Skip to Content

2,425 Results Found

  • Review
  • Open Access
15 Citations
6,315 Views
20 Pages

Recent Advances in Metal–Organic Frameworks for the Surface Modification of the Zinc Metal Anode: A Review

  • Yibo Xing,
  • Kaijia Feng,
  • Chunyang Kong,
  • Guangbin Wang and ,
  • Yifei Pei,
  • Qixiang Huang and
  • Yong Liu
  • + 2 authors+ 0 author

18 August 2023

Aqueous zinc ion batteries (AZIBs) are considered as one of the most promising energy storage technologies due to their advantages of being low in cost, high in safety, and their environmental friendliness. However, dendrite growth and parasitic side...

(This article belongs to the Special Issue Surface Modification of Advanced Transition Metal-Based Materials for Electrochemical Energy Storage)
  • Article
  • Open Access
20 Citations
5,538 Views
12 Pages

A Highly Efficient Dual Rotating Disks Photocatalytic Fuel Cell with Wedged Surface TiO2 Nanopore Anode and Hemoglobin Film Cathode

  • Chen Yang,
  • Yi He,
  • Kan Li,
  • Diwen Ying and ,
  • Ye Yao,
  • Tiantian Tang,
  • Yalin Wang and
  • Jinping Jia
  • + 3 authors+ 0 author

4 August 2016

In this study, a dual rotating-disk photocatalytic fuel cell using TiO2 on Ti plate with a wedged surface as the anode and hemoglobin (Hb) on graphite as the cathode was investigated and found to show excellent performance of simultaneous organic pol...

(This article belongs to the Special Issue Photocatalytic Wastewater Treatment)
  • Article
  • Open Access
8 Citations
6,783 Views
31 Pages

1 February 2024

Severe volumetric expansion (~400%) limits practical application of silicon nanoparticles as anode materials for next-generation lithium-ion batteries (LIBs). Here, we describe the fabrication and characterization of a conformal polydopamine carbon s...

  • Article
  • Open Access
9 Citations
4,493 Views
16 Pages

Performance Enhancement of Ti/IrO2-Ta2O5 Anode through Introduction of Tantalum–Titanium Interlayer via Double-Glow Plasma Surface Alloying Technology

  • Mingshuai Guo,
  • Yueren Liu,
  • Yonglei Xin,
  • Likun Xu and ,
  • Lili Xue,
  • Tigang Duan,
  • Rongrong Zhao,
  • Junji Xuan and
  • Li Li
  • + 4 authors+ 0 author

18 July 2024

Ti/IrO2-Ta2O5 electrodes are extensively utilized in the electrochemical industries such as copper foil production, cathodic protection, and wastewater treatment. However, their performance degrades rapidly under high current densities and severe oxy...

  • Article
  • Open Access
11 Citations
3,476 Views
10 Pages

Plasmon Tuning of Liquid Gallium Nanoparticles through Surface Anodization

  • Chih-Yao Chen,
  • Ching-Yun Chien,
  • Chih-Ming Wang,
  • Rong-Sheng Lin and
  • I-Chen Chen

15 March 2022

In this work, tunable plasmonic liquid gallium nanoparticles (Ga NPs) were prepared through surface anodizing of the particles. Shape deformation of the Ga NPs accompanied with dimpled surface topographies could be induced during electrochemical anod...

  • Article
  • Open Access
2 Citations
1,245 Views
11 Pages

Attachment of Human Epithelial Cells to an Anodized Titanium Surface

  • Yoshihiko Akashi,
  • Hayato Hashiguchi,
  • Yoshitaka Yamaoka,
  • Kei Nakajima and ,
  • Katsutoshi Kokubun,
  • Yoshiaki Shimoo and
  • Kenichi Matsuzaka
  • + 2 authors+ 0 author

14 July 2025

The attachment of the oral epithelium to the abutment surface is crucial for the long-term success of dental implants. This study aimed to evaluate the attachment of human epithelial cells to anodized titanium surfaces. Anodized titanium discs were u...

