Skip to Content

878 Results Found

  • Article
  • Open Access
14 Citations
5,772 Views

7 August 2018

This paper addresses the issues related to the rapid production of hydrogen from methane steam reforming by means of process intensification. Methane steam reforming coupled with catalytic combustion in thermally integrated microchannel reactors for...

(This article belongs to the Section L: Energy Sources)
  • Article
  • Open Access
7 Citations
709 Views
19 Pages

Management and Optimization of Bio-Resource Decentralized Energy Generation Under Political Instability

  • Valerii Fedoreiko,
  • Oleg Kravchenko,
  • Dariusz Sala,
  • Roman Zahorodnii and ,
  • Michał Pyzalski and
  • Roman Dychkovskyi
  • + 1 author+ 0 author

30 January 2026

This study addresses the management and optimization of decentralized bioresource energy generation under conditions of political instability, using Ukraine as a representative case. The research aims to enhance energy security and operational resili...

(This article belongs to the Special Issue Biomass Power Generation and Gasification Technology)
  • Article
  • Open Access
8 Citations
3,931 Views
23 Pages

Decarbonizing maritime transport hinges on transitioning oil-fueled ships (98.4% of the fleet) to renewable and low-carbon fuel types. This shift is crucial for meeting the greenhouse gas (GHG) reduction targets set by the IMO and the EU, with the ai...

(This article belongs to the Special Issue Advanced Technologies of Ship Power Plants and Infrastructure of Seaports)
  • Article
  • Open Access
16 Citations
2,898 Views
19 Pages

4 March 2024

In response to increasingly stringent emissions regulations and the depletion of conventional fuel sources, integrating carbon-free fuels into the transport sector has become imperative. While hydrogen (H2) presents significant technical challenges,...

(This article belongs to the Special Issue Internal Combustion Engine: Research and Application—2nd Edition)
  • Feature Paper
  • Article
  • Open Access
44 Citations
17,767 Views
17 Pages

Green LD (BOF) Steelmaking—Reduced CO2 Emissions via Increased Scrap Rate

  • Bernhard Voraberger,
  • Gerald Wimmer,
  • Uxia Dieguez Salgado,
  • Erich Wimmer and ,
  • Krzysztof Pastucha and
  • Alexander Fleischanderl
  • + 1 author+ 0 author

10 March 2022

The basic oxygen furnace (BOF) is the dominating primary steelmaking process. It is an autothermal process where hot metal and scrap are used as charging materials. The decarbonization and transformation of integrated BOF steelmaking will be the most...

(This article belongs to the Special Issue Oxygen Steelmaking Process)
  • Article
  • Open Access
4 Citations
1,354 Views
23 Pages

30 January 2026

Growing renewable penetration increases deep peak-shaving demands, making stable wide-load operation of coal-fired boilers essential. A full-process CFD model of a 660 MW ultra-supercritical boiler was established, covering the furnace, heat-transfer...

(This article belongs to the Special Issue Advances in Combustion Processes: Fundamentals and Applications)
  • Article
  • Open Access
1,071 Views
33 Pages

19 October 2025

As urbanization accelerates, solid waste volume increases, making municipal solid waste incineration (MSWI) a primary disposal method. However, low combustion efficiency and harmful gas emissions, such as nitrogen oxides (NOX), contribute to signific...

(This article belongs to the Special Issue Advances in Detection, Control and Optimization of Low-Carbon Energy Systems)
  • Article
  • Open Access
7 Citations
3,680 Views
23 Pages

17 January 2025

This paper presents a numerical simulation and structural optimization study of the combustion process within the grate and boiler furnace of a 750 t/d waste incineration. The study focuses on adjusting the secondary air velocity, secondary air incli...

(This article belongs to the Section B: Energy and Environment)
  • Article
  • Open Access
2 Citations
1,805 Views
40 Pages

Post-combustion amine scrubbing using monoethanolamine (MEA) remains a leading carbon capture technology, yet its deployment is constrained by high regeneration energy requirements and the computational expense of rigorous process simulation. This st...

(This article belongs to the Section Learning)
  • Article
  • Open Access
13 Citations
9,208 Views
20 Pages

12 June 2019

Solvent-based post-combustion carbon capture (PCC) is a mature and essential technology to solve the global warming problem. The high energy consuming issue and the flexible operation required by the power plants inquire about the development of effe...

