Skip to Content

62 Results Found

  • Article
  • Open Access
12 Citations
4,702 Views
19 Pages

7 September 2021

The latest earthquakes in Europe exposed some critical problems in the connections of cladding panels in industrial precast reinforced concrete (PRC) structures. These connections did not perform as desired, causing the panels to fall, leading to sig...

(This article belongs to the Collection Structural Analysis for Earthquake-Resistant Design of Buildings)
  • Article
  • Open Access
3 Citations
2,532 Views
26 Pages

4 October 2023

An extensive parametric study of the seismic response of one-storey precast buildings with horizontal cladding panels frequently used in Central Europe was conducted to analyse the panels’ influence on the overall response of buildings and to f...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
9 Citations
6,325 Views
14 Pages

2 September 2020

In this paper, we present an original experimental investigation on a pull-out test of a blind rivet from the external facing of sandwich panels with various core layer materials (polyisocyanurate foam, mineral wool, and expanded polystyrene). The bl...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
2 Citations
5,270 Views
18 Pages

Study of an Integration Platform Based on an Adiabatic Active-Layer Waveguide Connection for InP Photonic Device Integration Mirroring That of Heterogeneous Integration on Silicon

  • Changming Chen,
  • Junyu Li,
  • Chunxue Wang,
  • Yingyan Huang and ,
  • Daming Zhang,
  • Zuosen Shi,
  • Zhanchen Cui,
  • Fei Yi and
  • Seng-Tiong Ho
  • + 4 authors+ 0 author

9 October 2021

In this work, a photonic device integration platform capable of integration of active-passive InP-based photonic devices without the use of material regrowth is introduced. The platform makes use of an adiabatic active-layer waveguide connection (ALW...

(This article belongs to the Special Issue Silicon Based Integrated Optics)
  • Article
  • Open Access
3 Citations
2,798 Views
14 Pages

27 January 2023

The performance of a hydraulically expanded joint between tubesheet and titanium tube was analyzed using a finite element numerical calculation. The connection strength of Q345R tubesheet and TA2-Q345R clad tubesheet was studied using a tight expansi...

(This article belongs to the Special Issue Computational Mechanics of Structures and Materials)
  • Article
  • Open Access
8 Citations
2,187 Views
14 Pages

Coupling Effect of Disconnected Pores and Grain Morphology on the Corrosion Tolerance of Laser-Clad 316L Coating

  • San-Qi Zhang,
  • Hui Dong,
  • Yan Han,
  • Long Xu and ,
  • Yu-Kun Feng and
  • Peng-Yu Li
  • + 1 author+ 0 author

27 December 2023

The corrosion resistance of 316L cladding layers was addressed via the electrochemical test, to illustrate the coupling effect of the disconnected pores and grain morphology on the corrosion tolerance of 316L cladding layers. Scanning electron micros...

  • Article
  • Open Access
12 Citations
4,459 Views
13 Pages

Modeling and Optimization of Laser Cladding Fixation Process for Optical Fiber Sensors in Harsh Environments

  • Caixia Yang,
  • Yuegang Tan,
  • Yi Liu,
  • Ping Xia and ,
  • Yinghao Cui and
  • Bo Zheng
  • + 1 author+ 0 author

27 March 2022

In order to overcome the shortcomings of the poor shear resistance of the bare optical fiber whose coating layer falls off due to harsh conditions, such as on aero-engines and the marine environment, the coaxial powder feeding laser cladding method (...

(This article belongs to the Section Environmental Sensing)
  • Article
  • Open Access
3 Citations
4,774 Views
14 Pages

Ultra-Low-Loss Hollow-Core Anti-Resonant Fiber Combining Double-Tube Nesting and a Single-Layer Anti-Resonant Wall

  • Xingtao Zhao,
  • Mu Wang,
  • Wenke Zhang,
  • Jinlong Luo and ,
  • Chang Liu,
  • Sai Liu and
  • Juncheng Li
  • + 2 authors+ 0 author

This study innovatively presents a hollow-core anti-resonant fiber integrating double-tube nesting and a single-layer anti-resonant wall. Featuring an exclusive two-layer cladding configuration along with an outer cladding circular ring, it differs s...

