- Communication
An FMCW LiDAR (frequency-modulated continuous-wave light detection and ranging) is a sensor that can measure distance using optical interference frequency (
An FMCW LiDAR (frequency-modulated continuous-wave light detection and ranging) is a sensor that can measure distance using optical interference frequency (
In frequency-sweep polarization-modulation ranging, distance is determined by the frequency of modulated waves and the corresponding wavelength multiple when emitted and returned waves are in phase. However, measurement of the frequency and the wavel...
We make a detailed comparison of frequency modulation spectroscopy (FMS) and modulation transfer spectroscopy (MTS) and of their applications in stabilizing laser frequency. In both FMS and MTS, intensity modulations of probe beam are observed in sat...
Laser interferometers can achieve a nanometer-order uncertainty of measurements when their frequencies are locked to the reference frequencies of the atom or molecule transitions. There are three types of displacement-measuring interferometers: homod...
A mathematical model of an autodyne oscillator with a combined amplitude-frequency modulation, which is under the influence of its own radiation reflected from the target, is developed. The main relations are obtained for analyzing the autodyne respo...
Linear frequency modulation (LFM) waveforms have been widely adopted due to their excellent performance characteristics, such as good Doppler tolerance and ease of physical implementation. However, LFM waveforms suffer from high autocorrelation sidel...
The vibration signal from the rotatory machinery condition monitoring under time-varying speed is usually amplitude-modulated (AM) and frequency-modulated (FM). It is important to efficiently and accurately estimate the instantaneous frequency (IF) o...
In wireless communication, information security, and anti-interference technology, modulation recognition of frequency-hopping signals has always been a key technique. Its widespread application in satellite communications, military communications, a...
Time-modulated metasurfaces offer a novel technical approach for actively modulating and reconstructing radar target characteristics through their dynamic control of electromagnetic waves. However, existing SAR feature reconstruction methods based on...
Reconfigurable intelligent surface (RIS)-aided index modulation (IM) shows great potential for next-generation wireless communications. Nevertheless, obtaining channel state information (CSI) for RIS-based IM incurs high pilot overhead, particularly...
With the rapid increase in the proportion of wind power, the frequency stability problem of power system is becoming increasingly serious. Based on MATLAB/Simulink simulation, the role and effect of secondary frequency modulation assisted by Flywheel...
In this paper, we propose underwater acoustic (UWA) communications using a generalized sinusoidal frequency modulation (GSFM) waveform, which has a distinct ambiguity function (AF) and correlation function characteristic. For these reasons, it is mor...
The self-resonating water jet offers the advantages of both a cavitation jet and a pulsed jet, and thus has been widely used for many practical applications. In the present study, the 120° -impinging edge Helmholtz nozzle was investigated for better...
Atom gravimeters use locked lasers to manipulate atoms to achieve high-precision gravity measurements. Frequency modulation spectroscopy (FMS) is an accurate method of optical heterodyne spectroscopy, capable of the sensitive and rapid frequency lock...
This paper proposes an optimized variable-frequency phase-shift modulation strategy based on frequency-domain analysis to address the issues of large reactive circulating current and low transmission efficiency in dual-active-bridge (DAB) converters...
This paper introduces a thermoelectric-type sensor with a built-in heater as an alternative approach to the measurement of vacuum pressure based on frequency modulation. The proposed sensor is fabricated using the TSMC (Taiwan Semiconductor Manufactu...
In this study, we demonstrated the feasibility of a wireless strain sensor using resonant frequency modulation through tensile impedance test and wireless sensing test. To achieve a high stretchability, the sensor was fabricated by embedding a copper...
A new, low-cost method of simultaneously measuring and communicating voltage and current on distribution networks is presented. Based on Frequency Modulation (FM) of the measured fundamental frequency (and harmonics), followed by immediate re-injecti...
This study introduces an innovative phase-sensitive optical time-domain reflectometer (φ-OTDR) technology based on orthogonal frequency-division multiplexing (OFDM) and nonlinear frequency modulation (NLFM) pulse modulation sequences. The propose...
We present a detailed experimental investigation of the use of a novel actuator for frequency tuning and modulation in a quantum cascade laser (QCL) based on a resistive integrated heater (IH) placed close to the active region. This new actuator is a...
Synthetic Aperture Radar (SAR) has unique advantages in ship monitoring at sea due to its all-weather imaging capability. However, its unique imaging mechanism presents two major challenges. First, speckle noise in the frequency domain reduces the co...
To obtain highly sensitive, accurate, fast, and repeatable measurements of waveplate parameters over an entire clear aperture, a novel measurement method using dual differential frequency photoelastic modulations is proposed. Simple polarimetry is co...
Frequency delta-sigma modulator (FDSM) employing a variable frequency oscillator is a novel replacement of the classical delta-sigma modulators. This is advantageous for application to sensors, because an ADC can be intrinsically integrated with the...
In orthogonal time frequency space (OTFS) modulation, information-carrying symbols reside in the delay-Doppler (DD) domain. By operating in the DD domain, an appealing property for communication arises: time-frequency (TF) dispersive channels encount...
Synthetic aperture radar (SAR) imaging is vulnerable to deceptive jamming, while conventional whole-aperture subsection shift-frequency modulation sequentially applies multiple frequency shifts in slow time, causing reduced temporal support for each...