(This article belongs to the Special Issue Dynamic Modeling and Control in Chemical and Energy Processes)
  • Article
  • Open Access
11 Citations
2,594 Views
14 Pages

Synthesis and Processing Parameter Optimization of Nano-Belite via One-Step Combustion Method

  • Hongfang Sun,
  • Weixing Lian,
  • Xiaogang Zhang,
  • Wei Liu and ,
  • Feng Xing and
  • Jie Ren
  • + 1 author+ 0 author

14 July 2022

This paper proposes a new chemical combustion method for the synthesis of nano-low-carbon belite cement via a simple one-step process without using any oxidizers, and related mechanisms are briefly introduced. The starting materials used, including m...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
1 Citations
1,632 Views
16 Pages

8 November 2024

Chemical looping combustion (CLC) emerges as a cost-effective CO2 capture technology, demonstrating high competitiveness for both industrial and energy applications. This study explores the synthesis of a Cu-based, praseodymium (Pr)-modified gamma-al...

(This article belongs to the Section Environmental Catalysis)
  • Article
  • Open Access
15 Citations
3,489 Views
27 Pages

14 July 2022

This study uses an optimization approach for developing a combustion system in a compression–ignition engine that is able to operate under oxy-fuel conditions, and produces mainly CO2 and H2O as exhaust gases. This is achieved because the combu...

(This article belongs to the Section Mechanical Engineering)
  • Proceeding Paper
  • Open Access
600 Views
11 Pages

Emissions and Dynamics: The Role of Software in Similar Automotive Platforms

  • Hristo Konakchiev,
  • Iliyan Damyanov and
  • Rosen Miletiev

The development of internal combustion engines aims to maximize the combustion process energy, achieve the highest possible efficiency, and reduce harmful emissions released into the environment, while also improving power output. In this regard, her...

(This article belongs to the Proceedings of The 15th International Scientific Conference TechSys 2026—Engineering, Technologies and Systems)
  • Article
  • Open Access
5 Citations
2,280 Views
13 Pages

31 August 2022

In order to optimize the combustion chamber of a highly intensified single-cylinder diesel engine, including improvement of the air utilization rate in the combustion chamber, optimization of the fuel/air mixture process, reduction of the soot emissi...

  • Article
  • Open Access
6 Citations
3,067 Views
11 Pages

20 June 2019

This article studies the combustion of refined sunflower, virgin sunflower and virgin rapeseed oils in a low-pressure auxiliary air fluid pulverization burner in order to establish the optimal operating conditions. The influence of varying the type o...

(This article belongs to the Section A4: Bio-Energy)
  • Article
  • Open Access
6 Citations
2,680 Views
19 Pages

12 December 2022

Presently, the utilization of biomass as an energy source has gained significant attention globally due to its capacity to provide constant feedstock. In 2020, biomass combustion generated 19 Mt of CO2, representing an increase of 16% from the previo...

(This article belongs to the Collection Municipal Solid Waste Management and Environmental Sustainability)
  • Proceeding Paper
  • Open Access
1 Citations
2,058 Views
5 Pages

Optimization of the Steel Strip Heating Process by Changing the Excess Combustion Air

  • Šimon Staško,
  • Gustáv Jablonský,
  • Augustín Varga and
  • Róbert Dzurňák

21 February 2024

Reducing energy consumption and increasing energy efficiency have been especially topical issues recently, affecting all areas of energy consumption, including industrial sectors. Continuous annealing lines, as important industrial production facilit...

(This article belongs to the Proceedings of International Scientific Conference Modern Metallurgy—Iron and Steelmaking 2023)
  • Article
  • Open Access
29 Citations
5,961 Views
24 Pages

17 March 2019

Increasing the combustion efficiency of power plant boilers and reducing pollutant emissions are important for energy conservation and environmental protection. The power plant boiler combustion process is a complex multi-input/multi-output system, w...

  • Article
  • Open Access
12 Citations
4,424 Views
23 Pages

Optimization of Circulating Fluidized Bed Boiler Combustion Key Control Parameters Based on Machine Learning

  • Lei Han,
  • Lingmei Wang,
  • Hairui Yang,
  • Chengzhen Jia and ,
  • Enlong Meng,
  • Yushan Liu and
  • Shaoping Yin
  • + 2 authors+ 0 author

28 July 2023

During the coal-fired circulating fluidized bed unit participation in the peak regulation process of the power grid, the thermal automatic control system assists the operator to adjust the mode focusing on pollutant control and ignoring the economy s...

