C2+ hydrocarbons, especially C2+ olefins, as important basic chemical raw materials, mainly come from petroleum cracking. With the increasing scarcity of petroleum resources, the search for new olefins production routes has become the focus of resear...
Oxidative coupling of alcohols using methanol and ethanol, which can both be made renewable, is an attractive route to produce acrolein (propenaldehyde) in a single-step process. Currently acrolein is produced by direct oxidation of fossil propylene,...
Trametes villosa Laccase (TVL) was immobilized through physical adsorption on SBA-15 mesoporous silica and the immobilized TVL was used in the oxidative coupling of trans-resveratrol. Higher loading and activity of the immobilized enzyme on SBA-15 we...
An iron-catalyzed asymmetric oxidative homo-coupling of 2-naphthols for the synthesis of 1,1′-Bi-2-naphthol (BINOL) derivatives is reported. The coupling reaction provides enantioenriched BINOLs in good yields (up to 99%) and moderate enantiose...
The catalytic activation of CH4 by limited amounts of O2 produces a mixture of synthesis gas (CO, H2) and light hydrocarbons (C2Hx), the relative amounts of each depending on catalyst type and process conditions. Using an elementary reaction mechanis...
Utilizing iron chloride as a Lewis acid catalyst, we developed a straightforward and mild oxidative cross-coupling reaction between quinoxalinones and indoles, yielding a series of versatile 3-(indol-3-yl)quinoxalin-2-one derivatives. This approach a...
The oxidative coupling of methane (OCM) to C2 hydrocarbons (C2H4 and C2H6) has aroused worldwide interest over the past decade due to the rise of vast new shale gas resources. However, obtaining higher C2 selectivity can be very challenging in a typi...
Extensive data on the characteristics and performance of the catalysts synthesized and tested for methane oxidative coupling (OCM) is available in thousands of reports published during the last four decades. Revisiting and analyzing the general trend...
The photocatalytic oxidative coupling of methane (OCM) on metal-loaded one-dimensional TiO2 nanowires (TiO2 NWs) was performed. With metal loading, the electric and optical properties of TiO2 NWs were adjusted, contributing to the improvement of the...
Direct upgrading of methane into value-added products is one of the most significant technologies for the effective transformation of hydrocarbon feedstocks in the chemical industry. Both oxidative and non-oxidative methane conversion are broadly use...
The aim of this study was to investigate the antioxidant properties in vitro of three different vanillic dimmers (Compounds 1a–c). They were synthesized through an oxidative coupling strategy in good yields. The targeted compounds were found to...
Copper ferrites dopped with molybdenum were studied in an oxidative coupling reaction between methanol and ethanol in the gas phase. The catalysts have been characterized by X-ray diffraction, where the presence of ferrite, magnetite, and tenorite ph...
The oxidative coupling of methane (OCM) is a promising process for converting methane directly into more valuable ethane and ethylene. In this work, high time resolution online mass spectrometry was employed to track the OCM reaction over a commercia...
This paper presents a comprehensive computational fluid dynamics (CFD) model for describing the oxidative coupling of methane (OCM) carried out in fixed-bed reactors for olefin production. Initially, a single pellet model was developed and implemente...
At high temperatures, the oxidative coupling of methane (OCM) is an attractive approach for catalytic conversion of methane into value-added chemicals. Experiments with a Pt/Al2O3-coated catalytic honeycomb monolith were conducted with varying CH4/O2...
Methane is the fundamental raw material of the C1 chemical industry, with abundant reserves. Its direct conversion into high-value-added chemicals has great scientific significance and broad commercial potential for the efficient use of methane resou...
The oxidative coupling of methane (OCM) on MgO is often computationally explored via Mars-Krevelen (MvK) mechanism. However, the difficult desorption of CH3 radical at stepped MgO surface shadow the feasibility of mechanism. In this work, density fun...
Lignans are mainly dimers of 4-hydroxycinnamic acids (HCAs) and reduced analogs thereof which are produced in Nature through phenol oxidative coupling (POC) as the primary C-C or C-O bond-forming reaction under the action of the enzymes peroxidases a...
The oxidative coupling of methane (OCM) is operated at high temperatures and is a highly exothermic reaction; thus, hotspots form on the catalyst surface during reaction unless the produced heat is removed. It is crucial to control the heat formed be...
In this study, we aimed to enhance the catalytic activity of perovskite catalysts and elucidate their catalytic behavior in the oxidative coupling of methane (OCM), using alkali-added LaAlO3 perovskite catalysts. We prepared LaAlO3_XY (X = Li, Na, K,...
In this work, Ho2O3 nanosheets were synthesized by a hydrothermal method. A series of Sr-modified Ho2O3 nanosheets (Sr-Ho2O3-NS) with a Sr/Ho molar ratio between 0.02 and 0.06 were prepared via an impregnation method. These catalysts were characteriz...
Novel reactor configurations for the oxidative coupling of methane (OCM), and in particular membrane reactors, contribute toward reaching the yield required to make the process competitive at the industrial scale. Therefore, in this work, the convent...
In this study, three different reactor concepts for the oxidative coupling of methane (OCM) reaction are examined at the miniplant scale. Their performance and response to variations in key process parameters, such as temperature and gas hourly space...
Autothermal oxidative coupling of methane (OCM) is a highly attractive approach for methane utilization. If platinum-based catalysts are operated in short-contact-time reactors with high space velocities, high methane conversion can be achieved. Usin...
Brazil’s large biofuels industry generates significant amounts of effluents, e.g., vinasse from bioethanol, that can effectively be used as substrate for production of biogas via Anaerobic Digestion (AD). The Oxidative Coupling of Methane (OCM) is th...
