Parts with microstructure arrays have been widely used in biotechnologies and optical technologies, and their performances are affected by replication uniformity. The uniformity of the microstructure is still a challenge in micro-injection molded par...
We report on curved film microstructure arrays fabricated through polydimethylsiloxane (PDMS) film buckling induced by mechanical stretching. In the process of the microstructure preparation, a PDMA film is glued on a bidirectionally prestretched PDM...
Polymer-based micro-electrode arrays (MEAs) are gaining attention as an essential technology to understand brain connectivity and function in the field of neuroscience. However, polymer based MEAs may have several challenges such as difficulty in per...
This polymer microstructure expands more available application, which is a milestone for the development of micro-electro-mechanical system devices towards intelligence and multifunction. Poor interface bonding between the polymer and Si or metal is...
The roller-to-plate (R2P) hot-embossing process is an effective, low-cost method for producing high-quality micro-/nano-optical components. In the field of night vision applications, the fabrication of chalcogenide glass microstructures is emerging a...
Flexible electrodes are extensively used to detect signals in electrocardiography, electroencephalography, electro-ophthalmography, and electromyography, among others. These electrodes can also be used in wearable and implantable medical systems. The...
This study proposed the belt-type microstructure array flexible mold designed hot roller embossing process technology. An extrusion molding system was integrated with belt-type hot roller embossing process technology and, deriving the asymmetric prin...
Unidirectional transport is attracting increasing attention in the field of microfluidics, because it does not require an external energy supply. However, most of the current self-driving structures are still plagued with persistent problems that res...
In the light of recent advances in material informatics, there is a great demand for high-throughput approaches of sample fabrication and property characterization. Currently, no high-throughput approach has been demonstrated for the fast sampling of...
Inspired by the array microstructure of natural superhydrophobic surfaces (lotus leaf and cicada wing), an array microstructure was successfully constructed by high speed wire electrical discharge machining (HS-WEDM) on the surfaces of a 7075 aluminu...
An ultrasonic plasticizing and pressing method (UPP) that fully utilizes ultrasonic vibration is proposed for fabricating thermoplastic polymer surface microstructures with high aspect ratios (ARs). The characteristics of UPP are elucidated based on...
We demonstrate two distinct experimental processes involving the large-area growth of ordered and disordered silicon nanowire arrays (SiNWs) on a p-type silicon substrate using the metal-assisted chemical etching method. The two processes are based o...
Flexible pressure sensors have been widely used in health detection, robot sensing, and shape recognition. The micro-engineered design of the intermediate dielectric layer (IDL) has proven to be an effective way to optimize the performance of flexibl...
A continuum-based micromechanical model is employed for the prediction of the elasto-plastic behavior of periodic microstructural arrays that can generate negative values of Poisson’s ratios. The combined effects of the negative Poisson’s ratio gener...
The multi-layer workpiece and multi-wire electrochemical microfabrication method (MWECM) has considerable potential in improving production efficiency and is considered a promising technology for manufacturing high-quality array microstructures. Howe...
High-density tactile sensor arrays that replicate human touch could restore texture perception in paralyzed individuals. However, conventional tactile sensor arrays face inherent trade-offs between spatial resolution, sensitivity, and crosstalk suppr...
Previous models of the relative tool-work vibration are not generalized to represent the surface generation mechanism in the ultra-precision tool servo-based diamond cutting (UTSDC) of three-dimensional (3D) microstructured surfaces. This is due to t...
Microarrays are essential components of analytical instruments. The elements of microarrays may be imbued with additional functionalities and encodings using composite materials and structures, but traditional microfabrication methods present substan...
Using micro-structure components in spectacle lenses has enabled myopia progression control in children and teenagers. However, the optical design of these spectacle lenses has never been discussed, leading to a lack of correct understanding of the u...
Three-dimensional (3D) microstructure arrays (MSAs) have been widely used in material science and biomedical applications by providing superhydrophobic surfaces, cell-interactive topography, and optical diffraction. These properties are tunable throu...
Rotor imbalance and abnormal vibration are classical operating conditions in rotating machinery and can often be identified by conventional vibration analysis. However, the development of low-power, self-powered, and distributed sensing nodes remains...
Residual stress influences dimensional stability, fatigue, fracture and structural integrity in welded and additively manufactured components. Ultrasonic methods offer a non-destructive and deployable alternative to diffraction and strain-relief tech...
The demand for the development of local laser sintering of nanoparticle arrays is explained by the expanding needs for printed electronics for functional microstructure formation, on heat-sensitive substrates in particular. This work is based on the...
The conventional reflective optical surface with adjustable reflection characteristics requires a complex external power source. The complicated structure and preparation process of the power system leads to the limited modulation of the reflective p...
A laser based technique for microstructuring titanium and tantalum substrates using the Talbot effect and an array of microlenses is presented. By using this hybrid technique; we are able to generate different patterns and geometries on the top surfa...
Inkjet printing has been proved to be a powerful tool in the cost-effective ambient deposition of functional materials for the fabrication of electronic devices in the past decades. However, restricted by equipment and inks, the feature size of print...
