of this study is to evaluate and compare the retention effect...

(This article belongs to the Special Issue Scanning Electron Microscopy and Energy-Dispersive Spectroscopy Analyses in Materials Science)
  • Review
  • Open Access
22 Citations
11,792 Views
21 Pages

3D Printed Orthodontic Aligners—A Scoping Review

  • Rebecca Jungbauer,
  • Hisham Sabbagh,
  • Mila Janjic Rankovic and
  • Kathrin Becker

5 November 2024

This scoping review aims to provide a comprehensive summary of the current literature on 3D-printed orthodontic aligners. It was conducted following the Preferred Items for Systematic Reviews and Meta-Analyses extension for Scoping Reviews (PRISMA-Sc...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
8 Citations
4,155 Views
19 Pages

Force Expressed by 3D-Printed Aligners with Different Thickness and Design Compared to Thermoformed Aligners: An in Vitro Study

  • Francesca Cremonini,
  • Carolina Pancari,
  • Luca Brucculeri,
  • Ariyan Karami Shabankare and
  • Luca Lombardo

7 March 2025

(1) Background: Clear aligners are favored for their aesthetics in orthodontics, with newer 3D-printed technologies allowing the design of aligners with differential thicknesses and materials, offering advantages in terms of force distribution on the...

(This article belongs to the Special Issue Orthodontics: Advanced Techniques, Methods and Materials)
  • Article
  • Open Access
50 Citations
7,826 Views
18 Pages

Color and Chemical Stability of 3D-Printed and Thermoformed Polyurethane-Based Aligners

  • Luka Šimunović,
  • Sara Čekalović Agović,
  • Antun Jakob Marić,
  • Ivana Bačić and ,
  • Eva Klarić,
  • Flavio Uribe and
  • Senka Meštrović
  • + 2 authors+ 0 author

11 April 2024

The significant rise in the use of clear aligners for orthodontic treatment is attributed to their aesthetic appeal, enhancing patient appearance and self-confidence. The aim of this study is to evaluate the aligners’ response to common stainin...

(This article belongs to the Special Issue Overviews on the Progress of Polymeric Materials for Dental Applications II)
  • Review
  • Open Access
276 Views
25 Pages

Direct three-dimensional (3D) printing of clear aligners has introduced distinct material, manufacturing, mechanical, and biological considerations. This narrative review aims to critically synthesize evidence on the materials science, additive-manuf...

(This article belongs to the Special Issue Advanced 3D-Printed Biomaterials in Dentistry)
  • Article
  • Open Access
10 Citations
2,016 Views
16 Pages

Influence of Water Storage on the Mechanical Properties of 3D-Printed Aligners: An In Vitro Study

  • Kathrin Puchert,
  • Paul Ritzert,
  • Sebastian Wille,
  • Jusef Naim and
  • Sinan Şen

Directly printed aligners represent a promising alternative to conventional thermoformed aligners. The aim of this in vitro study was to compare the effects of water on the mechanical properties of directly printed aligners with those of conventional...

(This article belongs to the Special Issue Advanced 3D-Printed Biomaterials in Dentistry)
  • Article
  • Open Access
189 Views
13 Pages

In Vitro Biocompatibility of 3D-Printed vs. Thermoformed Orthodontic Aligners on Human Gingival Fibroblasts

  • Teresa Stefania Dell’Endice,
  • Alessandra Campobasso,
  • Giovanni Battista,
  • Francesca Posa and ,
  • Giuseppina Storlino,
  • Federica Piccolo,
  • Eleonora Lo Muzio,
  • Lorenzo Sanesi and
  • Giorgio Mori
  • + 4 authors+ 0 author

Background/Objectives: Three-dimensional (3D)-printed clear aligners represent a new alternative for treating orthodontic malocclusions. However, their biocompatibility remains a critical factor requiring careful evaluation. Methods: In the current s...