Alkaptonuria (AKU) is a rare metabolic disorder caused by homogentisate 1,2-dioxygenase (HGD) deficiency, leading to homogentisic acid (HGA) accumulation and ochronotic pigment deposition, which drug therapy cannot reverse. The process of pigment for...
Chemical–structural characteristics of three differently synthesized research-benchmark Mn-Na-W-Ox/SiO2 catalysts for the Oxidative Coupling of Methane (OCM) were systematically studied in this research. XRD, EDX, ICP-OES, and SEM/FIB-SEM techn...
This work presents multi-scale approaches to investigate 3D printed structured Mn–Na–W/SiO2 catalysts used for the oxidative coupling of methane (OCM) reaction. The performance of the 3D printed catalysts has been compared to their conventional analo...
A plasma–catalyst hybrid system has been developed for the direct conversion of methane to C2+ hydrocarbons in dielectric barrier discharge (DBD) plasma. TiO2 presented the highest C2+ yield of 11.63% among different dielectric materials when i...
Performance analysis of the adsorptive separation of ethylene downstream of an oxidative coupling of methane (OCM) process, being an alternative process for converting methane content of natural gas or other methane-rich sources to ethylene, was stud...
The combination of electronic and catalytic features, in conjunction with empirical investigation, provides enriched perspectives on the analysis of catalysts, thus propelling progress and design. This study employs computational methods to deduce el...
This study focuses on optimizing C2 yields in the oxidative coupling of methane (OCM), a pivotal process for sustainable chemical production. By harnessing advanced machine learning (ML) techniques, this research aimed to predict C2 yields and identi...
We report a step-economic strategy for the direct synthesis of novel polycyclic N-heterocycle-fused naphthoquinones by merging intramolecular oxidative coupling and cascade [4 + 2] cycloaddition. In the protocol, mechanistic investigations suggest th...
Hypertension, a multifactorial chronic inflammatory condition, is an important risk factor for neurovascular and neurodegenerative diseases, including stroke and Alzheimer’s disease. These diseases have been associated with higher concentration...
Methane oxidative coupling (OCM) is considered a potential direct route to produce C2 hydrocarbons. Layered perovskite-like Sr2TiO4 is a promising OCM catalyst. Mechanochemical activation (MA) is known to be an environmentally friendly method for per...
The direct aerobic coupling reaction of arenes with olefins was successfully achieved by the use of Pd(OAc)2/molybdovanadophosphoric acid (HPMoV) as a key catalyst under 1 atm of dioxygen. This catalytic system could be extended to the coupling react...
Porous transition metal oxides are widely studied as biocompatible materials for the development of prosthetic implants. Resurfacing the oxide to improve the antibacterial properties of the material is still an open issue, as infections remain a majo...
The accumulation of residual elements such as Cu and Sn in recycled steels has become an increasingly critical issue, as their enrichment during high-temperature oxidation can lead to surface hot shortness and deterioration of surface quality. In thi...
Developing self-healing silicone elastomers are highly significant because of their promising applications. Herein, we present novel self-healing disulfide-linked silicone elastomers (SEs) based on thiol-terminated sulfur-containing heterochain polys...
Research on the coupling of membrane separation (MS) and electrochemical advanced oxidation processes (EAOPs) has been a hot area in water pollution control for decades. This coupling aims to greatly improve water quality and focuses on the challenge...
The industrial application of laser materials processing methods is still far ahead of research into the physical phenomena occurring during these processes. In particular, the effect of high temperatures on the energy coupling of laser irradiation o...
Metal oxide varistors are applied today inside modern surge arresters for overvoltage protection for all voltage levels. Their main issue is the thermal activation of their crossing current, which could lead to complete destruction by thermal runaway...
The availability of water-soluble nanoparticles allows catalytic reactions to occur in highly desirable green environments. The catalytic activity and selectivity of water-soluble palladium nanoparticles capped with 6-(carboxylate)hexanethiolate (C6-...
Oxidative coupling of methane (OCM) is a process to directly convert methane into ethylene. However, its ethylene yield is limited in conventional reactors by the nature of the reaction system. In this work, the integration of different membranes to...
The direct conversion of biomass-derived ethanol to high-valued-added chemicals has attracted widespread attention recently due to the great economic and environmental advantages. In the present study, the conversion of bioethanol through the Guerbet...
Palladacycles are highly efficient precatalysts in cross-coupling reactions whose immobilization on carbonaceous materials has been hardly studied. Herein, we report a detailed study on the synthesis and characterization of new oxime palladacycle-gra...
A simple method for the synthesis of formate esters and formamides is presented based on the Au/TiO2-catalyzed aerobic oxidative coupling between alcohols or amines and formaldehyde. The suitable form of formaldehyde is paraformaldehyde, as cyclic tr...
A series of chelated dehydroacetic acid–imine-based ligands L1H~L4H was synthesized by reacting dehydroacetic acid with 2-t-butylaniline, (S)-1-phenyl-ethylamine, 4-methoxylbenzylamine, and 2-(aminoethyl)pyridine, respectively, in moderate yiel...
Dess–Martin periodinane (DMP) is a broadly applicable oxidant in chemical synthesis. In this work, an efficient and convenient synthesis of N-substituted isoquinolinone derivatives mediated by DMP was achieved through the oxidative coupling rea...
Brønsted acid-catalyzed reactions of α-pinene have been studied because of their ability to produce various types of fragrance molecules. Beyond this application, dimeric hydrocarbon products produced from coupling reactions of α-p...
of 98