We present a solid-state synthesis of ferromagnetic lithium niobate nanoparticles (LiNbO3) and their corresponding structural aspects. In order to investigate the effect of heat treatments, two batches of samples with a heat-treated (HT) and non-heat...
24 September 2015
We report on the results of investigating the ferromagnetic properties of bare Cu nanoparticles. Three sets of bare Cu nanoparticle assemblies with mean particle diameters of 6.6, 8.1, and 11.1 nm were fabricated, employing the gas condensation metho...
Polystyrene-coated cobalt nanoparticles (NPs) were synthesized through a dual-stage thermolysis of cobalt carbonyl (Co2(CO)8). The amine end-functionalized polystyrene surfactants with varying molecular weight were prepared via atom-transfer radical...
We demonstrated resonance-based detection of magnetic nanoparticles employing novel designs based upon planar (on-chip) microresonators that may serve as alternatives to conventional magnetoresistive magnetic nanoparticle detectors. We detected 130 n...
The capture of magnetic nanoparticles (MNPs) is essential in the separation and detection of MNPs for applications such as magnetic biosensing. The sensitivity of magnetic biosensors inherently depends upon the distribution of captured MNPs within th...
Nickel-doped cerium dioxide nanoparticles exhibit room temperature ferromagnetism due to high oxygen mobility within the doped CeO2 lattice. CeO2 is an excellent doping matrix as it can lose oxygen whilst retaining its structure. This leads to increa...
This work demonstrates the synthesis of ferromagnetic metallic cobalt nanoparticles embedded in a graphene framework through a graphene-assisted carbothermal reduction process. Cobalt oxide (Co3O4) was employed as the starting material, with graphene...
Horizontally shifted and asymmetric hysteresis loops are often associated with exchange-biased samples, consisting of a ferromagnet exchange-coupled with an antiferromagnet. In purely ferromagnetic samples, such effects can occur due to undetected mi...
Horizontally shifted and asymmetric hysteresis loops are often associated with exchange-biased samples, consisting of a ferromagnet exchange coupled with an antiferromagnet. In purely ferromagnetic samples, such effects can occur due to undetected mi...
This article sums up and compares the most important techniques for magnetic sensing of ferromagnetic nanoparticles. In addition, the most well-known magnetic sensing instruments are presented, while the advantages and disadvantages of each instrumen...
A novel endeavor based on the synthesis, characterization and study of a hybrid crystalline magnetic nanostructured material composed of bimetallic iron–rhodium nanoalloys, grown on nanodiamond nanotemplates, is reported in this study. The deve...
The agglomeration of ferromagnetic nanoparticles in a fluid is studied using nanoparticle-level Langevin dynamics simulations. The simulations have interdigitation and bridging between ligand coatings included using a computationally-cheap, phenomeno...
This work raises the hypothesis that it is possible to use ferromagnetic carbon nanotubes filled with iron to hyperthermally destroy cancer cells in a radiofrequency electromagnetic field. This paper describes the synthesis process of iron-filled mul...
With allowance for orientational Brownian motion, the magnetorelaxometry (MRX) signal, i.e., the decay of magnetization generated by an ensemble of ferromagnet nanoparticles, each of which bears a macromolecular corona (a loose layer of polymer gel)...
Magnetic properties of ferromagnetic nanostructures were studied by atomistic simulations following Monte Carlo and Landau–Lifshitz–Gilbert approaches. First, we investigated the influence of particle size and shape on the temperature dependence of m...
Polarized Small-Angle Neutron Scattering is a versatile low-energy neutron scattering technique that allows for the access of magnetic information on nanosize objects of size 2–100 nm, from individual properties like the magnetization distribut...
The use of nanoparticles (NPs) in industrial applications is consistently increasing given their peculiar properties compared to bulk precursor materials. As a result, there is a growing need to develop alternative technical strategies for the synthe...
Aggregation of magnetic nanoparticles immobilized in polymer gels was studied by ferromagnetic resonance and paramagnetic sensor techniques. Ferromagnetic resonance spectra of magnetic gels prepared in the presence of external magnetic field of 1.5 k...
In the present work, we synthesized CoxZn1-xFe2O4 spinel ferrite nanoparticles (x= 0, 0.1, 0.2, 0.3 and 0.4) via the precipitation and hydrothermal-joint method. Structural parameters were cross-verified using X-ray powder diffraction (XRPD) and elec...
In this study, the structural and magnetic properties of a series of functionalized Co100−xNix (x = 20, 30, 40, 50, 60, 80, 85) nanoparticles (NPs) were analyzed with the objective of attaining a high specific absorption rate (SAR). The magneti...
The purpose of this study was to use agar as a multifunctional encapsulating material to allow drug and ferromagnetism to be jointly delivered in one nanoparticle. We successfully encapsulated both Fe3O4 and doxorubicin (DOX) with agar as the drug ca...
Mechanical jamming of nanoparticles at liquid–liquid interfaces has evolved into a versatile approach to structure liquids with solid-state properties. Ferromagnetic liquids obtain their physical and magnetic properties, including a remanent ma...
In this work, we report on the endotaxial growth of α-Fe nanoparticles in the near-surface layer under high-fluence iron ion implantation of the single-crystal magnesium oxide substrate. Comprehensive Mössbauer effect and magnetometry stud...
The material with a high Curie temperature of cobalt-doped zinc oxide embedded with silver-nanoparticle thin films was studied by electron magnetic resonance. The nanoparticles were synthesized by the homogeneous nucleation technique. Thin films were...
