- Article
High-geothermal tunnels are subjected to complex thermo–hydro–mechanical (THM) coupling effects, where the interaction of temperature, seepage, and stress significantly influences the stability of surrounding rock. To address the limitati...
High-geothermal tunnels are subjected to complex thermo–hydro–mechanical (THM) coupling effects, where the interaction of temperature, seepage, and stress significantly influences the stability of surrounding rock. To address the limitati...
Ballast water systems in large LNG carriers are essential for proper operations and stability. Water withdrawn from the surrounding environment to supply to the ballast can pose entrainment and impingement risk to the resident fish population. Quanti...
Floating structures such as barges and ships affect near-field hydrodynamics and create a zone of influence (ZOI). Extent of the ZOI is of particular interest due to potential obstruction to and impact on out-migrating juvenile fish. Here, we present...
There is a body of literature on the influence range and traffic risk of fixed work zones. However, relatively few studies have examined the effect of ubiquitous moving operating vehicles, such as road cleaners, on urban roads. The influence of low s...
The aim of this study is to predict the influenced zone of deep excavation on adjacent tunnel displacement, evaluate the control effect of ground improvement, and give the optimal parameters for ground improvement. Based on the current research, a se...
Based on the statistics of 42 case histories, 732 finite element numerical simulations are conducted to determine the scope of the influenced zone of deep excavation under different conditions of excavation depth (He) and the maximum retaining wall d...
Rapid urbanization has intensified the Surface Urban Heat Island (SUHI) effect, which poses particular challenges for coastal cities where marine environments, climatic regulation, and distinctive urban morphology interact in complex ways. Current re...
Being at the forefront of China’s regional innovation and development, enterprises in the National Innovation Demonstration Zones must take the lead in completing high-quality transformation and upgrading. In this study, we use data from 1770 m...
Understanding the complex interplay between water management infrastructure and groundwater dynamics is crucial for sustainable resource utilization. This study investigates water infiltration dynamics in the secondary perched reach of the Yellow Riv...
Tridimensional cross tunnels usually manifest the vulnerable components of a high-speed railway caused by the sophistication of the structural pattern and the continuous shock from the train. The frequent defect of tunnel lining at the intersection w...
In order to understand and mitigate the deformation issues caused by the excavation of foundation pits within the influence area of fault zones, ensuring the safety of the subway system and supporting the sustainable development of the city, this pap...
During the operation period of tunnels in urban deep aquifer zones, the geological environment around the tunnel is complex and the surrounding strata are rich in groundwater, which often poses a risk of structure cracking and groundwater leakage, se...
Understanding the spatial association network structure and carbon balance zoning of land-use carbon emissions (LUCEs) is essential for guiding regional environmental management. This study constructs a LUCE spatial association network for Hubei Prov...
Urban–rural transition zones (URTZs) represent critical spatial units where urban expansion interacts with ecosystems. In arid regions, however, the response of ecological environmental quality (EEQ) to rapid urban expansion and spatial restruc...
One of the main problems related to the excavation of dog headings in coal beds is the emission of methane during this process. To prevent the occurrence of dangerous concentration levels of this gas, it is necessary to use an appropriate ventilation...
During the Northridge earthquake, extensive brittle failures on the weld zones of the beam bottom flanges in the rigidity connection of steel special moment frames (SMFs) were detected. One of the primary reasons is the high-tensile strain demand cre...
The interfacial zone between aggregate particles and asphalt mortar presents a significant effect on the strength of an asphalt mixture. In this paper, basalt, limestone, and diabase were selected, and the influence of these aggregates on the mechani...
Urbanization has profoundly transformed land surface morphology and amplified thermal environmental modifications, culminating in intensified urban heat island (UHI) phenomena. Local climate zones (LCZs) provide a robust methodological framework for...
The study deals with the characterization of the relationship between the microstructure of the reaction zone and the mechanical properties in the brazed joints of aluminum alloy 3003 and stainless steel AISI 304 in order to determine the influence o...
To better protect the ecological environment during large scale underground coal mining operations in the northwest of China, the authors have proposed a water-conservation coal mining (WCCM) method. This case study demonstrated the successful applic...
11 May 2022
The hyporheic zone (HZ) plays an important role in the river ecosystem, and hyporheic exchange and solute transport in the HZ are important ecological functions. However, the relationship between the design parameters of river structure and solute tr...
The South Atlantic convergence zone (SACZ) is the main summer-typical atmospheric phenomenon occurring in South America, and it is of great interest because it regulates the rainy season in the most populated regions of Brazil. Frequency variability,...
The presented article concentrates on the influence of various concrete additives in the form of fibers on the mechanical parameters of concrete so as to obtain the effect of gradual changes in these parameters, which is very important in the transit...
Understanding the groundwater movement patterns and regulating functions of the karst vadose zone is essential in addressing water scarcity and protecting the ecological environment in the karst area of southwest China. A laboratory-scale experimenta...