(This article belongs to the Special Issue Advances in Dental Implants and Prosthetics Materials)
  • Feature Paper
  • Article
  • Open Access
4 Citations
3,046 Views
15 Pages

15 December 2023

Micro-drilled aluminum surfaces containing micro-holes were anodized to produce nanopores over the machined and lapped surfaces. The anodized nanopores had an approximate diameter of 30–40 nm and a depth distribution of 20–30 μm from t...

(This article belongs to the Special Issue Selected Papers from the K-TRIB2023)
  • Article
  • Open Access
1,565 Views
19 Pages

Insight into Surface Properties of Anodic Oxidized Ti6Al7Nb Alloy for Biomedical Applications

  • Karolina Wilk,
  • Maciej Krzywiecki,
  • Lucyna Grządziel,
  • Marcin Godzierz and ,
  • Ada Orłowska,
  • Sławomir Suchoń,
  • Miłosz Chrzan,
  • Michał Burkacki,
  • Wojciech Kajzer and
  • Janusz Szewczenko
  • + 5 authors+ 0 author

10 August 2026

The Ti6Al7Nb alloy is increasingly applied as a vanadium-free alternative to Ti6Al4V for biomedical implants; however, implant performance is governed predominantly by the physicochemical properties of the surface layer. In this study, anodic oxidati...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
2 Citations
1,128 Views
26 Pages

High-Pressure Torsion and Anodic Oxidation as a Method for Surface Engineering of Ti-13Nb-13Zr Biomedical Alloy

  • Dragana R. Mihajlović,
  • Bojan I. Medjo,
  • Jelena B. Bajat and
  • Veljko R. Djokić

8 September 2025

The anodic oxidation technique was used for surface modification, resulting in the creation of a titanium-based nanotube oxide layer on a coarse-grained and ultrafine-grained Ti-13Nb-13Zr alloy. The modified surface morphology was analyzed using scan...

  • Article
  • Open Access
7 Citations
2,650 Views
13 Pages

Surface Microstructure and Performance of Anodized TZ30 Alloy in SBF Solution

  • Kaiyang Liu,
  • Yixin Zhou,
  • Lixia Yin,
  • Yindong Shi and ,
  • Guangwei Huang,
  • Xiaoyan Liu,
  • Liyun Zheng,
  • Zhenguo Xing,
  • Xiliang Zhang and
  • Shunxing Liang
  • + 5 authors+ 0 author

23 April 2022

Anodization is performed on the Ti-30Zr-5Al-3V (TZ30) alloy to improve its surface performance. X-ray diffractometer (XRD), scanning electron microscopy (SEM), and Olympus microscope are used to determine the phase constitution, morphology, and thick...

(This article belongs to the Section Structural Integrity of Metals)
  • Article
  • Open Access
11 Citations
3,115 Views
13 Pages

In Vitro Characterization of an Anodized Surface of a Dental Implant Collar and Dental Abutment on Peri-Implant Cellular Response

  • Valeria Traver-Méndez,
  • Octavi Camps-Font,
  • Francesc Ventura,
  • Miquel Angel Nicolau-Sansó and ,
  • Carles Subirà-Pifarré,
  • Rui Figueiredo and
  • Eduard Valmaseda-Castellón
  • + 2 authors+ 0 author

1 September 2023

The purpose of this paper was to determine the effect of anodization on the in vitro proliferation and adhesion of immortalized human keratinocytes (HaCats) and mouse bone marrow-derived mesenchymal stem cells (BM-MSCs) in Titanium Grade 23 (Ti6Al4V...

(This article belongs to the Special Issue From Conventional towards Modern Biomaterials in Dentistry)
  • Article
  • Open Access
11 Citations
4,456 Views
15 Pages

9 April 2024

This study investigates the impact of the surface characteristics and the inner close-to-surface characteristics of die-cast Al-Si-Cu alloy on the anodizing process under steady-state voltage and current modes. Samples of industrial-pressure die-cast...

