Skip to Content

520 Results Found

  • Article
  • Open Access
100 Views
12 Pages

The Effectiveness of Cast Wedging in Reducing Angular Deformity in Paediatric Diaphyseal Tibial Fractures: A 20-Year Retrospective Case Series

  • Arash Ghoroghi,
  • Christopher M. B. Stewart,
  • Sirat Gandhi,
  • Charlotte V. E. Carpenter and ,
  • Sandeep Ghokale,
  • Zayd Jawad,
  • Simon Humphry and
  • Clare Carpenter
  • + 3 authors+ 0 author

13 November 2026

Background/Objectives: Cast wedging is a simple, non-operative technique for correcting residual angulation of a fractured limb held within a cast. Evidence quantifying how effectively it reduces angular deformity in paediatric diaphyseal tibial frac...

(This article belongs to the Special Issue Advances in Trauma and Orthopedic Surgery: 3rd Edition)
  • Article
  • Open Access
7 Citations
3,222 Views
14 Pages

Antegrade Intramedullary Femoral Lengthening and Distal Temporary Hemiepiphysiodesis for Combined Correction of Leg Length Discrepancy and Coronal Angular Deformity in Skeletally Immature Patients

  • Andrea Laufer,
  • Adrien Frommer,
  • Georg Gosheger,
  • Gregor Toporowski and ,
  • Jan Duedal Rölfing,
  • Carina Antfang,
  • Robert Roedl and
  • Bjoern Vogt
  • + 3 authors+ 0 author

21 April 2023

Leg length discrepancies (LLD) are frequently associated with coronal malalignment. Temporary hemiepiphysiodesis (HED) is a well-established procedure for the correction of limb malalignment in skeletally immature patients. For treatment of LLD >...

(This article belongs to the Special Issue Deformity Correction, Bone Lengthening and Correction Osteotomies of the Lower Limb)
  • Article
  • Open Access
19 Citations
5,740 Views
15 Pages

Soft Ionic Electroactive Polymer Actuators with Tunable Non-Linear Angular Deformation

  • Wangyujue Hong,
  • Abdallah Almomani,
  • Yuanfen Chen,
  • Reihaneh Jamshidi and
  • Reza Montazami

21 June 2017

The most rational approach to fabricate soft robotics is the implementation of soft actuators. Conventional soft electromechanical actuators exhibit linear or circular deformation, based on their design. This study presents the use of conjugated poly...

(This article belongs to the Section Advanced Materials Characterization)
  • Review
  • Open Access
13 Citations
4,169 Views
21 Pages

An Overview of Deformation Path Shapes on Equal Channel Angular Pressing

  • Erhan Baysal,
  • Oğuz Koçar,
  • Engin Kocaman and
  • Uğur Köklü

24 October 2022

In recent years, research on ultra-fine grain materials has gained attention. While attempts have been made to improve the properties of the material, it has also become increasingly important to decrease the costs. Studies on improving material prop...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
3 Citations
2,416 Views
24 Pages

12 June 2025

The rotor shaft is a critical component responsible for transmitting engine power to the helicopter’s rotor. Deformation of the rotor shaft can affect the meshing performance of the output stage gears in the main gearbox, thereby affecting load...

(This article belongs to the Section Machine Design and Theory)
  • Article
  • Open Access
5 Citations
2,718 Views
13 Pages

29 August 2022

Based on plasma kinetic theory, the dispersion and Landau damping of Langmuir and ion-acoustic waves carrying finite orbital angular momentum (OAM) were investigated in the κ-deformed Kaniadakis distributed plasma system. The results showed tha...

(This article belongs to the Special Issue Twenty Years of Kaniadakis Entropy: Current Trends and Future Perspectives)
  • Article
  • Open Access
17 Citations
6,226 Views
10 Pages

3 August 2017

Pure titanium was efficiently processed up to four passes at 420 °C by rotary-die equal-channel angular pressing (RD-ECAP). The deformation structure and mechanical properties of pure titanium with various RD-ECAP passes were subsequently investigate...

