Skip to Content

149 Results Found

  • Article
  • Open Access
438 Views
18 Pages

Semi-Theoretical Modeling and Experimental Validation of the Extrusion Swell Ratio of Highly Concentrated Silver Paste in Micro-Extrusion

  • Zhijie Huang,
  • Shixiong Wu,
  • Zhichao Yuan,
  • Zeyu Wang and ,
  • Cuimin Sun and
  • Hui You
  • + 1 author+ 0 author

17 July 2026

In micro-extrusion and direct ink writing, the nozzle outlet diameter is often used to estimate the deposited line width or free-filament diameter. However, highly loaded conductive silver pastes may exhibit pronounced extrusion swell after leaving t...

(This article belongs to the Special Issue Advances in Additive Manufacturing Technologies for Architected Materials)
  • Article
  • Open Access
5 Citations
4,347 Views
19 Pages

A continuous mixing process with a twin-screw extruder was investigated for graphite-based negative electrode pastes for high-power applications. In the extrusion-based mixing process, the first kneading concentration is one of the key processing par...

(This article belongs to the Special Issue Batteries: 10th Anniversary)
  • Article
  • Open Access
2 Citations
828 Views
27 Pages

Additive Manufacturing of Layered Nb-Al2O3 Composite Granules Based on Paste Extrusion

  • Tilo Zienert,
  • Dinesh Kumar Gunasekar,
  • Dirk Endler,
  • Christina Faßauer and
  • Christos G. Aneziris

16 January 2026

How would it be possible to functionalize ceramic aggregates for use in refractories? In this work, we demonstrate how paste extrusion can be used to fabricate layered and porous Nb-Al2O3-based composite refractories for adjusting thermal and electri...

(This article belongs to the Special Issue Mechanical and Functional Properties of Metal–Ceramic Composites for Harsh Environments)
  • Feature Paper
  • Article
  • Open Access
10 Citations
5,379 Views
19 Pages

Insight into the Gluten-Free Dough and Bread Properties Obtained from Extruded Rice Flour: Physicochemical, Mechanical, and Molecular Studies

  • Maria Barbara Różańska,
  • Patrycja Kokolus,
  • Jakub Królak,
  • Patrycja Jankowska and ,
  • Agata Osoś,
  • Magda Romanowska,
  • Łukasz Szala,
  • Przemysław Łukasz Kowalczewski,
  • Jacek Lewandowicz and
  • Sylwia Mildner-Szkudlarz
  • + 7 authors+ 2 authors

22 March 2023

The present study aimed to evaluate the effect of the extrusion process and particle size on the properties of rice flour (microstructure, pasting properties), gluten-free dough (rheological properties), and bread (texture, specific volume, water abs...

(This article belongs to the Special Issue Thermal and Non-thermal Processes in the Food Industry)
  • Article
  • Open Access
26 Citations
20,527 Views
13 Pages

Paste Extruder—Hardware Add-On for Desktop 3D Printers

  • Catalin Gheorghe Amza,
  • Aurelian Zapciu and
  • Diana Popescu

This paper presents the design, development and testing of a paste/clay extrusion device intended to be used as a drop-in replacement for the conventional thermoplastic extruder of a desktop filament-based 3D printer. A plastic cylinder loaded with g...

  • Article
  • Open Access
54 Citations
5,166 Views
20 Pages

Twin-Screw Extrusion of Oat: Evolutions of Rheological Behavior, Thermal Properties and Structures of Extruded Oat in Different Extrusion Zones

  • Chengyi Zhou,
  • Min Wu,
  • Dongyu Sun,
  • Wenguang Wei and ,
  • Haoze Yu and
  • Tong Zhang
  • + 1 author+ 0 author

25 July 2022

Further investigation of material properties during the extrusion process is essential to achieve precise control of the quality of the extrudate. Whole oat flour was used to produce low moisture puffed samples by a twin-screw extruder. X-ray diffrac...