(This article belongs to the Section Molecular and Translational Medicine)
  • Article
  • Open Access
1 Citations
1,823 Views
13 Pages

Color Variation in 3D-Printed Orthodontic Aligners as a Compliance Indicator: A Prospective Pilot Study

  • Francesca Cremonini,
  • Giuseppe Chiusolo,
  • Filippo Pepe and
  • Luca Lombardo

6 June 2025

Patient compliance remains a significant challenge in orthodontic treatment with clear aligners, as adherence to prescribed wear time is often suboptimal. This study investigated the potential of colorimetric analysis as a method to assess compliance...

(This article belongs to the Special Issue Orthodontics: Advanced Techniques, Methods and Materials)
  • Article
  • Open Access
2 Citations
858 Views
16 Pages

13 June 2026

To evaluate the effects of three different 3D printers, two clear aligner resins, two specimen thicknesses, two lengths, and two geometric designs on the tensile strength and elastic modulus of directly printed clear aligners. Specimens were produced...

(This article belongs to the Section Polymer Applications)
  • Systematic Review
  • Open Access
2 Citations
2,227 Views
17 Pages

Microbial Adhesion on 3D-Printed Composite Polymers Used for Orthodontic Clear Aligners: A Systematic Review and Meta-Analysis of In Vitro Evidence

  • Sandy Hazko,
  • Ahmed A. Holiel,
  • Rim Bourgi,
  • Carlos Enrique Cuevas-Suárez and ,
  • Roland Kmeid,
  • Louis Hardan,
  • Aly Osman,
  • Abigailt Flores-Ledesma,
  • Naji Kharouf and
  • Nicolas Nassar
  • + 5 authors+ 0 author

Objectives: This systematic review and meta-analysis aimed to evaluate microbial adhesion and biofilm formation on additively manufactured composite-based orthodontic clear aligners compared with thermoformed aligners and other conventional polymeric...

(This article belongs to the Special Issue Additive Manufacturing of Advanced Composites, 2nd Edition)
  • Article
  • Open Access
31 Citations
5,856 Views
17 Pages

26 September 2023

Aligner treatment is associated with bacterial colonization, leading to enamel demineralization. Chitosan nanoparticles have been demonstrated to have antibacterial properties. This in vitro study aims to determine the effect of adding chitosan nanop...

(This article belongs to the Section Nanocomposite Materials)
  • Article
  • Open Access
12 Citations
3,355 Views
13 Pages

Impact of UV Light Exposure During Printing on Thermomechanical Properties of 3D-Printed Polyurethane-Based Orthodontic Aligners

  • Luka Šimunović,
  • Antun Jakob Marić,
  • Ivana Bačić,
  • Tatjana Haramina and
  • Senka Meštrović

21 October 2024

Aim: Polyurethane-based aligners, created through photoinitiated free-radical polymerization, have been the subject of numerous studies focusing solely on their mechanical properties. In contrast, we investigate their thermomechanical properties, whi...

(This article belongs to the Special Issue Advancements and Updates in Digital Dentistry)
  • Review
  • Open Access
6 Citations
3,258 Views
24 Pages

The orthodontic landscape is currently witnessing a significant technological evolution with the emergence of direct 3D-printed aligners (DPAs), which promise to close the digital workflow loop by eliminating the geometric limitations and solid model...

(This article belongs to the Special Issue Dental Biomaterials in Implantology and Orthodontics)
  • Review
  • Open Access
271 Citations
23,568 Views
11 Pages

Direct 3D Printing of Clear Orthodontic Aligners: Current State and Future Possibilities

  • Gianluca M. Tartaglia,
  • Andrea Mapelli,
  • Cinzia Maspero,
  • Tommaso Santaniello and ,
  • Marco Serafin,
  • Marco Farronato and
  • Alberto Caprioglio
  • + 2 authors+ 0 author

5 April 2021

The recent introduction of three-dimensional (3D) printing is revolutionizing dentistry and is even being applied to orthodontic treatment of malocclusion. Clear, personalized, removable aligners are a suitable alternative to conventional orthodontic...