  • Article
  • Open Access
2 Citations
2,984 Views
17 Pages

17 January 2025

During the heat treatment process, bearing rings are subjected to drastic temperature variability and complex microstructural evolution, which result in deformation, high residual stresses, operational instability and a limited operating life. Howeve...

(This article belongs to the Section Material Processing Technology)
  • Feature Paper
  • Article
  • Open Access
5 Citations
3,295 Views
11 Pages

19 May 2020

Ultra-fine-grained (UFG) Cu shows little total elongation in tensile tests because simple shear deformation is concentrated in narrow regions during the initial stage of plastic deformation. Here, we attempted to improve the total elongation of UFG C...

  • Article
  • Open Access
2 Citations
2,327 Views
15 Pages

Microstructure and Mechanical Properties of Severely Deformed Polypropylene in ECAE (Equal Channel Angular Extrusion) via Routes A and C

  • Qifeng Jiang,
  • Ramdane Boulahia,
  • Fahmi Zaïri,
  • Iurii Vozniak and ,
  • Zhengwei Qu,
  • Jean-Michel Gloaguen and
  • Xiaobing Liu
  • + 2 authors+ 0 author

3 December 2022

Equal channel angular extrusion (ECAE) is a solid-state extrusion process for modifying microstructures via severe plastic deformation without modifying the specimen cross section. In this study, changes in the microstructure and mechanical propertie...

(This article belongs to the Special Issue Structure-Property Relationship of Polymer Materials)
  • Article
  • Open Access
12 Citations
3,788 Views
14 Pages

5 January 2021

To investigate the effect of equal channel angular pressing (ECAP) on the deformation of Ti-6Al-4V alloy at a higher temperature, hot compression tests were conducted on alloys having two different initial microstructures (the original alloy (Pre-ECA...

(This article belongs to the Special Issue Metal Forming: Processes and Analyses)
  • Article
  • Open Access
4 Citations
4,107 Views
16 Pages

16 December 2023

Cableways have been widely used in industrial areas, cities, and scenic spots due to their advantages, such as being a convenient mode of transportation, time-saving, labor-saving, and low cost, as well as offering environmental protection. To ensure...

(This article belongs to the Section Physical Sensors)
  • Review
  • Open Access
50 Views
47 Pages

17 November 2026

Background: Congenital vertebral displacement (CVD) differs from conventional angular kyphosis because adjacent spinal segments and the neural canal are displaced. This review examines neurological vulnerability and reconstructive decision-making, wi...

(This article belongs to the Section Neurosciences)
  • Article
  • Open Access
13 Citations
7,708 Views
13 Pages

Guided Growth Technique for Epiphysiodesis and Hemiepiphysiodesis: Safety and Performance Evaluation

  • Giovanni Luigi Di Gennaro,
  • Giovanni Trisolino,
  • Stefano Stallone,
  • Marco Ramella and ,
  • Gino Rocca and
  • Giovanni Gallone
  • + 1 author+ 0 author

29 December 2023

Background: Guided-growth modulation is a first-line treatment widely adopted to correct lower-limb angular deformities and limb-length discrepancies (LLD) in the paediatric population. Methods: We conducted a retrospective study to evaluate the safe...

(This article belongs to the Section Pediatric Orthopedics & Sports Medicine)
  • Article
  • Open Access
4 Citations
1,686 Views
13 Pages

2 November 2023

A relevant problem in the development and improvement of numeric analytical methods for the research of structures, buildings and construction is studying the stress–strain state of structures and construction with boundaries that have complex...

