Skip to Content

64 Results Found

  • Article
  • Open Access
13 Citations
3,202 Views
21 Pages

Enhanced Blast Response Simulation of LG Panels Using an Elasto-Damage Model with the Finite Element Method

  • Ahmed Elbelbisi,
  • Alaa Elsisi,
  • Mohammed H. Saffarini,
  • Hani Salim and
  • Zhen Chen

5 December 2023

Laminated glass (LG) windows significantly enhance building safety due to their ability to retain shattered glass within the interlayer, but their susceptibility to failure under blast loading remains a concern. Compared with simplified models, detai...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
12 Citations
2,315 Views
19 Pages

The main objective of this paper is to propose a new boundary element method (BEM) modeling for stress sensitivity of nonlocal thermo-elasto-plastic damage problems. The numerical solution of the heat conduction equation subjected to a non-local cond...

(This article belongs to the Topic Advances in Computational Materials Sciences)
  • Article
  • Open Access
50 Views
34 Pages

The failure of ice-lens-containing frozen soil typically propagates along the interface between frozen soil and ice, and the mechanical behavior of this interface plays a controlling role in the overall stability of frozen soil. In this study, low-te...

  • Article
  • Open Access
1 Citations
1,259 Views
31 Pages

12 September 2025

To elucidate the multi-performance evolution mechanisms of basalt fiber-reinforced lightweight expanded polystyrene geopolymer concrete (LEGC), a two-tiered investigation was conducted. In the first part, a series of LEGC mixtures with varying volume...

(This article belongs to the Special Issue Fiber-Reinforced Polymer Composites: Progress and Prospects)
  • Article
  • Open Access
23 Citations
3,191 Views
15 Pages

9 November 2021

For many rock engineering projects, the stress of surrounding rocks is constantly increasing and decreasing during excavating progress and the long-term operation stage. Herein, the triaxial creep behavior of dolomitic limestone subjected to cyclic i...

(This article belongs to the Special Issue Advances in Rock Mechanics and Geotechnical Engineering)
  • Article
  • Open Access
16 Citations
2,164 Views
17 Pages

A State-Dependent Elasto-Plastic Model for Hydrate-Bearing Cemented Sand Considering Damage and Cementation Effects

  • Huidong Tong,
  • Youliang Chen,
  • Xi Du,
  • Siyu Chen and ,
  • Yungui Pan,
  • Suran Wang,
  • Bin Peng,
  • Rafig Azzam and
  • Tomas Manuel Fernandez-Steeger
  • + 4 authors+ 0 author

20 February 2024

In order to optimize the efficiency and safety of gas hydrate extraction, it is essential to develop a credible constitutive model for sands containing hydrates. A model incorporating both cementation and damage was constructed to describe the behavi...

(This article belongs to the Special Issue Modeling and Analysis of Damage and Failure of Concrete-Like, Brittle and Quasi-Brittle Materials (Second Edition))
  • Article
  • Open Access
2 Citations
2,452 Views
13 Pages

13 October 2020

The impulse response of a rolling bearing and its principal component, the elasto-hydrodynamic lubrication film (EHDL), are analysed. When measuring the vibrations of bearings, we observed that the impulse response was mostly caused by defects (fatig...

  • Article
  • Open Access
10 Citations
2,842 Views
20 Pages

27 August 2020

In this paper, the feasibility study to develop strain-based seismic design criteria applicable for the components of nuclear power plants are carried out as an alternative rule to the current stress-based criteria. To do this, two acceptance criteri...

  • Article
  • Open Access
2 Citations
2,790 Views
27 Pages

Fibre-reinforced polymers based on natural fibers, such as flax fibers, exhibit pronounced nonlinear orthotropic material behavior. This presents a significant challenge in finite element analysis (FEA) simulations, as the nonlinear constitutive mode...

(This article belongs to the Special Issue Finite Element Simulation and Analysis)
  • Article
  • Open Access
12 Citations
3,910 Views
13 Pages

11 August 2020

Republic of Korea (ROK) military installations are scattered across South Korea, but there is a higher concentration of fortifications in the demilitarized zone (DMZ) and eastern and western coastlines. These facilities range from relatively small st...

