Skip to Content

268 Results Found

  • Article
  • Open Access
9 Citations
3,144 Views
11 Pages

11 August 2023

The importance of understanding the energy loss specifics by the cathode for vacuum arc metallic plasma generation and its applications were emphasized. To this end, the heat conduction losses per unit current were characterized by the cathode effect...

(This article belongs to the Special Issue Feature Papers in Plasma Sciences 2023)
  • Review
  • Open Access
28 Citations
7,554 Views
26 Pages

26 April 2024

A vacuum arc is an electrical discharge, in which the current is supported by localized cathode heating and plasma generation in minute regions at the cathode surface called cathode spots. Cathode spots produce a metallic plasma jet used in many appl...

(This article belongs to the Special Issue Latest Review Papers in Plasma Science 2023)
  • Article
  • Open Access
9 Citations
6,820 Views
26 Pages

7 December 2021

Recent designs have allowed hollow cathode gas plasma sources to be adopted for use in plasma-enhanced atomic layer deposition with the benefit of lower oxygen contamination for non-oxide films (a brief review of this is provided). From a design pers...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Feature Paper
  • Article
  • Open Access
3 Citations
4,068 Views
7 Pages

Externally Heated Hollow Cathode Arc Plasma Source for Experiments in Plasma Wakefield Acceleration

  • Ryan Roussel,
  • Gerard Andonian,
  • Claire Hansel,
  • Gerard Lawler and ,
  • Walter Lynn,
  • Nathan Majernik,
  • River Robles,
  • Kunal Sanwalka,
  • Eric Wisniewski and
  • James Rosenzweig
  • + 5 authors+ 0 author

An externally heated, hollow cathode arc source was recommissioned at UCLA for use in experiments to drive plasma wakefields with shaped beams at the Argonne Wakefield Accelerator. The hollow cathode arc source provides a robust plasma column with a...

(This article belongs to the Special Issue Physics and Applications of High Brightness Beams)
  • Article
  • Open Access
10 Citations
4,710 Views
9 Pages

YSZ/LSM Composite Cathode Deposited by Solution Precursor Plasma Spraying

  • Xiaoming Wang,
  • Boen Tang,
  • Penghui Wen,
  • Weiping Dong and ,
  • Linlin Wang and
  • Dongyun Wang
  • + 1 author+ 0 author

28 February 2022

In this paper, solution precursor plasma spraying (SPPS) was employed to prepare a porous YSZ/LSM composite cathode for solid oxide fuel cell (SOFC). The surface morphology and microstructure of the composite cathode deposits were characterized using...

(This article belongs to the Topic Inorganic Thin Film Materials)
  • Article
  • Open Access
2 Citations
2,473 Views
17 Pages

3 July 2024

Orifice Hollow Cathodes are electric devices necessary for the functioning of common plasma thrusters for space applications. Their reliability mainly depends on the success of a spacecraft’s mission equipped with electric propulsion. The devel...

(This article belongs to the Section Applied Physics General)
  • Article
  • Open Access
4 Citations
2,441 Views
12 Pages

6 September 2022

The TriplexPro™-210 plasma spray torch (Oerlikon Metco) is a three-cathode plasma generator. It became a kind of workhorse for the wide range of tasks handled at the Jülich Thermal Spray Center (JTSC). Compared to conventional single-catho...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
366 Views
23 Pages

Activation of the Internal Surfaces of Polymer Tubes with Argon Plasma Through Hollow Cathode Effect

  • Jang-Hsing Hsieh,
  • Jyh Wei Lee,
  • Chuan Li,
  • Stephen Hsieh and ,
  • Shin Yo Shen and
  • Nima Bolouki
  • + 1 author+ 0 author

3 October 2026

The focus of this study is on generating hollow cathode discharge (HCD) plasma inside three types of polymer tubes, resulting in the activation of the tubes’ inner surfaces. To achieve this goal, both theoretical calculations and experiments we...

(This article belongs to the Special Issue Advances in Plasma-Modified Polymeric Materials for Surface Functionalization and Applications)
  • Review
  • Open Access
13 Citations
5,158 Views
26 Pages

7 August 2024

Cathodic plasma electrolytic treatment (CPET) is an emerging surface modification and coating preparation technology. By utilizing plasma discharge induced through electrolysis and the cooling impact of electrolyte, metal cleaning, saturation, and co...

