Skip to Content
You are currently on the new version of our website. Access the old version .

277 Results Found

  • Article
  • Open Access
135 Views
19 Pages

Thermal Input-Driven Interfacial Phase Evolution and Mechanical Reliability of Zn-15Al Brazed Cu/Al Joints

  • Tao Chen,
  • Peng He,
  • Tengzhou Xu,
  • Jingyi Luo and ,
  • Yinyu Liu,
  • Liangyu Di,
  • Jiaxing Zhang and
  • Jiaxin Li
  • + 3 authors+ 0 author

22 October 2026

The effects of brazing temperature and holding time on the interfacial evolution and shear strength of Cu/Zn-15Al/Al joints were investigated. Joints were prepared at 480–540 °C for 1–9 min and characterized by SEM, EDS, shear testing...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Feature Paper
  • Article
  • Open Access
1 Citations
1,382 Views
14 Pages

16 January 2026

The bonding behavior of the Ni-based superalloy CM247LC during transient liquid phase (TLP) bonding is strongly governed by filler metal chemistry, particularly boron activity. In this study, the time-dependent bonding mechanisms of CM247LC joints fa...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
50 Views
23 Pages

Pore-Scale Gas–Liquid Two-Phase Flow and Liquid Retention in Rough Pore Throats

  • Chao Xu,
  • Yijun Gao,
  • Pinghua Shu,
  • Youheng Leng and ,
  • Jinreng Fan,
  • Linwei Jiang,
  • Lu Li,
  • Yongcheng Mou,
  • Lijun Liu and
  • Shiting Shen
  • + 5 authors+ 0 author

5 November 2026

CO2 injection offers multiple potential benefits in subsurface energy systems, including enhanced gas recovery, reservoir-pressure maintenance, mitigation of liquid blockage in water-bearing gas reservoirs, and geological storage. However, CO2–...

(This article belongs to the Special Issue Multiphase Flow and Reactive Processes of CO2 in Wellbore–Reservoir Systems During Drilling, Completion and Production)
  • Article
  • Open Access
583 Views
23 Pages

20 July 2026

A numerical framework is developed to simulate reactive liquid–solid phase transformations in molten steel by coupling chemical reactions, phase-field evolution, and solute diffusion, together with thermodynamic data for oxide formation. The gr...

(This article belongs to the Special Issue Advances in the Processing, Mechanical Properties and Numerical Simulation of Steel)
  • Article
  • Open Access
20 Citations
7,206 Views
8 Pages

A Dewetting Model for Double-Emulsion Droplets

  • Zhanxiao Kang,
  • Pingan Zhu,
  • Tiantian Kong and
  • Liqiu Wang

1 November 2016

The evolution of double-emulsion droplets is of great importance for the application of microdroplets and microparticles. We study the driving force of the dewetting process, the equilibrium configuration and the dewetting time of double-emulsion dro...

(This article belongs to the Special Issue Selected Papers from 2016 International Conference of Microfluidics, Nanofluidics and Lab-on-a-Chip)
  • Review
  • Open Access
1 Citations
1,810 Views
78 Pages

Gas Evolution and Two-Phase Flow in Water Electrolyzers: A Review

  • Jingxin Zeng,
  • Junxu Liu,
  • Keyi Wang,
  • Yuhang An and ,
  • Yuanyuan Duan and
  • Qiang Song
  • + 1 author+ 0 author

8 April 2026

Driven by the large-scale deployment of renewable electricity, water electrolysis has emerged as a leading pathway for high-efficiency hydrogen production. Under practical operating conditions, gas evolution and gas–liquid two-phase flow inside...

  • Editorial
  • Open Access
464 Views
1 Page

Colloidal systems and interfacial phenomena underpin a multitude of applied technologies through their ability to control the evolution and interactions of dispersed phases [...]

(This article belongs to the Section Application of Colloids and Interfacial Aspects)
  • Article
  • Open Access
4 Citations
3,429 Views
10 Pages

Droplets at Liquid-Fluid Interfaces: Stages Leading to Coalescence

  • Jose Davalos-Monteiro,
  • Qi Liu and
  • J. Carlos Santamarina

12 May 2025

Droplet coalescence at interfaces affects industrial and natural processes. Previous studies focused on droplet stability and thin film drainage. We use meticulous experiments to infer the evolution of coalescence for both ascending and descending dr...