(This article belongs to the Special Issue Technology and Management for Sustainable Buildings and Infrastructures)
  • Article
  • Open Access
1 Citations
2,214 Views
21 Pages

Development of Natural Rubber-Based Elasto Ball as an Alternative Material to Substitute Pumice in the Garment Washing Process

  • Maya Komalasari,
  • Onny Aulia Rachman,
  • Husaini Ardy,
  • Lia A. T. W. Asri and
  • Yati Mardiyati

13 October 2025

Distressed fabric is a popular fashion trend that adds a distinct visual appeal to garments. Distressing involves acid washing with pumice stones containing potassium permanganate. This approach is inappropriate for knitted textiles, which can genera...

  • Article
  • Open Access
3 Citations
1,377 Views
26 Pages

27 May 2025

The paper introduces a user material for Abaqus, detailing the modeling of elasto-viscoplasticity under diverse thermomechanical conditions. Converting constitutive equations into a robust code requires extensive efforts to solve numerous crucial num...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
6 Citations
1,989 Views
25 Pages

16 September 2021

With the rapid development of society, the number of hydropower projects has increased. During the construction of these projects, due to excavation-induced unloading, the high sidewalls of the hydropower station are often subject to splitting failur...

  • Article
  • Open Access
2,073 Views
23 Pages

Fatigue Load Analysis of Yawed Wind Turbines Considering Geometric Nonlinearity of Blades

  • Dereje Haile Hirgeto,
  • Guo-Wei Qian,
  • Xuan-Yi Zhou and
  • Wei Wang

6 October 2025

Fatigue damage of yawed wind turbine components can be caused by repeated long-term unsteady asymmetric inflow loads across the rotor swept area, necessitating fatigue load analysis to ensure the in-operation safety of wind turbines. This study inves...

(This article belongs to the Special Issue New Trends in Wind Energy and Wind Turbines)
  • Article
  • Open Access
2 Citations
2,771 Views
19 Pages

24 March 2023

This work introduces elasto-plastic analysis of prestressed reinforced concrete beams under different prestressing conditions by limiting the residual plastic behaviour inside the steel bars using complementary strain energy. A non-linear optimal met...

(This article belongs to the Section Sustainable Engineering and Science)
  • Article
  • Open Access
30 Citations
3,961 Views
11 Pages

15 March 2019

Floating offshore renewable energies (OREs), such as offshore floating wind turbines (wind energy) or wave power (wave and wave energy), are increasingly in demand. Submarine cables that transmit the energy produced from offshore farms all the way to...

  • Article
  • Open Access
13 Citations
1,891 Views
15 Pages

Reinforcement of RC Two-Way Slabs with CFRP Laminates: Plastic Limit Method for Carbon Emissions and Deformation Control

  • Zahraa Saleem Sharhan,
  • Raffaele Cucuzza,
  • Marco Domaneschi,
  • Oveys Ghodousian and
  • Majid Movahedi Rad

2 December 2024

Carbon-fiber-reinforced polymer (CFRP) laminates have gained attention for their potential to reduce carbon emissions in construction. The impact of carbon-fiber-reinforced polymer (CFRP Laminate) on carbon emissions and the influence of elasto-plast...

(This article belongs to the Section Building Structures)
  • Feature Paper
  • Article
  • Open Access
12 Citations
4,742 Views
21 Pages

Influence of Thermal Shocks on Residual Static Strength, Impact Strength and Elasticity of Polymer-Composite Materials Used in Firefighting Helmets

  • Daniel Pieniak,
  • Agata Walczak,
  • Marcin Oszust,
  • Krzysztof Przystupa and ,
  • Renata Kamocka-Bronisz,
  • Robert Piec,
  • Grzegorz Dzień,
  • Jarosław Selech and
  • Dariusz Ulbrich
  • + 4 authors+ 0 author

22 December 2021

The article presents results of experimental studies on mechanical properties of the polymer-composite material used in manufacturing firefighting helmets. Conducted studies included static and impact strength tests, as well as a shock absorption tes...