(This article belongs to the Section Mathematical Analysis)
  • Article
  • Open Access
578 Views
14 Pages

Scapular Alignment Restoration After Posterior Fixation of Displaced Scapular Fractures

  • Myung-Sub Lee,
  • Doo-Hyung Lee,
  • Jaeheon Lee,
  • Won-Tae Cho and ,
  • Seungyeob Sakong and
  • Wan-Sun Choi
  • + 1 author+ 0 author

9 July 2026

Background and Objectives: The surgical management of displaced scapular fractures remains controversial, particularly regarding the importance of restoring scapular alignment. This study evaluated radiologic restoration and clinical outcomes followi...

(This article belongs to the Special Issue Contemporary Management and Outcomes of Orthopedic Fractures)
  • Article
  • Open Access
9 Citations
3,525 Views
14 Pages

25 January 2020

This work attempts to process AlCu4MgSi (AW 2017A) alloy continuous ingots by means of the equal channel angular pressing (ECAP) method. The equal channel angular pressing (ECAP) technique has been widely investigated in recent years as the most prom...

(This article belongs to the Special Issue Progress in Plastic Deformation of Metals and Alloys)
  • Article
  • Open Access
6 Citations
5,152 Views
14 Pages

8 January 2019

In the traditional airborne distributed position and orientation system (DPOS) transfer alignment process, the coupling angle between the dynamic deformation and body angular motion is not estimated or compensated, which causes the process to have lo...

(This article belongs to the Special Issue Aerospace Sensors and Multisensor Systems)
  • Article
  • Open Access
22 Citations
4,123 Views
11 Pages

12 May 2019

Deformation of an as-rolled rare earth Mg-2Y-0.6Nd-0.6Zr alloy, at different temperatures, was carried out along the BC (90° anticlockwise rotation of the samples after each ECAP pass) route by equal channel angular pressing (ECAP). The effects o...

  • Article
  • Open Access
12 Citations
6,324 Views
17 Pages

15 November 2013

Shipboard is not an absolute rigid body. Many factors could cause deformations which lead to large errors of mounted devices, especially for the navigation systems. Such errors should be estimated and compensated effectively, or they will severely r...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
1 Citations
3,463 Views
9 Pages

Tibial Lengthening along Submuscular Plate with Simultaneous Acute Tibial Deformity Correction by High-Energy Osteotomy: A Comparative Study

  • Kuei-Yu Liu,
  • Kuan-Wen Wu,
  • Chia-Che Lee,
  • Sheng-Chieh Lin and ,
  • Ken N. Kuo and
  • Ting-Ming Wang
  • + 1 author+ 0 author

18 September 2022

Submuscular plating and osteotomy using power saw have shown the benefits in certain situations of limb lengthening. However, no previous studies combining both procedures have been conducted for acute tibial deformity correction and limb lengthening...

(This article belongs to the Topic Orthopaedic Diseases and Innovative Intervention Strategies)
  • Article
  • Open Access
3 Citations
3,848 Views
23 Pages

5 April 2019

To investigate the evolving characteristics of plastic deformation for the angular gravels that are used to construct subgrade bed, a laboratory model test is performed with cyclic load applying. Vertical deformation is measured in real time by displ...

(This article belongs to the Special Issue Bridge Dynamics)
  • Article
  • Open Access
19 Citations
7,362 Views
9 Pages

Comparison between Novice and Experienced Surgeons Performing Corrective Osteotomy with Patient-Specific Guides in Dogs Based on Resulting Position Accuracy

  • Yoon Ho Roh,
  • Cheong Woon Cho,
  • Chang Hun Ryu,
  • Je Hun Lee and ,
  • Seong Mok Jeong and
  • Hae Beom Lee
  • + 1 author+ 0 author

28 February 2021

Corrective osteotomy has been applied to realign and stabilize the bones of dogs with lameness. However, corrective osteotomy for angular deformities requires substantial surgical experience for planning and performing accurate osteotomy. Three-dimen...

  • Article
  • Open Access
5,001 Views
15 Pages

14 August 2025

The plastic deformation during equal-channel angular pressing (ECAP) can be affected by various material- and processing-related factors. For instance, the initial crystal orientation and grain size play an important role in determining the material...