  • Article
  • Open Access
2 Citations
2,207 Views
21 Pages

19 July 2023

The connection between aluminum and iron alloys is of immense significance in the pursuit of lightweight industrial products. However, the Fe-Al interface’s inherent weakness restricts its widespread application. This study investigates the imp...

(This article belongs to the Special Issue Laser Cladding Coatings: Microstructure, Properties, and Applications)
  • Article
  • Open Access
1 Citations
2,453 Views
13 Pages

Investigation of the Tribological Behavior and Microstructure of Plasma-Cladded Fe–Cr–Mo–Ni–B Coating

  • Junfu Chen,
  • Fenglong Zhang,
  • Xianghui Ren,
  • Yaoshen Wu and ,
  • Shanguo Han,
  • Manxia Cai,
  • Zhenglong Li and
  • Likun Li
  • + 3 authors+ 0 author

23 September 2022

In this study, an Fe–Cr–Mo–Ni–B coating was prepared using plasma cladding on Cr5 steel substrate. The microstructure, phase evolution and tribological performance of the Fe–Cr–Mo–Ni–B coating were inve...

  • Article
  • Open Access
2 Citations
1,596 Views
18 Pages

Deposition Process and Interface Performance of Aluminum–Steel Joints Prepared Using CMT Technology

  • Jie Zhang,
  • Hao Du,
  • Xinyue Wang,
  • Yinglong Zhang and ,
  • Jipeng Zhao,
  • Penglin Zhang,
  • Jiankang Huang and
  • Ding Fan
  • + 3 authors+ 0 author

29 July 2025

The anode assembly, as a key component in the electrolytic aluminum process, is composed of steel claws and aluminum guide rods. The connection quality between the steel claws and guide rods directly affects the current conduction efficiency, energy...

  • Article
  • Open Access
6 Citations
2,902 Views
18 Pages

Polarization Effect on the Performance of On-Chip Wireless Optical Point-to-Point Links

  • Giovanna Calò,
  • Gaetano Bellanca,
  • Franco Fuschini,
  • Marina Barbiroli and ,
  • Velio Tralli and
  • Vincenzo Petruzzelli
  • + 1 author+ 0 author

27 February 2023

Optical on-chip wireless interconnection is an emerging technology that aims to overcome the communication bottleneck in computing architectures and in which multiple processing units are exploited for data-intensive applications. In this work, we pr...

(This article belongs to the Section Electrical, Electronics and Communications Engineering)
  • Article
  • Open Access
25 Citations
7,906 Views
12 Pages

In-Line Inspection Tool with Eddy Current Instrumentation for Fatigue Crack Detection

  • Cesar Camerini,
  • João Marcos Alcoforado Rebello,
  • Lucas Braga,
  • Rafael Santos and ,
  • Tomasz Chady,
  • Grzegorz Psuj and
  • Gabriela Pereira
  • + 2 authors+ 0 author

5 July 2018

Eddy current transducer with sensing coils placed orthogonally and connected in differential mode was introduced to evaluate fatigue cracks in clad pipeline circumferential welds. A dedicated embedded electronic hardware was developed to drive the tr...

(This article belongs to the Special Issue Magnetic Sensors)
  • Article
  • Open Access
139 Views
39 Pages

21 October 2026

In this paper, we investigate three classes of f-weighted direction curves, namely tangent, principal, and binormal direction curves, obtained by integrating positive smooth multiples of the corresponding Frenet vector fields of a generating Frenet c...