(This article belongs to the Special Issue The Design, Preparation, and Mechanical Properties of New Metallic Materials and Alloys)
  • Article
  • Open Access
14 Citations
3,971 Views
20 Pages

Effect of Rapid Hollow Cathode Plasma Nitriding Treatment on Corrosion Resistance and Friction Performance of AISI 304 Stainless Steel

  • Jinpeng Lu,
  • Haichun Dou,
  • Zelong Zhou,
  • Haihong Li and ,
  • Zhengwei Wang,
  • Mingquan Jiang,
  • Fengjiao Li,
  • Yue Gao,
  • Chenyu Song and
  • Yang Li
  • + 7 authors+ 2 authors

12 December 2023

Low-temperature plasma nitriding of austenitic stainless steel can ensure that its corrosion resistance does not deteriorate, improving surface hardness and wear performance. Nevertheless, it requires a longer processing time. The hollow cathode disc...

(This article belongs to the Special Issue Surface Engineering & Coating Technologies for Corrosion and Tribocorrosion Resistance—Volume II)
  • Article
  • Open Access
11 Citations
2,817 Views
18 Pages

Scratch Response of Hollow Cathode Radiofrequency Plasma-Nitrided and Sintered 316L Austenitic Stainless Steel

  • Marcelo Broch,
  • Cristian Padilha Fontoura,
  • Arnaldo Oliveira Lima,
  • Michell Felipe Cano Ordoñez and ,
  • Izabel Fernanda Machado,
  • Cesar Aguzzoli and
  • María Cristina Moré Farias
  • + 2 authors+ 0 author

12 March 2024

Low-temperature plasma nitriding is a thermochemical surface treatment that promotes surface hardening and wear resistance enhancement without compromising the corrosion resistance of sintered austenitic stainless steels. Hollow cathode radiofrequenc...

(This article belongs to the Special Issue Tribological and Mechanical Properties of Coatings)
  • Article
  • Open Access
3 Citations
3,178 Views
17 Pages

Tailoring Black TiO2 Thin Films: Insights from Hollow Cathode Hydrogen Plasma Treatment Duration

  • Armstrong Godoy-Junior,
  • André Pereira,
  • Barbara Damasceno,
  • Isabela Horta and ,
  • Marcilene Gomes,
  • Douglas Leite,
  • Walter Miyakawa,
  • Maurício Baldan,
  • Marcos Massi and
  • Argemiro da Silva Sobrinho
  • + 6 authors+ 1 author

1 June 2023

In this study, we report the use of a radiofrequency plasma-assisted chemical vapor deposition (RF-CVD) system with a hollow cathode geometry to hydrogenate anatase TiO2 thin films. The goal was to create black TiO2 films with improved light absorpti...

(This article belongs to the Special Issue Feature Papers in Plasma Sciences 2023)
  • Article
  • Open Access
6 Citations
2,464 Views
18 Pages

Low Current Density Cathode Plasma Electrolytic Deposition of Aluminum Alloy Based on a Bipolar Pulse Power Supply

  • Hang Li,
  • Guochen Zhao,
  • Huan Yu,
  • Kaiming Cheng and ,
  • Xuansheng Feng,
  • Yunteng Liu,
  • Jixue Zhou,
  • Minghua Bai,
  • Fengyao Ni and
  • Zhizhuang Sun
  • + 6 authors+ 1 author

The present paper reported a novel bipolar-pulse cathodic plasma electrolytic deposition (BP-CPED) technique with a low current density. This newly developed CPED technique can break down the barriers of the existing CPED technique with higher curren...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
8 Citations
5,116 Views
14 Pages

Influence of Solvent and Electrical Voltage on Cathode Plasma Electrolytic Deposition of Al2O3 Antioxidation Coatings on Ti-45Al-8.5Nb Alloys

  • Xu Yang,
  • Zhipeng Jiang,
  • Xianfei Ding,
  • Guojian Hao and ,
  • Yongfeng Liang and
  • Junpin Lin
  • + 1 author+ 0 author

1 May 2018

Al2O3 coatings were prepared on Ti-45Al-8.5Nb alloys via cathodic plasma electrolysis deposition (CPED) in both 1.2 M Al(NO3)3 aqueous and ethanolic solutions. Different voltages were also applied during the deposition process to optimize coating pro...