  • Article
  • Open Access
18 Citations
4,157 Views
14 Pages

Nanostructure of Porous Si and Anodic SiO2 Surface Passivation for Improved Efficiency Porous Si Solar Cells

  • Panus Sundarapura,
  • Xiao-Mei Zhang,
  • Ryoji Yogai,
  • Kazuki Murakami and ,
  • Alain Fave and
  • Manabu Ihara
  • + 1 author+ 0 author

11 February 2021

The photovoltaic effect in the anodic formation of silicon dioxide (SiO2) on porous silicon (PS) surfaces was investigated toward developing a potential passivation technique to achieve high efficiency nanostructured Si solar cells. The PS layers wer...

(This article belongs to the Special Issue Nanostructured Materials for Solar Cell Applications)
  • Article
  • Open Access
469 Views
22 Pages

Hierarchical Micro/Nanostructured Anodized Surface for a 3D-Printed Bioactive Kinetic Screw

  • Carlos Aurelio Andreucci,
  • Elza M. M. Fonseca,
  • Jonata Rodrigues Dias Batista,
  • Mariana de Souza Sikora and
  • Francisco Trivinho Strixino

4 August 2026

Technological development in surface treatment for biomedical implants has advanced rapidly, yet the integration of additive manufacturing with controlled nano topography remains underexplored. This study investigates a novel bioactive kinetic screw...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
18 Citations
8,937 Views
25 Pages

An Experimental Anodized Titanium Surface for Transgingival Dental Implant Elements—Preliminary Report

  • Jakub Hadzik,
  • Paweł Kubasiewicz-Ross,
  • Tomasz Gębarowski,
  • Natalia Waloszczyk and ,
  • Artur Maciej,
  • Agnieszka Stolarczyk,
  • Tomasz Gedrange,
  • Marzena Dominiak,
  • Ernest Szajna and
  • Wojciech Simka
  • + 5 authors+ 0 author

The characteristics such as microtopography, physical and chemical properties influence the behavior of an implant in a soft tissue. Anodization—as a potent method of titanium alloy surface modification—of the transgingival abutment or he...

(This article belongs to the Special Issue Biomaterials and Bioengineering in Dentistry)
  • Article
  • Open Access
1,503 Views
21 Pages

14 January 2026

Nanoporous gold (np-Au) has attracted significant attention for biomedical and electrochemical applications due to its high surface area, tunable morphology, and excellent biocompatibility. In this study, polycrystalline gold surfaces were modified b...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
46 Citations
5,622 Views
11 Pages

Preparation of Superhydrophobic Surface on Titanium Alloy via Micro-Milling, Anodic Oxidation and Fluorination

  • Xiao Zhang,
  • Yi Wan,
  • Bing Ren,
  • Hongwei Wang and ,
  • Mingzhi Yu,
  • Anqi Liu and
  • Zhanqiang Liu
  • + 2 authors+ 0 author

17 March 2020

The superhydrophobic surface has a great advantage of self-cleaning, inhibiting bacterial adhesion, and enhancing anticoagulant properties in the field of biomedical materials. In this paper, a superhydrophobic surface was successfully prepared on ti...

(This article belongs to the Special Issue Ultra Precision Technologies for Micromachining)
  • Review
  • Open Access
156 Citations
17,642 Views
41 Pages

7 July 2014

Electrochemical anodization of pure aluminum enables the growth of highly ordered nanoporous anodic alumina (NAA) structures. This has made NAA one of the most popular nanomaterials with applications including molecular separation, catalysis, photoni...

(This article belongs to the Special Issue Nanopore Sensors: Fabrications, Properties and Applications)
  • Article
  • Open Access
33 Citations
5,118 Views
11 Pages

Micro-Scale Surface Patterning of Titanium Dental Implants by Anodization in the Presence of Modifying Salts

  • Gaetano Marenzi,
  • Gianrico Spagnuolo,
  • Josè Camilla Sammartino,
  • Roberta Gasparro and ,
  • Alberto Rebaudi and
  • Marco Salerno
  • + 1 author+ 0 author

30 May 2019

The bone-implant interface influences peri-implant bone healing and osseointegration. Among various nano-engineering techniques used for titanium surface modification, anodization is a simple, high-throughput and low-cost process, resulting in a nano...