(This article belongs to the Special Issue Preparation, Formation and Application of Light Alloys and Their Composites)
  • Article
  • Open Access
4 Citations
3,371 Views
10 Pages

Equal channel angular pressing (ECAP) has been shown to be a promising method for producing biocomposites from wood particles. However, severe plastic deformation during ECAP would cause considerable cracking when consolidation is carried out without...

  • Case Report
  • Open Access

Bilateral Thumb Longitudinal Epiphyseal Brackets Treated with Closing-Wedge Corrective Osteotomy and Physiolysis: A Case Report and Literature Review

  • Ahmad N. Boeisa,
  • Mohammad S. Alarbash,
  • Abdullah M. Alkhars,
  • Ali A. Alsakkak and
  • Mohammed Jassim Alhassan

20 November 2026

Background and Clinical Significance: A longitudinal epiphyseal bracket (delta phalanx) is a rare congenital abnormality in which the epiphysis extends longitudinally rather than transversely, restricting growth and producing angular deformity of the...

(This article belongs to the Section Orthopaedics/Rehabilitation/Physical Therapy)
  • Article
  • Open Access
938 Views
18 Pages

Gradient Microstructure of Ag–Cu Metastable Metal-Matrix Composite Processed by Complex Extrusion: A Preliminary Study

  • Pavel Lejček,
  • Drahomír Dvorský,
  • Orsolya Molnárová,
  • Filip Průša and ,
  • Stanislav Habr and
  • Angelina Strakošová
  • + 1 author+ 0 author

13 January 2026

Severe plastic deformation is an effective process to modify materials’ structures. In this work, its new modification entitled channel angular extrusion was applied to a metastable metal-matrix composite consisting of a Ag matrix and spherical...

(This article belongs to the Special Issue Microstructure and Characterization of Metal Matrix Composites)
  • Review
  • Open Access
18 Citations
3,668 Views
19 Pages

7 April 2020

The methods of severe plastic deformation (SPD) have gained attention within the last decades primarily owing to their ability to substantially refine the grains within metallic materials and, therefore, significantly enhance the properties. Among on...

(This article belongs to the Special Issue Mechanical Properties in Progressive Mechanically Processed Metallic Materials)
  • Review
  • Open Access
14 Citations
8,716 Views
15 Pages

1 February 2012

A deeper understanding of the mechanical behavior of ultra-fine (UF) and nanocrystalline (NC) grained metals is necessary with the growing interest in using UF and NC grained metals for structural applications. The cyclic deformation response and beh...

  • Feature Paper
  • Article
  • Open Access
17 Citations
8,929 Views
10 Pages

18 January 2018

Severe plastic deformation (SPD) can be used to generate ultra-fine grained microstructures and thus to increase the strength of many materials. Unfortunately, high strength aluminum alloys are generally hard to deform, which puts severe limits on th...

(This article belongs to the Special Issue Scientific and Engineering Progress on Aluminum-Based Light-Weight Materials: Research Reports from the German Collaborative Research Center 692)
  • Article
  • Open Access
17 Citations
4,358 Views
22 Pages

Coupling the Relationship between Land Subsidence and Groundwater Level, Ground Fissures in Xi’an City Using Multi-Orbit and Multi-Temporal InSAR

  • Xing Zhang,
  • Zhengfeng Cheng,
  • Bei Xu,
  • Rong Gui and ,
  • Jun Hu,
  • Changjiang Yang,
  • Qiuhong Yang and
  • Tao Xiong
  • + 3 authors+ 0 author

16 July 2023

The Xi’an region of China has been suffering from groundwater depletion, ground fissure hazards, and surface subsidence for a long time. Due to the complex tectonics and frequent human and natural activities, land deformation in the region is a...