(This article belongs to the Special Issue Plasmas Processes Applied on Metals and Alloys)
  • Article
  • Open Access
2 Citations
2,975 Views
10 Pages

23 September 2021

WC-Co cermet was plasma-nitrided with the assistance of a hollow cathode ion source at 400 °C under a vacuum of 3–8 Pa. Hot film chemical vapor deposition (HFCVD) of a diamond coating was carried out on the nitrided specimen, without chemical etching...

(This article belongs to the Section Thin Films)
  • Article
  • Open Access
8 Citations
3,712 Views
17 Pages

Improvement of Structures and Properties of Al2O3 Coating Prepared by Cathode Plasma Electrolytic Deposition by Incorporating SiC Nanoparticles

  • Xianjia Li,
  • Zhi Li,
  • Rui Zhou,
  • Bin Wang and ,
  • Yu Wang,
  • Husheng Li,
  • Tao He,
  • Yushan Ma,
  • Tao Ge and
  • Yu Bai
  • + 6 authors+ 1 author

24 April 2022

A serious issue in the preparation of Al2O3 coatings by cathode plasma electrolytic deposition (CPED) is that the coatings have a porous structure, which is detrimental to their protective performance. Therefore, to address this problem, SiC nanopart...

(This article belongs to the Special Issue New Advances in Ceramic Coatings and Its Applications)
  • Article
  • Open Access
4 Citations
3,136 Views
15 Pages

Magnesium Oxide Powder Synthesis in Cathodic Arc Discharge Plasma in an Argon Environment at Atmospheric Pressure

  • Dmitry Sorokin,
  • Konstantin Savkin,
  • Dmitry Beloplotov,
  • Viktor Semin and ,
  • Andrey Kazakov,
  • Alisa Nikonenko,
  • Alexander Cherkasov and
  • Konstantin Shcheglov
  • + 3 authors+ 0 author

11 July 2023

Discharges with cathode spots can operate in a wide range of gas pressures. Erosion of the cathode material is an inherent property of such discharges. The erosion products are considered to be ionized atoms and electrically neutral microdroplets. In...

  • Article
  • Open Access
49 Citations
8,308 Views
17 Pages

Black TiO2 Thin Films Production Using Hollow Cathode Hydrogen Plasma Treatment: Synthesis, Material Characteristics and Photocatalytic Activity

  • Armstrong Godoy Junior,
  • André Pereira,
  • Marcilene Gomes,
  • Mariana Fraga and ,
  • Rodrigo Pessoa,
  • Douglas Leite,
  • Gilberto Petraconi,
  • Adailton Nogueira,
  • Heberton Wender and
  • Argemiro da Silva Sobrinho
  • + 7 authors+ 2 authors

2 March 2020

Black TiO2 materials have been quite widely explored due to their large solar absorption and superior photocatalytic activity. In this paper, the blackening process of titanium dioxide (TiO2) thin film using the hollow cathode hydrogen plasma (HCHP)...

(This article belongs to the Special Issue TiO2 for Photocatalytic Applications)
  • Article
  • Open Access
1 Citations
3,637 Views
29 Pages

Low-Current High-Voltage Pulsed Atmospheric Arc Plasma Jet: Nanoparticle Emission from the Cathodic Spot

  • Dariusz Korzec,
  • Florian Freund,
  • Isabelle Doelfs,
  • Florian Zacherl and ,
  • Lucas Kudala and
  • Hans-Peter Rabl
  • + 1 author+ 0 author

28 October 2025

The atmospheric pressure plasma jet (APPJ) is a popular type of cold atmospheric plasma (CAP). APPJs based on a pulsed atmospheric arc (PAA) are widely spread in industrial processing. A plasma jet of this type, PlasmaBrush PB3 (PB3), is a subject of...

(This article belongs to the Special Issue Feature Papers in Plasma Sciences 2025)
  • Article
  • Open Access
13 Citations
3,872 Views
14 Pages

The Effect of Cathodic Cage Plasma TiN Deposition on Surface Properties of Conventional Plasma Nitrided AISI-M2 Steel

  • Luiz Henrique Portela de Abreu,
  • Muhammad Naeem,
  • Renan Matos Monção,
  • Thercio H. C. Costa and ,
  • Juan C. Díaz-Guillén,
  • Javed Iqbal and
  • Rômulo Ribeiro Magalhães Sousa
  • + 2 authors+ 0 author

2 June 2022

In this study, a combination of conventional plasma nitriding and cathodic cage plasma deposition (CCPD) at different temperatures (400 and 450 °C) is implemented to enhance the surface properties of AISI-M2 steel. This combination effectively im...