(This article belongs to the Special Issue Current and Future Trends in Orthodontic Materials)
  • Review
  • Open Access
79 Citations
20,029 Views
31 Pages

Advancements in Clear Aligner Fabrication: A Comprehensive Review of Direct-3D Printing Technologies

  • Poom Narongdej,
  • Mana Hassanpour,
  • Nicolas Alterman,
  • Frederick Rawlins-Buchanan and
  • Ehsan Barjasteh

29 January 2024

Clear aligners have revolutionized orthodontic treatment by offering an esthetically driven treatment modality to patients of all ages. Over the past two decades, aligners have been used to treat malocclusions in millions of patients worldwide. The i...

  • Article
  • Open Access
6 Citations
2,834 Views
16 Pages

Steering Potential for Printing Highly Aligned Discontinuous Fibre Composite Filament

  • Narongkorn Krajangsawasdi,
  • Duc H. Nguyen,
  • Ian Hamerton,
  • Benjamin K. S. Woods and ,
  • Dmitry S. Ivanov and
  • Marco L. Longana
  • + 1 author+ 0 author

21 April 2023

DcAFF (discontinuous aligned fibre filament) is a novel material for fused filament fabrication (FFF) 3D printing made of highly aligned discontinuous fibres produced using high performance discontinuous fibre (HiPerDiF) technology. It reinforces a t...

(This article belongs to the Section Polymeric Materials)
  • Article
  • Open Access
17 Citations
2,898 Views
9 Pages

Towards Green Dentistry: Evaluating the Potential of 4D Printing for Sustainable Orthodontic Aligners with a Reduced Carbon Footprint

  • Elena Palmieri,
  • Luca Montaina,
  • Denise Bellisario,
  • Ivano Lucarini and ,
  • Francesco Maita,
  • Martina Ielmini,
  • Maria Elena Cataldi,
  • Loredana Cerroni,
  • Roberta Condò and
  • Luca Maiolo
  • + 5 authors+ 0 author

20 December 2024

Clear aligners have transformed orthodontic care by providing an aesthetic, removable alternative to traditional braces. However, their significant environmental footprint, contributing to approximately 15,000 tons of plastic waste annually, poses a...

(This article belongs to the Section Smart and Functional Polymers)
  • Article
  • Open Access
19 Citations
6,079 Views
14 Pages

30 April 2023

Printing defects are extremely common in the manufacturing industry. Although some studies have been conducted to detect printing defects, the stability and practicality of the printing defect detection has received relatively little attention. Curre...

(This article belongs to the Section Sensing and Imaging)
  • Review
  • Open Access
13 Citations
3,267 Views
13 Pages

Biocompatibility and Safety of 3D Printing Resins for Orthodontic Aligners: A Critical Review of Current Evidence

  • Cecilia Goracci,
  • Utkarsh Mangal,
  • Stevan M. Čokić,
  • Annalisa Mazzoni and ,
  • Alessandro Vichi and
  • Uros Josic
  • + 1 author+ 0 author

19 November 2025

Orthodontic aligners 3D-printed in resin currently provide a viable alternative to thermoformed ones. However, concerns have been raised regarding their biocompatibility. This review addressed the available scientific evidence on the biological prope...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
16 Citations
3,916 Views
20 Pages

Open Hole Tension of 3D Printed Aligned Discontinuous Composites

  • Narongkorn Krajangsawasdi,
  • Ian Hamerton,
  • Benjamin K. S. Woods,
  • Dmitry S. Ivanov and
  • Marco L. Longana

6 December 2022

This paper explores the use of Discontinuous Aligned Fibre Filament (DcAFF), a novel discontinuous fibre reinforced thermoplastic filament for 3D printing, to produce structural complex parts. Compared to conventional composite manufacturing, 3D prin...