(This article belongs to the Topic Artificial Intelligence and Computational Methods: Modeling, Simulations and Optimization of Complex Systems)
  • Article
  • Open Access
60 Citations
7,404 Views
15 Pages

12 January 2021

Nowadays, despite a negative impact on the natural environment, coal combustion is still a significant energy source. One way to minimize the adverse side effects is sophisticated combustion technologies, such as, e.g., staged combustion, co-combusti...

(This article belongs to the Section Intelligent Sensors)
  • Article
  • Open Access
1 Citations
685 Views
22 Pages

Numerical Study on the Combustion Process of the First Cycle of Diesel Engine Start-Up Based on Target Torque Control

  • Yingshu Liu,
  • Degang Li,
  • Miao Yang,
  • Hao Zhang and ,
  • Liang Guo,
  • Dawei Qu,
  • Yun Zhang and
  • Xuedong Lin
  • + 3 authors+ 0 author

23 January 2026

During the diesel engine start-up phase, low rotational speed and coolant temperature result in poor fuel atomization and prolonged ignition delay. This impedes the in-cylinder combustion process and directly impacts the engine’s emission perfo...

(This article belongs to the Section I2: Energy and Combustion Science)
  • Article
  • Open Access
10 Citations
3,781 Views
14 Pages

17 July 2021

This paper studies the combustion performance of diesel in constant volume combustion vessels under different conditions of mixed low-nitrogen (O2 and N2) or non-nitrogen (O2 and CO2) in varying proportions. The high-speed camera is used to shoot the...

(This article belongs to the Section Air Quality)
  • Article
  • Open Access
6 Citations
1,835 Views
23 Pages

23 February 2024

Herein, a diesel engine jet disturbance combustion system was proposed to achieve efficient and clean combustion under heavy load conditions in heavy-duty diesel engines. The key components of the combustion system were designed, and a research platf...

(This article belongs to the Section I2: Energy and Combustion Science)
  • Article
  • Open Access
8 Citations
2,936 Views
13 Pages

Model Based Control Method for Diesel Engine Combustion

  • Hu Wang,
  • Xin Zhong,
  • Tianyu Ma,
  • Zunqing Zheng and
  • Mingfa Yao

19 November 2020

With the increase of information processing speed, more and more engine optimization work can be processed automatically. The quick-response closed-loop control method is becoming an urgent demand for the combustion control of modern internal combust...

(This article belongs to the Section A1: Smart Grids and Microgrids)
  • Article
  • Open Access
14 Citations
8,927 Views
15 Pages

Biomass Combustion Control in Small and Medium-Scale Boilers Based on Low Cost Sensing the Trend of Carbon Monoxide Emissions

  • Jana Mižáková,
  • Ján Piteľ,
  • Alexander Hošovský,
  • Ivan Pavlenko and ,
  • Marek Ochowiak and
  • Serhii Khovanskyi
  • + 1 author+ 0 author

13 November 2021

The article deals with the possibility of efficient control of small and medium-scale biomass-fired boilers by implementing low-cost sensors to sense the trend of carbon monoxide emissions into control of the biomass combustion process. Based on the...

(This article belongs to the Special Issue Modelling, Simulation and Control in Combustion Processes of Renewable Fuels)
  • Article
  • Open Access
4 Citations
1,723 Views
16 Pages

Study on the Combustion Behavior and Kinetic Characteristics of Semi-Coke from Oil Shale

  • Fajun Zhao,
  • Lei Zhang,
  • Sen Liu,
  • Tianyu Wang and ,
  • Peiyong Xue,
  • Mingxuan Wu and
  • Jiankang Yun
  • + 2 authors+ 0 author

22 May 2025

This study systematically investigates the combustion behavior and kinetic characteristics of oil shale semi-coke. Thermogravimetric analysis (TGA) experiments, combined with both model-free and model-based methods, were used to explore the thermal c...

(This article belongs to the Section Applied Thermal Engineering)
  • Article
  • Open Access
81 Citations
12,755 Views
25 Pages

Particulate Matter Emission and Air Pollution Reduction by Applying Variable Systems in Tribologically Optimized Diesel Engines for Vehicles in Road Traffic

  • Saša Milojević,
  • Jasna Glišović,
  • Slobodan Savić,
  • Goran Bošković and ,
  • Milan Bukvić and
  • Blaža Stojanović
  • + 1 author+ 0 author

31 January 2024

Regardless of the increasingly intensive application of vehicles with electric drives, internal combustion engines are still dominant as power units of mobile systems in various sectors of the economy. In order to reduce the emission of exhaust gases...