(This article belongs to the Special Issue Advances in Low-Temperature Nitriding and Carburizing of Stainless Steels and Metallic Materials: Formation and Properties)
  • Article
  • Open Access
12 Citations
3,408 Views
28 Pages

Influence of Cathodic Polarization on Plasma Electrolytic Oxidation of Magnesium and AZ31 and AZ91 Magnesium Alloys

  • Zhengzhou Le,
  • Zihua Liu,
  • Xiaorui He,
  • Yulin Cheng and ,
  • Panfeng Hu and
  • Yingliang Cheng
  • + 1 author+ 0 author

6 October 2023

In this study, the influence of cathodic polarization on the plasma electrolytic oxidation (PEO) behaviors of pure magnesium and AZ31 and AZ91 magnesium alloys with varied Al alloying contents was systematically examined in a dilute alkaline silicate...

(This article belongs to the Special Issue Plasma Electrolytic Oxidation (PEO) Coatings, 2nd Edition)
  • Article
  • Open Access
3 Citations
2,867 Views
12 Pages

Study of the Role of Titanium and Iron Cathodic Cages on Plasma-Nitrided AISI 430 Ferritic Stainless Steel

  • Mirza Z. Babur,
  • Aiyah S. Noori,
  • Zafar Iqbal,
  • Muhammad Shafiq and ,
  • Muhammad Asghar,
  • Abdulaziz H. Alghtani,
  • Vineet Tirth,
  • Ali Algahtani and
  • Abid Zaman
  • + 4 authors+ 0 author

14 October 2022

In contrast to austenitic and martensitic stainless steels, ferritic stainless steels have a lower hardness and wear resistance but exhibit excellent corrosion resistance. Due to this fact, their use in the aerospace, automobile, and house constructi...

(This article belongs to the Special Issue Microwave Passive Components)
  • Article
  • Open Access
16 Citations
2,665 Views
14 Pages

5 September 2024

In order to improve the wear and corrosion resistance of Ti6Al4V alloy, a Ti-N compound layer was formed on the alloy by plasma nitriding at a relatively low temperature (750 °C) and within an economical processing duration (4 h), in a mixture of...

  • Article
  • Open Access
1 Citations
5,181 Views
9 Pages

Plasma-Enhanced Carbon Nanotube Fiber Cathode for Li-S Batteries

  • Yanbo Fang,
  • Yu-Yun Hsieh,
  • Mahnoosh Khosravifar,
  • Paa Kwasi Adusei and ,
  • Sathya Narayan Kanakaraj,
  • Bely Stockman,
  • Vamsi Krishna Reddy Kondapalli and
  • Vesselin Shanov
  • + 3 authors+ 0 author

22 May 2022

Fiber-shaped batteries have attracted much interest in the last few years. However, a major challenge for this type of battery is their relatively low energy density. Here, we present a freestanding, flexible CNT fiber with high electrical conductivi...

(This article belongs to the Collection Novel Applications of Carbon Nanotube-Based Materials)
  • Article
  • Open Access
6 Citations
3,076 Views
15 Pages

Novel Synthesis of Zinc Oxide on Cotton Fabric by Cathodic Cage Plasma Deposition for Photocatalytic and Antibacterial Performance

  • Rayane Saory Medeiros dos Santos,
  • Muhammad Naeem,
  • Anderson Lucas da Silva,
  • Michelle De Medeiros Aires and ,
  • Rômulo R. Magalhães de Sousa,
  • Thércio Henrique de Carvalho Costa,
  • Hugo Alexandre Oliveira Rocha,
  • Maria Celeste Nunes De Melo and
  • Michelle Cequeira Feitor
  • + 4 authors+ 0 author

23 September 2024

Cotton fabrics with zinc oxide (ZnO) coating are of significant interest due to their excellent antibacterial performance. Thus, they are widely in demand in the textile industry due to their medical and hygienic properties. However, conventional tec...

(This article belongs to the Section Materials Science)
  • Article
  • Open Access
4 Citations
3,432 Views
10 Pages

12 October 2018

In order to study the effect of duty cycle during the cathodic plasma electrolytic deposition (CPED) process, Al2O3 ceramic coatings were fabricated via the CPED technique on prepared TiAl alloy in an Al(NO3)3 electrolyte with different duty cycles....

