- Article
Thermal conductivity (k) of polymers is usually limited to low values of ~0.5 Wm−1K−1 in comparison to metals (>20 Wm−1K−1). The goal of this work is to enhance thermal conductivity (k) of polyethylene–graphene nanoco...
Thermal conductivity (k) of polymers is usually limited to low values of ~0.5 Wm−1K−1 in comparison to metals (>20 Wm−1K−1). The goal of this work is to enhance thermal conductivity (k) of polyethylene–graphene nanoco...
The alignment of nanowires (NWs) has been actively pursued for the production of electrical devices with high-operating performances. Among the generally available alignment processes, spin-coating is the simplest and fastest method for uniformly pat...
In order to study the effect of temperature on the alignment of a long-span special track bridge, this paper provides a theoretical basis and technical support for bridge design, construction and later operation. This research established the section...
In this paper, we propose a scheme based on the spin Hall effect of light (SHEL) for characterizing aligned polymers. Poly (3-hexylthiophene) (P3HT) films were prepared via the solution shear coating method. The experimental results obtained by using...
In three experiments, we examined, using a perceptual task, the difficulties of spatial perspective taking. Participants imagined adopting perspectives around a table and pointed from them towards the positions of a target. Depending on the condition...
Conjugated polymers have emerged as promising materials for next-generation electronics. However, in spite of having several advantages, such as a low cost, large area processability and flexibility, polymer-based electronics have their own limitatio...
This study aimed to explore students’ effectiveness in scientific courses that have adopted the framework of constructive alignment. The researchers conducted an experimental study in the education sector to compare two different teaching model...
Orthodontic treatment increasingly involves transparent aligners; however, biomechanical analysis of their treatment effects under clinical conditions is lacking. We compared the biomechanical efficacy and effectiveness of orthodontic treatment with...
Objectives: This study aimed to evaluate the effectiveness of a novel hybrid aligner system, Geniova Technologies™ (GT), for arch expansion and to compare the predictability of its virtual setup with a conventional clear aligner system (CA) aft...
Background/Objectives: Maxillary molar distalization is a commonly used orthodontic approach for correcting dentoalveolar Class II malocclusions. However, the predictability of such movements when performed with clear aligners remains uncertain. This...
Background: The attainment of precise posterior occlusion alignment necessitates a deeper understanding of the clinical efficacy of aligner therapy. This study aims to determine whether the treatment goals defined in the virtual planning of aligner t...
Background/Objectives: Clear aligners are increasingly prescribed for orthodontic treatment, primarily in adult patients; however, concerns have been raised that this treatment approach may negatively impact root length, especially in endodontically...
The dynamics of active particles are increasingly being leveraged to design and control micro-robotic swarms. Local interactions play a crucial role in the phase transitions of active particles; how the combined effects of alignment, short-range repu...
The spin alignment of vector mesons, characterized by the spin-density-matrix element
The Y-shape (triangular) semi-submersible foundation has been adopted by most of the built full-scale floating wind turbines, such as Windfloat, Fukushima Mirai and Shimpuu. Considering the non-fully-symmetrical shape and met-ocean condition, the fou...
Highly aligned multi-walled carbon nanotube (MWCNT) polymer composites were fabricated via a roll-to-roll milling process; the alignment of the MWCNTs could be controlled by varying the speed of the rotating rolls. The effect of MWCNT alignment on th...
Additive manufacturing by material extrusion such as the widespread fused filament fabrication is able to improve 3D printed part performance by using short fiber reinforced composite materials. Fiber alignment is critical for the exploitation of the...
Debate remains regarding the utility of mechanical axis alignment as a predictor of durability after total knee arthroplasty (TKA). Our study aimed to assess the effects of coronal alignment on implant durability, clinical outcomes, and radiographic...
7 November 2019
In this study, we designed a backpack that can reduce the moment arm of backpack load by placing the center of gravity of the backpack close to the axis of the spine. In order to investigate the effect of sagittal spinal alignment compared with the g...
3 September 2020
The present study examined the influence of a customized mouthguard on body alignment and balance performance in professional basketball players. Twenty-three professional male basketball players, aged 25.8 ± 8.6 years old, were voluntarily as...
In forest operations, the interface between forest companies and harvesting contractors is of special importance, considering that it is the first link in the forest industry’s supply chains. Supply operations account for a significant share of the f...
Innovations in material properties of goaltender skates have improved the protective characteristics of the boot, leading to redesign of the blade holder to resemble players’ holders. The redesigned blade holder introduces the ability to custom...
Background/Objectives: Eccentric loading during landing is considered a key factor in the development of patellar tendinopathy and is associated with stiff landings and patellar tendinopathy. This study aims to investigate the relationship between te...
This study aimed to assess the effect of a combined exercise program on lower-extremity alignment and knee pain in patients with genu varum. Forty-seven middle-aged women with knee pain and genu varum were randomly divided into the exercise (EG, n =...
Electrospun fibrous substrates mimicking extracellular matrices can be prepared by electrospinning, yielding aligned fibrous matrices as internal fillers to manufacture artificial nerves. Gelatin aligned nano-fibers were prepared by electrospinning a...
