To explore the feasibility of hot metal desulfurization using red mud, the sulfur distribution ratio (LS) between CaO-SiO2-Al2O3-Na2O-TiO2 slag and carbon-saturated iron is evaluated in this paper. First, the theoretical liquid areas of the CaO-SiO2-...
One of the main charging materials of the Linz–Donawitz oxygen steelmaking process (LD) is scrap. Scrap acts as a coolant for the exothermic reactions inside the LD vessel and as an iron source in addition to hot metal. The optimization of the...
The isothermal heat treatment process has been identified as a unique process of fabricating exceptional graphite cast iron due to its remarkable mechanical properties, such as excellent machinability, toughness, and high level of ultimate tensile st...
The ZrO2(MgO)/CaAl2O4+CaAl4O7 bilayer structure used for sulfur sensor was fabricated by the laser powder cladding (LPC) method using the MgO partially stabilized zirconia (2.7 wt% MgO-PSZ) as the substrate and the CaAl2O4 + CaAl4O7 composites as the...
The current research studied the effects of laser surface hardening treatment on the phase transformation and wear properties of gray cast irons heat treated by austempering or quench-tempering, respectively. Three austempering temperatures of 232 &d...
How to design a simple and scalable procedure for manufacturing multifunctional carbon-based nanoparticles using lignocellulosic biomass directly is a challenging task. Based on the green chemistry concept, we developed a novel one-pot solution-phase...
This study simulated the corrosion reaction of S-carbon bricks in a hearth at different carbon contents, flow velocities and temperatures, and their macroscopic and microscopic morphologies were observed by scanning electron microscopy (SEM) and ener...
This paper details the characterisation of char obtained by high-temperature pyrolysis of waste macadamia shell biomass and its application as carbon source in iron-carbon alloy production. The obtained char was characterised by ultimate and proximat...
We present a simple strategy to generate a family of carbon dots/iron oxide nanoparticles (C/Fe-NPs) that relies on the thermal decomposition of iron (III) acetylacetonate in the presence of a highly fluorescent carbon-rich precursor (derived via the...
Oleic acid (OA)-modified Fe3O4 nanoparticles were successfully covered with polyanilines (PANIs) via inverse suspension polymerization in accordance with SEM and TEM micrographs. The obtained nanoparticles were able to develop into a ferrite (α-Fe) a...
In this study, following the concept of “treating waste with waste”, magnetic chitosan carbon (MCC) was developed through the pyrolysis of chitosan/iron sludge (CHS) beads created using an embedding method in a closed environment for anti...
Fe-CNT composites were synthesized via mechanical ball milling, incorporating varying amounts of carbon nanotubes (CNTs) into iron powder at concentrations of 1 wt%, 2 wt%, and 3 wt%. The impact of different CNT contents on the phase structure, micro...
The purpose of this work is to evaluate the corrosion-inhibition behavior of deposited carbon and some iron-oxide hybrid coatings which derived from the in situ deposition method on the surface of Fe foil. Various contents of precursor methane gas we...
Carbon-based nanocomposites coated with iron oxides were synthesized using a wet impregnation method with thermally annealed coal and an iron nitrate precursor. The influence of the thermal treatment atmosphere (air, vacuum, or nitrogen) on the morph...
The carburization of molten iron is close to saturation in the blast furnace process, while that in the flash ironmaking process is uncertain because there is no pressure from solid charge and no carburization reactions occurring between the deadman...
In this study, a novel low-temperature (300–500 °C) carbothermal reduction route employing potassium ferrate and sodium hydroxide was developed to synthesize magnetic zero-valent iron-doped biochar for removing tetracycline and ciprofloxaci...
Carbon steel and bentonite are materials selected as engineered barriers for high-level radioactive waste confinement. Their long-term interaction must be evaluated to confirm the barrier’s stability. Three laboratory experiments of the carbon...
(Fe/C)/ABS resin electromagnetic metamaterials were fabricated via 3D printing, and the effect of iron salt loading (0, 1, 2, and 3 g) in the Fe/C filler on the microwave absorption performance of the resulting composites was systematically investiga...
This study presents a fluidization roasting technology for siderite-bearing iron ore without the use of carbon additives. Samples of Jingtieshan iron ore were subjected to fluidization magnetization roasting, and the effects of roasting temperature,...
In this paper, the liquid phase sintering was performed using spark plasma sintering to produce iron (Fe: 80 vol%)–aluminum (Al)–multi-walled carbon nanotubes (MWCNTs) magnetic hybrid metal matrix nanocomposites. The properties of the nan...
Oxidation of native iron in the mantle at a depth about 250 km and its influence on the stability of main carbon and nitrogen hosts have been reconstructed from the isothermal section of the ternary phase diagram for the FeO-Fe3C-Fe3N system. The res...
Bauxite residue is a high-iron waste of the alumina industry with significant contents of scandium, aluminum, and titanium. This study focuses on the recovery of Sc, Al, Ti, and Si from iron-depleted bauxite residue (IDBR) into valuable products. Iro...
Strontium is a toxic chemical element widely distributed in groundwater. First of all, its appearance in water is associated with the dissolution of sulfate and carbonate rocks. The aim of this study was to assess the characteristics of strontium con...
Metallic and organometallic nanoparticles exhibit intriguing size- and morphology-dependent magnetic properties that differ markedly from their bulk counterparts. Here, we report a detailed synthesis and characterization of iron (Fe), copper (Cu), ni...
In the paper, the effects, on basic usable properties (abrasive wear and corrosion resistance), of solidification (acc. to the stable and non-stable equilibrium system) and transformations occurring in the matrix during the cooling of castings of Ni-...