(This article belongs to the Special Issue Computational and Experimental Mechanics of Engineering Materials and Structures)
  • Article
  • Open Access
17 Citations
4,721 Views
22 Pages

18 July 2019

The purpose of the work was to propose analytical model considering double confinements (provided by both transverse reinforcements and a wide flange steel section), which was verified by the nonlinear finite element analysis considering concrete-dam...

(This article belongs to the Special Issue Deformation, Fatigue and Fracture of Materials)
  • Article
  • Open Access
16 Citations
4,767 Views
6 Pages

Computer Modelling of Hafnium Doping in Lithium Niobate

  • Romel M. Araujo,
  • Mario E. G. Valerio and
  • Robert A. Jackson

6 March 2018

Lithium niobate (LiNbO3) is an important technological material with good electro-optic, acousto-optic, elasto-optic, piezoelectric and nonlinear properties. Doping LiNbO3 with hafnium (Hf) has been shown to improve the resistance of the material to...

(This article belongs to the Special Issue Lithium Niobate: Bulk Crystals, Composites, Thin Films and Nanocrystals)
  • Article
  • Open Access
9 Citations
3,015 Views
23 Pages

19 March 2023

Using a preform fabricated by a cold forward extrusion process, the present study numerically predicted and experimentally investigated its residual stress and microstructural characteristics, as well as its plastic deformation damage and hardness. P...

(This article belongs to the Special Issue Advances in Manufacturing Technology of Metal/Composite Hybrid Structures)
  • Article
  • Open Access
13 Citations
3,461 Views
22 Pages

Microstructural Influences on Fracture at Prior Austenite Grain Boundaries in Dual-Phase Steels

  • Luv Sharma,
  • Ron H. J. Peerlings,
  • Marc G. D. Geers and
  • Franz Roters

8 November 2019

Dual phase (DP) steels provide good strength and ductility properties. Nevertheless, their forming capability is limited due to the damage characteristics of their constituting microstructural phases and interfaces. In this work, a specific type of i...

(This article belongs to the Special Issue Micromechanics: Experiment, Modeling and Theory)
  • Article
  • Open Access
21 Citations
5,558 Views
19 Pages

Close Range Explosive Loading on Steel Column in the Framework of Anisotropic Viscoplasticity

  • Piotr Witold Sielicki,
  • Wojciech Sumelka and
  • Tomasz Łodygowski

17 April 2019

The research was based on data obtained from experimental studies and aims in the challenge of mapping these results by a mathematical (phenomenological) model. The field experiments were performed on an H-section steel column supported by a reinforc...

(This article belongs to the Special Issue Metallic Materials under Dynamic Loading)
  • Article
  • Open Access
9 Citations
2,867 Views
17 Pages

6 February 2023

Foam metal/epoxy interpenetrating phase composite is a new type of composite material with interpenetrating continuity in composition, which exhibits different intrinsic relationships under different stress states in tension and compression, and it i...

(This article belongs to the Special Issue Multiscale Modeling and Simulation of Polymer-Based Composites)
  • Article
  • Open Access
9 Citations
2,719 Views
17 Pages

Strain-Field Modifications in the Surroundings of Impact Damage of Carbon/Epoxy Laminate

  • Jarmil Vlach,
  • Radek Doubrava,
  • Roman Růžek,
  • Jan Raška and ,
  • Jan Horňas and
  • Martin Kadlec
  • + 1 author+ 0 author

9 August 2022

The relationship between deformation and stress is crucial for any elasto-plastic body. This paper deals with the experimental identification of the basic parameters of the composite laminate model in relation to the finite element model. Standardize...