(This article belongs to the Special Issue 3D Printing and Additive Manufacturing of Polymer and Composites)
  • Article
  • Open Access
13 Citations
2,922 Views
11 Pages

3D-Printed Multi-Axis Alignment Airgap Dielectric Layer for Flexible Capacitive Pressure Sensor

  • Jeong-Beom Ko,
  • Soo-Wan Kim,
  • Hyeon-Beom Kim,
  • Hyeon-Yun Jeong and ,
  • Su-Yeong Moon and
  • Young-Jin Yang
  • + 1 author+ 0 author

31 October 2024

Flexible pressure sensors are increasingly recognized for their potential use in wearable electronic devices, attributed to their sensitivity and broad pressure response range. Introducing surface microstructures can notably enhance sensitivity; howe...

(This article belongs to the Section D1: Semiconductor Devices)
  • Article
  • Open Access
518 Views
13 Pages

11 September 2026

Direct-print aligners are widely presented as the environmentally preferable alternative to thermoforming, but which part of the process governs the carbon released during manufacture has not been established. Four commercial printer–resin work...

(This article belongs to the Topic Additive Manufacturing: From Promise to Practice)
  • Article
  • Open Access
3 Citations
1,524 Views
13 Pages

Evaluation of the Dimensional Accuracy of 3D-Printed Aligners: An In Vitro Study Using Reverse Engineering Analysis

  • Samuele Avolese,
  • Fabrizio Sanna,
  • Simone Parrini,
  • Giada Chiarello and ,
  • Danila Lava,
  • Ambra Sedran,
  • Andrea Deregibus and
  • Nicola Scotti
  • + 3 authors+ 0 author

Background: This study aimed to investigate the dimensional deformation that can occur during the fabrication of a 3D-printed aligner made with the TC-85 DAC resin (Graphy Inc., Seoul, Republic of Korea) and determine if the manual removal of the pri...

(This article belongs to the Special Issue Digital Design and Biomechanical Analysis of Dental Materials)
  • Article
  • Open Access
7 Citations
3,198 Views
11 Pages

In Vitro Investigation of the Mechanical Properties of Blended 3D-Printing Resins for Orthodontic Aligners: A Comparison between Commercial Resin and Nickel-Titanium Wire

  • Piero Antonio Zecca,
  • Salvatore Bocchieri,
  • Marina Borgese,
  • Carolina Dolci and ,
  • Alessandra Campobasso,
  • Giovanni Battista,
  • Alberto Caprioglio and
  • Mario Raspanti
  • + 3 authors+ 0 author

7 August 2023

This scientific article investigates the mechanical properties of a novel three-dimensional-printing resin specifically designed for orthodontic aligners and compares it to other commonly used resins. The resin was made by blending two commercially a...

(This article belongs to the Section Applied Dentistry and Oral Sciences)
  • Article
  • Open Access
291 Views
18 Pages

10 October 2026

Per-layer UV exposure during 3D printing may influence polymerization and the biological response of photocurable aligner resins. This study evaluated exposure-dependent cytotoxicity of Tera Harz TC-85 and NextDent Ortho Flex and performed an explora...

(This article belongs to the Special Issue 3D Printing Polymers: Design and Applications)
  • Article
  • Open Access
1,300 Views
11 Pages

Clear aligners are a popular alternative to fixed orthodontic appliances; however, technical data on the optimal final aligner shell thickness for directly printed aligners remain limited. This in vitro experimental pilot study evaluated the mechanic...

(This article belongs to the Section Development of Biomimetic Methodology)
  • Article
  • Open Access
8 Citations
3,222 Views
16 Pages

Effect of Curing Time and Nitrogen Generator Usage on Direct 3D-Printed Aligners Thicknesses—An In Vitro Micro-CT Study

  • Marco Migliorati,
  • Sara Drago,
  • Alberto Lagazzo,
  • Alessandra Campobasso and ,
  • Giovanni Battista,
  • Robert Kerberger,
  • Dieter Drescher and
  • Kathrin Becker
  • + 3 authors+ 0 author

1 November 2023

Many variables in the production of direct 3D-printed orthodontic aligners are currently tested to obtain an efficient and safe workflow. The aim of the present study was to investigate the effect of different curing times on the final thickness of t...