Recently, orthogonal time frequency space modulation with index modulation (OTFS-IM) has been proposed to improve the bit-error-rate (BER) performance of the OTFS system. However, only some of the grids in the OTFS-IM system are activated, resulting...
The direction-of-arrival (DOA) estimation of multiple linear frequency modulation (LFM) signals typically requires the construction of a spatial time–frequency distribution (STFD) matrix via linear transforms or quadratic time–frequency d...
Laser processing platform for micro crystal resonator (MCR) frequency modulation is an important piece of equipment to apply laser etching technology to the MCR frequency modulation process. The positioning accuracy of the laser processing platform h...
In order to eliminate the frequency mismatch of MEMS (Microelectromechanical Systems) gyroscopes, this paper proposes a frequency tuning technology based on a quadrature modulation signal. A sinusoidal signal having a frequency greater the gyroscope...
Interrupted sampling repeater jamming (ISRJ) is a classic active coherent jamming. Due to its structural limitations, it has inherent defects such as a discontinuous time–frequency (TF) distribution, strong distribution regularity of pulse comp...
Blind modulation classification is an important step in implementing cognitive radio networks. The multiple-input multiple-output (MIMO) technique is widely used in military and civil communication systems. Due to the lack of prior information about...
In this paper, we develop a variable-frequency pulse width modulation (VFPWM) circuit for input control of 6.78-MHz resonant wireless power transfer (WPT) systems. The zero-voltage switching control relies on the adjustments of both duty cycle and sw...
The adjustment of the natural frequency of a micro crystal resonator (MCR) is the key requirement in its manufacturing, which determines the actual performance of the product. Laser processing is a new method for MCR frequency modulation, and its pro...
Piezoelectric vibration energy harvester (PVEH) is a promising device for sustainable power supply of wireless sensor nodes (WSNs). PVEH is resonant and generates power under constant frequency vibration excitation of mechanical equipment. However, i...
Interrupted-sampling repeater jamming (ISRJ) is widely used in the field of electronic countermeasures, and can severely affect radar detection. Therefore, the problem of ISRJ suppression is a compelling task. In this paper, we propose an ISRJ suppre...
To address the vulnerability of traditional linear frequency-modulated continuous wave (FMCW) fuze to jamming due to fixed modulation parameters, this paper proposes a novel fuze waveform design scheme using chaotic code-based frequency and phase com...
The 3 × 3 demodulation algorithm has been widely used in retrieving the phase information in the optical fiber sensing system, while the asymmetry of the 3 × 3 coupler can introduce some distortions. In this situation, the parameters of t...
Frequency stability of a 509-nm single-frequency laser, a core component combined with an 852-nm single-frequency laser for two-step cesium Rydberg transitions, is critical for quantum control and metrology precision. Utilizing atomic transition as t...
Under the condition of low SNR, enhancing the precision of parameter estimation for linear frequency modulation (LFM) signals and diminishing the complexity of the relevant methods represent crucial challenges that are presently being confronted. To...
Automatic modulation classification (AMC) is a core capability for spectrum monitoring, adaptive receivers, and electronic support. Most radio-frequency machine learning (RFML) studies train multi-class classifiers on benchmark datasets that contain...
To eliminate the sensitivity of frequency-swept interferometric ranging to Doppler-induced errors and laser frequency-sweeping nonlinearities, as well as to overcome the limitations of existing suppression strategies—such as strict synchronizat...
Plasma power supplies find extensive applications across industrial, energy, environmental, and medical domains. This study addresses limitations of conventional plasma power supplies, including high harmonic current content, neutral-point potential...
Joint training across heterogeneous paired underwater image enhancement (UIE) datasets broadens the range of supervised training conditions but requires a shared model to learn how the mapping from an observation to its reference varies across source...
The group velocity dispersion (GVD) occurring in the front end of high-power lasers is one of the primary factors leading to the conversion of frequency modulation (FM) to amplitude modulation (AM). In this paper, we propose a modified, active, close...
We report the frequency stabilization of an external cavity diode laser (ECDL) to a reference molecular iodine (I2) transition at 13,531.18 cm−1 (739.03382 nm). Using the Modulation Transfer Spectroscopy (MTS) method for the highly sensitive de...
To estimate the direction of arrival (DOA) of a linear frequency modulation (LFM) signal in a low signal-to-noise ratio (SNR) hydroacoustic environment by a small aperture array, a novel deconvolved beamforming method based on fractional Fourier doma...
Long Range (LoRa) is one of the promising Low-Power Wide-Area Network technologies to achieve a strong anti-noise ability due to the modulation of the chirp spread spectrum in low-power and long-distance communications. However, LoRa suffers the prob...
Asymmetric Cascaded H-bridge (ACHB) level inverters can output more voltage waveforms with fewer cascaded units while ensuring the quality of output voltage waveforms, so they have attracted more and more attention. Taking the topology of Type-III as...
Automatic modulation recognition (AMR) stands as a crucial core technology within the realm of signal processing and perception, playing a significant part in harsh electromagnetic environments. The time–frequency image (TFI) of communication s...
In most high power industrial applications, the low switching frequency modulations (LSFM) are usually implemented to reduce power loss and heat dissipation pressure. However, there are some unexpected influences caused by the low order harmonic sinu...
of 176