(This article belongs to the Special Issue Advanced Materials for Oral and Dentofacial Surgery)
  • Article
  • Open Access
602 Views
17 Pages

Ultrafast Tea Polyphenol Surface Conditioning Creates a Zincophilic Interphase for Durable Zinc Anodes

  • Yimin Jiang,
  • Chenxia Zhao,
  • Luo Zhang,
  • Yi Guo and ,
  • Yu Jiang and
  • Dingyu Yang
  • + 1 author+ 0 author

12 August 2026

The practical deployment of aqueous zinc-ion batteries (AZIBs) is critically limited by uneven Zn2+ flux, uncontrolled dendrite growth, and concurrent parasitic reactions—notably the hydrogen evolution reaction (HER) and anode corrosion—a...

(This article belongs to the Special Issue Nanostructured Materials for Electric Applications, 2nd Edition)
  • Article
  • Open Access
1 Citations
927 Views
18 Pages

29 December 2025

The surface morphology of lithium metal electrodes evolves markedly during cycling, modulating interfacial kinetics and increasing the risk of dendrite-driven internal short circuits. Here, we infer this morphological evolution from direct-current (D...

(This article belongs to the Special Issue Advanced Energy Storage Technologies and Applications (AESAs), 2nd Edition)
  • Review
  • Open Access
249 Views
48 Pages

22 October 2026

Titanium anodization enables the formation of TiO2 nanotube (TNT) architectures with structural, physicochemical, mechanical, electrochemical, and biological characteristics relevant to dental implant surface engineering. This critical narrative revi...

(This article belongs to the Special Issue Dental Biomaterials and Implants: Latest Advances and Prospects)
  • Article
  • Open Access
1 Citations
2,517 Views
18 Pages

19 August 2023

The formation of nanostructured anodic titanium oxide (ATO) layers was explored on pure titanium by conventional anodizing under two different operating conditions to form nanotube and nanopore morphologies. The ATO layers were successfully developed...

(This article belongs to the Section Advanced Nanomaterials and Nanotechnology)
  • Article
  • Open Access
19 Citations
6,146 Views
17 Pages

Surface Modification of the Ti-6Al-4V Alloy by Anodic Oxidation and Its Effect on Osteoarticular Cell Proliferation

  • Itzel P. Torres-Avila,
  • Itzia I. Padilla-Martínez,
  • Nury Pérez-Hernández,
  • Angel E. Bañuelos-Hernández and ,
  • Julio C. Velázquez,
  • José L. Castrejón-Flores and
  • Enrique Hernández-Sánchez
  • + 2 authors+ 0 author

This investigation describes the formation of crystalline nanotubes of titanium oxide on the surface of a Ti-6Al-4V alloy and its biological evaluation. The formation of nanotubes was performed by the anodic oxidation technique with a constant work p...

(This article belongs to the Special Issue Bioactive Surfaces and Coatings for Bone Regeneration)
  • Article
  • Open Access
7 Citations
4,304 Views
16 Pages

21 August 2021

The evolution behavior of anode gas during aluminum electrolysis has been a hot spot of research for energy saving and process control. In the present work, the bubble evolution behavior during aluminum electrolysis was investigated using a lab-scale...

  • Article
  • Open Access
1 Citations
2,105 Views
16 Pages

Optimization of the Hard Anodizing Process in Acidic Baths on AA6063 Aluminum Alloy Using Response Surface Methodology

  • José Cabral-Miramontes,
  • Citlalli Gaona-Tiburcio,
  • Erick Maldonado-Bandala,
  • Lino Juarez-Alejandro and ,
  • Miguel Angel Baltazar-Zamora,
  • Francisco Estupiñan-Lopez,
  • Laura Landa-Ruiz,
  • Javier Olguin-Coca,
  • Luis Daimir Lopez-Leon and
  • Facundo Almeraya-Calderon
  • + 7 authors+ 2 authors

9 November 2025

The characteristics of aluminum alloys make them the most extensively used material in the aerospace sector. Aluminum, in a natural way, when interacting with oxygen, forms a protective layer of aluminum oxide, Al2O3, that enhances its properties, fo...