(This article belongs to the Special Issue 3D Printed Materials Dentistry II)
  • Case Report
  • Open Access
4 Citations
2,845 Views
17 Pages

1 November 2025

Background: Midpalatal suture expansion is effective in both growing and adult patients, and Miniscrew-Assisted Rapid Palatal Expansion (MARPE) provides greater skeletal effects and fewer dentoalveolar side effects than traditional expanders. However...

(This article belongs to the Section Dentistry, Oral Surgery and Oral Medicine)
  • Article
  • Open Access
5 Citations
2,544 Views
16 Pages

Forces and Moments Generated by Direct Printed Aligners During Bodily Movement of a Maxillary Central Incisor

  • Michael Lee,
  • Gabriel Miranda,
  • Julie McCray,
  • Mitchell Levine and
  • Ki Beom Kim

1 August 2025

The aim of this study was to compare the forces and moments exerted by thermoformed aligners (TFMs) and direct printed aligners (DPAs) on the maxillary left central incisor (21) and adjacent teeth (11, 22) during lingual bodily movement of tooth 21....

(This article belongs to the Special Issue Advances in Orthodontics and Dentofacial Orthopedics)
  • Article
  • Open Access
47 Citations
6,337 Views
15 Pages

Influence of Post-Processing on the Degree of Conversion and Mechanical Properties of 3D-Printed Polyurethane Aligners

  • Luka Šimunović,
  • Antonija Jurela,
  • Karlo Sudarević,
  • Ivana Bačić and ,
  • Tatjana Haramina and
  • Senka Meštrović
  • + 1 author+ 0 author

20 December 2023

Background: This study explores how different post-processing methods affect the mechanical properties and degree of conversion of 3d-printed polyurethane aligners made from Tera Harz TC-85 resin. Methods: Using Fourier-transform infrared (FTIR) spec...

(This article belongs to the Special Issue Advanced Polymeric Materials for Dental Applications II)
  • Communication
  • Open Access
13 Citations
3,787 Views
12 Pages

17 November 2021

Three-dimensional printing-based additive manufacturing has emerged as a new frontier in materials science, with applications in the production of functionalized polymeric-based hybrid composites for various applications. In this work, a novel concep...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
423 Views
24 Pages

18 September 2026

Directly printed clear aligners may streamline orthodontic workflows but must withstand intraoral aging. This in vitro study evaluated the effects of layer thickness (50, 100, and 150 µm) and thermocycling on mechanical, morphological, optical,...

(This article belongs to the Special Issue Polymers for Dental Applications: From New Materials and Processes to Clinical Translation)
  • Article
  • Open Access
16 Citations
5,258 Views
12 Pages

Magnetic Field Patterning of Nickel Nanowire Film Realized by Printed Precursor Inks

  • Chaitanya G. Mahajan,
  • Ahmed Alfadhel,
  • Mark Irving,
  • Bruce E. Kahn and ,
  • David A. Borkholder,
  • Scott A. Williams and
  • Denis Cormier
  • + 2 authors+ 0 author

20 March 2019

This paper demonstrates an easily prepared novel material and approach to producing aligned nickel (Ni) nanowires having unique and customizable structures on a variety of substrates for electronic and magnetic applications. This is a new approach to...

(This article belongs to the Section Advanced Nanomaterials and Nanotechnology)
  • Review
  • Open Access
22 Citations
13,803 Views
26 Pages

2 April 2025

Three-dimensional (3D) printing is transforming dentistry by enabling precise and personalized treatments in prosthodontics, orthodontics, and endodontics. However, challenges such as high costs, material limitations, and post-processing requirements...