(This article belongs to the Section Flow of Multi-Phase Fluids and Granular Materials)
  • Review
  • Open Access
25 Citations
6,197 Views
39 Pages

Review of the Interfacial Structure and Properties of Surfactants in Petroleum Production and Geological Storage Systems from a Molecular Scale Perspective

  • Jihui Jia,
  • Shu Yang,
  • Jingwei Li,
  • Yunfeng Liang and ,
  • Rongjuan Li,
  • Takeshi Tsuji,
  • Ben Niu and
  • Bo Peng
  • + 3 authors+ 0 author

Surfactants play a crucial role in tertiary oil recovery by reducing the interfacial tension between immiscible phases, altering surface wettability, and improving foam film stability. Oil reservoirs have high temperatures and high pressures, making...

(This article belongs to the Topic Energy Extraction and Processing Science)
  • Article
  • Open Access
1 Citations
1,478 Views
19 Pages

28 January 2026

Interfacial reactions between Sn-based solders and Au/Pd/Ni metallization were investigated at 260 °C, with particular emphasis on the effects of Pd and Sn thicknesses. Au/Pd/Ni substrates with Pd layers of approximately 70 nm, 200 nm, and 1 &mic...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
1,064 Views
12 Pages

MnBr2-Doped CsPbBr3 Nanocrystal Passivation Layer for High-Efficiency and Stable Perovskite Solar Cells

  • Weiye Wang,
  • Chenyuan Shang,
  • Xiaolong Li,
  • Cuncun Wu and
  • Yangyang Zhang

6 March 2026

Perovskite (ABX3) nanocrystals have garnered significant attention as interfacial passivation materials for perovskite solar cells (PSCs) due to their tunable optoelectronic properties. However, single-component systems often suffer from insufficient...

(This article belongs to the Section Surface Engineering for Energy Harvesting, Conversion, and Storage)
  • Article
  • Open Access
3 Citations
2,290 Views
12 Pages

5 May 2024

This study investigated the interfacial reactions between n-type Bi2(Te,Se)3 thermoelectric material, characterized by a highly-oriented (110) plane, and pure Sn and Sn-3.0Ag-0.5Cu (wt.%) solders, respectively. At 250 °C, the liquid-state Sn/Bi2(...

(This article belongs to the Special Issue Welding, Joining, and Additive Manufacturing of Metals and Alloys)
  • Article
  • Open Access
191 Views
26 Pages

16 October 2026

Dense non-aqueous phase liquids (DNAPLs) pose persistent challenges for subsurface characterization because their migration, retention, and phase partitioning are difficult to resolve using conventional monitoring approaches. Spectral induced polariz...

(This article belongs to the Section Water Quality and Contamination)
  • Article
  • Open Access
9 Citations
3,345 Views
19 Pages

20 September 2023

The formation and evolution of microstructures at the Ni/Fe interface in dissimilar metal weld (DMW) between ferritic steel and austenitic stainless steel were investigated. Layered martensitic structures were noted at the nickel-based weld metal/12C...

(This article belongs to the Special Issue Physical Metallurgy of Metals and Alloys II)
  • Article
  • Open Access
7 Citations
3,253 Views
14 Pages

11 June 2021

Degradation of electrode microstructure is one of the key factors affecting long term performance of Solid Oxide Fuel Cell systems. Evolution of a multiphase system can be described quantitatively by the change in its interfacial energy. In this pape...

(This article belongs to the Section D: Energy Storage and Application)
  • Article
  • Open Access
8 Citations
2,934 Views
13 Pages

Morphological Evolution and Interfacial Effects Analysis of Drop Motion in Transverse Vibration of Inclined Plate

  • Jing Xu,
  • Jingxuan Ma,
  • Jing Ni,
  • Shaochao Fan and ,
  • Linan Zhang and
  • Ruijin Wang
  • + 1 author+ 0 author

30 August 2020

Based on experimental and simulation research, analysis of the morphological evolution and interfacial effects of drop motion in the transverse vibration of inclined micro-textured plate are studied. Experimental results show the morphological evolut...