(This article belongs to the Special Issue Fiber Reinforced Polymer Materials)
  • Article
  • Open Access
22 Citations
3,069 Views
14 Pages

Revisiting Classical Issues of Fatigue Crack Growth Using a Non-Linear Approach

  • Micael F. Borges,
  • Diogo M. Neto and
  • Fernando V. Antunes

4 December 2020

Fatigue crack growth (FCG) has been studied for decades; however, several aspects are still objects of controversy. The objective here is to discuss different issues, using a numerical approach based on crack tip plastic strain, assuming that FCG is...

(This article belongs to the Special Issue Fatigue Crack Growth in Metallic Materials)
  • Article
  • Open Access
4 Citations
2,814 Views
15 Pages

23 January 2021

The application of the elasto-plastic material model known as the Barcelona Model (BM) for numerical assessment of a historical vault subjected to earthquake sequence is presented in this work. As a case study, part of a masonry vault erected in Sout...

(This article belongs to the Special Issue Nondestructive Testing (NDT): Volume II)
  • Article
  • Open Access
1 Citations
923 Views
17 Pages

Perforation and Loading Parametric Effects on Dynamic Rock Deformation and Damage Behaviors During Initial Fracturing Stages in Tight Reservoirs

  • Bo Chen,
  • Abulimiti Aibaibu,
  • Yuan Liu,
  • Xinwei Guo and ,
  • Hua Zhou,
  • Xuyang Guo,
  • Bolong Zhu and
  • Xiangyun Zhao
  • + 3 authors+ 0 author

14 April 2025

Hydraulic fracturing technologies introduce deformation, damage, and fractures into tight oil reservoirs, which facilitates the production of hydrocarbons for the economic development of such fields. In addition to typical plug-and-perf fracturing te...

(This article belongs to the Section H: Geo-Energy)
  • Article
  • Open Access
2,602 Views
21 Pages

29 July 2021

The effect of different constitutive modelling choices is crucial under a high strain rate as encountered in ballistic applications. Natural fragmentation of explosively driven cylinder rings is chosen as a simplified example to describe the ability...

(This article belongs to the Special Issue Materials Dedicated for Armours and Protection Systems)
  • Article
  • Open Access
6 Citations
2,864 Views
17 Pages

17 April 2024

Metal parts undergo a blanking test that involves experimentation with different process parameters across multiple levels. The presence of uncontrolled burrs (measured as Hbv) significantly affects the precise geometry of the blanked parts, making i...

(This article belongs to the Special Issue Advanced Mathematical Modeling and Numerical Solutions in Applied Mechanics and Engineering, 2nd Edition)
  • Article
  • Open Access
1 Citations
1,973 Views
13 Pages

Bending Properties of Finger-Jointed Bamboo Scrimber Composite Beams

  • Chengjian Huang,
  • Yongjie Bao,
  • Neng Li and
  • Yi Shu

29 November 2024

The finger-joint technique is an effective and economical method for producing bamboo scrimber composites for structural engineering and construction applications. This study investigates the failure modes and mechanical strength of finger-jointed ba...

(This article belongs to the Special Issue Advances in Technology and Solutions for Wood Processing)
  • Article
  • Open Access
6 Citations
3,777 Views
20 Pages

Variable Thickness in Plates—A Solution for SHM Based on the Topological Derivative

  • Anxo Martínez,
  • Alfredo Güemes,
  • Jose M. Perales and
  • Jose M. Vega

29 April 2020

The topological derivative tool is applied here in structural health monitoring (SHM) problems to locate small defects in a material plate with complex geometry that is subject to permanent multifrequency guided waves excitation. Compared to more sta...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
7 Citations
3,891 Views
24 Pages

Investigation on the Seismic Performance of RC Frame Buildings with Rubber Isolation Bearing Installed in Staircases

  • Liang Bai,
  • Xingwen Liang,
  • Li Xin,
  • Mingxiao Liu and ,
  • Ziming Yu and
  • Yage Chu
  • + 1 author+ 0 author

26 February 2023

A rubber isolation bearing installed in a staircase (RBS) was proposed to mitigate seismic damages to the component of staircases and improve their seismic performance. A series of quasi-static tests performed with respect to the horizontal and verti...