(This article belongs to the Special Issue Monitoring and Modelling of Geological Disasters Based on InSAR Observations II)
  • Article
  • Open Access
1 Citations
847 Views
22 Pages

Influence of Twist Channel Angular Pressing Process on Microhardness and Microstructural Behavior of Explosively Welded Al/Cu Plates

  • Krzysztof Żaba,
  • Łukasz Kuczek,
  • Ilona Różycka,
  • Ondřej Hilšer and ,
  • Tomasz Trzepieciński and
  • Kinga Ortyl
  • + 1 author+ 0 author

12 January 2026

Due to their unique properties resulting from the combination of metals with different properties, bimetallic sheets are desirable in the energy, petrochemical, and shipbuilding industries. In this article, explosively welded EN AW-1050/Cu-ETP (Al/Cu...

(This article belongs to the Special Issue Welding, Joining, and Additive Manufacturing of Metals and Alloys (Third Edition))
  • Article
  • Open Access
1 Citations
1,118 Views
18 Pages

Using a Combination of ECAP and HE Processes to Produce Isotropic Ultrafine-Grained Titanium

  • Mariusz Kulczyk,
  • Jacek Skiba,
  • Sylwia Przybysz-Gloc,
  • Łukasz Maj and ,
  • Jakub Kawałko and
  • Monika Skorupska
  • + 1 author+ 0 author

15 November 2025

This paper proposes a complex plastic forming process for grade 2 titanium using a combination of severe plastic deformation techniques, equal-channel angular pressing (ECAP) and hydrostatic extrusion (HE). The aim of the combination of these methods...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
5 Citations
1,165 Views
22 Pages

Achieving Superplasticity in Ultrafine-Grained Mg-9Li Alloy via Dual-Phase Microstructure Optimization

  • Jiahao Xu,
  • Xinyue Gong,
  • Wanxiang Zhao,
  • Chao Sun and ,
  • Guibin Shan,
  • Huan Liu and
  • Dan Song
  • + 2 authors+ 0 author

9 May 2025

In this study, high toughness and superplastic deformability were achieved in Mg-9Li alloys through dual-phase microstructure optimization. Solid solution (SS) and equal channel angular pressing (ECAP) treatments were employed to refine the alloy&rsq...

  • Article
  • Open Access
4 Citations
1,254 Views
18 Pages

29 September 2025

This study examines the mechanical, thermal, and electrical properties of copper tool electrodes processed via Equal Channel Angular Pressing (ECAP), with a specific focus on their performance in Electrical Discharge Machining (EDM) applications. A n...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
18 Citations
3,944 Views
12 Pages

Texture Hardening Observed in Mg–Zn–Nd Alloy Processed by Equal-Channel Angular Pressing (ECAP)

  • Jitka Stráská,
  • Peter Minárik,
  • Stanislav Šašek,
  • Jozef Veselý and ,
  • Jan Bohlen,
  • Robert Král and
  • Jiří Kubásek
  • + 2 authors+ 0 author

24 December 2019

The addition of Nd significantly improves the mechanical properties of magnesium alloys. However, only limited amounts of Nd or other rare earth (RE) elements should be used due to their high price. In this study, a low-alloyed Mg–1% Zn–1...

(This article belongs to the Special Issue Severe Plastic Deformation and Thermomechanical Processing: Nanostructuring and Properties)
  • Article
  • Open Access
9 Citations
2,817 Views
17 Pages

Semi-Continuous Equal-Channel Angular Extrusion and Rolling of AA5083 and AZ31 Alloys

  • Vladimir Segal,
  • Svetlana V. Reznikov,
  • Nagendra Murching,
  • Vincent H. Hammond and
  • Laszlo J. Kecskes

24 September 2019

This paper describes a new modification of equal-channel angular extrusion for the “pass-by-pass” semi-continuous (sc-ECAE) processing of lightweight alloys. Sc-ECAE leads to a multifold increase in productivity and decrease in costs, pro...