Electrochemical crosslinking of alginate strands by in situ iron oxidation was explored using a potentiostatic regime. Carbon-based materials co-doped with iron, nitrogen, and/or sulfur were prepared via electrolyte composition variation with a nitro...
The influence of the grinding process on the magnetic properties of as prepared and functionalized multiwall carbon nanotubes (MWCNTs) is presented. We have observed that 3 h mechanical grinding at 400 rpm in contrast to functionalization does not re...
Dissimilatory metal-reducing bacteria are ubiquitous in soils worldwide, possess the ability to transfer electrons outside of their cell membranes, and are capable of respiring with various metal oxides. Reduction of iron oxides is one of the more en...
The development of efficient and recoverable catalysts is essential for advancing carbon dioxide utilization technologies and improving the sustainability of catalytic processes. Magnetic iron oxide-based composites supported on carbon materials are...
This study optimized corncob-derived magnetic biochar (MBC) with tailored iron content for laccase immobilization to boost nonylphenol (NP) degradation in water. Low-iron MBC (LMBC) and high-iron MBC (HMBC) from corncob were prepared via impregnation...
This paper aims to investigate different properties of the Fe-Al matrix reinforced with multi-walled carbon nanotube (MWCNT) nanocomposites with the Al volume content up to 65%, according to the Fe-Al combination. In addition, the effect of adding Co...
Vertically aligned carbon nanotube (VACNT) forests are promising for supercapacitor electrodes, but their industrialisation requires a large-scale cost-effective synthesis process suitable to commercial aluminium (Al) foils, namely by operating at a...
Novel ternary hybrid polyphenoxazine (PPOA)-derived nanocomposites involving Co-Fe particles and single-walled (SWCNTs) or multi-walled (MWCNTs) carbon nanotubes were prepared and investigated. An efficient one-pot method employing infrared (IR) heat...
Isocitric acid (ICA) has found wide application in medicine as a promising compound with powerful antioxidant activity to combat oxidative stress. In the known microbiological processes of ICA production by non-conventional yeast Yarrowia lipolytica,...
In view of a simple after-use separation, the potentiality of producing magnetic activated carbon (MAC) by intercalation of ferromagnetic metal oxide nanoparticles in the framework of a powder activated carbon (PAC) produced from primary paper sludge...
In this research, an austempering heat treatment was applied on gray cast iron using various austempering temperatures ranging from 232 °C to 371 °C and holding times ranging from 1 min to 120 min. The microstructure and hardness were examine...
Bentonite is a claystone formed by a complex mineralogical mixture, composed of montmorillonite, illite, and accessory minerals like quartz, cristobalite, feldspars, carbonates, and minor amounts of iron oxy-hydroxides. Bentonite presents complexity...
In recent years, geothermal energy use from low-temperature sandstone reservoirs has sharply increased. Nonetheless, the injection of heat-depleted geothermal fluids has not been an easy task because of well/formation damage and operational/economic...
The paper considers the problem of increasing the wear resistance of steel products. For the first time, the technology of anodic plasma electrolytic sulfiding is proposed to increase the wear resistance of low-carbon steel. The composition, structur...
Natural gas sweetening is an essential process within hydrocarbon processing operations, enabling compliance with product quality specifications, avoiding corrosion problems, and enabling environmental care. This process aims to remove hydrogen sulfi...
Determining the constitutive properties that describe the incipient hydraulic behavior of the materials, including the matrix domains and the distribution of macro and micropores, is crucial to analyzing the preferential water flow in saturated soils...
This paper proposes a new method for producing nano-SrFe12O19 powder by the citrate precursor route using solid waste as a source of iron. This solid iron-containing waste, which exists in the form of an oily sludge, is produced by a cold rolling mil...
Nanometer zero-valent iron (nZVI) has been widely used in the treatment of heavy metals such as hexavalent chromium (Cr(VI)). A novel composite of bead string-structured nZVI on modified activated carbon (nZVI–MAC) is prepared here, using polye...
In this study, the growth of high-quality graphite single crystals from a molten metal flux at atmospheric pressure was optimized. The crystals were precipitated from a saturated iron–carbon solution by slowly cooling (4 °C/h) from a maximu...
To provide an economical magnetic photocatalyst and introduce an innovative approach for efficiently utilizing discarded waste rice noodle (WRN) and iron oxide scale (IOS), we initially converted WRN into carbon quantum dots (CQDs) using a hydrotherm...
Mining at the Red Dog Mine generated a 60 million-tonne waste rock stockpile that produces acid rock drainage with pH values typically below 3. The drainage chemistry is controlled by the competing kinetics of acid-generating iron sulfide weathering...
Iron and iron-nickel alloy electrodeposits synthesized from sulfate-based electroplating baths were applied to a mild carbon steel substrate. Coated specimens were immersed in an oxygen-saturated, weak ammonium hydroxide solution (pH 9.5–10.0),...
Single-walled carbon nanotubes (SWCNTs) loaded with magnetic iron oxide nanoparticles were prepared by the arc discharge method and air heat treatment. The nanocomposite was characterized by X-ray diffraction, scanning electron microscopy, Raman spec...
Saltwater batteries can be made using brine from the desalination of seawater for low-cost energy storage. This study investigates the performance characteristics of saltwater batteries for potential off-grid energy applications. The systematic inves...
The particles from gas saturated solutions (PGSS) process were performed to encapsulate lactofer-rin, an iron-binding milk glycoprotein, using supercritical carbon dioxide (scCO2). A natural en-teric polymer, shellac, was used as a coating material o...
of 2