  • Article
  • Open Access
3 Citations
1,147 Views
20 Pages

Stress–Strain and Structural Evolution on the Localized Interface of Stainless Steel Clad Plate

  • Yinpeng Wang,
  • Bo Gao,
  • Qiqing Tian,
  • Chunhui Jiang and ,
  • Lu Zhu,
  • Yanguang Cao,
  • Wei Wei and
  • Zhaodong Li
  • + 3 authors+ 0 author

10 July 2025

By applying different heat treatment processes (furnace cooling, air cooling, and water cooling), the stress–strain behavior of the localized interfacial region in weathering steel–stainless steel clad plates was investigated using nanoin...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
135 Views
25 Pages

Effect of Sc Microalloying on Interfacial Microstructural Evolution in Al/Mg Bimetallic Composites Fabricated by Lost Foam Compound Casting

  • Jinxin Liu,
  • Taoxiong Guo,
  • Ziwei Peng,
  • Xiaopeng Yu and ,
  • Lihui Zhang,
  • Xingyu Huang and
  • Wenming Jiang
  • + 2 authors+ 0 author

22 October 2026

Sc microalloying was introduced into A356 Al inserts to regulate interfacial microstructural evolution in A356/AZ91D bimetallic composites fabricated by lost foam compound casting. Nominal Sc additions of 0, 0.6, 0.9, and 1.2 wt.% were investigated u...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
519 Views
32 Pages

28 May 2026

Shock-induced gas/water interfacial instability is important in multiphase flow processes involving rapid deformation, mixing, and breakup. In this study, the evolution of shock-impacted gas/water interfaces was investigated using high-speed images f...

(This article belongs to the Section Process Control, Modeling and Optimization)
  • Article
  • Open Access
1 Citations
839 Views
14 Pages

High-Conductivity Solid-State Electrolytes Through Low-Temperature Hot-Pressing of LCBA/LATP Composites

  • Wookyung Lee,
  • Jaeseung Choi,
  • Jungkeun Ahn,
  • Hanbyul Lee and ,
  • Byungwook Kim,
  • Youngsoo Seo and
  • Changbun Yoon
  • + 2 authors+ 0 author

13 May 2026

Solid-state electrolytes (SSEs) are essential for achieving long-term stability and fast-charging performance in secondary batteries. Although Li1.3Al0.3Ti1.7(PO4)3 (LATP) offers high ionic conductivity, its practical application is restricted by hig...

(This article belongs to the Section Materials Chemistry)
  • Article
  • Open Access
1 Citations
2,025 Views
10 Pages

30 January 2024

In this research, the wavy ice patterns that form due to the evolution of morphological perturbations on the water–ice phase transition interface in the presence of a fluid flow are studied. The mathematical model of heat transport from a relat...

(This article belongs to the Special Issue Phase Transition in External Fields (2nd Edition))
  • Article
  • Open Access
6 Citations
4,325 Views
15 Pages

Analytical Modeling of the Mixed-Mode Growth and Dissolution of Precipitates in a Finite System

  • Tohid Naseri,
  • Daniel Larouche,
  • Rémi Martinez,
  • Francis Breton and
  • Denis Massinon

14 August 2019

In this paper, a novel analytical modeling of the growth and dissolution of precipitates in substitutional alloys is presented. This model uses an existing solution for the shape-preserved growth of ellipsoidal precipitates in the mixed-mode regime,...

(This article belongs to the Special Issue Phase Transformations in Aluminium Alloys)
  • Article
  • Open Access
666 Views
19 Pages

Preparation of Spherical δ-Nb3Al Powders and Their Phase Transition Behavior in Powder Metallurgy Nickel-Based Superalloys During Hot Isostatic Pressing

  • Xiao Liu,
  • Boning Zhang,
  • Guowei Wang,
  • Hongliang Liu and ,
  • Feilong Zhang,
  • Yang Gao,
  • He Mao and
  • Lei Zheng
  • + 3 authors+ 0 author

13 April 2026

The feasibility of using brittle δ-Nb3Al as the reinforcement phase in powder metallurgy nickel-based superalloys depends on both the preparation of near-spherical particles and their phase stability during hot isostatic pressing (HIP). In this...