(This article belongs to the Special Issue Advances in Differential Geometry and Curves)
  • Article
  • Open Access
4 Citations
2,842 Views
16 Pages

Interface Microstructure and Properties of Vacuum-Hot-Rolled 55#/316L Clad Rebars

  • Zhen Li,
  • Zecheng Zhuang,
  • Xuehai Qian,
  • Yong Xiang and ,
  • Lei Zeng and
  • Jianping Tan
  • + 1 author+ 0 author

6 January 2023

The existing process for the preparation of cladded rebars is too complicated for large-scale industrial production. Therefore, this paper proposes a 55#/316L rebar preparation method based on vacuum hot rolling. The microstructure and mechanical pro...

  • Article
  • Open Access
2 Citations
1,987 Views
10 Pages

14 September 2024

We proposed a novel fiber Mach–Zehnder interferometer (FMZI) that can perform an ultrahigh extinction ratio (ER), ultracompact, and ultra-broadband interference characteristics. The FMZI structure is based on an extremely tiny hollow core fiber...

(This article belongs to the Section Nanophotonics Materials and Devices)
  • Article
  • Open Access
1,647 Views
13 Pages

Numerical Study on Mechanical Characteristics of Tower Sections with Main Member Disconnection

  • Hengwei Zheng,
  • Changli Wu,
  • Jinhong Liu,
  • Lang Zhong and ,
  • Kai Li and
  • Zhitao Yan
  • + 1 author+ 0 author

21 September 2024

Restricted by the existing construction technology, there are a lot of disconnections in the angle steel components of transmission towers. At present, there are more studies on single angle steel or cross bracing, but less on the main member contain...

(This article belongs to the Special Issue Building Foundation Analysis: Soil–Structure Interaction)
  • Article
  • Open Access
4 Citations
2,862 Views
21 Pages

25 November 2022

This paper presents a new type of connector which is used in prefabricated structures for attaching the autoclaved lightweight concrete panels to the steel frame. The new type of connector is composed of an L-node plate and a Z-node plate and is term...

(This article belongs to the Special Issue Advancements in Prefabricated Construction: Materials, Structures, Construction, and Management)
  • Article
  • Open Access
14 Citations
5,774 Views
18 Pages

2 December 2021

Façades—their design, aesthetics, performance, type of cladding material, and understructure—determine architectural expression and form unique appearances of individual buildings. In connection to the sustainable development idea,...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
10 Citations
4,753 Views
24 Pages

Multi-Elemental Coatings on Zirconium Alloy for Corrosion Resistance Improvement

  • Bożena Sartowska,
  • Wojciech Starosta,
  • Lech Waliś,
  • Jerzy Smolik and
  • Ewa Pańczyk

4 August 2022

Zirconium alloys are commonly used as a cladding material for fuel elements in nuclear reactors. This application is connected with zirconium alloy’s good resistance to water corrosion and radiation resistance under normal working conditions. I...

(This article belongs to the Special Issue Advanced Coatings for Accident Tolerant Fuel Claddings)
  • Article
  • Open Access
3 Citations
1,106 Views
15 Pages

24 July 2025

Based on the need to enhance the seismic performance of point-supported steel frame precast cladding panel systems, this study proposes a novel friction-energy-dissipating connection joint. Through establishing refined finite element models, low-cycl...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
5 Citations
2,418 Views
11 Pages

Influence of Column Base Connections on the Cyclic Loading Performance of Double-Jointed Engineered Bamboo Columns

  • Deyue Li,
  • Shanyu Han,
  • Mingqian Wang,
  • Fuming Chen and ,
  • Yubing Leng and
  • Ge Wang
  • + 1 author+ 0 author

15 September 2023

The cyclic loading performance of bamboo double-jointed components of different column base connection types was investigated through reversed cyclic loading tests and finite element analysis. Test results indicated that the types of column base conn...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
21 Citations
3,779 Views
17 Pages

Experimental Research on Water Droplet Erosion Resistance Characteristics of Turbine Blade Substrate and Strengthened Layers Materials

  • Juan Di,
  • Shunsen Wang,
  • Xiaojiang Yan,
  • Xihang Jiang and ,
  • Jinyi Lian,
  • Zheyuan Zhang and
  • Yonghui Xie
  • + 2 authors+ 0 author

25 September 2020

In this paper, the water droplet erosion (WDE) performance of typical martensitic precipitation substrate 0Cr17Ni4Cu4Nb in steam turbine final stage, laser solid solution strengthened sample, laser cladding sample and brazed stellite alloy samples ha...