(This article belongs to the Special Issue Improvement Technology on Building Seismic Toughness)
  • Article
  • Open Access
19 Citations
3,339 Views
14 Pages

The loss rate is an important index to evaluate the harvesting performance of white radish. To reduce the loss rate, it is necessary to analyze the pulling dynamic characteristics of white radish and then optimize the structure and operating paramete...

(This article belongs to the Section Agricultural Technology)
  • Article
  • Open Access
3 Citations
2,493 Views
16 Pages

This study explores a technique for enhancing the punching strength of reinforced concrete (RC) flat slabs, namely carbon fiber reinforced polymer (CFRP). Four large-scale RC flat slabs were fabricated, to assess the efficacy of this strengthening me...

(This article belongs to the Section Computational Engineering)
  • Article
  • Open Access
3 Citations
4,936 Views
16 Pages

31 October 2018

This paper aims to investigate the seismic performance of a novel type of steel–concrete hybrid supporting structure consisting of reinforced concrete (RC) tubular columns, steel solid web girder platform, and A-shaped steel frames. It is typic...

(This article belongs to the Section Acoustics and Vibrations)
  • Article
  • Open Access
29 Citations
7,129 Views
28 Pages

Micromechanical Modeling of Fatigue Crack Nucleation around Non-Metallic Inclusions in Martensitic High-Strength Steels

  • Benjamin Josef Schäfer,
  • Petra Sonnweber-Ribic,
  • Hamad ul Hassan and
  • Alexander Hartmaier

25 November 2019

Martensitic high-strength steels are prone to exhibit premature fatigue failure due to fatigue crack nucleation at non-metallic inclusions and other microstructural defects. This study investigates the fatigue crack nucleation behavior of the martens...

(This article belongs to the Special Issue Fatigue Design and Defects in Metals and Alloys)
  • Article
  • Open Access
5 Citations
2,192 Views
18 Pages

22 August 2023

Creep is a fundamental property that naturally exists in some types of rock, which is significant for the long-term stability of roadways during the mining process. In this paper, the long-term strength of coal and rock were determined via laboratory...

(This article belongs to the Collection Sustainable Development of Coal Based Energy: Technology, Environment, Humanities, Economy, and Education)
  • Article
  • Open Access
1 Citations
3,082 Views
20 Pages

Thermomechanical Analysis of PBF-LB/M AlSi7Mg0.6 with Respect to Rate-Dependent Material Behaviour and Damage Effects

  • Lukas Richter,
  • Irina Smolina,
  • Andrzej Pawlak,
  • Daniela Schob and ,
  • Robert Roszak,
  • Philipp Maasch and
  • Matthias Ziegenhorn
  • + 2 authors+ 0 author

9 August 2024

This paper describes the self-heating effects resulting from mechanical deformation in the additively manufactured aluminium alloy AlSi7Mg0.6. The material’s self-heating effect results from irreversible changes in the material’s microstr...

(This article belongs to the Special Issue Applied Thermodynamics: Modern Developments (2nd Volume))
  • Article
  • Open Access
3 Citations
3,125 Views
23 Pages

24 January 2024

An isolation layer composed of isolators and steel dampers in base-isolated tall buildings can dissipate wind-induced energy via repeated elasto-plastic deformation. Its energy dissipation can be used to estimate its wind-induced responses and the fa...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
2 Citations
4,441 Views
14 Pages

Blunt Notch Strength of AA2024 3-3/2-0.4 Fibre Metal Laminate Under Biaxial Tensile Loading

  • Julian Schwinn,
  • Eric Breitbarth,
  • Thomas Beumler and
  • Guillermo Requena

5 April 2019

Fibre metal laminates are utilized in lightweight structures, such as aircraft fuselages, as fibre metal laminates provide outstanding fatigue and damage tolerance capabilities, together with a reduced weight compared to monolithic metallic structure...