  • Article
  • Open Access
10 Citations
4,706 Views
15 Pages

Effect of Heat Treatment on Microstructure and Mechanical Properties of the AZ31/WE43 Bimetal Composites

  • Dexing Xu,
  • Kangning Zhao,
  • Changlin Yang,
  • Hongxiang Li and
  • Jishan Zhang

20 November 2018

Effect of heat treatment on the microstructure and mechanical properties of the AZ31/WE43 bimetal composites was investigated, and the optimized solution treatment and ageing treatment parameters were achieved. After heat treatment, it was found that...

  • Article
  • Open Access
205 Views
21 Pages

Dual Functionality of Chitosan in Chia Oil-in-Water Emulsions: From Interfacial Behavior to Short-Term Stability

  • Fátima Vela,
  • Francisco Carrillo,
  • Victor M. Pizones Ruiz-Henestrosa,
  • Cecilio Carrera and
  • Nuria Calero

20 October 2026

Physical stability of chitosan (CH)-based emulsions was investigated and compared with emulsions formulated with egg yolk (EY), a conventional food emulsifier. Additionally, a mixture of both components was examined to assess its potential to improve...

(This article belongs to the Section Food Physics and (Bio)Chemistry)
  • Review
  • Open Access
640 Views
21 Pages

Defect Mechanisms and Microstructural Regulation in Be–Al Alloys Across Multiple Fabrication Routes

  • Geng Cao,
  • Shaopeng Wu,
  • Dongxin Wang,
  • Zhaopeng Yang and ,
  • Lipeng Yang and
  • Xixi Su
  • + 1 author+ 0 author

3 August 2026

Be–Al alloys are attractive for aerospace and precision-engineering applications because of their low density, high specific stiffness, and excellent dimensional stability. However, their broader application is constrained by multiscale defects...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
711 Views
18 Pages

Rheology and Oil–Water Emulsion Stability During Biodegradation of Hydrolyzed Polyacrylamide by Delftia lacustris EPDB-8

  • Bingjian Sun,
  • Yanshuo Li,
  • Wei Liu,
  • Xin Hu and ,
  • Shichong Guo,
  • Yiming Li,
  • Jinren Lu,
  • Haoshuai Li and
  • Mutai Bao
  • + 4 authors+ 0 author

22 May 2026

Hydrolyzed polyacrylamide stabilized oil-in-water emulsions are highly persistent because the polymer strengthens both continuous-phase rheology and the oil–water interfacial film, making demulsification difficult in polymer-flooding produced l...

(This article belongs to the Section Biobased and Biodegradable Polymers)
  • Feature Paper
  • Article
  • Open Access
1 Citations
2,994 Views
14 Pages

3 December 2021

Analyses in the present study focus on understanding the evolution of the tungsten microstructure under He/D irradiation. A fractal dimension analysis was utilized to characterize the structural pattern of the microstructure irradiated by both low (1...

(This article belongs to the Special Issue Reliability of Structural Integrity and Engineering Materials)
  • Article
  • Open Access
460 Views
18 Pages

Trace Y2O3-Mediated Interface Engineering Breaks the Conductivity–Wear Trade-Off in Spark-Plasma-Sintered Cu-Ni-Mn-Si Alloy

  • Wei Lisi,
  • Bo Zhang,
  • Sarula Xi,
  • Wei Lesi and ,
  • Dihao Wang and
  • Xinba Yaer
  • + 1 author+ 0 author

15 September 2026

Achieving simultaneous enhancement of electrical conductivity and wear resistance in copper alloys remains challenging because conventional strengthening strategies often introduce additional electron-scattering sources and degrade electrical transpo...