(This article belongs to the Collection Digital Dentistry: State of the Art and Future Perspectives)
  • Article
  • Open Access
14 Citations
3,993 Views
10 Pages

Influence of Printing Orientation on Surface Roughness and Gloss of 3D Printed Resins for Orthodontic Devices

  • Cecilia Goracci,
  • Carlo Bosoni,
  • Patrizia Marti,
  • Nicola Scotti and ,
  • Lorenzo Franchi and
  • Alessandro Vichi
  • + 1 author+ 0 author

23 January 2025

The study aims to assess the effect of printing orientation on surface roughness and gloss of resins for 3D printing of aligners. Squared specimens (14 × 14 × 4 mm) were printed using Dental LT Clear (Formlabs, Somerville, MA, USA; LT) or...

(This article belongs to the Special Issue Orthodontic Materials: Properties and Effectiveness of Use)
  • Article
  • Open Access
3 Citations
3,562 Views
14 Pages

Surface Functionalization of 4D Printed Substrates Using Polymeric and Metallic Wrinkles

  • Johnson N. Agyapong,
  • Bo Van Durme,
  • Sandra Van Vlierberghe and
  • James H. Henderson

28 April 2023

Wrinkle topographies have been studied as simple, versatile, and in some cases biomimetic surface functionalization strategies. To fabricate surface wrinkles, one material phenomenon employed is the mechanical-instability-driven wrinkling of thin fil...

(This article belongs to the Special Issue Stimuli-Responsive Polymers)
  • Article
  • Open Access
13 Citations
4,331 Views
11 Pages

Effect of Model Body Type and Print Angle on the Accuracy of 3D-Printed Orthodontic Models

  • Stefan Lohfeld,
  • Bryndon Belnap,
  • Jean-Marc Retrouvey and
  • Mary P. Walker

The assortment of low-cost 3D printers for “in-practice” use, e.g., for clear aligner therapies, is ever increasing. To address concerns about the accuracy of orthodontic models produced on such printers when cost-efficient modes of 3D pr...

(This article belongs to the Special Issue Dentistry and Craniofacial District: The Role of Biomimetics—Second Edition)
  • Review
  • Open Access
36 Citations
10,157 Views
26 Pages

12 November 2024

Three-dimensional printing has transformed dentistry by enabling the production of customized dental restorations, aligners, surgical guides, and implants. A variety of polymers and composites are used, each with distinct properties. This review expl...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
21 Citations
4,303 Views
15 Pages

Printing Structurally Anisotropic Biocompatible Fibrillar Hydrogel for Guided Cell Alignment

  • Zhengkun Chen,
  • Nancy Khuu,
  • Fei Xu,
  • Sina Kheiri and ,
  • Ilya Yakavets,
  • Faeze Rakhshani,
  • Sofia Morozova and
  • Eugenia Kumacheva
  • + 3 authors+ 0 author

22 October 2022

Many fibrous biological tissues exhibit structural anisotropy due to the alignment of fibers in the extracellular matrix. To study the impact of such anisotropy on cell proliferation, orientation, and mobility, it is important to recapitulate and ach...

(This article belongs to the Special Issue Engineering Hydrogel for Biomedical Applications)
  • Review
  • Open Access
40 Citations
7,550 Views
19 Pages

Aligned Scaffolds with Biomolecular Gradients for Regenerative Medicine

  • Xiaoran Li,
  • Zhenni Chen,
  • Haimin Zhang,
  • Yan Zhuang and ,
  • He Shen,
  • Yanyan Chen,
  • Yannan Zhao,
  • Bing Chen,
  • Zhifeng Xiao and
  • Jianwu Dai
  • + 5 authors+ 0 author

15 February 2019

Aligned topography and biomolecular gradients exist in various native tissues and play pivotal roles in a set of biological processes. Scaffolds that recapitulate the complex structure and microenvironment show great potential in promoting tissue reg...

(This article belongs to the Special Issue Polymer Scaffolds for Biomedical Application)
  • Article
  • Open Access
33 Citations
11,769 Views
12 Pages

Towards Realizing High-Throughput, Roll-to-Roll Manufacturing of Flexible Electronic Systems

  • Xiaohui Lin,
  • Harish Subbaraman,
  • Zeyu Pan,
  • Amir Hosseini and ,
  • Chris Longe,
  • Klay Kubena,
  • Paul Schleicher,
  • Phillip Foster,
  • Sean Brickey and
  • Ray T. Chen
  • + 5 authors+ 0 author

14 November 2014

High-rate roll-to-roll (R2R) tracker systems are utilized for large volume flexible electronic device manufacturing, and the current alignment mechanism between layers is mainly achieved by relying on passive techniques. In this paper, we present a m...