(This article belongs to the Section Corrosion)
  • Article
  • Open Access
3 Citations
2,244 Views
16 Pages

The mechanism of blast damage to steel-clad concrete-filled steel tube (SCCFST) arched protective doors is studied using the dynamic response characteristics of such loads under the action of blast shock wave loads, and the ultimate blast load-bearin...

(This article belongs to the Special Issue Disaster Mitigation, Risk Reduction, and Resilience Design of Engineering Structures)
  • Article
  • Open Access
8 Citations
4,914 Views
32 Pages

29 May 2024

Building façades represent one of the most critical elements affecting a city’s quality of life, and they impact the country’s economic income by attracting visitors. However, performance data on façades are limited or incom...

(This article belongs to the Special Issue Towards Sustainable Construction: Construction Management and Project Planning/Controls)
  • Article
  • Open Access
17 Citations
6,342 Views
11 Pages

14 December 2018

A Si/graphene/Si planar double heterostructure has been fabricated by means of semiconductor wafer bonding. The interfacial mechanical stability and interlayer electrical connection have been verified for the structure. To the best of our knowledge,...

(This article belongs to the Special Issue Nanotechnologies and Nanomaterials: Selected Papers from CCMR 2019)
  • Article
  • Open Access
15 Citations
4,281 Views
14 Pages

The Microstructure and Wear Resistance of Laser Cladding Ni60/60%WC Composite Coatings

  • Junxiao Liu,
  • Chen Liu,
  • Xiaoyu Zhang,
  • Xiuyuan Yin and ,
  • Fanyu Meng and
  • Changsheng Liu
  • + 1 author+ 0 author

7 February 2025

In this study, Ni60/60%WC composite coatings were fabricated on 45 steel by laser cladding. The optimum process was selected through high throughput optimization experiments which had a laser power of 2400 W, scanning speed of 8 mm/s, and powder feed...

(This article belongs to the Special Issue Advances in Additive Manufacturing and Their Applications (2nd Edition))
  • Review
  • Open Access
26 Citations
11,398 Views
10 Pages

2 March 2017

Compared to hot-rolled steel structures, cold-formed steel structures are susceptible to extreme winds because of the light weight of the building and its components. Many modern cold-formed steel structures have sustained significant structural dam...

(This article belongs to the Special Issue Applications of Thin-Walled Structures)
  • Article
  • Open Access
15 Citations
5,805 Views
19 Pages

18 May 2021

Embroidery is often the preferred technology when rigid circuit boards need to be connected to sensors and electrodes by data transmission lines and integrated into textiles. Moreover, conventional circuit boards, like Lilypad Arduino, commonly lack...

  • Article
  • Open Access
5 Citations
4,625 Views
18 Pages

PTFE-Based Circular Terahertz Dielectric Waveguides

  • Hao Li,
  • Dehai Zhang and
  • Haotian Zhu

29 September 2024

This paper presents the transmission characteristics of flexible solid circular dielectric waveguides in the terahertz frequency band. In this paper, we measured the electrical properties of certain polymers within 325–500 GHz. Through simulati...