(This article belongs to the Section Air Quality)
  • Article
  • Open Access
6 Citations
2,396 Views
21 Pages

Investigation of Optimization of Combustion Processes in the Engine of Combat Vehicles by Use of Disk Structure

  • Igor Korobiichuk,
  • Viktorij Mel’nick,
  • Volodimir Karachun and
  • Vladyslav Shybetskyi

27 October 2021

This work analyzes the possibility of a provision of force-majeure mode of the combat vehicles with the aid of disk construction installed in the baffler, the base of the operation of which is the method of residual cyclical quadratic chain code of c...

(This article belongs to the Topic Numerical Methods and Computer Simulations in Energy Analysis)
  • Article
  • Open Access
1 Citations
1,604 Views
19 Pages

Immunological AI Optimizer Deployment in a 330 MW Lignite-Fired Unit for NOx Abatement

  • Konrad Świrski,
  • Łukasz Śladewski,
  • Konrad Wojdan and
  • Xianyong Peng

7 June 2025

This study presents an advanced NOx reduction strategy for a 330 MW lignite-fired boiler using an immunological AI system: the SILO (Stochastic Immune Layer Optimizer) combustion optimizer inspired by artificial immune systems. The immunological AI o...

(This article belongs to the Special Issue Advanced Clean Coal Technology)
  • Article
  • Open Access
2 Citations
3,070 Views
17 Pages

Experimental Demonstration of Deterministic Chaos in a Waste Oil Biodiesel Semi-Industrial Furnace Combustion System

  • Shengyang Gao,
  • Fashe Li,
  • Qingtai Xiao,
  • Jianxin Xu and ,
  • Huage Wang and
  • Hua Wang
  • + 1 author+ 0 author

25 November 2019

In this paper, the nonlinear dynamic characteristics of the oxygen-enriched combustion of waste oil biodiesel in semi-industrial furnaces were tested by the power spectrum, phase space reconstruction, the largest Lyapunov exponents, and the 0-1 test...

  • Article
  • Open Access
38 Citations
5,446 Views
15 Pages

Selected Aspects of Combustion Optimization of Coal in Power Plants

  • Maciej Dzikuć,
  • Piotr Kuryło,
  • Rafał Dudziak,
  • Szymon Szufa and ,
  • Maria Dzikuć and
  • Karolina Godzisz
  • + 1 author+ 0 author

2 May 2020

Growing ecological standards force the implementation of solutions that will contribute to reducing greenhouse gas (GHG) emissions to the atmosphere. This is particularly important in Poland, whose energy system is almost 80% based on coal. In the in...

(This article belongs to the Section B: Energy and Environment)
  • Article
  • Open Access
2 Citations
2,453 Views
17 Pages

9 June 2021

Combustion processes continue to be essential for the energy supply sector. A reliable energetic evaluation of these processes is crucial, particularly since the pollutants resulting from combustion have a significant impact on global warming. This w...

  • Article
  • Open Access
11 Citations
2,605 Views
17 Pages

6 October 2024

This study employs a numerical computation model based on a municipal solid waste (MSW) incinerator in Nanning to investigate the impact of different sewage sludge (SS) co-combustion ratios and MSW incinerator temperatures on combustion efficiency. U...

(This article belongs to the Section Environmental and Green Processes)
  • Article
  • Open Access
6 Citations
2,816 Views
18 Pages

5 February 2020

The paper deals with the analysis of the combustion of volatiles evolved during thermolysis (thermal treatment) of biomass feedstock. The process is tailored to produce charcoal (biochar), heat and electricity and the whole system consists of a carbo...

(This article belongs to the Special Issue Selected Papers from the International Conference on Innovative Applied Energy (IAPE’19))
  • Article
  • Open Access
4 Citations
2,302 Views
17 Pages

12 May 2025

As the core process of the thermal treatment of municipal solid waste (MSW), incineration process optimization has become a frontier topic in the field of environmental engineering. This study took a 500 t/d incinerator for engineering application as...