(This article belongs to the Special Issue Flexible Electronics)
  • Protocol
  • Open Access
4 Citations
3,498 Views
7 Pages

Aligners are the common devices used in orthodontics for the correction of malocclusion. Various materials and techniques are employed to fabricate aligners. One of those includes thermoformed and 3D aligners. These aligners can be worn for several d...

(This article belongs to the Special Issue Customized Minimally Invasive Protocols for the Clinical and Microbiological Management of the Oral Microbiota)
  • Article
  • Open Access
81 Views
18 Pages

Initial Force Expression of Different Clear Aligner Systems in a Simulated Maxillary Canine Distalization Model with Lateral Incisor Agenesis: An In Vitro Comparative Study

  • Alessio Verdecchia,
  • Samuele Avolese,
  • Andrea Tancredi Lugas,
  • Cristina Bignardi and ,
  • Mara Terzini,
  • Claudia Dettori,
  • Enrico Spinas,
  • Teresa Cobo and
  • Nicola Scotti
  • + 4 authors+ 0 author

Background: This in vitro study compared initial force release by different clear aligner systems during simulated maxillary canine distalization with lateral incisor agenesis and evaluated attachment effects. Methods: Five aligner systems were teste...

(This article belongs to the Special Issue Dental Biomaterials: Current and Future Perspectives)
  • Article
  • Open Access
2 Citations
2,200 Views
12 Pages

17 July 2025

Background/Objectives: The introduction of composite attachments has greatly improved orthodontic aligner therapy, through better force delivery, more predictable movements, and enhanced retention. This in vitro study aims to present and investigate...

(This article belongs to the Special Issue Orthodontics: State of the Art and Perspectives)
  • Article
  • Open Access
1 Citations
1,326 Views
23 Pages

Single-Step Extrusion Printing of Microgrooved Annulus Fibrosus Scaffolds via Patterned Nozzles

  • Nadine Kluser,
  • Gion Ursin Alig,
  • Christoph Sprecher,
  • Xavier Woods and ,
  • Sibylle Grad,
  • Mauro Alini,
  • Sonja Häckel,
  • Christoph E. Albers,
  • David Eglin and
  • Andrea J. Vernengo
  • + 6 authors+ 1 author

Intervertebral disk pathology, including disk herniation and degeneration, is a major contributor to chronic low back pain, and when conservative treatment fails, surgical management often involves discectomy-based procedures that leave residual annu...

(This article belongs to the Section Biomaterials for Tissue Engineering and Regenerative Medicine)
  • Article
  • Open Access
3 Citations
3,328 Views
10 Pages

Consistency and Reliability Analyses of a Comprehensive Index for the Evaluation of Teeth Alignment Performance

  • Andrea Mapelli,
  • Marco Serafin,
  • Carolina Dolci,
  • Daniele Gibelli and ,
  • Alberto Caprioglio,
  • Chiarella Sforza and
  • Gianluca Martino Tartaglia
  • + 2 authors+ 0 author

16 February 2022

(1) Introduction: The purpose of this work was to describe a method and propose a novel accuracy index to assess orthodontic alignment performance. (2) Methods: Fifteen patients who underwent orthodontic treatment using directly printed clear aligner...

(This article belongs to the Collection Digital Dentistry: Advances and Challenges)
  • Article
  • Open Access
6 Citations
2,856 Views
21 Pages

10 October 2025

This study aimed to evaluate the effect of resin type and printing design on the dimensional accuracy of three dimensional (3D) printed orthodontic models, considering their clinical relevance for applications such as in-house aligner fabrication. Si...

(This article belongs to the Section Polymer Applications)

of 12