(This article belongs to the Section Metal Surface Process)
  • Article
  • Open Access
1 Citations
2,439 Views
13 Pages

15 November 2021

The microstructure evolution characteristics and the shear strength of bond and base alloys were investigated during the press bonding of the Ti–5Al–2Sn–2Zr–4Mo–4Cr alloy. The quantitative detection of the interfacial void shows that the interfacial...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Review
  • Open Access
13 Citations
4,617 Views
17 Pages

Biological Interfacial Materials for Organic Light-Emitting Diodes

  • Amjad Islam,
  • Syed Hamad Ullah Shah,
  • Zeeshan Haider,
  • Muhammad Imran and ,
  • Al Amin,
  • Syed Kamran Haider and
  • Ming-De Li
  • + 2 authors+ 0 author

31 May 2023

Organic optoelectronic devices have received appreciable attention due to their low cost, mechanical flexibility, band-gap engineering, lightness, and solution processability over a broad area. Specifically, realizing sustainability in organic optoel...

(This article belongs to the Section A: Physics)
  • Article
  • Open Access
336 Views
16 Pages

Balancing Structural Ordering and Electrochemical Performance in LiNi0.94Co0.06O2 Cathodes via PVA-Assisted Synthesis

  • Sung Geun Song,
  • Seong-Do Kim,
  • Ha Eun Kang,
  • Hae Yeong Lee and ,
  • Min-Kwon Park,
  • Dong-Joo Kim,
  • Young Soo Yoon and
  • Sang Jin Lee
  • + 3 authors+ 0 author

12 October 2026

Ni-rich layered oxide cathodes are promising candidates for high-energy-density lithium-ion batteries; however, their electrochemical performance is strongly influenced by structural evolution, lithium stoichiometry, interfacial properties, and parti...

(This article belongs to the Special Issue Earth-Abundant Active Materials for Li/Na-Ion Batteries: Development, Recycling and Manufacturing)
  • Article
  • Open Access
9 Citations
3,228 Views
13 Pages

Long-Term Aging Study on the Solid State Interfacial Reactions of In on Cu Substrate

  • Han-Tang Hung,
  • Fu-Ling Chang,
  • Chin-Hao Tsai,
  • Chia-Yi Liao and
  • C. R. Kao

18 September 2023

Indium is considered a candidate low-temperature solder because of its low melting temperature and excellent mechanical properties. However, the solid-state microstructure evolution of In with different substrates has rarely been studied due to the s...

(This article belongs to the Special Issue Microstructure Engineering of Metals and Alloys, Volume II)
  • Article
  • Open Access
2 Citations
1,274 Views
14 Pages

20 May 2025

This study investigates the interfacial reactions of FeCoNiCr and FeCoNiMn medium-entropy alloys (MEAs) with Sn and Sn-3Ag-0.5Cu (SAC305) solders at 250 °C. The evolution of interfacial microstructures is analyzed over various aging periods. For comp...

(This article belongs to the Section Thin Films and Interfaces)
  • Review
  • Open Access
6 Citations
2,464 Views
23 Pages

Fe-Based Catalysts in MgH2 Hydrogen Storage: Mechanistic Insights, Stability Challenges, and a Roadmap for Scalable Design

  • Quanhui Hou,
  • Qianyang Wang,
  • Xue Du,
  • Zhihao Xu and ,
  • Xiao Xu,
  • Yunxuan Zhou and
  • Zhao Ding
  • + 2 authors+ 0 author

11 January 2026

Magnesium hydride (MgH2) is a promising solid-state hydrogen storage material owing to its high hydrogen capacity and low cost, yet its practical application is limited by sluggish kinetics, high operating temperatures, and poor cycling stability. Am...

(This article belongs to the Special Issue The Research of Change: Catalysts for a Sustainable Future)
  • Article
  • Open Access
1 Citations
607 Views
20 Pages

29 January 2026

The long-term interfacial reliability of Cu/Al brazed joints is critical for power equipment but is often compromised by severe intermetallic compound (IMC) degradation during thermal aging. This study investigates the evolution mechanism and mechani...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
5 Citations
2,628 Views
20 Pages

27 May 2023

In this study, the bonding of a CuW/Al composite with a Ni interlayer was designed and established by vacuum hot-pressing diffusion bonding. The interfacial microstructure was systematically discussed based on experimental characterization and first-...