(This article belongs to the Special Issue Advanced Technology for Materials Synthesis and Processing)
  • Article
  • Open Access
11 Citations
4,424 Views
14 Pages

Development of a Global Model for the Analysis of Plasma in an Atmosphere-Breathing Cathode-Less Thruster

  • Simone Dalle Fabbriche,
  • Nabil Souhair,
  • Mirko Magarotto,
  • Raoul Andriulli and ,
  • Enrico Corti and
  • Fabrizio Ponti
  • + 1 author+ 0 author

This study investigates the preliminary propulsive performances of a cathode-less plasma thruster with air as its propellant. The analysis is carried out through a global model and simulates a thruster over a power range of 0 to 50 W. The developed c...

(This article belongs to the Special Issue Numerical Simulations in Electric Propulsion)
  • Article
  • Open Access
14 Citations
9,141 Views
14 Pages

19 January 2023

Atmosphere-breathing electric propulsion (ABEP) is a type of electric propulsion system that uses the atmosphere as a propellant source instead of a stored reservoir. This technology is still in its early stages, but holds the promise of providing a...

(This article belongs to the Special Issue Aerospace Combustion Engineering)
  • Article
  • Open Access
7 Citations
2,686 Views
12 Pages

Numerical Analysis of Thermal Flow Dynamics of Arc Plasma and Molten Pool in Hollow Cathode Arc Welding with Oxygen Content

  • Yicheng Yang,
  • Bing Du,
  • Jihua Huang,
  • Zhen Lei and ,
  • Fujia Xu,
  • Qian Sun,
  • Pengyu Wei and
  • Daqing Wang
  • + 3 authors+ 0 author

25 March 2024

The mechanism of the pulsed hollow cathode arc welding (HCAW) process was revealed using a fully coupled model with a hollow cathode. We solved the governing equations with the Marangoni effect to study the dynamic behaviors of a molten pool with a s...

(This article belongs to the Section High-Energy Beam Surface Engineering and Coatings)
  • Article
  • Open Access
4 Citations
2,628 Views
19 Pages

Computational Analysis of Flow Separation in Non-Transferred Plasma Torch: Causes, Impacts and Control Methods

  • Sai Likitha Siddanathi,
  • Lars-Göran Westerberg,
  • Hans O. Åkerstedt,
  • Per Gren and ,
  • Henrik Wiinikka and
  • Alexey Sepman
  • + 1 author+ 0 author

12 February 2025

In a non-transferred plasma torch, the working gas becomes ionized and forms plasma as it interacts with the electric arc at the cathode tip. However, in certain cathode shapes, particularly flat ones, and under specific conditions, the gas flow can...

  • Article
  • Open Access
2 Citations
2,582 Views
6 Pages

Beam-Plasma Stabilizer for the New Type of Nuclear Power Energy Systems

  • Alexander Mustafaev,
  • Artem Grabovskiy,
  • Alexander Krizhanovich and
  • Vladimir Sukhomlinov

2 December 2021

In this paper the electrokinetic characteristics of helium low-voltage beam discharge plasma in operating conditions of a three-electrode device with a hot cathode are studied. A method and a device are proposed to ensure effective voltage stabilizat...

(This article belongs to the Section Earth Sciences)
  • Article
  • Open Access
790 Views
20 Pages

1 July 2026

This paper presents a conducting-channel model aimed at elucidating the generation of high-energy particles within a plasma chamber. Initially, the chamber is charged with neutral hydrogen gas at a density of approximately ~3.3 × 1022/m3, equiv...

  • Article
  • Open Access
8 Citations
4,954 Views
11 Pages

Performance of TiB2 Wettable Cathode Coating

  • Bo Yang,
  • Ruzhen Peng,
  • Dan Zhao,
  • Ni Yang and ,
  • Yanqing Hou and
  • Gang Xie
  • + 1 author+ 0 author

24 December 2021

A TiB2 wettable cathode coating was deposited on a graphite carbon cathode material via atmospheric plasma spraying (APS). The microstructure and phase composition of the TiB2 coating were analyzed via scanning electron microscopy (SEM), X-ray diffra...