Superhydrophobic materials are significant for engineering applications in the anti-icing field because of their non-wetting property. The interface physical mechanisms of non-wetting properties are important to promote real applications of superhydr...
SiO2 thin films are deposited by radio frequency (RF) plasma-enhanced chemical vapor deposition (PECVD) technique using SiH4 and N2O as precursor gases. The stoichiometry of SiO2 thin films is determined by the X-ray photoelectron spectroscopy (XPS),...
Layered Eu-doped SnO2 ordered nanoarrays constructed by nanorods with 10 nm diameters and several hundred nanometers length were synthesized by a substrate-free hydrothermal route using alcohol and water mixed solvent of sodium stannate and sodium hy...
Recent advances in flexible pressure sensors have fueled increasing attention as promising technologies with which to realize human epidermal pulse wave monitoring for the early diagnosis and prevention of cardiovascular diseases. However, strict req...
Hydrophobic surfaces have attracted great attention due to their ability to repel water, and metallic surfaces are particularly significant as they have several benefits, for example they self-clean and do not corrode in marine environments, but also...
Detecting volatile organic compounds (VOCs) is essential because they affect air quality and can serve as biomarkers for non-invasive early disease detection. VOCs can be identified using electronic noses combining cross-reactive sensors, pattern rec...
The poor thermoplastic formability of reactive Zr-based bulk metallic glass becomes the main limiting factor for replacing the noble-metal-based and Be-rich bulk metallic glasses in nanostructure fabrication. In our work, a (Zr50.7Cu28Ni9Al12.3)98.5Y...
In this study, the binary bat algorithm (BBA) for structural topology optimization is implemented. The problem is to find the stiffest structure using a certain amount of material and some constraints using the bit-array representation method. A new...
With the development of biomedical technology, personalized diagnosis and treatment at the single-cell level are becoming more important in the medical field. As one of the most powerful tools, microfluidic chips have shown significant potential for...
A micro-level technique so-called “microfluidic technology or simply microfluidic” has gained a special place as a powerful tool in bioengineering and biomedical engineering research due to its core advantages in modern science and engine...
The aim of this investigation is to determine the effects of hooked-end steel fibers on both the fresh and hardened properties of modified self-compacting concretes (SCC). For this purpose, the steel fibers are associated with other residue contents...
Ultrafast lasers, characterized by femtosecond and picosecond pulse durations, have revolutionized material processing due to their high energy density and minimal thermal diffusion, and have played a transformative role in precision manufacturing. T...
Photoactuated pens have emerged as promising tools for expedient, mask-free, and versatile nanomanufacturing. However, the challenge of effectively controlling individual pens in large arrays for high-throughput patterning has been a significant hurd...
This study presents a new approach to investigating the impact of repeated reflow on the failure of ball grid array (BGA) packages. The issue with the BGA package collapse is that the repeated reflow can lead to short circuits, particularly for BGAs...
In this work, a polymer microlens array (MLA) for a hyperspectral imaging (HSI) system is produced by means of ultraprecision milling (UP-milling) and injection compression molding. Due to the large number of over 12,000 microlenses on less than 2 cm...
The present study investigated high-aspect ratio micro-hole array parts which were made by ZrO2 micro-powder with different particle sizes and micro-powder injection molding technology. It analysed the influence of particle sizes on feedstock, debind...
Polymethyl methacrylate (PMMA) is a material with good surface wettability and has unique and widespread applications in industrial fields. However, fabricating this material in an environmentally friendly way while maintaining its mechanical robustn...
A new 2D microstructure is proposed herein in the form of rigid unit cells, each taking the form of a cross with two opposing crossbars forming slots and the other two opposing crossbars forming sliders. The unit cells in the microstructure are arran...
Ferrite is an essential functional material for high-power nonreciprocal microwave components, such as circulators and isolators, and its secondary electron emission (SEE) property is critical for suppressing the multipactor effect under vacuum condi...
The array of regular square pyramid microstructures with zero-spacing features is an ideal structural topology for building superhydrophobic functional surfaces due to its excellent anti-wetting performance and low surface adhesion properties. In the...
Cell separation plays an important role in the fields of analytical chemistry and biomedicine. To solve the blockage problem and improve the separation throughput in the traditional microstructure filtration-based separation approach, a continuous ce...
We formulated a latex ink for ink-jet deposition of viable Gram-negative bacterium Gluconobacter oxydans as a model adhesive, thin, highly bio-reactive microstructured microbial coating. Control of G. oxydans latex-based ink viscosity by dilution wit...
Three methods were used to fabricate ZnO-based room temperature liquid petroleum gas (LPG) sensors having interdigitated metal-semiconductor-metal (MSM) structures. Specifically, devices with Pd Schottky contacts were fabricated with: (1) un-doped Zn...
A photovoltaic-thermal side-absorption concentrated module (PT-SACM) based on spectrum division for photovoltaic-thermal hybrid applications is carried out. In order to reduce the absorption by materials and the axial-chromatic aberration caused by t...
of 8