- Article
Lead–acid batteries are important to modern society because of their wide usage and low cost. The primary source for production of new lead–acid batteries is from recycling spent lead–acid batteries. In spent lead–acid batteri...
Lead–acid batteries are important to modern society because of their wide usage and low cost. The primary source for production of new lead–acid batteries is from recycling spent lead–acid batteries. In spent lead–acid batteri...
The article reviews selected methods and techniques of agricultural biogas desulphurization. Presented is the current state of technological and measurement systems as well as raw biogas purification methods in terms of control and measurement-socio-...
With the improvement of environmental protection requirements, more and more attention has been given to desulphurization wastewater with zero discharge in coal power plants. Atomization drying is part of the main zero discharge technologies at prese...
The use of waste incineration with energy recovery is a matured waste-to-energy (WtE) technology. Waste incineration can reduce the volume and mass of municipal solid waste significantly. However, the generation of high volumes of polluting flue gase...
Thiophenic compounds constitute a class of sulfur compounds derived by thiophene, containing at least one thiophenic ring. Their presence in fuels (crude oil, etc.) is important and can reach 3% m/m. The combustion of fuels leads to the formation of...
Road construction consumes great amounts of high-grade natural resources. Using low-grade natural rocks or some solid wastes as substitute materials is a hot topic. Considering this, the feasibility of using low-grade granite aggregate, solid waste-b...
It is essential to develop effective mine waste management approaches and mine site reclamation techniques to curtail the adverse effects of mining processes on the natural environment. This study focuses on the use of partially desulphurized tailing...
Regarding photocatalytic oxidative desulphurization (PODS), titanium oxide (TiO2) is a promising contender as a catalyst due to its photocatalytic prowess and long-term performance in desulphurization applications. This work demonstrates the effectiv...
Desulphurization of oil-based fuels is common practice to mitigate the ecological burden to ecosystems and human health of SOx emissions. In many countries, fuels for vehicles are restricted to 10 ppm sulphur. For marine fuels, low sulphur contents a...
The increase of capital investments and operation and maintenance (O&M) costs represents a current limitation to the diffusion of carbon capture systems for the clean combustion of fossil fuels. However, post-combustion systems, such as calcium l...
In view of the current status of catalytic cracking flue gas treatment, it is necessary to study the flow environment of desulfurization ash particles, which are a type of Geldart C particle, in a circulating fluidized bed (CFB) for semi-dry flue gas...
A series of thermodynamic calculations are performed for the roasting of pyrite in changing temperatures and atmospheres. The relationship between ΔrGθ and temperature in the range of T = 300–1200 K shows that, depending on the atmo...
This study investigated a low-energy-consuming procedure for the synthesis of zeolite materials from coal fly ash (CFA). Materials containing zeolite phases, namely Na–X, Na–P1, and zeolite A, were produced from F–class fly ash, using NaOH dissolved...
Sulphur dioxide (SO2) is mostly emitted from coal-fueled power plants, from waste incineration, from sulphuric acid manufacturing, from clay brick plants and from treating nonferrous metals. The emission of SO2 needs to be abated. Both wet scrubbing...
A large potential exists in the Southeast Asia region for deployment of high-efficiency, low-emission (HELE) electricity generation technologies. A cost–benefit analysis of HELE technologies compared to the less efficient subcritical electricity gene...
Separation of coal ash into magnetic and non-magnetic fractions facilitates their utilization when processed separately. Due to desulphurization additives added to coal during the fluidised-bed combustion, non-magnetic fractions often contain elevate...
A soil cover system can be viewed as a thin interface placed between the atmosphere and the underlying waste. Climate is a primary design variable in soil cover design; therefore, climate change poses a number of challenges to design, operation and l...
The efficiency of the hot metal pretreatment process plays a very important role in achieving high-quality and low-cost advanced steel. From macromixing phenomena obtained by numerical modeling and physical experiments to compound interaction databas...
The core of saline–alkali soil improvement lies in salt leaching by water and reducing alkalinity by improved materials such as acid material or desulphurized gypsum. This study conducted simulation experiments to clarify the impact of furfural...
This article uses a water model with a ratio of 1:5.75 to study the influence of factors such as the position and flow rate of top and bottom composite argon blowing on the mixing time of molten steel in a 300t ladle at a certain factory. Using engin...
Biotrickling filters’ control for H2S removal has special challenges because of complexity of the systems. Feedback and feedforward control were implemented in an anoxic biotrickling filter, operated in co-current flow mode and using nitrite as...
Experimental and theoretical studies on thermodynamic properties of quinolinium-based ionic liquids (ILs) based on bis(trifluoromethylsulfonyl)imide anion (namely N-butyl-quinoloinium bis(trifluoromethylsulfonyl)imide, [BQuin][NTf2], N-hexylquinoloin...
It is important to know the activity interaction parameters between components in melts in the process of metallurgy. However, it’s considerably difficult to measure them experimentally, relying still to a large extent on theoretical calculatio...
The increased utilization of pellets in blast furnaces is one of the directions for low-carbon ironmaking. As a result, the low slag rate may affect the desulfurization of the hot metal and the removal of alkali in the blast furnace. Effective desulf...
The purpose of this article was to present the theory of the possibility of using limestone sorbents containing carbonate minerals with increased Mg content in processes of flue gas desulfurization in power stations. Data obtained as a result of the...