(This article belongs to the Section Corrosion, Wear and Erosion)
  • Article
  • Open Access
234 Citations
4,505 Views
10 Pages

Detection of Aflatoxin B1 Based on a Porous Anodized Aluminum Membrane Combined with Surface-Enhanced Raman Scattering Spectroscopy

  • Yanting Feng,
  • Lei He,
  • Ling Wang,
  • Rijian Mo and ,
  • Chunxia Zhou,
  • Pengzhi Hong and
  • Chengyong Li
  • + 2 authors+ 0 author

An Aflatoxin B1 (AFB1) biosensor was fabricated via an Ag nanoparticles assembly on the surface of a porous anodized aluminum (PAA) membrane. First, the Raman reporter 4-Aminothiophenol (4-ATP) and DNA (partially complementary to AFB1 aptamer) were a...

  • Feature Paper
  • Article
  • Open Access
510 Views
26 Pages

30 June 2026

This study provides a comprehensive characterization of carbon dust adhesion on the anode surface induced by the anode effect (AE) in the Hall–Héroult process. The primary objective was to verify the hypothesis of electrophoretic carbon...

(This article belongs to the Special Issue Advanced Surface Engineering: Mechanisms, Properties, and Applications)
  • Article
  • Open Access
3 Citations
2,839 Views
10 Pages

Voltage-Controlled Anodic Oxidation of Porous Fluorescent SiC for Effective Surface Passivation

  • Kosuke Yanai,
  • Weifang Lu,
  • Yoma Yamane,
  • Dong-Pyo Han and ,
  • Haiyan Ou,
  • Motoaki Iwaya,
  • Tetsuya Takeuchi,
  • Satoshi Kamiyama and
  • Isamu Akasaki
  • + 4 authors+ 0 author

21 October 2020

This study investigated the fabrication of porous fluorescent SiC using a constant voltage-controlled anodic oxidation process. The application of a high, constant voltage resulted in a spatial distinction between the porous structures formed inside...

  • Article
  • Open Access
23 Citations
9,311 Views
14 Pages

30 November 2015

A sensitive surface enhanced Raman scattering chemical sensor is demonstrated by using inexpensive gold-coated nanoporous anodic aluminum oxide substrates. To optimize the performance of the substrates for sensing by the Surface-enhanced Raman scatte...

(This article belongs to the Special Issue The Use of New and/or Improved Materials for Sensing Applications)
  • Article
  • Open Access
16 Citations
5,448 Views
11 Pages

30 June 2025

Sodium-ion batteries (SIBs) have been considered as a promising alternative to lithium-ion batteries (LIBs) for large-scale energy storage. However, the commercial graphite anode is not suitable for SIBs due to its low Na+ ion storage capability. Cur...

(This article belongs to the Collection Micro/Nanoscale Electrokinetics)
  • Article
  • Open Access
14 Citations
6,061 Views
11 Pages

Surface Modification Induces Oriented Zn(002) Deposition for Highly Stable Zinc Anode

  • Hongfei Zhang,
  • Fujie Li,
  • Zijin Li,
  • Liu Gao and ,
  • Binghui Xu and
  • Chao Wang
  • + 1 author+ 0 author

Aqueous zinc metal batteries (AZMBs) are considered a promising candidate for grid-scale energy storage systems owing to their high capacity, high safety and low cost. However, Zn anodes suffer from notorious dendrite growth and undesirable surface c...