(This article belongs to the Special Issue Current Practice and Future Directions of Application of Puffed/Extruded Technologies in Food)
  • Article
  • Open Access
18 Citations
8,112 Views
17 Pages

6 August 2020

The objective was to modify functional properties of breadfruit flours using twin-screw extrusion and test the physicochemical properties of the extruded flours. Extruded breadfruit flours were produced with twin-screw extrusion using different last...

(This article belongs to the Section Food Engineering and Technology)
  • Article
  • Open Access
14 Citations
5,519 Views
22 Pages

28 February 2023

The effects of extrusion process parameters on the physicochemical, pasting and technological properties of ready-to-eat snacks were evaluated. The aim was to develop fortified extruded products with fig molasses by-product powder (FMP), which is cre...

(This article belongs to the Section Food Engineering and Technology)
  • Article
  • Open Access
746 Views
17 Pages

7 March 2026

3D printing (3DP) of cement-based systems (CBSs) is a highly demanded technology in the construction field. Material requirements include specific rheological conditions for proper extrusion, followed by fast stiffening and strength gain to allow the...

(This article belongs to the Special Issue 3D Printing Materials in Civil Engineering)
  • Article
  • Open Access
17 Citations
10,355 Views
32 Pages

Mycelium biocomposites are eco-friendly, cheap, easy to produce, and have competitive mechanical properties. However, their integration in the built environment as durable and long-lasting materials is not solved yet. Similarly, biocomposites from re...

(This article belongs to the Special Issue Biomimicry and 3D Printing of Living Materials: 2nd Edition)
  • Article
  • Open Access
65 Citations
12,282 Views
22 Pages

Extrusion-Based 3D Printing of Ceramic Pastes: Mathematical Modeling and In Situ Shaping Retention Approach

  • Fuwen Hu,
  • Tadeusz Mikolajczyk,
  • Danil Yurievich Pimenov and
  • Munish Kumar Gupta

28 February 2021

Extrusion-based three-dimensional (3D) printing methods are preferred and emerging approaches for freely digital fabrication of ceramics due to ease of use, low investment, high utilization of materials, and good adaptability to multi-materials. Howe...

(This article belongs to the Special Issue Additive and Subtractive Manufacturing of Advanced Materials: Applications, Future Trends and Perspectives of Industry 4.0)
  • Article
  • Open Access
20 Citations
4,032 Views
14 Pages

Extrusion-Based 3D Printing of Calcium Magnesium Phosphate Cement Pastes for Degradable Bone Implants

  • Lisa-Marie Götz,
  • Katharina Holeczek,
  • Jürgen Groll,
  • Tomasz Jüngst and
  • Uwe Gbureck

10 September 2021

This study aimed to develop printable calcium magnesium phosphate pastes that harden by immersion in ammonium phosphate solution post-printing. Besides the main mineral compound, biocompatible ceramic, magnesium oxide and hydroxypropylmethylcellulose...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
3 Citations
2,010 Views
12 Pages

Development of TiO2/ZrO2 Multi-Material Obtained from Ceramic Pastes for Material Extrusion

  • Arseniy Repnin,
  • Anton Sotov,
  • Anatoliy Popovich and
  • Dmitriy Masaylo

29 November 2023

The application of additive manufacturing method such as material extrusion (MEX) allows the successful fabrication of ceramic products, including multi-ceramic products. Promising materials in this research area are TiO2 and ZrO2 ceramics, which can...

(This article belongs to the Section D: Materials and Processing)
  • Article
  • Open Access
5 Citations
2,267 Views
18 Pages

23 November 2024

Cement-based 3D printing provides an opportunity to create cement-based elements with a hierarchy of structures and patterns that are not easily achievable using traditional casting techniques, thereby providing new possibilities for improving therma...