Iron-based particles loaded on porous carbon materials have attracted extensive attention as catalysts for denitration and desulfurization reactions. However, the carbon support of a high-temperature denitration catalyst is inevitably oxidized in the...
Hydrogen sulphide (H2S) and volatile methylsiloxanes (VMSs) are key pollutants from the point of view of the operators of biogas plants. H2S poses corrosive hazards, while VMSs transform into difficult-to-remove deposits, reducing the availability an...
We present the comparative analysis of three Zn-based sorbents for the process of sulphur removal from hot coal gas. The sorbents were prepared by a slurry impregnation of TiO2, SiO2 and Al2O3, resulting in complex, multiphase materials, with the dom...
Semi-dry desulfurization ash (SDA) is generated in rapidly increasing quantities and remains underutilised, despite its high CaO content, which makes it a promising candidate for CO2 storage via carbonation curing. However, the carbonation behaviour...
This study investigates the synergistic effect and mechanism of gelling materials with blast furnace slag (BFS), steel slag (SS) and desulphurization gypsum (DG) as the main components on the hardening of heavy metal ions by lead and zinc tailings. I...
This paper briefly introduces various methods of coal desulfurization (physical desulphurization, chemical desulfurization, biological desulfurization, etc.) and analyzes some problems existing in each method. The principle and research process of fr...
A facile, one-pot, and proficient method was developed for the production of various 2-arylaminobenzimidazoles. This methodology is based for the first time on a copper catalyst promoted domino C–N cross-coupling reaction for the generation of...
The ambient temperature high pressure oxydesulphurisation technique was investigated to reduce the sulphur content. Prince of Wales coal was chosen for this study. The focus of the study was to investigate the reduction of both pyritic and organic su...
Molten slag has different properties depending on its composition. The relationship between its composition, structure, and properties has been the focus of attention in industrial manufacturing processes. This review describes the atomistic scale me...
The effectiveness of co-additives for improving livestock waste composting (reduction of air pollution and conservation of nutrients) was investigated. Biochar and Flue gas desulphurization gypsum (FGD gypsum) were used to supplement the composting o...
An experimental study of hydrogen sulfide adsorption on a fixed bed for biogas purification is proposed. The adsorbent investigated was powdered hematite, synthesized by a wet-chemical precipitation method and further activated with copper (II) oxide...
The large amount of biomass waste generated by vineyard pruning causes many environmental concerns. The production of briquettes represents an alternative to obtaining a value-added product. The transformation of vineyard wastes into briquettes could...
The high concentration of chloride ions in desulphurization wastewater is the primary limiting factor for its reusability. Monovalent anion selective electrodialysis (S-ED) enables the selective removal of chloride ions, thereby facilitating the reus...
In this study, the fixed water/binder ratio is 0.40, four mineral admixtures: fly ash (FA), blast furnace slag (BFS), desulphurization slag (DLS), and glass LED powder (GLP), were added to lightweight aggregate concrete (LWAC), replacing 10% or 30% o...
The paper assesses the influence of the calcination temperature of synthetic gypsum binder on the binding properties of innovative gypsum pastes, as well as on masonry and plastering mortars. The calcination process of gypsum binder was carried out a...
In this paper, an approach was employed to fabricate a curing agent using multiple solid wastes. To determine the optimal mixing ratio, orthogonal and compaction tests were initially conducted, followed by a comparative analysis of the excitation eff...
Poland is a country where the commercial power industry mainly uses coal to produce energy. As a result of energy production processes, by-products of combustion are generated, primarily fly ashes. In Poland, these are mostly obtained from convention...
Flue-gas desulphurization (FGD) gypsum is a highly prevalent industrial by-product worldwide, which can be an excellent alternative to natural gypsum due to its high content of CaSO4·2H2O. The preparation of α-calcium sulfate hemihydrate...
Heavy metals in flue gas desulfurization (FGD) gypsum from coal-fired power plants are at risk of releaching during the processes of stockpiling and resource utilization. In this study, the effects of organosulfur chelators dithiocarbamate (DTC) and...
Mineral carbonation, involving reactions of alkaline earth oxides with CO2, has received great attention, as a potential carbon dioxide sequestration technology. Indeed, once converted into mineral carbonate, CO2 can be permanently stored in an inert...
The advanced tendencies in building materials development are related to the design of cement composites with a reduced amount of Portland cement, contributing to reduced CO2 emissions, sustainable development of used non-renewal raw materials, and d...
The pressure swing adsorption (PSA) process was used to capture carbon dioxide (CO2) from the flue gas of a coal-fired power plant to reduce CO2 emissions. Herein, CO2 was captured from flue gas using the PSA process for at least 85 vol% CO2 purity a...
The growing increase in the production of municipal solid waste incinerator (MSWI) ashes has led to the research of new possibilities to reuse these by-products. This work aims to use MSW fly ash (FA) as a flame retardant filler. The FA was stabilize...
The purpose of this research is to assess the yield and reaction rate potential of carbon dioxide (CO2) sequestration through mineralisation using readily available and inexpensive resources by exploiting waste materials. In this case, a blend of fou...
Fly ash is the main waste as a result of combustion in coal fired power plants. It represents about 40% of the wastes of coal combustion products (fly ash, boiler ash, flue gas desulphurization gypsum and bottom ash). Currently, coal waste is not ful...
of 2