(This article belongs to the Section Battery Materials and Interfaces: Anode, Cathode, Separators and Electrolytes or Others)
  • Article
  • Open Access
3 Citations
3,134 Views
12 Pages

Optimization of Electrical Intensity for Electrochemical Anodic Oxidation to Modify the Surface of Carbon Fibers and Preparation of Carbon Nanotubes/Carbon Fiber Multi-Scale Reinforcements

  • Mengfan Li,
  • Yanxiang Wang,
  • Bowen Cui,
  • Chengjuan Wang and ,
  • Hongxue Tan,
  • Haotian Jiang,
  • Zhenhao Xu,
  • Chengguo Wang and
  • Guangshan Zhuang
  • + 4 authors+ 0 author

18 December 2022

Carbon fiber (CF) reinforced composites are widely used due to their excellent properties. However, the smooth surface and few functional groups of CFs can lead to fiber fractures and pullout, which reduce the service life of the composites. The over...

(This article belongs to the Special Issue Carbon Fiber Composites, Volume II)
  • Feature Paper
  • Article
  • Open Access
26 Citations
14,033 Views
17 Pages

The Electrosome: A Surface-Displayed Enzymatic Cascade in a Biofuel Cell’s Anode and a High-Density Surface-Displayed Biocathodic Enzyme

  • Alon Szczupak,
  • Dror Aizik,
  • Sarah Moraïs,
  • Yael Vazana and ,
  • Yoav Barak,
  • Edward A. Bayer and
  • Lital Alfonta
  • + 2 authors+ 0 author

The limitation of surface-display systems in biofuel cells to a single redox enzyme is a major drawback of hybrid biofuel cells, resulting in a low copy-number of enzymes per yeast cell and a limitation in displaying enzymatic cascades. Here we prese...

  • Article
  • Open Access
16 Citations
3,806 Views
13 Pages

1 June 2021

Microbial fuel cells (MFCs) have attracted attention by directly converting the bioelectrochemical energy possessed by the organic materials that make up the biomass into electrical energy. In this study, the relationship between the biofilm formed o...

(This article belongs to the Special Issue Wood Polymer Composites: Modification, Processing and Characterization)
  • Article
  • Open Access
12 Citations
6,609 Views
12 Pages

A Dual Functional Artificial SEI Layer Based on a Facile Surface Chemistry for Stable Lithium Metal Anode

  • Yue Ma,
  • Feng Wu,
  • Nan Chen,
  • Tianyu Yang and ,
  • Yaohui Liang,
  • Zhaoyang Sun,
  • Guangqiu Luo,
  • Jianguo Du,
  • Yanxin Shang and
  • Renjie Chen
  • + 8 authors+ 3 authors

15 August 2022

Solid electrolyte interphase (SEI) on a Li anode is critical to the interface stability and cycle life of Li metal batteries. On the one hand, components of SEI with the passivation effect can effectively hinder the interfacial side reactions to prom...

(This article belongs to the Special Issue Li-Ion Battery Materials)
  • Article
  • Open Access
12 Citations
2,697 Views
23 Pages

14 June 2023

The direct methanol fuel cell (DMFC) has the potential for portable applications. However, it has some drawbacks that make commercialisation difficult owing to its poor kinetic oxidation efficiency and non-economic cost. To enhance the performance of...

(This article belongs to the Special Issue Catalytic Methods for the Synthesis of Carbon Nanodots and Their Applications)
  • Article
  • Open Access
3 Citations
2,116 Views
13 Pages

Revealing the Surface and In-Depth Operational Performances of Oxygen-Evolving Anode Coatings: A Guideline for the Synthesis of Inert Durable Anodes in Metal Electrowinning from Acid Solutions

  • Jovana Bošnjaković,
  • Vladimir Panić,
  • Maja Stevanović,
  • Srecko Stopic and ,
  • Jasmina Stevanović,
  • Branimir Grgur and
  • Gavrilo Šekularac
  • + 2 authors+ 0 author

26 November 2024

The electrochemical performances of an oxygen-evolving anode produced by the reactivation of waste Ti substrate by a typical IrO2-Ta2O5 coating are correlated to the textural (non)uniformities of the coating and its exhaustion state. Coating degradat...