(This article belongs to the Section Chemical Processes and Systems)
  • Article
  • Open Access
2 Citations
2,430 Views
11 Pages

Numerical Study and Model Validation of Low-Pressure Hydrogen–Air Combustion in a Closed Vessel

  • Oleh Tryfonov,
  • Andrzej Teodorczyk,
  • Olga Shypul,
  • Wojciech Rudy and ,
  • Vadym Garin,
  • Vitalii Myntiuk and
  • Denys Tkachenko
  • + 2 authors+ 0 author

This study investigates the combustion behavior of hydrogen–air mixtures in a closed chamber at reduced initial pressure, focusing on applications in thermal energy methods (TEMs) for plastic processing. The primary goal was to develop and vali...

(This article belongs to the Special Issue Integrated Computer Technologies in Mechanical Engineering—Synergetic Engineering III)
  • Article
  • Open Access
1 Citations
2,791 Views
13 Pages

Analysis of the Correlation between Combustion Products in Biomass Thermal Power Plant Using Association Rule Mining

  • Saša Igić,
  • Dragana Bošković,
  • Barbara Vujkov,
  • Nemanja Igić and ,
  • Todor Janić,
  • Dalibor Jeličić,
  • Vladica Ristić and
  • Boris Dumnić
  • + 3 authors+ 0 author

22 October 2020

The biomass combustion process is inevitably accompanied by the emission of pollutant gasses. This paper gives a comprehensive analysis of the external variables and combustion products of the biomass plant. The analyzed data were collected from 18 M...

(This article belongs to the Special Issue Thermal Analysis of Biomass Energy Production Process)
  • Article
  • Open Access
2 Citations
1,095 Views
25 Pages

Data-Driven Co-Optimization of Multiple Structural Parameters for the Combustion Chamber in a Coke Oven with a Multi-Stage Air Supply System

  • Yuan Shan,
  • Chen Yang,
  • Xinyu Ning,
  • Mingdeng Wang and ,
  • Yaopeng Li,
  • Ming Jia and
  • Hong Liu
  • + 2 authors+ 0 author

26 November 2025

Driven by the urgent reduction in industrial energy consumption and nitrogen oxide (NOx) emissions, numerical simulation becomes a significant tool to understand the internal working process and optimize the structure of the combustion chamber in cok...

(This article belongs to the Section Energy Systems)
  • Article
  • Open Access
5 Citations
5,539 Views
19 Pages

Experimental Research to Increase the Combustion Efficiency in the Top-Lit Updraft Principle Based Gasifier

  • Ioan Pavel,
  • Radu Iulian Rădoi,
  • Gabriela Matache,
  • Ana-Maria Carla Popescu and
  • Kati Pavel

15 February 2023

The recovery of vegetal waste for energy purposes is one of the ways to increase the amount of energy obtained from renewable sources. The Top-Lit Updraft (TLUD) gasification and combustion process is recognized as the least polluting of all other co...

(This article belongs to the Topic Sustainable Thermal Energy Technologies and Processes)
  • Article
  • Open Access
5 Citations
1,480 Views
23 Pages

Analysis of Combustion Behavior and Comparison of Kinetic Models of Oil Shale

  • Fajun Zhao,
  • Hong Zhang,
  • Yangming Liu,
  • Lei Zhang and ,
  • Sen Liu,
  • Tianyu Wang and
  • Meng Li
  • + 2 authors+ 0 author

18 April 2025

This study examines the thermal characteristics and kinetics of oil shale combustion using thermogravimetric analysis (TGA) at various heating rates. The combustion process includes three stages: dehydration, main combustion (70–80% mass loss),...

  • Article
  • Open Access
464 Views
15 Pages

Solid Rocket Propellants Based on Mechanochemically Activated Aluminum: The Role of Graphite in Combustion Enhancement

  • Aida Artykbayeva,
  • Ainur Khairullina,
  • Alua Maten,
  • Ayagoz Bakkara and ,
  • Bakhtiyar Sadykov,
  • Sholpan Gabdrashova,
  • Xuwen Liu and
  • Ruiqi Shen
  • + 3 authors+ 0 author

2 September 2026

This work is devoted to the study of the influence of mechanical activation of aluminum, as well as its modification with graphite on the combustion processes of solid rocket propellant (SRP). Experiments were conducted to determine the ignition indu...

