82 Results Found

The multi-walled carbon nanotubes obtained by catalytic chemical vapour deposition synthesis are used as a solid matrix for the adsorption of the Reactive Blue 116 dye and the Reactive Yellow 81 dye from aqueous solutions at different pH values. The...

The sorption process is most commonly described by Langmuir isotherms, which can be calculated from either a non-linear form or various linear forms. Despite the fact that the non-linear model is now preferred, articles using linear models continue t...

Adsorption is considered to be one of the most effective technologies widely used in global environmental protection areas. Modeling of experimental adsorption isotherm data is an essential way for predicting the mechanisms of adsorption, which will...

Groundwater arsenic (As) pollution is a naturally occurring phenomenon posing serious threats to human health. To mitigate this issue, we synthesized a novel bentonite-based engineered nano zero-valent iron (nZVI-Bento) material to remove As from con...

This study aims to purify water from hazardous dyes and for this purpose, a novel adsorbent is developed that was synthesized by using sodium alginate, guar gum and iron coated activated alumina (SA@GG@ICAA Composites) with the Ion Gelation Method. T...

Mediterranean countries produce up to 97% of the total global olive production. Besides being a serious environmental burden, olive mill waste represents a potential resource of useful materials for recovery and valorization. In this work, the adsorp...

High concentrations of graphene oxide (GO), a nanoparticle substance with rapid manufacturing development, have the ability to penetrate the soil surface down to the mineral-rich subsurface layers. The destiny and distribution of such an unusual sort...

This study aimed at the adsorption of 18β-glycyrrhetinic acid (18β-GA), a pentacyclic triterpenoid derivative of oleanane type, onto functionalized mesoporous SBA-15 silica and non-porous silica (Aerosil®) as the reference adsorbent. Al...

In this study, we evaluated the performance of low Global Warming Potential (GWP) refrigerant R1234yf on the activated carbon (MSC-30) for adsorption heating applications. The adsorption isotherms of MSC-30/R1234yf were measured using a constant-volu...

In the present research, zeolite is used for the removal of toxic Congo red dye from water solution. The effects of different operating conditions such as hydrogen potential (pH), contact time (time), zeolite dose (D), initial dye concentration (C0),...

A new model of adsorption isotherms Type IV and V is proposed as a basis for theoretical calculations and modelling of adsorption systems such as adsorption heat storage and heat pumps. As the current models have decent yet limited applicability, in...

The excellent adsorption properties of clay minerals make the optimization of heavy metal removal the subject of numerous research projects. In the present study, ASLAVITAL cosmetic clay (ACC) powder was applied for the removal of Cd2+ from water. Th...

Removal of para-nitrophenol (p-NP) from an aqueous solution was studied under various batch adsorption experiments, using alumina (Al2O3) and its composite hexadecyltrimethylammonium bromide (HDTMA+-Br−) as adsorbents. These were later characte...

Recently, considerable attention has been given to using magnetic nanoparticles (MNPs) for capturing oil from oil-in-water (O/W) emulsions, despite MNPs’ inherent instability and agglomeration. Their stabilization through changing surface chemi...

The removal of arsenate ions from aqueous solutions at near-neutral pH was carried out using chitosan-magnetite (ChM) hydrogel beads in batch systems. Equilibrium isotherms and kinetic studies are reported. Obtained equilibrium and kinetic data were...

The adsorption equilibrium of methyl blue (MB) at different temperatures was optimized using activated graphene (AG) as an adsorbent. The experimental data were compared using five linear and nonlinear adsorption isotherms, namely, Langmuir, Freundli...

Apple polyphenols have been studied for various beneficial bioactivities. Especially interesting are traditional, old varieties of apples for which some initial studies have suggested significant bioactivities, but they are still not completely under...

Platinum is a precious metal with many applications, such as: catalytic converters, laboratory equipment, electrical contacts and electrodes, digital thermometers, dentistry, and jewellery. Due to its broad usage, it is essential to recover it from w...

This study investigated the adsorption of phosphate from aqueous solutions using pomegranate peel (PP) as a bio-adsorbent. For this purpose, PP was activated via saponification using sodium hydroxide (NaOH) followed by cationization using iron chlori...

The use of some hydrogels as adsorbents for pollutants removal from wastewater is limited due to their high swelling properties and the difficulty in recovering them after the adsorption process. To overcome these problems, a new hydrogel nanocomposi...

In this research, a tungsten oxide was prepared via a green (biogenic) synthesis route where sodium tungstate dihydrate and Punica granatum peel extract were used as a precursor and a reducing/capping agent, respectively. The characterization of the...

The concentration profiles and breakthrough curves of the 2 m thick compacted clay liner (CCL) given in the specification were compared, considering three different adsorption isotherms (upper convex, linear, and lower concave). In addition, the effe...

The presence of antimony(III) in water represents a worldwide concern, mainly due to its high toxicity and carcinogenicity potential. It can be separated from water by the use of sustainable biopolymers such as chitosan or its derivatives. The presen...

Triclosan (TCS) has been widely employed as active ingredient in household products and has received attention for its hepatotoxicity, endocrine disruption and disturbance on immune function. Polylactic acid (PLA) has been highlighted as an alternati...

In this research, the mathematical model associated with the hydrothermal dehydration process of Nixtamalized Corn Grains (NCG) with different Steeping Time (ST) values, allows the fitting of experimental data with initial moisture M0 and the equilib...