  • Article
  • Open Access
7 Citations
2,569 Views
13 Pages

Strength and Fracture Mechanism of an Ultrafine-Grained Austenitic Steel for Medical Applications

  • Gennadiy V. Klevtsov,
  • Ruslan Z. Valiev,
  • Natal’ya A. Klevtsova,
  • Maxim N. Tyurkov and ,
  • Mikhail L. Linderov,
  • Marina M. Abramova,
  • Arseniy G. Raab and
  • Timur B. Minasov
  • + 3 authors+ 0 author

15 December 2021

In this paper, we study the corrosion-resistant austenitic steel Fe-0.02C-18Cr-8Ni for medical applications. The microstructure and mechanical properties (tensile mechanical properties, torsional strength, impact toughness, and static and cyclic crac...

(This article belongs to the Special Issue Functional Nanomaterials for Current and Prospective Medical Applications)
  • Article
  • Open Access
17 Citations
3,479 Views
14 Pages

The Effect of Casting Technique and Severe Straining on the Microstructure, Electrical Conductivity, Mechanical Properties and Thermal Stability of the Al–1.7 wt.% Fe Alloy

  • Andrey Medvedev,
  • Olga Zhukova,
  • Nariman Enikeev,
  • Vil Kazykhanov and ,
  • Victor Timofeev and
  • Maxim Murashkin
  • + 1 author+ 0 author

13 April 2023

This paper features the changes in microstructure and properties of an Al–Fe alloy produced by casting with different solidification rates followed by severe plastic deformation and rolling. Particularly, different states of the as-cast Al&ndas...

(This article belongs to the Special Issue Microstructure and Mechanical Properties of Structural Steels and Alloys)
  • Article
  • Open Access
130 Views
27 Pages

Nonlinear Dynamic Response of High-Speed Angular Contact Ball Bearings Considering Nonuniform Cage Thermal Deformation and Local Pocket Wear

  • Chunyi Yang,
  • Zinan Wang,
  • Shihe Zheng,
  • Haitao Xian and ,
  • Qingxin Han,
  • Qingyuan Wang and
  • Xiaochen Zhang
  • + 2 authors+ 0 author

22 October 2026

Cage pocket wear and thermal deformation can jointly alter ball–cage contact conditions in high-speed bearings. However, their coupled effects on nonlinear bearing dynamics remain insufficiently studied. A nonlinear dynamic model is developed t...

(This article belongs to the Section Friction and Tribology)
  • Article
  • Open Access
6 Citations
3,721 Views
13 Pages

24 June 2021

We investigated the effectiveness of severe plastic deformation by equal channel angular extrusion (ECAE) for consolidation of metal powders into metal matrix composites. Equal volumes of copper (Cu) and tantalum (Ta) powders were consolidated at amb...

  • Article
  • Open Access
13 Citations
5,689 Views
8 Pages

Microstructure Evolution in High Purity Aluminum Single Crystal Processed by Equal Channel Angular Pressing (ECAP)

  • Jinfang Dong,
  • Qing Dong,
  • Yongbing Dai,
  • Hui Xing and ,
  • Yanfeng Han,
  • Jianbo Ma,
  • Jiao Zhang,
  • Jun Wang and
  • Baode Sun
  • + 4 authors+ 0 author

22 January 2017

Aluminum single crystal with 99.999% purity was deformed at room temperature by equal channel angular pressing (ECAP) up to 16 passes. Grain size and misorientation of processed samples were quantitatively characterized by TEM and EBSD. The results s...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
1 Citations
859 Views
22 Pages

6 April 2025

As a generalization of the symmetry of the stress tensor of continuum mechanics, the paper investigates symmetry properties arising in models of magneto- and electro-mechanical interaction. First, the balance of angular momentum is considered, thus o...

(This article belongs to the Section B: Mathematics)
  • Article
  • Open Access
2 Citations
2,311 Views
14 Pages

FEM Method Study of the Advanced ECAP Die Channel and Tool Design

  • Alexandr Arbuz,
  • Nikita Lutchenko and
  • Rozina Yordanova

25 February 2025

Equal-channel angular pressing (ECAP) is one of the most effective methods for obtaining ultrafine-grained structures in metals and alloys, significantly improving their mechanical properties. In this work, FEM modeling and development of a new desig...