(This article belongs to the Special Issue Feature Papers in Extractive Metallurgy)
  • Review
  • Open Access
21 Citations
10,797 Views
24 Pages

Surface Modification and Functional Structure Space Design to Improve the Cycle Stability of Silicon Based Materials as Anode of Lithium Ion Batteries

  • Fang Di,
  • Weimin Zhou,
  • Haiming Yang,
  • Chengguo Sun and ,
  • Xin Geng,
  • Yiqing Chen,
  • Lixiang Li,
  • Zunfeng Liu and
  • Baigang An
  • + 4 authors+ 0 author

30 August 2021

Silicon anode is considered as one of the candidates for graphite replacement due to its highest known theoretical capacity and abundant reserve on earth. However, poor cycling stability resulted from the “volume effect” in the continuous charge-disc...

(This article belongs to the Special Issue Surface Modification and Functionalization for Advanced Materials)
  • Article
  • Open Access
1 Citations
626 Views
19 Pages

Electrodeposition of copper on the surface of the high-carbon steel (HCS) cathode was carried out in situ during the electrolysis of an aqueous KOH solution with a copper anode. A mechanism was proposed for the transfer of the copper from the anode t...

(This article belongs to the Special Issue Structure and Component-Designed Functional Materials for Electrochemical Application)
  • Article
  • Open Access
16 Citations
3,680 Views
12 Pages

Surface Modification of Li3VO4 with PEDOT:PSS Conductive Polymer as an Anode Material for Li-Ion Capacitors

  • Shih-Chieh Hsu,
  • Kuan-Syun Wang,
  • Yan-Ting Lin,
  • Jen-Hsien Huang and ,
  • Nian-Jheng Wu,
  • Jia-Lin Kang,
  • Huei-Chu Weng and
  • Ting-Yu Liu
  • + 3 authors+ 0 author

29 May 2023

Li3VO4 (LVO) is a highly promising anode material for lithium-ion batteries, owing to its high capacity and stable discharge plateau. However, LVO faces a significant challenge due to its poor rate capability, which is mainly attributed to its low el...

(This article belongs to the Special Issue Polymer Materials for Energy Storage and Fuel Cells Applications)
  • Article
  • Open Access
31 Citations
5,409 Views
11 Pages

2 October 2019

The recent increased interest in the various applications of superhydrophobic surfaces necessitates investigating ways of how this property can be enhanced further. Thus, this study investigated how superhydrophobic properties can be enhanced through...

  • Article
  • Open Access
6 Citations
3,820 Views
9 Pages

Surface Modification of Electrocatalyst for Optimal Adsorption of Reactants in Oxygen Evolution Reaction

  • Hong Soo Kim,
  • Hwapyong Kim,
  • Monica Claire Flores,
  • Gyu-Seok Jung and
  • Su-Il In

9 June 2021

Technological development after the industrial revolution has improved the quality of human life, but global energy consumption continues to increase due to population growth and the development of fossil fuels. Therefore, numerous studies have been...

(This article belongs to the Special Issue Electrocatalysis and Electrode Materials for Energy Production)
  • Article
  • Open Access
2 Citations
2,663 Views
12 Pages

Chemical Structural Coherence Principle on Polymers for Better Adhesion

  • Alena L. Krapivko,
  • Yegor D. Ryabkov,
  • Fedor V. Drozdov,
  • Nikolay A. Yashtulov and ,
  • Nikolay K. Zaitsev and
  • Aziz M. Muzafarov
  • + 1 author+ 0 author

12 July 2022

Composite materials are the most variative type of materials employed in almost every task imaginable. In the present study, a synthesis of a novel perfluoroalkyltriethoxysilane is reported to be used in creating composites with polyhexafluoropropyle...