  • Feature Paper
  • Article
  • Open Access
4 Citations
3,104 Views
14 Pages

6 August 2023

Flashing flows of initially sub-cooled water in a converging–diverging nozzle is investigated numerically in the framework of the two-fluid model (TFM). The thermal non-equilibrium effect of phase change is considered by an interfacial heat tra...

(This article belongs to the Special Issue Computational Fluid Dynamics: Modelling of Industrial Flashing Processes)
  • Article
  • Open Access
13 Citations
3,503 Views
13 Pages

26 September 2021

The Al-Mg alloy structure reinforced with carbon nanotubes was evaluated after the composites production through a modified flake metallurgy technique followed by hot extrusion. The obtained bimodal microstructure of the matrix allowed to identify th...

(This article belongs to the Special Issue Advances in Powder Metallurgy)
  • Feature Paper
  • Article
  • Open Access
500 Views
23 Pages

22 May 2026

Before launch, cryogenic propellant tanks experience a pre-pressurization stage during which their thermodynamic behavior is sensitive to operating conditions and external disturbances. For liquid hydrogen (LH2) storage tanks, small-amplitude oscilla...

(This article belongs to the Special Issue Green Manufacturing and Low-Carbon Control of Mechanical and Electrical Products)
  • Article
  • Open Access
421 Views
20 Pages

Effect of Cobalt-Based Filler Wire Composition on the Microstructure and High-Temperature Properties of Cladding Layers on Ni-Based Superalloy

  • Shuai Huang,
  • Tianyuan Wang,
  • Wei Liu,
  • Yu Wu and ,
  • Jian Miao,
  • Guohui Zhang,
  • Bingqing Chen and
  • Biao Zhou
  • + 3 authors+ 0 author

17 July 2026

To improve the high-temperature service performance of cladding layers on DD5 single crystal superalloy, this study comparatively investigated the effects of two cobalt-based filler wires, PMet931 and PMet994, on the microstructural evolution, hardne...

(This article belongs to the Special Issue Additive Manufacturing and Forming Technologies of Alloy: Mechanical Properties and Microstructure Evaluation (Second Edition))
  • Article
  • Open Access
426 Views
17 Pages

Effects of Simulated Service Environments on the Microstructure and Interfacial Properties of Ceramic Fiber-Reinforced Al-Matrix Composites

  • Desheng Chu,
  • Yanhan Wang,
  • Fangrong Zhou,
  • Ronghai Liu and ,
  • Longchang Zhu and
  • Qingjun Peng
  • + 1 author+ 0 author

12 May 2026

SiC fiber-reinforced aluminum matrix (SiCf/Al) composites have the potential to replace titanium alloys for fan/compressor blades due to their low density and favorable high-temperature performance. In this study, thermal exposure and thermal cycling...

(This article belongs to the Section Advanced Composites)
  • Review
  • Open Access
1 Citations
1,055 Views
23 Pages

Recycled Aggregate Concrete Research (1983–2025): A Global Bibliometric and Thematic Evolution Analysis for Sustainable Material Design

  • Mayling Cornejo-Meza,
  • Gloria Rubio-Cunishpuma,
  • Kenny Escobar-Segovia and
  • Natividad Garcia-Troncoso

The rapid expansion of sustainable construction practices has significantly increased research on recycled aggregate concrete (RAC) over the past four decades. However, despite the growing volume of studies, a comprehensive longitudinal assessment of...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
16 Citations
3,317 Views
18 Pages

Study on Deformation Characteristics and Microstructure Evolution of 2205/AH36 Bimetal Composite in a Novel Hot Forming Process

  • Zhou Li,
  • Haibo Xie,
  • Fanghui Jia,
  • Yao Lu and ,
  • Xiangqian Yuan,
  • Sihai Jiao and
  • Zhengyi Jiang
  • + 2 authors+ 0 author

15 October 2020

A new hot forming process of a hot-rolled 2205 duplex stainless/AH36 low-carbon steel bimetal composite (2205/AH36 BC) was proposed in this study, using the Gleeble 3500 thermal-mechanical simulator and hot bending tools. The deformation characterist...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
2 Citations
2,601 Views
26 Pages