  • Review
  • Open Access
26 Citations
11,698 Views
53 Pages

16 November 2024

Additive manufacturing (AM) is a rapidly developing technical field that is becoming an irreplaceable tool to fabricate unique complex-shaped parts in aerospace, the automotive industry, medicine, and so on. One of the most promising directions for A...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
25 Citations
8,423 Views
18 Pages

The Effectiveness of Extruded-Cooked Lentil Flour in Preparing a Gluten-Free Pizza with Improved Nutritional Features and a Good Sensory Quality

  • Antonella Pasqualone,
  • Michela Costantini,
  • Michele Faccia,
  • Graziana Difonzo and ,
  • Francesco Caponio and
  • Carmine Summo
  • + 1 author+ 0 author

7 February 2022

Extruded-cooked lentil (ECL) flour was used to fortify (10/100 g dough) gluten-free pizza, which was compared with rice/corn-based pizza (control), and with pizza containing native lentil (NL) flour. Viscoamylograph and Mixolab data evidenced the hyd...

(This article belongs to the Special Issue Unconventional Ingredients for Innovative Cereal-Based Products)
  • Review
  • Open Access
51 Citations
14,711 Views
22 Pages

3D Printing Ceramics—Materials for Direct Extrusion Process

  • Eliza Romanczuk-Ruszuk,
  • Bogna Sztorch,
  • Daria Pakuła,
  • Ewa Gabriel and ,
  • Krzysztof Nowak and
  • Robert E. Przekop
  • + 1 author+ 0 author

1 February 2023

Additive manufacturing and 3D printing methods based on the extrusion of material have become very popular in recent years. There are many methods of printing ceramics, but the direct extrusion method gives the largest range of sizes of printed objec...

  • Article
  • Open Access
1,936 Views
16 Pages

Effect of Diatomite Content in a Ceramic Paste for Additive Manufacturing

  • Pilar Astrid Ramos Casas,
  • Andres Felipe Rubiano-Navarrete,
  • Yolanda Torres-Perez and
  • Edwin Yesid Gomez-Pachon

Ceramic pastes used in additive manufacturing offer several advantages, including low production costs due to the availability of raw materials and efficient processing methods, as well as a reduced environmental footprint through minimized material...

  • Article
  • Open Access
7 Citations
3,936 Views
12 Pages

Performance of Calcium Phosphate Cements in the Augmentation of Sheep Vertebrae—An Ex Vivo Study

  • Raimund W. Kinne,
  • Francesca Gunnella,
  • Elke Kunisch,
  • Sascha Heinemann and ,
  • Berthold Nies,
  • Stefan Maenz,
  • Victoria Horbert,
  • Bernhard Illerhaus,
  • René Huber and
  • Olaf Brinkmann
  • + 10 authors+ 5 authors

12 July 2021

Oil-based calcium phosphate cement (Paste-CPC) shows not only prolonged shelf life and injection times, but also improved cohesion and reproducibility during application, while retaining the advantages of fast setting, mechanical strength, and biocom...

(This article belongs to the Special Issue Bioceramics and Bioactive Glass-Based Composites)
  • Article
  • Open Access
17 Citations
3,869 Views
13 Pages

Optimization of Ceramic Paste Composition for 3D Printing via Robocasting

  • Szymon Przybyła,
  • Maciej Kwiatkowski,
  • Michał Kwiatkowski and
  • Marek Hebda

17 September 2024

This article presents a procedure for selecting optimal ceramic paste formulations dedicated to the 3D printing process using robocasting technology. This study investigated pastes with varying ceramic powder particle sizes and different proportions...

(This article belongs to the Special Issue Advances in Materials Processing (3rd Edition))
  • Article
  • Open Access
16 Citations
7,446 Views
11 Pages

17 July 2015

The quality of extrusion welding in the extruded hollow shapes is influenced significantly by the pressure and effective stress under which the material is being joined inside the welding chamber. However, extrusion welding was not accounted for in t...

  • Article
  • Open Access
1 Citations
1,189 Views
12 Pages

1 January 2026

Friction extrusion technology was first developed and patented in 1991 at The Welding Institute, but it remained largely unexplored for many years. Over the past decade, this technology has gained popularity due to its ability to recycle chips and pr...