(This article belongs to the Special Issue Synthesis and Applications of Polymer-Based Nanocomposites)
  • Article
  • Open Access
20 Citations
5,106 Views
15 Pages

Enhanced Performance of Microbial Fuel Cells with Anodes from Ethylenediamine and Phenylenediamine Modified Graphite Felt

  • Egidijus Griškonis,
  • Arminas Ilginis,
  • Ilona Jonuškienė,
  • Laurencas Raslavičius and ,
  • Rolandas Jonynas and
  • Kristina Kantminienė
  • + 1 author+ 0 author

5 August 2020

A microbial fuel cell (MFC) is a promising renewable energy option, which enables the effective and sustainable harvesting of electrical power due to bacterial activity and, at the same time, can also treat wastewater and utilise organic wastes or re...

(This article belongs to the Section Energy Systems)
  • Article
  • Open Access
6 Citations
2,712 Views
13 Pages

Facile Synthesis of Multi-Channel Surface-Modified Amorphous Iron Oxide Nanospheres as High-Performance Anode Materials for Lithium-Ion Batteries

  • Shijin Yu,
  • Wenzhen Zhu,
  • Ying Wei,
  • Jiahao Tong and ,
  • Quanya Wei,
  • Tianrui Chen,
  • Xuannan He,
  • Dingwen Hu,
  • Cuiyun Li and
  • Hua Zhu
  • + 5 authors+ 0 author

18 August 2022

Based on the synergistic effect of ripening and hydrogen ion etching in a hydrothermal solution, a simple, facile, and low-cost new strategy was demonstrated to prepare multi-channel surface-modified amorphous Fe2O3 nanospheres as anodes for Li-ion b...

  • Article
  • Open Access
11 Citations
5,119 Views
18 Pages

Improvement of Polymer/Metal Adhesion Using Anodizing Treatment and 3D Printing Process

  • Seung Wan Ryu,
  • Dong Hyun Kim,
  • Wonhwa Lee,
  • Jin-Yong Hong and ,
  • Young-Pyo Jeon and
  • Jea Uk Lee
  • + 1 author+ 0 author

23 January 2025

Joining materials with different physicochemical properties presents significant challenges. This study investigates the one-step anodization of aluminum in a mixed phosphoric acid and hydrogen peroxide solution, followed by the direct injection mold...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
37 Citations
4,258 Views
17 Pages

Electrochemical Degradation of Industrial Dyes in Wastewater through the Dissolution of Aluminum Sacrificial Anode of Cu/Al Macro-Corrosion Galvanic Cell

  • Mateusz Łuba,
  • Tomasz Mikołajczyk,
  • Bogusław Pierożyński,
  • Lech Smoczyński and ,
  • Paweł Wojtacha and
  • Mateusz Kuczyński
  • + 1 author+ 0 author

8 September 2020

This paper reports on the process of industrial-type wastewater purification carried-out through continuous anodic dissolution of aluminum alloy sacrificial anode for artificially aerated Cu-Al alloy galvanic (macro-corrosion) cells and synthetically...

  • Article
  • Open Access
1 Citations
1,940 Views
21 Pages

Graphite Oxide and Reduced Graphite Oxide Models to Reveal the Contribution of Carbon Texture and Surface Chemistry to Hydrogen Storage and Li-Ion Battery Anode Performance

  • Anna Bulátkó,
  • Lakshmi Shiva Shankar,
  • Szilvia Klébert,
  • Attila Farkas and ,
  • Miklós Mohai,
  • György Sáfrán,
  • Róbert Kun and
  • Krisztina László
  • + 3 authors+ 0 author

23 December 2025

After being an indispensable intermediate in the oxidative exfoliation route towards graphene, graphene oxide has gained its deserved value in materials science for numerous applications, from catalysis, through energy storage and conversion, to sens...

(This article belongs to the Special Issue The 15th Anniversary of Nanomaterials–Surface Chemistry of Graphene and Graphene Oxide)
  • Article
  • Open Access
15 Citations
4,459 Views
15 Pages

18 January 2022

An oxide scale formed on the surface of metal anodes is crucial for determining the overall quality of molten salt electrolysis (MSE), particularly for the durability of the anode materials. However, the material properties of oxide scales are yet to...

(This article belongs to the Special Issue Advanced Properties of Engineering Thin Films and Materials)

of 49