Stem-cell-based therapies rely on the transplantation of stem cells or stem-cell-derived organotypic cells into injured tissues in order to improve or restore tissue function that has been impaired by various diseases. The potential of induced plurip...
Magnetic nanoparticles embedded into semiconductors have current perspectives for use in semiconducting spintronics. In this work, 40 keV Fe+ ions were implanted in high fluences of (0.5 ÷ 1.5) × 1017 ion/cm2 into an oxide semiconductor...
FePt nanoparticles (NPs) were assembled on aluminum oxide substrates, and their ferromagnetic properties were studied before and after thermal annealing. For the first time, phosph(on)ates were used as an adsorbate to form self-assembled monolayers (...
The study of structural morphology and the optical properties of nanoparticles produced by combustion methods are gaining significance due to their multifold applications. In this regard, in the present work, the strontium-doped cobalt aluminate nano...
Increasing the biocompatibility, cellular uptake, and magnetic heating performance of ferromagnetic iron-oxide magnetic nanoparticles (F-MNPs) is clearly required to efficiently induce apoptosis of cancer cells by magnetic hyperthermia (MH). Thus, F-...
The influence of size and doping effects on the magnetization M, phonon
Magnetic nanoparticles of NiFe2O4 were successfully prepared by utilizing the sol–gel techniques. The prepared samples were investigated through various techniques such as X-ray diffraction (XRD), transmission electron microscopy (TEM), dielect...
In this report, we discuss the preparation of undoped and (Fe,Co) co-doped ZnO nanocomposites via an ultrasonicated probe, which were both under UV irradiation for 12 h and annealed at 400 °C for four hours in ambient air. Here, we investigated t...
The present work reports the synthesis of a stable aqueous magnetic fluid (AMF) by dispersing double-surfactant-coated Fe3O4 magnetic nanoparticles (MNPs) in water using a facile ambient scalable wet chemical route. MNPs do not disperse well in water...
This study introduces a novel magnetic nanohybrid material consisting of ferromagnetic (FM) bcc Fe–Co nanoparticles (NPs) grown on nanodiamond (ND) nanotemplates. A combination of wet chemistry, which produces chemical precursors and their subs...
We report on the effects of annealing on the martensitic phase transformation in the Ni-based Heusler system: Mn50Ni40Sn10 and Mn50Ni41Sn9 powder and Co50Ni21Ga32 nanoparticles. For the powdered Mn50Ni40Sn10 and Mn50Ni41Sn9 alloys, structural and mag...
In this work, the synthesis and characterization of core/shell nanoparticles of iron carbide@iron oxide (Fe3C/γ-Fe2O3) encapsulated into micelles of sodium dodecylsulfate and oleic acid and stabilized with chitosan was developed. The materials...
The combination of magnetic and semiconducting properties in one material system has great potential for integration of emerging spintronics with conventional semiconductor technology. One standard route for the synthesis of magnetic semiconductors i...
Porous InP templates possessing a thickness of up to 100 µm and uniformly distributed porosity were prepared by anodic etching of InP substrates exhibiting different electrical conductivities, involving an environmentally friendly electrolyte....
In this work, the exploitation of the synthesized magnesium oxide nanoparticles and MgO-bentonite nanocomposite as an effective photocatalyst has been reported. They were utilized to study their applicability for the photocatalytic degradation of cry...
The applications of ferrimagnetic nanoparticles (F-MNPs) in magnetic hyperthermia (MH) are restricted by their stabilization in microscale aggregates due to magnetostatic interactions significantly reducing their heating performances. Coating the F-M...
Carbon-encapsulated iron nanoparticles (Fe@C) with a mean diameter of 15 nm have been synthesized using evaporation–condensation flow–levitation method by the direct iron-carbon gas-phase reaction at high temperatures. Further, Fe@C were...
Air pollution plays a key role in sleep disorders and neurodegeneration. Alzheimer’s disease (AD), Parkinson’s disease (PD), and/or transactive response DNA-binding protein TDP-43 neuropathology have been documented in children and young...
The idea of remote magnetic guiding is developed from the underlying physics of a concept that allows for bijective force generation over the inner volume of magnet systems. This concept can equally be implemented by electro- or permanent magnets. He...
The effect of sintering temperature on the structural, magnetic, and dielectric properties of NiCr2O4 ceramics was investigated. A powder X-ray analysis indicates that the prepared nanocrystallites effectively inhibit the cooperative Jahn–Telle...
The NANO4WAVES project has demonstrated the potential of a clever organization of nanoscale inclusions in polymer matrices or inks, e.g., carbon nanotubes, graphene, metallic nanoparticles, for controlling the electromagnetic propagation at wavelengt...
Carbon-based nanocomposites coated with iron oxides were synthesized using a wet impregnation method with thermally annealed coal and an iron nitrate precursor. The influence of the thermal treatment atmosphere (air, vacuum, or nitrogen) on the morph...
This review article aims to provide a comprehensive overview of recent FMR studies on magnetic oxide nanoparticles and their potential applications. The use of the FMR technique is a powerful tool to study the magnetic properties of magnetic nanopart...
In recent years, multifunctional composite nanoparticles have garnered substantial attention across multiple fields, from medicine to environmental science and the food industry, owing to their superior physicochemical properties. The synching of Ni...
The wear debris in hydraulic oil or lubricating oil has a wealth of equipment operating information, which is an important basis for large mechanical equipment detection and fault diagnosis. Based on traditional inductive oil detection technology, ma...
Photo-modulated magnetism has become an emerging method for technological applications, such as magneto-optical devices. In this work, by introducing oxygen during rapid thermal annealing, NiFe/NiFe2O4 core/shell nanoparticles were successfully fabri...
of 5