The damage of overlying strata and ground surface caused by the one-time mining space is relatively severe in steeply inclined extra-thick coal seams. The unique law of surface subsidence at these conditions is still missing. Taking Huating Dongxia C...
To investigate the distribution of coal seam stress ahead of the working face under hard-roof conditions and analyze its impact on gas flow, this study focused on the 16,021 working face in Wu Hua No. 1 Mine. First, we established a mining model usin...
Modeling metal matrix composites in finite element software requires incorporating a cohesive zone model (CZM) to represent the interface between the constituent materials. The CZM determines the behavior of traction–separation (T–S) in t...
In situ uniaxial compressive strength mapping across dykes of different thicknesses within a coal mass and its influence zones at two mines in the Jharia coalfield has been carried out in this study. It provides insight into the manner in which the d...
This paper presents the results of a numerical FEM (Finite Element Method) simulation of the formation of a rock failure zone in its initial stage of development. The influence of rock parameters, such as the Young’s modulus, Poisson’s ratio and fric...
Microplastics (MPs) are widely distributed in the environment. MP pollution has been found in the environment globally, which directly threatens human health. It is of great importance to study the influencing factors and mechanism of MP migration in...
In the seismic design of steel moment-resisting frames (MRFs), the panel zone region can significantly affect overall ductility and energy-dissipation capacity. This study investigates the influence of panel zone flexibility on the seismic response o...
Problems concerning the influence of the geometric parameters of an undercutting anchor on the range of the failure zone of rock medium during the pulling out of the anchor constitute one of the aspects that arouse the interest of authors due to atte...
China has identified the synergistic reduction of pollution and carbon emissions as a crit ical component of its environmental protection and climate mitigation efforts. An assessment of this synergy can provide clarity on the strategic management of...
The evolution of wind waves in coastal zones leads to changes in the shape of the wave spectrum. Along the coast of Kerala, due to the presence of mudbanks during the southwest monsoon, we could observe downshifting of the peak frequency in the wave...
The Cascade Reservoir System (CRS) in the upper Yellow River delivers integrated benefits (flood control, water supply, hydro-power generation, and ecological regulation), but it also alters the natural runoff regime and exerts non-negligible impacts...
Ecosystem valuation (EV) of soil resources is essential for understanding changes in environmental services in monetary terms. A lack of this information, which includes economic indices, hinders the optimal management of natural resources. This stud...
The influence of centerline segregation on the low-temperature impact toughness of the heat-affected zone (HAZ) of welded joints was studied by welding experiments on X70 steel plates rolled from continuous casting slabs with segregation grades of cl...
Winning the battle against pollution and strengthening ecological protection in all respects are vital for promoting green development and building a moderately prosperous ecological civilization in China. Using the entropy weight method, this paper...
Coastal zones, despite their contribution to global economies, continue to suffer the negative impacts of climate variability, which limit the livelihoods of people, particularly small-scale fishermen. This study examined climate variability, coastal...
Total factor productivity (TFP) serves as a crucial indicator of high-quality development, showcasing a region’s utilization of technological advancements and innovative strategies to enhance production efficiency. With China’s regions ex...
The ore-free zone in the center of the blast furnace throat is a major feature of the charging system, ensuring the permeability of the center. Factors that influence the formation of the ore-free zone need to be researched to increase the control pr...
The component method for aluminium joints has been recently introduced in some codes and guidelines. Nevertheless, it is still in need of some development and improvement, as in some cases it was obtained by adapting the existing formulations that ar...
Nano-SiO2 (NS) is widely used in cement-based materials due to its excellent physical properties. To study the influence of NS content on a cement paste and the interfacial transition zone (ITZ), cement paste samples containing nano content ranging f...
The issue of agricultural non-point source pollution has attracted global attention. A buffer zone is an effective, eco-friendly, and economically feasible remediation ecosystem to reduce the impact of agricultural non-point source pollution on water...
Based on the Rigid Plastic Finite Element Method (RPFEM), this study investigates the performance of the footing on the soil with a cavity. The RPFEM is used in plane strain conditions and necessitates only a few materials to predict the bearing capa...
As the rock fracture in the roof anchorage blind zone of coal roadway develops, it not only brings about serious deformation, but also results in barrier effect on anchorage stress, restricting the efficiency of the bolt support. In this paper, the e...
The creep mechanical behavior of the slip zone soil is distinctive and assumes a vital role in the identification and prediction of landslide evolution, but the rock content and structure dictate its creep properties. This study examines the Outang l...
The wetting and nonwetting fluid saturations in porous reservoirs always change during long-term injection and production. The fracture process zone (FPZ) is a prominent feature in the rock fracture process. If the FPZ properties are influenced by po...
In Australia, water resource management is a major environmental, biological, and socio-economic issue, and will be an essential component of future development. The Hawker Area of the central Flinders Ranges, South Australia suffers from a lack of r...
Eurocode 3 establishes the component method to analytically characterize the structural joints between beam and columns. When one of the members involved in the joint is a hollow section (i.e., a tube) there is a lack of information for the specific...
of 178