The modification of inorganic surfaces with weak cationic polyelectrolytes by direct deposition through precipitation is a fast approach to generating composites with high numbers of functional groups. The core/shell composites present very good sorp...

Anaerobic digestion of biomass has increasing implementation for bioenergy production. The solid by-product of this technology, i.e., the digestate, has relevant potential in agricultural and environmental applications. This study explored the capaci...

Eucalyptus camdulensis biochar (Ec-bio) was used to adsorb crystal violet (CV) and methylene blue (MB) dyes, which was optimized and further evaluated using different isotherm and kinetic models. Microscopy and spectroscopy techniques showed the inte...

Arsenic occurrence and toxicity records in various industrial effluents have prompted researchers to find cost-effective, quick, and efficient methods for removing arsenic from the environment. Adsorption of As(V) onto dried bacterial biomass is prop...

A major ocean response to tropical cyclone (TC) wind is the mixing of warm sea-surface water with cool subsurface water, which decreases the sea-surface temperature (SST). The decreased SST (δT) under the TC (rather than the cooled water in the...

Intensive development of many industries, including textile, paper, plastic or food, generate huge amounts of wastewaters containing not only toxic dyes but also harmful auxiliaries such as salts, acid, bases, surfactants, oxidants, heavy metal ions....

The isothermal (IT) and non-isothermal (NIT) crystallization kinetics, morphology, and structure of poly(ethylene chlorotrifluoroethylene) (ECTFE) were investigated via differential scanning calorimetry (DSC), polarized optical microscopy (POM), and...

A coarse-grained model of linear polyfunctional weak charged biopolymers was implemented, formed of different proportions of acid-base groups resembling the composition of humic substances. These substances are mainly present in dissolved organic mat...

Moisture adsorption and desorption isotherms of gelatin extracted from whitefish skin powder (FSGP) at different temperatures across a wide range of water activity were determined along with their thermodynamic properties. Nine mathematical models we...

Contamination of water by heavy metals is a major environmental concern due to the potential ecological impact on human health and aquatic ecosystems. In this work, we studied the chemical modification of various fruit peels such as banana (BP), gran...

Flax shives and beech wood residues represent biomass streams that are abundant in Northwest Europe. These primary feedstocks were evaluated for their suitability to produce biochar as a low environmental-impact adsorbent. The efficacy of the produce...

This manuscript describes the synthesis of dimethylethanolamine (DMEA)-grafted anion exchange membrane (AEM) by incorporating dimethylethanolamine as ion-exchange content into the polymer matrix via the solution casting method. The synthesis of the D...

Adsorption isotherms provide insight into the thermodynamic properties governed by food storage conditions. Adsorption isotherms of purple corn of the Canteño variety were evaluated at 18, 25, and 30 °C, for the equilibrium relative humidi...

This study focuses on investigating and comparing the influence of the surface functional groups and chemical matrices of macroporous resin on the Cr(III) exchange mechanism. The results discussed herein indicate that sulfonic resin removed Cr(III) i...

Dyes are the most carcinogenic organic compounds that are discarded by most of the textile industries without any prior treatment, which is harmful for the environment. This study aims to develop a bentonite-clay/carbon-nanotube (CNT)-based adsorbent...

The sorption of basic dyes onto magnetic nanosorbent is commonly used as a novel material to combat powdered activated carbon, which is difficult to handle and separate during water and wastewater treatment. This adsorption method is commonly impleme...

In this research, a vermiculite-kaolinite clay (VK) was used to prepare faujasite zeolites via alkaline fusion and hydrothermal crystallisation. The optimal synthesis conditions were 1 h fusion with NaOH at 800 °C, addition of deionised water to the...

Earth’s water balance and economy are becoming increasingly fragile due to overpopulation, global warming, severe environmental pollution and both surface and groundwater pollution. Therefore, it is essential to find solutions to the problems o...

The present study reports the engineering of functionalized chitosan (CH)-based biosorbent material. Herein, a two-step reaction was performed to chemically modify the CH using 1,4-bis(3-aminopropyl) piperazine to incorporate nitrogen basic centers f...

Hydrogels with polysaccharides as high polymer substrates have surprising advantages in wastewater treatment with complex components. Therefore, in this study, polysaccharides named EPS were extracted from Enteromorpha prolifera, a coastal pollutant...

Cork-derived biochars produced by slow pyrolysis (C-SP) and microwave-assisted pyrolysis (C-MWP) were evaluated for the removal of hexavalent chromium [Cr(VI)] from aqueous solutions. The materials were characterized by proximate/elemental analysis,...

This study explores the effectiveness of cow bone char as a low-cost, eco-friendly, and biodegradable adsorbent for removing Cu(II) and Ni(II) ions from acidic wastewater as challenging is due to heavy metal-contaminated industrial wastewater. Batch...

This study explored the effects of solution pH, biosorbent dose, contact time, and temperature on the Pb(II) biosorption process of natural and chemically treated leaves of A. compressa K. (Raw-AC and AC-OH, respectively). The results show that the s...

Bamboo is known as the “world’s second largest forest”. The bamboo industry has become a globally recognized green industry, and the research and development of bamboo-based products have huge economic, ecological, and cultural valu...

In the present work, the adsorption mechanism and capacity of MWCNTs/CoFe2O4 nanocomposite as an adsorbent were investigated. Levofloxacin (LFX), a widely used antibiotic, was selected as a hazardous model contaminant in aqueous solutions. The surfac...