(This article belongs to the Section Optical Interaction Science)
  • Review
  • Open Access
37 Citations
15,107 Views
14 Pages

Mechanical and Thermal Properties of Composite Precast Concrete Sandwich Panels: A Review

  • Herman Tawil,
  • Chee Ghuan Tan,
  • Nor Hafizah Ramli Sulong,
  • Fadzli Mohamed Nazri and ,
  • Muhammad M. Sherif and
  • Ahmed El-Shafie
  • + 1 author+ 0 author

11 September 2022

Precast concrete sandwich panels (PCSPs) are utilized for the external cladding of structures (i.e., residential, and commercial) due to their high thermal efficiency and adequate composite action that resist applied loads. PCSPs are composed of an i...

(This article belongs to the Special Issue Advancements in Prefabricated Construction: Materials, Structures, Construction, and Management)
  • Article
  • Open Access
5 Citations
2,555 Views
20 Pages

21 January 2022

Functional Graded Structures and Functional Graded parts, made using dissimilar materials, are designed to provide specific properties to the final product. One of the most promising methods for manufacturing 3D Functional Graded objects is 3D laser...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
121 Citations
6,221 Views
13 Pages

Effect of Ti Content on the Microstructure and Corrosion Resistance of CoCrFeNiTix High Entropy Alloys Prepared by Laser Cladding

  • Xinyang Wang,
  • Qian Liu,
  • Yanbin Huang,
  • Lu Xie and ,
  • Quan Xu and
  • Tianxiang Zhao
  • + 1 author+ 0 author

12 May 2020

In this paper, CoCrFeNiTix high entropy alloy (HEA) coatings were prepared on the surface of Q235 steel by laser cladding. The microstructure, microhardness, and corrosion resistance of the coatings were studied. The mechanism of their corrosion resi...

  • Article
  • Open Access
4 Citations
2,817 Views
14 Pages

30 November 2022

A long period grating Mach–Zehnder interferometer (LPGMZI) that consists of two identical long period gratings (LPGs) in a single fibre was developed to measure immunoglobulin M (IgM). The measured spectrum has fringes due to the interference b...

(This article belongs to the Special Issue Lab on Fiber Optrodes: Towards Point of Care Applications)
  • Article
  • Open Access
1 Citations
1,601 Views
21 Pages

19 June 2025

Sandwich panels have established themselves as self-supporting and isolating construction elements for room closures in hall construction. As a result of subsequently installed photovoltaic (PV) systems or cladding, sandwich panels are subjected to p...

(This article belongs to the Special Issue Experimental and Numerical Analysis of Sandwich Structures)
  • Article
  • Open Access
2 Citations
1,785 Views
23 Pages

Experimental Study on the Mechanical Performance of Reinforced Concrete Joints Connected by T-Shaped Steel Plates

  • Jian Wu,
  • Ying Jiang,
  • Jian Zhou,
  • Chaoqun Hu and ,
  • Jianhui Wang and
  • Weigao Ding
  • + 1 author+ 0 author

28 January 2025

In the case of engineering structures, the performance of a structure will gradually deteriorate with an increase in the usage time, leading to a decrease in the safety of the structure. In addition, even if the safety of a structure is reliable, its...

(This article belongs to the Special Issue Design, Mechanical Properties, and Fatigue Behavior of Materials, Welding Joints and Structures)
  • Article
  • Open Access
19 Citations
4,357 Views
12 Pages

A Study of the Structural Characteristics of Titanium Alloy Products Manufactured Using Additive Technologies by Combining the Selective Laser Melting and Direct Metal Deposition Methods

  • Marina Samodurova,
  • Ivan Logachev,
  • Nataliya Shaburova,
  • Olga Samoilova and ,
  • Liudmila Radionova,
  • Ramil’ Zakirov,
  • Kirill Pashkeev,
  • Vyacheslav Myasoedov and
  • Evgeny Trofimov
  • + 4 authors+ 0 author

8 October 2019

Titanium alloy product manufacturing is traditionally considered to be a rather difficult task. Additive manufacturing technologies, which have recently become quite widespread, can ensure the manufacture of titanium alloys products of an arbitrary g...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
15 Citations
7,581 Views
13 Pages

Photothermal Effect in Plasmonic Nanotip for LSPR Sensing

  • Muhammad Shemyal Nisar,
  • Siyu Kang and
  • Xiangwei Zhao

25 January 2020

The influence of heat generation on the conventional process of LSPR based sensing has not been explored thus far. Therefore, a need exists to draw attention toward the heat generation issue during LSPR sensing as it may affect the refractive index o...