  • Abstract
  • Open Access
1 Citations
1,503 Views
2 Pages

Si3N4 Parts Fabricated by Robocasting: Proof of Concept

  • Mónica S. Faria,
  • Filipe J. Oliveira,
  • Cristina M. Fernandes,
  • Daniel Figueiredo and
  • Susana Olhero

Additive manufacturing (AM) techniques in the category ‘material extrusion’, such as robocasting, can produce ceramic pieces from high-solid concentrated pastes [...]

(This article belongs to the Proceedings of MATERIAIS 2022)
  • Article
  • Open Access
9 Citations
2,109 Views
20 Pages

22 January 2026

Starches play a crucial role in determining the expansion, texture, and structural development of extruded meat analogs through their gelatinization behavior and interactions with proteins. In this study, corn, pea, tapioca, sweet potato, and potato...

(This article belongs to the Special Issue Food Gels: Fabrication, Characterization, and Application (2nd Edition))
  • Article
  • Open Access
4 Citations
2,452 Views
27 Pages

Physico-Chemical and Sensory Characteristics of Extruded Cereal Composite Flour Porridge Enriched with House Crickets (Acheta domesticus)

  • Tom Bbosa,
  • Dorothy Nakimbugwe,
  • Christophe Matthys,
  • Jolien Devaere and ,
  • Ann De Winne,
  • Deniz Zeynel Gunes and
  • Mik Van Der Borght
  • + 2 authors+ 0 author

20 August 2025

This study assessed the physico-chemical and sensory effects of enriching composite cereal porridges, typically consumed in Uganda, with undried house crickets (Acheta domesticus), a rich source of protein and vitamin B12. Composite flours containing...

(This article belongs to the Section Grain)
  • Article
  • Open Access
5 Citations
4,235 Views
20 Pages

Reorientation of Suspended Ceramic Particles in Robocasted Green Filaments during Drying

  • Bastien Dietemann,
  • Larissa Wahl,
  • Nahum Travitzky,
  • Harald Kruggel-Emden and ,
  • Torsten Kraft and
  • Claas Bierwisch
  • + 1 author+ 0 author

12 March 2022

This work considers the fabrication of ceramic parts with the help of an additive manufacturing process, robocasting, in which a paste with suspended particles is robotically extruded. Within the final part, the material properties depend on the orie...

(This article belongs to the Topic Material and Process Innovations for 3D Printing Applications)
  • Article
  • Open Access
2 Citations
2,285 Views
22 Pages

Pressure and Liquid Distribution under the Blade of a Basket Extruder of Continuous Wet Granulation of Model Material

  • Roman Fekete,
  • Peter Peciar,
  • Martin Juriga,
  • Štefan Gužela and ,
  • Michaela Peciarová,
  • Dušan Horváth and
  • Marian Peciar
  • + 2 authors+ 0 author

This study explores the influence of blade design on the low-pressure extrusion process, which is relevant to techniques like spheronization. We investigate how blade geometry affects the extruded paste and final product properties. A model paste was...

  • Article
  • Open Access
77 Citations
6,157 Views
16 Pages

23 October 2020

This study addressed the potential of 3D printing as a processing technology for delivering personalized healthy eating solutions to consumers. Extrusion-based 3D printing was studied as a tool to produce protein- and dietary fibre-rich snack product...

(This article belongs to the Special Issue 3D Food Printing: Future Outlook and Application in Food Sector)
  • Article
  • Open Access
4 Citations
1,982 Views
21 Pages

Physicochemical Characterization and Extrusion Effects on the Optimization of Agro-Industrial Byproduct Flour Formulation

  • Diana Paola Navia-Porras,
  • Carolina Franco-Urbano,
  • Laura Sofía Torres-Valenzuela,
  • José Luis Plaza-Dorado and
  • José Luis Hoyos-Concha

25 February 2025

During the post-harvest of coffee and plantain, organic residues with high potential for utilization are generated. This work aimed to measure the effect of extrusion on the nutritional, physicochemical, and functional properties of mixtures of coffe...