Enhanced Hydrogen Production via Photocatalysis Using g-C3N4/ZIF-67 Hybrid Composites

  • Jesús Sebastián Rodríguez-Girón,
  • Bryan Emmanuel Alvarez-Serna,
  • Diana Berenice Hernández-Uresti,
  • Daniel Sánchez-Martínez and ,
  • Ruby Sheila Gines-Palestino,
  • Luis Antonio Velázquez-Herrera,
  • Alfredo Alberto Morales-Tapia,
  • Rodolfo Peña-Rodríguez,
  • Delfino Hernández-Lascares and
  • Adán Cabal-Prieto
  • + 5 authors+ 0 author

8 January 2026

This research reports the development of photocatalytic active composites for hydrogen evolution obtained through high-energy mechanical milling of a mixture of the organic semiconductor g-C3N4 (CN) and the metal–organic framework ZIF-67. These...

(This article belongs to the Special Issue Synthesis, Characteristics and Applications of Nanoparticles for Photocatalysis)
  • Article
  • Open Access
788 Views
21 Pages

Influence of Polycarboxylate Superplasticizer on Rheological Behavior and Early Interfacial Evolution of Phosphogypsum-Based Supersulfated Cement

  • Dafu Wang,
  • Lehuan Kuang,
  • Shaoyang Ding,
  • Yudong Sun and ,
  • Yuejing Li,
  • Ziyu Chen,
  • Jun Ren and
  • Xincheng Li
  • + 3 authors+ 0 author

23 April 2026

Driven by global carbon reduction targets, supersulfated cement has emerged as a promising low-carbon cementitious material. This study investigates the influence of a polycarboxylate superplasticizer (PCE) on the rheological behavior and early inter...

(This article belongs to the Special Issue Application of Polymers in Cementitious Materials)
  • Article
  • Open Access
538 Views
22 Pages

25 June 2026

To elucidate the scale-dependent response and interfacial evolution of liquid capillary rise in glass capillaries under an electric field, capillaries with different inner diameters were used as model channels. The equilibrium capillary-rise behavior...

  • Article
  • Open Access
331 Views
23 Pages

Formation of Dual-Scale TiC Reinforcements Under Different Energy Densities and Their Influence on the Properties of Laser Metal Deposited 316L Composites

  • Heng Zhu,
  • Quan Zhu,
  • Weijie Xia,
  • Chao Lu and ,
  • Xiaoli Cui,
  • Yan Yin,
  • Yutong Gao,
  • Ruihua Zhang,
  • Xiaoan Zeng and
  • Di Tie
  • + 6 authors+ 1 author

21 September 2026

Laser melting deposition (LMD) was employed to fabricate 5.0 wt.% TiC-reinforced 316L composite coatings, and the role of laser power in governing microstructure evolution and performance was systematically investigated. Particular emphasis was place...

(This article belongs to the Special Issue Development and Applications of Laser-Based Additive Manufacturing (Second Edition))
  • Article
  • Open Access
2 Citations
570 Views
22 Pages

22 July 2026

Interfacial bond failure is a common form of distress in rigid–flexible composite pavements, especially in tunnel environments with harsh service conditions. Epoxy-emulsified asphalt (EEA) is widely used as a high-performance interlayer bond co...

(This article belongs to the Special Issue Advanced Coating Barriers for the Protection of Reinforced Concrete and Pavement, 3rd Edition)
  • Article
  • Open Access
153 Views
18 Pages

Transient Liquid Phase Bonding Using Sputtered Cu/Sn Multilayers

  • Dong-Yurl Yu,
  • Junhyuk Son,
  • Yun-Chan Kim,
  • Yong-Ho Ko and ,
  • Tae-Young Lee,
  • So-Jeong Lee,
  • Dongjin Byun and
  • Junghwan Bang
  • + 3 authors+ 0 author

22 October 2026

Power electronic modules require bonding materials capable of maintaining high reliability during high-temperature operation. In this study, transient liquid phase (TLP) joints were fabricated using sputtered Cu/Sn multilayers, and their mechanical p...

(This article belongs to the Special Issue Research Advances in Microelectronics Packaging and Devices: From Materials to Reliability)

of 6