(This article belongs to the Section Chemical Sensors)
  • Article
  • Open Access
3 Citations
2,114 Views
16 Pages

8 April 2025

Zirconium alloys are essential materials for nuclear fuel cladding. During a loss-of-coolant accident (LOCA), zirconium alloy cladding can oxidize in high-temperature steam (>1000 °C), generating hydrogen and releasing significant heat. Withou...

(This article belongs to the Section Thin Films and Interfaces)
  • Article
  • Open Access
15 Citations
8,272 Views
21 Pages

19 June 2015

A considerable part of recent EU policies is currently addressed at developing effective measures to support the transition towards a low carbon society according to the principles and goals of Roadmap to 2050. In this general framework the links bet...

(This article belongs to the Special Issue Buildings, Design and Climate Change)
  • Article
  • Open Access
14 Citations
2,913 Views
13 Pages

MIP-Assisted 3-Hole POF Chip Faced with SPR-POF Sensor for Glyphosate Detection

  • Giancarla Alberti,
  • Stefano Spina,
  • Francesco Arcadio,
  • Maria Pesavento and ,
  • Letizia De Maria,
  • Nunzio Cennamo,
  • Luigi Zeni and
  • Daniele Merli
  • + 3 authors+ 0 author

The present study proposes the application of a recently developed optical–chemical sensor system to glyphosate detection. The device probes the refractive index variation in a chip based on a plastic optical fiber (POF) in which three orthogon...

(This article belongs to the Section Materials for Chemical Sensing)
  • Article
  • Open Access
2 Citations
5,810 Views
15 Pages

Experimental Investigation of Light Steel Framing Walls under Horizontal Loading

  • Dalila M. Lopes,
  • António P. C. Duarte and
  • Nuno Silvestre

11 January 2023

The mechanical behavior of light steel framing (LSF) walls under horizontal (shear) loadings is reported and assessed in this paper. In total, an experimental program with twelve LSF walls (six under monotonic and six under cyclic loading) was conduc...

(This article belongs to the Special Issue Advances in the Behaviour of Steel Structures)
  • Article
  • Open Access
1,011 Views
16 Pages

Plastic Scintillating Fiber Mesh Array Detector for Two-Dimensional Gamma-Ray Source Localization Using an Artificial Neural Network

  • Jinhong Kim,
  • Sangjun Lee,
  • Jae Hyung Park,
  • Seunghyeon Kim and ,
  • Seung Hyun Cho,
  • Chulhaeng Huh and
  • Bongsoo Lee
  • + 2 authors+ 0 author

12 December 2025

In this study, a two-dimensional gamma-ray source localization system using a mesh array of plastic scintillating fibers and an artificial neural network is presented. The system covers a 200 cm by 100 cm area using SCSF-78 multi-cladded fibers. A no...

(This article belongs to the Special Issue Advancements in Optical Measurement Techniques and Applications)
  • Article
  • Open Access
56 Citations
8,212 Views
15 Pages

A Simple Small Size and Low Cost Sensor Based on Surface Plasmon Resonance for Selective Detection of Fe(III)

  • Nunzio Cennamo,
  • Giancarla Alberti,
  • Maria Pesavento,
  • Girolamo D'Agostino and ,
  • Federico Quattrini,
  • Raffaela Biesuz and
  • Luigi Zeni
  • + 2 authors+ 0 author

7 March 2014

A simple, small size, and low cost sensor based on a Deferoxamine Self Assembled Monolayer (DFO-SAM) and Surface Plasmon Resonance (SPR) transduction, in connection with a Plastic Optical Fiber (POF), has been developed for the selective detection of...