(This article belongs to the Special Issue Modern Aerospace Materials)
  • Article
  • Open Access
1,228 Views
18 Pages

29 August 2025

This article presents a numerical study of the influence of applied nonlinearities on the response of a flat slab–column structure under progressive collapse conditions. A key aspect of the work is the extension of nonlinear static analysis by...

(This article belongs to the Section Construction and Building Materials)
  • Review
  • Open Access
827 Views
36 Pages

Plastic design enables efficient structural systems by exploiting controlled inelastic deformation and force redistribution. While mature in steel structures due to stable ductility and well-defined yielding, its extension to reinforced concrete (RC)...

(This article belongs to the Special Issue Resilient and Sustainable Buildings: Advances in Architecture and Structural Systems)
  • Article
  • Open Access
10 Citations
4,112 Views
19 Pages

Impact of PP Impurities on ABS Tensile Properties: Computational Mechanical Modelling Aspects

  • Charles Signoret,
  • Anne-Sophie Caro-Bretelle,
  • José-Marie Lopez-Cuesta,
  • Patrick Ienny and
  • Didier Perrin

19 May 2021

Recycling of plastics is hindered by their important variety and strong incompatibility. However, sorting technologies bear costs and meet limits. Very high purities (<2 wt%) are difficult to reach. Yet, such rates may be detrimental to functional...

(This article belongs to the Special Issue Advances in Multifunctional Polymer-Matrix Composites)
  • Article
  • Open Access
2 Citations
2,362 Views
17 Pages

7 February 2024

Dental caries and dental restorations possess a long history and over the years, many materials and methods have been invented. In recent decades, modern techniques and materials have brought complexity to this issue, which has created the necessity...

(This article belongs to the Special Issue Structural Integrity Assessment on Polymers and Composites)
  • Article
  • Open Access
20 Citations
3,889 Views
17 Pages

11 September 2020

This paper presents the methodology for predicting the mechanical performance of structural elements made of polymer concrete (PC). A vinyl ester polymer concrete composition and the results of experimental studies to determine the basic mechanical p...

(This article belongs to the Special Issue Polymer in/on Concrete)
  • Article
  • Open Access
19 Citations
4,598 Views
21 Pages

7 November 2022

The crankshaft is one of the core components of a Rotate Vector (RV) reducer. The fatigue life of the RV reducer is severely hindered by fatigue failure on the eccentric cylindrical surface of the crankshaft. The hardness gradients and residual stres...

(This article belongs to the Special Issue Fatigue and Fracture of Metals and Alloys: Numerical and Experimental Study)
  • Article
  • Open Access
8 Citations
5,343 Views
34 Pages

Numerical Analysis of a Moderate Fire inside a Segment of a Subway Station

  • Rodrigo Díaz,
  • Hui Wang,
  • Herbert Mang,
  • Yong Yuan and
  • Bernhard Pichler

1 November 2018

A 1:4 scaled fire test of a segment of a subway station is analyzed by means of three-dimensional Finite Element simulations. The first 30 min of the test are considered to be representative of a moderate fire. Numerical sensitivity analyses are perf...

(This article belongs to the Special Issue Computational Methods for Fracture)
  • Article
  • Open Access
10 Citations
2,001 Views
16 Pages

A Fractional-Order Creep Model of Water-Immersed Coal

  • Gen Li,
  • Qiqi Wanyan,
  • Zhengsheng Li,
  • Haiyang Yi and ,
  • Fengfei Ren,
  • Zheng Chen and
  • Yang Liu
  • + 2 authors+ 0 author

29 November 2023

The long-term stability of a coal pillar dam is a serious concern for coal mine underground reservoirs because of the creep behavior of coal in complex water immersion and mechanical environments. In order to investigate the characteristics of creep...

  • Article
  • Open Access
31 Citations
4,879 Views
22 Pages

15 April 2020

The dynamic behavior of structures in liquefiable sand exhibits more complicated characteristics, due to the development of excess pore pressure caused by cyclic loading, than that in dry sand. Therefore, it is crucial to accurately predict the soil&...

(This article belongs to the Section Civil Engineering)

of 2