(This article belongs to the Special Issue Finite Element Simulation and Analysis)
  • Article
  • Open Access
464 Views
15 Pages

Effects of ECAP Processing Temperature and Number of Passes on the Mechanical Behavior of CuAg0.1 Alloy

  • Ebubekir Atan,
  • Mustafa Rasheed,
  • Mustafa Öncül,
  • Orhan Akyüz and
  • Mücahit Sütçü

5 August 2026

This study investigates the effect of equal channel angular pressing (ECAP) temperature and pass number on the microstructural evolution and hardness response of a CuAg0.1 alloy. ECAP was performed by using route Bc at room temperature and 100 °C...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Communication
  • Open Access
1 Citations
1,356 Views
7 Pages

Optimizing Thermomechanical Processing for Producing Bulk Fine-Grained Aluminum Alloy with Thermal Stability

  • Jesada Punyafu,
  • Chonlada Domrong,
  • Ussadawut Patakham,
  • Mitsuhiro Murayama and
  • Chaiyasit Banjongprasert

5 September 2025

This study investigates the thermal stability of fine-grained structures achieved through different severe plastic deformation (SPD) and heat treatment paths. Bulk fine-grained Al-0.1Sc-0.1Zr (wt%) alloy was produced via equal channel angular pressin...

(This article belongs to the Special Issue Advances in Thermomechanical Processing and Additive Manufacturing of Engineering Alloys)
  • Review
  • Open Access
4 Citations
3,889 Views
25 Pages

Intraoperative Angle Measurement of Anatomical Structures: A Systematic Review

  • João Cruz,
  • Sérgio B. Gonçalves,
  • Manuel Cassiano Neves,
  • Hugo Plácido Silva and
  • Miguel Tavares Silva

1 March 2024

Ensuring precise angle measurement during surgical correction of orientation-related deformities is crucial for optimal postoperative outcomes, yet there is a lack of an ideal commercial solution. Current measurement sensors and instrumentation have...

(This article belongs to the Collection Biomedical Imaging and Sensing)
  • Article
  • Open Access
14 Citations
4,629 Views
16 Pages

Assessment the Partial Welding Influences on Fatigue Life of S700MC Steel Fillet Welds

  • Jaromir Moravec,
  • Jiri Sobotka,
  • Iva Novakova and
  • Sarka Bukovska

16 February 2021

Fine-grained steels belonging to the HSLA group (High-Strength Low-Alloy steels) of steels are becoming increasingly popular and are used in both statically and dynamically stressed structures. Due to the method of their production, and thus also the...

(This article belongs to the Special Issue Fatigue Limit of Metals)
  • Article
  • Open Access
17 Citations
24,103 Views
8 Pages

The Comparison of Lower Extremity Length and Angle between Computed Radiography-Based Teleoroentgenogram and EOS® Imaging System

  • Kwang-Rak Park,
  • Jae-Ho Lee,
  • Dae-Soo Kim,
  • Ho Ryu and ,
  • Jaeho Kim,
  • Chang-Jin Yon and
  • Si-Wook Lee
  • + 2 authors+ 0 author

Background and objectives: The differences between computed radiography-based teleoroentgenograms (CR-based teleoroentgenograms) and an EOS® imaging system were evaluated by measuring lower extremity lengths and alignments. Materials and methods:...

(This article belongs to the Section Medical Imaging and Theranostics)
  • Article
  • Open Access
11 Citations
3,038 Views
24 Pages

2 January 2025

A novel hybrid Severe Plastic Deformation (SPD) method called Vortex Extrusion–Equal-Channel Angular Pressing (Vo-CAP) was developed and applied to AA6082 workpieces in this study. Before experimental application, a comprehensive optimization o...

(This article belongs to the Section Materials Science and Engineering)

of 11