(This article belongs to the Special Issue Plasmonics and Nanoplasmonics Biosensors)
  • Article
  • Open Access
20 Citations
4,880 Views
11 Pages

Vertical Integration of Nitride Laser Diodes and Light Emitting Diodes by Tunnel Junctions

  • Marcin Siekacz,
  • Grzegorz Muziol,
  • Henryk Turski,
  • Mateusz Hajdel and ,
  • Mikolaj Żak,
  • Mikolaj Chlipała,
  • Marta Sawicka,
  • Krzesimir Nowakowski-Szkudlarek,
  • Anna Feduniewicz-Żmuda and
  • Czeslaw Skierbiszewski
  • + 7 authors+ 2 authors

10 September 2020

We demonstrate the applications of tunnel junctions (TJs) for new concepts of monolithic nitride-based multicolor light emitting diode (LED) and laser diode (LD) stacks. The presented structures were grown by plasma-assisted molecular beam epitaxy (P...

(This article belongs to the Special Issue Micro- and Nanotechnology of Wide Bandgap Semiconductors)
  • Article
  • Open Access
4 Citations
2,586 Views
9 Pages

14 December 2018

We have investigated a new type of redirection waveguides for concentration solar-cell systems. The solar cell units are to be placed in the peripheral region of the waveguide. The redirection waveguide converts three-dimensionally propagating (3D) p...

(This article belongs to the Section A: Sustainable Energy)
  • Article
  • Open Access
34 Citations
10,099 Views
20 Pages

Diagnosis of Insulation Condition of MV Switchgears by Application of Different Partial Discharge Measuring Methods and Sensors

  • Fernando Álvarez Gómez,
  • Ricardo Albarracín-Sánchez,
  • Fernando Garnacho Vecino and
  • Ricardo Granizo Arrabé

28 February 2018

Partial discharges (PD) measurement provides valuable information for the condition assessment of the insulation status of high-voltage (HV) electrical installations. During the last three decades, several PD sensors and measuring techniques have bee...

(This article belongs to the Special Issue UHF and RF Sensor Technology for Partial Discharge Detection)
  • Article
  • Open Access
955 Views
37 Pages

This study experimentally investigates the structural behavior of hexagonal- and square-shaped composite specimens subjected to vertical compression, vertical tension, and diagonal tension loading. The specimens were fabricated using four- and six-la...

  • Article
  • Open Access
403 Views
19 Pages

Gas–Solid Two-Phase Flow-Induced Pipeline Wear in CAES: Enhancing Long-Term Durability for Energy Conversion and Storage Integration

  • Tao Wang,
  • Xijie Song,
  • Jie Wang,
  • Yongyao Luo and ,
  • Weiqiang Zhao and
  • Longfei Li
  • + 1 author+ 0 author

5 August 2026

In salt cavern compressed air energy storage (CAES) systems, slag particles entrained by high-pressure airflow can cause pipeline wear and flow instability, posing challenges to long-term operational safety. However, direct experimental studies are c...

  • Article
  • Open Access
5 Citations
1,254 Views
17 Pages

Dissimilar Welded Joints and Sustainable Materials for Ship Structures

  • Giuseppe Brando,
  • Fabio Distefano,
  • Francesca Di Carolo,
  • Vincenzo Crupi and ,
  • Gabriella Epasto and
  • Umberto Galietti
  • + 1 author+ 0 author

3 December 2025

Shipbuilding and offshore structures employ a wide range of metallic materials, from standard and high-strength steels to non-ferrous aluminium and titanium alloys. While welding remains the dominant joining method, the reliable joining of dissimilar...

(This article belongs to the Special Issue Advancing the Ultimate Strength of Offshore Structures for Sustainable and Resilient Marine Energy Systems)

of 2