(This article belongs to the Special Issue Sustainability Challenges: Recovery and Valorization of Food Wastes and New Ingredients and Foods Development)
  • Article
  • Open Access
32 Citations
7,726 Views
24 Pages

9 July 2024

This study investigates the impact of dry heat pretreatment on the functionality of soy, chickpea, and pea protein ingredients for use in texturized vegetable protein (TVP) production via low moisture extrusion. The protein powders were heat-treated...

(This article belongs to the Special Issue Research on the Technologies of Food Extraction, Pressing and Extrusion)
  • Article
  • Open Access
12 Citations
4,421 Views
15 Pages

Physicochemical Changes of Heat-Treated Corn Grain Used in Ruminant Nutrition

  • Bojana Kokić,
  • Ljubica Dokić,
  • Lato Pezo,
  • Rade Jovanović and ,
  • Nedeljka Spasevski,
  • Jovana Kojić and
  • Miroslav Hadnađev
  • + 2 authors+ 0 author

30 August 2022

Cereal grain is processed using different combinations of heat, moisture, time, and mechanical action in order to improve its digestibility. The objective of the present research was to quantitatively represent the physicochemical properties of raw a...

(This article belongs to the Section Cattle)
  • Article
  • Open Access
11 Citations
3,465 Views
18 Pages

20 August 2024

Extrusion-based three-dimensional (3D) food printing (3DFP) enhances the customization of 3D-printed foods by using multiple food pastes. Post-printing processes like baking are usually necessary and significantly impact the stability of the 3D-print...

(This article belongs to the Special Issue Chemical and Physical Properties in Food Processing)
  • Article
  • Open Access
25 Citations
5,929 Views
15 Pages

Effect of Extrusion on the Crystalline Structure of Starch during RS5 Formation

  • Angel H. Cabrera-Ramírez,
  • Eliel Cervantes-Ramírez,
  • Eduardo Morales-Sánchez,
  • Mario E. Rodriguez-García and ,
  • María de la Luz Reyes-Vega and
  • Marcela Gaytán-Martínez
  • + 1 author+ 0 author

Amylose is well known to be organized helically with six glucose per turn, allowing it to form complexes with various ligands. This interaction can be affected by the type of crystalline structure present in the starch sources. This study evaluated t...

  • Article
  • Open Access
311 Views
20 Pages

Printability Assessment of 3D Printing Cement–Lime Mortars with Microencapsulated PCM

  • Alvaro Marquez,
  • Laura Ramallo,
  • Irene Palomar and
  • Gonzalo Barluenga

24 September 2026

An experimental study was conducted to evaluate the printability of cement–lime mortars designed for 3D printing applications, incorporating a microencapsulated phase-change material (PCM) and cellulose microfibers (CMFs). The influence of both...

(This article belongs to the Special Issue New Trends in Advanced Materials and Mechanical Behavior of Materials)
  • Article
  • Open Access
38 Citations
8,287 Views
18 Pages

Mechanochemical Applications of Reactive Extrusion from Organic Synthesis to Catalytic and Active Materials

  • Emanuela Calcio Gaudino,
  • Giorgio Grillo,
  • Maela Manzoli,
  • Silvia Tabasso and ,
  • Simone Maccagnan and
  • Giancarlo Cravotto
  • + 1 author+ 0 author

10 January 2022

In the past, the use of mechanochemical methods in organic synthesis was reported as somewhat of a curiosity. However, perceptions have changed over the last two decades, and this technology is now being appreciated as a greener and more efficient sy...

(This article belongs to the Special Issue Mechanochemical Synthesis of Organic Compounds)
  • Article
  • Open Access
1 Citations
512 Views
15 Pages

18 July 2026

The impact of nonionic surfactant (Tween 20 and Tween 80) addition during the chopping process on the surimi gel quality was investigated. Results showed that the addition of Tween 20 or Tween 80 significantly decreased myofibrillar protein solubilit...