(This article belongs to the Special Issue Chemical Engineering and Technology in Mineral Processing and Extractive Metallurgy)
  • Article
  • Open Access
2 Citations
2,877 Views
7 Pages

Characteristics of a Source for Oxide Coating Deposition by the Electron-Beam Evaporation of Dielectric Materials

  • Viktor Burdovitsin,
  • Ilya Bakeev,
  • Kirill Karpov,
  • Lionel Ngon A. Kiki and ,
  • Efim Oks and
  • Alexey Vizir
  • + 1 author+ 0 author

25 May 2022

We describe our investigations of a plasma-cathode electron source designed for the deposition of oxide coatings by the electron-beam evaporation of dielectric materials. Tests carried out using oxygen as the working gas showed that the source is ope...

(This article belongs to the Topic Applications of Photonics, Laser, Plasma and Radiation Physics)
  • Article
  • Open Access
3 Citations
2,631 Views
9 Pages

14 November 2022

A perovskite La1−xSrxMnO3 cathode thin film for an oxygen ion conducting solid oxide fuel cell was prepared using a low power (8.8 kW) liquid solution plasma spray method. Usually, a 30–50 kW Ar plasma torch with temperature higher than a...

(This article belongs to the Special Issue Advances of Solid Oxide Fuel Cells)
  • Article
  • Open Access
8 Citations
1,755 Views
18 Pages

24 February 2025

Soft sparking is a phenomenon observed during plasma electrolytic oxidation (PEO) performed under alternating current (AC) conditions. It is directly associated with the presence of cathodic polarization during the oxidation process, contributing to...

(This article belongs to the Special Issue Surface Engineering in Materials (2nd Edition))
  • Review
  • Open Access
34 Citations
4,699 Views
21 Pages

25 February 2021

Plasma electrolytic oxidation (PEO) has attracted increasing attention since the transportation industry adopts more lightweight metal components and requires an improved version of anodizing for surface protection. In response to the demand, researc...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
28 Citations
7,911 Views
9 Pages

11 October 2013

Multivalent cation rechargeable batteries are expected to perform well as high-capacity storage devices. Rechargeable magnesium batteries have an advantage in terms of resource utilization and safety. Here, we report on sulfur-doped vanadium pentoxi...

(This article belongs to the Special Issue Microwave Processing of Materials)
  • Article
  • Open Access
2 Citations
2,313 Views
13 Pages

Recycling and Reuse of Mn-Based Spinel Electrode from Spent Lithium-Ion Batteries

  • Arjun K. Thapa,
  • Abhinav C. Nouduri,
  • Mohammed Mohiuddin,
  • Hari Prasad Reddy Kannapu and ,
  • Lihui Bai,
  • Hui Wang and
  • Mahendra K. Sunkara
  • + 2 authors+ 0 author

12 August 2024

In this paper, we introduce an environmentally friendly approach to recycle used batteries and recover highly valuable manganese-based cathode materials. This study demonstrates the feasibility of fast plasma pyrolysis to recover LiMn2O4 electrode ma...

(This article belongs to the Section D: Energy Storage and Application)
  • Article
  • Open Access
9 Citations
6,056 Views
11 Pages

28 February 2019

A simple, novel approach is proposed for the preparation of plasma-exfoliated graphene (PEGN) by reducing graphene oxide (GO) through a dielectric-barrier discharge (DBD) plasma treatment in a H2 atmosphere. The surface chemistry, microstructures, an...

(This article belongs to the Special Issue Nanocarbon Based Composites)
  • Article
  • Open Access
1 Citations
1,811 Views
15 Pages

Influence of Plasma Assistance on EB-PVD TBC Coating Thickness Distribution and Morphology

  • Grzegorz Maciaszek,
  • Krzysztof Cioch,
  • Andrzej Nowotnik and
  • Damian Nabel

1 September 2025

In this study, the effects of plasma assistance on the electron beam physical vapour deposition (EB-PVD) process were investigated using an industrial coater (Smart Coater ALD Vacuum Technologies GmbH) equipped with a dual hollow cathode system. This...

(This article belongs to the Special Issue Advancements in Thin Film Deposition Technologies)
  • Review
  • Open Access
40 Citations
14,757 Views
26 Pages

A Review of Low-Power Electric Propulsion Research at the Space Propulsion Centre Singapore

  • George-Cristian Potrivitu,
  • Yufei Sun,
  • Muhammad Wisnuh Aggriawan bin Rohaizat,
  • Oleksii Cherkun and ,
  • Luxiang Xu,
  • Shiyong Huang and
  • Shuyan Xu
  • + 2 authors+ 0 author

The age of space electric propulsion arrived and found the space exploration endeavors at a paradigm shift in the context of new space. Mega-constellations of small satellites on low-Earth orbit (LEO) are proposed by many emerging commercial actors....