(This article belongs to the Section Aerospace Science and Engineering)
  • Article
  • Open Access
3 Citations
2,854 Views
21 Pages

Model-in-the-Loop Simulation for Model Predictive Controlled High-Pressure Direct Injection Dual-Fuel Engine Combustion Control

  • Xiuyun Shuai,
  • Hongyu Liu,
  • He Li,
  • Wei Cui and ,
  • Qingxin Wang,
  • Wenbin Yu and
  • Feiyang Zhao
  • + 2 authors+ 0 author

18 February 2025

Given the intricate combustion process and the multitude of control parameters inherent to the high-pressure direct injection (HPDI) diesel/natural gas dual-fuel engine, achieving precise combustion control represents a significant challenge. It is i...

(This article belongs to the Topic Digital Manufacturing Technology)
  • Article
  • Open Access
3 Citations
1,977 Views
29 Pages

Software Package for Optimization of Burner Devices on Dispersed Working Fluids

  • Ruslan V. Fedorov,
  • Igor I. Shepelev,
  • Mariia A. Malyoshina,
  • Dmitry A. Generalov and ,
  • Vyacheslav V. Sherkunov and
  • Valeriy V. Sapunov
  • + 1 author+ 0 author

9 February 2025

Taking into account the approaches to ecology and social policy, the development of technologies for optimizing the combustion process for thermal power plants, one of the key sources of greenhouse gas emissions, is relevant. This article analyzes ap...

(This article belongs to the Section I2: Energy and Combustion Science)
  • Article
  • Open Access
19 Citations
2,878 Views
21 Pages

20 June 2020

A modified closed binary Brayton cycle model with variable isothermal pressure drop ratios is established by using finite time thermodynamics in this paper. A topping cycle, a bottoming cycle, two isothermal heating processes and variable-temperature...

  • Article
  • Open Access
17 Citations
4,133 Views
22 Pages

The Engine Combustion Phasing Prediction Based on the Support Vector Regression Method

  • Qifan Wang,
  • Ruomiao Yang,
  • Xiaoxia Sun,
  • Zhentao Liu and ,
  • Yu Zhang,
  • Jiahong Fu and
  • Ruijie Li
  • + 2 authors+ 0 author

8 April 2022

While traditional one-dimensional and three-dimensional numerical simulation techniques require a lot of tests and time, emerging Machine Learning (ML) methods can use fewer data to obtain more information to assist in engine development. Combustion...

(This article belongs to the Special Issue Internal Combustion Engine Combustion Processes)
  • Article
  • Open Access
3 Citations
1,197 Views
19 Pages

19 September 2025

Hydrogen injection timing (HIT) plays a crucial role in the combustion and emission characteristics of a hydrogen/n-butanol dual-fuel engine with hydrogen direct injection. This study employed an integrated approach combining three-dimensional simula...

(This article belongs to the Section I2: Energy and Combustion Science)
  • Feature Paper
  • Article
  • Open Access
19 Citations
4,057 Views
24 Pages

Applying the Random Forest Method to Improve Burner Efficiency

  • Vladislav Kovalnogov,
  • Ruslan Fedorov,
  • Vladimir Klyachkin,
  • Dmitry Generalov and ,
  • Yulia Kuvayskova and
  • Sergey Busygin
  • + 1 author+ 0 author

20 June 2022

Fuel power plants are one of the main sources of pollutant emissions, so special attention should be paid to improving the efficiency of the fuel combustion process. The mathematical modeling of processes in the combustion chamber makes it possible t...

(This article belongs to the Special Issue Advanced Numerical Analysis and Scientific Computing)
  • Article
  • Open Access
7 Citations
4,759 Views
22 Pages

Computer Technologies of 3D Modeling by Combustion Processes to Create Effective Methods of Burning Solid Fuel and Reduce Harmful Dust and Gas Emissions into the Atmosphere

  • Aliya Askarova,
  • Saltanat Bolegenova,
  • Valeriy Maximov,
  • Symbat Bolegenova and ,
  • Nariman Askarov and
  • Aizhan Nugymanova
  • + 1 author+ 0 author

24 February 2021

Using numerical methods, studies have been carried out to determine the effect of the introduction of the technology of two-stage combustion of high-ash Karaganda coal on the main characteristics of heat and mass transfer processes in the furnace of...

(This article belongs to the Special Issue Enhancement of Heat Transfer in Power Plants)
  • Review
  • Open Access
6 Citations
2,601 Views
30 Pages

14 April 2026

This article provides a comprehensive review of current state of knowledge regarding the ongoing development of hydrogen-fueled internal combustion engines (H2ICE). It describes the key challenges, the resolution of which will determine further progr...

(This article belongs to the Section A: Sustainable Energy)

of 18