(This article belongs to the Special Issue Aquatic Products Processing and Preservation Technology—2nd Edition)
  • Review
  • Open Access
415 Views
31 Pages

Extrusion is a core branch of advanced metal forming. Over the past century, it has evolved from conventional hot and cold extrusion into a diversified family of processes that now encompasses severe plastic deformation (SPD) techniques. The industri...

(This article belongs to the Special Issue Advances in Material Forming, 3rd Edition)
  • Review
  • Open Access
25 Citations
5,373 Views
21 Pages

Three-dimensional printing (3DP) technology in pharmaceutical areas is leading to a significant change in controlled drug delivery and pharmaceutical product development. Pharmaceutical industries and academics are becoming increasingly interested in...

(This article belongs to the Special Issue Pharmaceutical Applications of 3D Printing)
  • Article
  • Open Access
32 Citations
6,963 Views
11 Pages

Food Industry By-Products as Raw Materials in the Production of Value-Added Corn Snack Products

  • Antun Jozinović,
  • Drago Šubarić,
  • Đurđica Ačkar,
  • Jurislav Babić and ,
  • Vedran Orkić,
  • Sunčica Guberac and
  • Borislav Miličević
  • + 2 authors+ 0 author

26 April 2021

The addition of brewer’s spent grain (BSG), sugar beet pulp (SBP) and apple pomace (AP), on the nutritional properties of directly expanded snack products based on corn grits was investigated. Snack products were produced in a laboratory single screw...

(This article belongs to the Special Issue Food Industry By-Products as a Source of Phytochemical Compounds)
  • Article
  • Open Access
  • Best Paper Award
111 Citations
12,261 Views
17 Pages

3D Printing of Textured Soft Hybrid Meat Analogues

  • Tianxiao Wang,
  • Lovedeep Kaur,
  • Yasufumi Furuhata,
  • Hiroaki Aoyama and
  • Jaspreet Singh

6 February 2022

Meat analogue is a food product mainly made of plant proteins. It is considered to be a sustainable food and has gained a lot of interest in recent years. Hybrid meat is a next generation meat analogue prepared by the co-processing of both plant and...

(This article belongs to the Special Issue Processing Foods to Design Structures for Optimal Functionality)
  • Article
  • Open Access
560 Views
21 Pages

Characterization of Fibrous Protein Gel Network Properties in Brewer’s Yeast-Enhanced Meat Analogs Produced by High-Moisture Extrusion

  • Yu Zhang,
  • Yung-Hee Jeon,
  • Ayeon Han,
  • Gi-Hyung Ryu and ,
  • Bon-Jae Gu and
  • Da-Eun Jung
  • + 1 author+ 0 author

27 August 2026

The development of structured protein gel matrices with meat-like fibrous properties is a key challenge in the design of high-moisture meat analogs (HMMA). This study incorporated brewer’s yeast into a soy protein-wheat gluten-corn starch matri...

(This article belongs to the Special Issue Role and Function of Gels in Food Storage and Processing)
  • Article
  • Open Access
1 Citations
517 Views
21 Pages

26 May 2026

Propyl gallate (PG) is an effective food antioxidant, but its performance in food systems may be limited by poor water compatibility and processing instability. In this study, rice starch was used as a carrier matrix to prepare starch–PG comple...

(This article belongs to the Section Food Nutrition)
  • Article
  • Open Access
10 Citations
2,446 Views
22 Pages

Characterization of Extruded Sorghum-Soy Blends to Develop Pre-Cooked and Nutritionally Dense Fortified Blended Foods

  • Michael Joseph,
  • Qingbin Guo,
  • Brian Lindshield,
  • Akinbode A. Adedeji and
  • Sajid Alavi

25 February 2025

Food aid commodities are essential food items in global food aid programming. Some are primarily made from an extrusion of corn and soybeans. However, there are concerns about the genetically modified organisms (GMOs) of some of these grains. Hence,...