(This article belongs to the Special Issue Electric Propulsion)
  • Article
  • Open Access
2 Citations
2,349 Views
14 Pages

24 June 2021

The dynamically developing energy sector forces technologists to create new materials that meet the increasingly higher mechanical, chemical, and electrical requirements. The paper relates to the method of reducing the energy consumption of the plasm...

(This article belongs to the Special Issue Improvements of the Electricity Power System)
  • Review
  • Open Access
135 Citations
12,619 Views
22 Pages

1 February 2018

A dense inner layer is highly valued among the surface coatings created through plasma electrolytic oxidation (PEO) treatment, because the PEO coating has been troubled by inherent porosity since its conception. To produce the favored structure, a pr...

(This article belongs to the Special Issue Plasma Electrolytic Oxidation)
  • Article
  • Open Access
13 Citations
4,222 Views
10 Pages

Iron Oxide and Iron Sulfide Films Prepared for Dye-Sensitized Solar Cells

  • Kostyantyn Tuharin,
  • Zdeněk Turek,
  • Michal Zanáška,
  • Pavel Kudrna and
  • Milan Tichý

11 April 2020

In this paper, the prospects of iron oxide films and their sulfidation for dye-sensitized solar cells (DSSC) are reviewed. Iron oxide thin films were prepared by hollow cathode plasma jet (HCPJ) sputtering, with an admixture of oxygen in the argon wo...

(This article belongs to the Special Issue Carbon-Refractory Metals Nanostructures: Synthesis, Characterization and Applications)
  • Article
  • Open Access
6 Citations
2,384 Views
13 Pages

Facile Synthesis of Metal/Carbide Hybrid toward Overall Water Splitting

  • Junxiang Mo,
  • Nianqing Fu,
  • Songlin Mu,
  • Jihua Peng and ,
  • Yan Liu and
  • Guoge Zhang
  • + 1 author+ 0 author

18 October 2024

The development of cost-effective and high-performance bifunctional catalysts for overall water splitting is crucial for achieving sustainable clean energy. In this study, a metal/carbide hybrid (NiFeMo/NiFeMoCx) was prepared through fast and facile...

(This article belongs to the Special Issue Recent Applications of Metal Catalysts in Organic Synthesis, 2nd Edition)
  • Article
  • Open Access
1,363 Views
14 Pages

Preparation of a Novel Carbon Nano Coating on Carbon Fiber Surface Based on Plasma Electrolysis Effect

  • Xin He,
  • Qian Zhou,
  • Maoyuan Li,
  • Dongqin Li and ,
  • Chiyuhao Huang,
  • Xiaolin Wei and
  • Weiwei Chen
  • + 2 authors+ 0 author

1 September 2025

In this study, glucose is used as the source of C; through cathode plasma electrolytic deposition technology, a carbon nano coating is prepared on the surface of carbon fiber. The carbon coating is analyzed using scanning electron microscopy, transmi...

(This article belongs to the Section Carbon Materials)
  • Article
  • Open Access
3 Citations
3,678 Views
11 Pages

18 February 2020

Motional Stark effect (MSE) spectroscopy represents a unique diagnostic tool capable of determining the magnitude of the magnetic field and its direction in the core of fusion plasmas. The primary excitation channel for fast hydrogen atoms in injecte...

  • Article
  • Open Access
6 Citations
2,671 Views
15 Pages

2 August 2023

We have assessed new anodic coloring materials that can be used as ion storage layers in complementary energy storage electrochromic devices (ESECDs) to enhance their electrochromic storage performance. In our study, we fabricated counter electrodes...

(This article belongs to the Topic Energy Storage and Conversion: From Materials to Technologies)
  • Article
  • Open Access
2 Citations
3,062 Views
13 Pages

Indium Oxide Powder Synthesis in a Low-Current Discharge Plasma at Atmospheric Pressure

  • Konstantin Savkin,
  • Dmitry Sorokin,
  • Dmitry Beloplotov,
  • Marina Ostapenko and ,
  • Viktor Semin and
  • Efim Oks
  • + 1 author+ 0 author

13 January 2023

The results of a study of the processes involved in the production of indium oxide In2O3 powder, which is widely used to create transparent and electrically conducting ceramics, are described. The powder was produced in a flow of rare gas (argon or h...

(This article belongs to the Special Issue Advances in Ceramics)

of 6