Human-exoskeleton misalignment could lead to permanent damages upon the targeted limb with long-term use in rehabilitation. Hence, achieving proper alignment is necessary to ensure patient safety and an effective rehabilitative journey. In this study...
29 August 2022
Externally focused attention is known to induce superior results in the movement outcome, whereas focusing attention on the moving body (internal focus) causes conscious control and constrains action. The study investigated effects on knee trajectory...
The Continuation Argument, a newly emerging perspective on language acquisition, requires further exploration to deepen our understanding of how continuation-based tasks facilitate foreign language learning. This study examines the use of observable...
The growing popularity of solution blow spinning as a method for the production of fibrous tissue engineering scaffolds and the vast range of polymer–solvent systems available for the method raises the need to study the effect of processing condition...
As the electric vehicle (EV) market continues to grow, wireless charging technologies are constantly evolving. Considering the limitations of traditional charging methods, the adoption of wireless charging technology is an essential strategy, and the...
Based on stochastic modeling of Coriolis vibration gyros by the Allan variance technique, this paper discusses Angle Random Walk (ARW), Rate Random Walk (RRW) and Markov process gyroscope noises which have significant impacts on the North-finding acc...
The alignment-dependent atomic model for treating electron transfer processes in ion-molecule collisions [Shingal and Lin, Phys. Rev. 1989, A40, 1302] is reviewed. This model has been applied to collisions between H+ and He2+ with H2, and recently al...
The Invisalign® system (SmartForce® G8) aims to guarantee aesthetics and provide good orthodontic treatment results. Dentoalveolar expansion is possible with clear aligners and can be used to correct dentoalveolar crossbite, resolve crowding...
2 March 2023
Background: In recent years the burden of aligner treatment has been growing. However, the sole use of aligners is characterized by limitations; thus attachments are bonded to the teeth to improve aligner retention and tooth movement. Nevertheless, i...
Due to inter-modal effects hidden in multi-modalities and the impact of weak modalities on multi-modal entity alignment, a Multi-modal Entity Alignment Method with Inter-modal Enhancement (MEAIE) is proposed. This method introduces a unique modality...
Background: The present study aimed to identify the differences between experiences, in terms of oral health-related quality of life, pain, side effects and/or other complications, of adults undergoing orthodontic treatment using removable aligners a...
Magnetorheological elastomer (MRE) consists of magnetic particles known as carbonyl iron (CIPs), which have been locked in a silicone-based matrix, in various alignments. However, current MRE exhibits inadequate rheological properties due to several...
As firms increasingly rely on external partnerships to navigate complex and volatile environments, understanding the distinct pathways through which such collaborations may relate to resilience has become essential. However, despite growing interest...
High-precision GPS data processing on Bernese has been employed to routinely resolve daily position solutions of GPS stations in the Crustal Movement Observation Network of China (CMONOC). The rank-deficient problems of the normal equation (NEQ) syst...
The precision of two-dimensional angular sensing is crucial for applications such as navigation, robotics, and optical alignment. Conventional methods often struggle to balance precision, dynamic range, and affordability. We introduce a novel method...
The permanent memory effect in polymer-dispersed liquid crystal systems imparts unique properties to these devices, making them well-suited for digital memory applications. By investigating the impact of homogeneous alignment layer types on this effe...
In this study, magnetorheological elastomer (MRE) was fabricated using an electromagnetic device with a new configuration mold at the orientation of 0°, 45° and 90°. This new curing concept enhanced the alignment of carbonyl iron particles (CIPs) wit...
Large language models (LLMs) increasingly serve as decision-support systems across linguistically diverse populations, yet whether they reason consistently across languages remains underexplored. We investigate whether LLMs exhibit language-dependent...
The role of family owners in the internal control environment is characterized by contradictory theoretical arguments i.e., entrenchment and alignment behavior. Therefore, the objective of this study is to investigate the behavior exhibited by family...
Background: Gymnasts are reported as a population at high risk of low back pain. The prevention and treatment of low back pain often rely on improving the effectiveness of deep stabilizer muscles through exercises that aim to reach spinal alignment a...
We report a significant enhancement in the electrical transport and photoconductivity of ZnO/ZnS core/shell nanowires (NWs) compared to those of ZnO NWs via the application of compressive strain. Under a compressive strain of −0.15%, the output...
10 September 2026
Buying online has become ordinary behaviour for European consumers, yet selling online remains a minority practice among small and medium-sized enterprises (SMEs). This study asks whether the two have developed in step within countries. Using Eurosta...
Because of the harsh polar environment, the master strapdown inertial navigation system (SINS) has low accuracy and the system model information becomes abnormal. In this case, existing polar transfer alignment (TA) algorithms which use the measureme...
This study focuses on a musculoskeletal analysis of human lower extremity and associated muscle forces during different rehabilitative tasks and exoskeleton alignment models. By changing the size and orientation of the impairment levels that could be...
The influence of topological entropy (TS) on the effective transport coefficient (ETC) of a two-phase material is analyzed. The proposed methodology studies a system of aligned bars that evolves into a stochastic heterogeneous system. This proposal u...
of 280