(This article belongs to the Special Issue Impacts of Innovative Processing Technologies on Food Quality)
  • Article
  • Open Access
2 Citations
2,195 Views
10 Pages

Paste-Injection of Low-Density Barium Hexaferrite Magnets with Soft Magnetic Iron Phase

  • Wannisa Thongsamrit,
  • Pongsakorn Jantaratana,
  • Thanida Charoensuk and
  • Chitnarong Sirisathitkul

1 October 2022

Permanent magnets of varying shapes and sizes are increasingly produced. For hexaferrite magnets, it is challenging to incorporate polymers and a soft magnetic phase in the form of paste before injection molding or extrusion free-forming. In this stu...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
16 Citations
4,493 Views
24 Pages

Advanced Refinement of Geopolymer Composites for Enhanced 3D Printing via In-Depth Rheological Insights

  • Abrar Gasmi,
  • Christine Pélegris,
  • Ralph Davidovits,
  • Mohamed Guessasma and ,
  • Hugues Tortajada and
  • Florian Jean
  • + 1 author+ 0 author

27 September 2024

The advancement of 3D printing technology has been remarkable, yet the quality of printed prototypes heavily relies on the rheological behavior of the materials used. This study focuses on optimizing geopolymer-based composite formulas to achieve hig...

(This article belongs to the Special Issue Innovative Manufacturing Processes of Silicate Materials)
  • Article
  • Open Access
558 Views
21 Pages

Functional and Structural Properties of Extruded Products Enriched with Mushroom-Fermented Flour

  • Antonella Mazzola,
  • Carolina Aranibar,
  • Francisco Kuhar,
  • Alina Greslebin and
  • Pablo D. Ribotta

29 September 2026

Extrusion technology enables the development of nutrient-dense snacks, but most commercial extrudates rely on nutrient-poor cereal flours. This study evaluates the effect of the incorporation of mushroom-fermented flours (MFF) from Ganoderma sessile...

(This article belongs to the Special Issue Structural Analysis and Properties of Active Compounds from Edible Mushrooms)
  • Article
  • Open Access
5 Citations
5,317 Views
9 Pages

11 March 2019

Additive manufacturing (AM), or 3D-printing, has the potential for rapid prototyping of innovative designs of magnetic components used in power electronics converters. In this study, we tailored a silver paste as the metal feedstock of an extrusion 3...

(This article belongs to the Special Issue Advanced Materials for Power Electronics)
  • Review
  • Open Access
72 Citations
16,819 Views
22 Pages

The development of innovative forms of combination drugs is closely related to the invention of the multilayer tablet press, polymers for pharmaceutical applications, the hot-melt extrusion process, and 3D printing in the pharmaceutical industry. How...

(This article belongs to the Section Drug Delivery and Controlled Release)
  • Article
  • Open Access
29 Citations
5,750 Views
15 Pages

Reprintable Paste-Based Materials for Additive Manufacturing in a Circular Economy

  • Marita Sauerwein,
  • Jure Zlopasa,
  • Zjenja Doubrovski,
  • Conny Bakker and
  • Ruud Balkenende

29 September 2020

The circular economy requires high-value material recovery to enable multiple product lifecycles. This implies the need for additive manufacturing to focus on the development and use of low-impact materials that, after product use, can be reconstitut...

(This article belongs to the Section Sustainable Engineering and Science)
  • Article
  • Open Access
5 Citations
2,479 Views
12 Pages

UV-Assisted Material Extrusion Additive Manufacturing of Double-Base Propellant

  • Manman Li,
  • Yuchen Gao,
  • Qionglin Wang,
  • Weitao Yang and ,
  • Guo-Lin Gao and
  • Zaixing Jiang
  • + 1 author+ 0 author

19 March 2025

Double-base (DB) propellants, renowned for their superior performance and cost-effectiveness, are extensively utilized in both rocketry and artillery applications. During the 3D printing process of double-base propellants, auxiliary solvents play a c...

(This article belongs to the Section Polymer Processing and Engineering)

of 3