In this study, an ordered Ag/TiO2/Ni nanopillar arrays hybrid substrate was designed, and the charge transfer (CT) process at the metal–semiconductor and substrate–molecule interface was investigated based on the surface-enhanced Raman sc...
As a promising functional material, ferroelectric Pb(ZrxTi1−x)O3 (PZT) are widely used in many optical and electronic devices. Remarkably, as the film thickness decreases, the materials’ properties deviate gradually from those of solid ma...
Perovskite is attracting considerable interest because of its excellent semiconducting properties and optoelectronic performance. In particular, lead perovskites have been used extensively in photovoltaic, photodetectors, thin-film transistors, and v...
TiO2/Ag bilayer films sputtered onto a 2D polystyrene (PS) bead array in a magnetron sputtering system were found to form a nanocap-shaped nanostructure composed of a TiO2-Ag composite on each PS bead, in which the Ag nanoparticles were trapped parti...
We investigated the effect of film thickness d on the acoustic response of titanium dioxide (TiO2) layers deposited on Ti, SiO2, Al2O3, and Si substrates. For each TiO2 thickness–substrate pair, we computed reflection coefficients and acoustic...
Analyte sensitivity for gas sensors based on semiconducting metal oxides should be highly dependent on the film thickness, particularly when that thickness is on the order of the Debye length. This thickness dependence has previously been demonstrate...
Various thicknesses of TiO2 films were prepared by the sol–gel method and spin-coating process. These prepared TiO2 films exhibit thickness-dependent photoelectrochemical performance. The 1.09-μm-thickTiO2 film with 20 spin-coating layers (T...
A series of Al2O3–Al2TiO5 ceramic composites with different Al2TiO5 contents (10 and 40 vol.%) fabricated at different sintering temperatures (1450 and 1550 °C) was studied in the present work. The microstructure, crystallite structure, and...
ZnO has prominent electron transport and optical properties, beneficial for photovoltaic application, but its surface is prone to the formation of defects. To overcome this problem, we deposited nanostructured TiO2 thin film on ZnO nanorods to form a...
Perovskite solar cells (PSCs) have achieved tremendous success within just a decade. This success is critically dependent upon compositional engineering, morphology control of perovskite layer, or contingent upon high-temperature annealed mesoporous...
Among all transition metal oxides, titanium dioxide (TiO2) is one of the most intensively investigated materials due to its large range of applications, both in the amorphous and crystalline forms. We have produced amorphous TiO2 thin films by means...
In this study, TiO2-P25 films on FTO substrates were synthesized using the sol-gel process and studied using Variable Angle Spectroscopy Ellipsometry (VASE) to determine their optical constants and thickness. The measurements were carried out at room...
Research into methods for regulating the biocorrosion rate of biodegradable magnesium implants is one of the most urgent tasks in the field of biomedical materials science. Atomic layer deposition (ALD) is a highly effective method for the preparatio...
The optical properties of 5wt% Fe3O4-TiO2 thin films were evaluated in detail with the aim of proposing a mechanism for solar photocatalytic processes and highlighting the advantages over the use of bare TiO2. The results showed that the incorporatio...
High-density phases of TiO2, such as rutile and high-pressure TiO2-II, have attracted interest as materials with high dielectric constant and refractive index values, while combinations of TiO2-II with anatase and rutile have been considered promisin...
The formation of Ag nanoparticles on the surface of TiO2 (AgNP/TiO2) to enhance photocatalytic efficiency was studied. The Ag nanoparticles (AgNP) size, form, and distribution dependence on the initial thickness of Ag thin films, annealing temperatur...
Titanium dioxide (TiO2) thin films are used for a broad range of applications such as wastewater treatment, photocatalytic degradation activity, water splitting, antibacterial and also in biomedical applications. There is a wide range of synthesis te...
In the present work, highly ordered titanium dioxide (TiO2) nanotube anodes were grown using a rapid anodization process. The photoelectrochemical performances of these electrodes strongly depend on the anodization conditions. Parameters such as elec...
This work presents the implementation of ultrathin TiO2 films, deposited at room temperature by radio-frequency magnetron sputtering, as electron-selective contacts in silicon heterojunction solar cells. The effect of the working pressure on the prop...
This study aims to demonstrate the feasibility of applying eight machine learning algorithms to predict the classification of the surface characteristics of titanium oxide (TiO2) nanostructures with different anodization processes. We produced a tota...
In this study, a highly-ordered TiO2 nanotube array was successfully fabricated on the surface of a pure titanium foil using the anodization method, and a hydroxyapatite (HA) layer was electrochemically deposited on the vertically aligned titania (Ti...
The electrical and chemical properties of the titanium dioxide (TiO2) coated spirals grown by the atomic layer deposition (ALD) technique in two different temperatures of 150 °C and 300 °C are studied. The thickness of the TiO2 layers studied...
100 nm thick TiO2/TiN bilayers with varying thickness ratios were deposited via reactive sputtering of a Ti target in controlled oxygen and nitrogen atmospheres. Post-deposition annealing in air at 600 °C was performed to induce nitrogen diffusio...
The electron transport layer (ETL) plays a crucial role in solar cell technology, particularly in perovskite solar cells (PSCs), where nanostructured TiO2 films have been investigated as superior ETLs compared to compact TiO2. In this study, we explo...
A porous TiO2 layer was prepared with the plasma electrolytic oxidation (PEO) of Ti. In a further step, Pd was deposited on the TiO2 surface layer using the adsorption method. The activity of the Pd/TiO2/Ti catalyst was investigated during the oxidat...
The traditional use of TiO2 powder as a photocatalyst for degradation of organic compounds has several post-degradation treatment problems, such as filtration, precipitation, etc. A novel method was developed to immobilize TiO2 to minimize/eliminat...
Transparent conducting oxides and electron transport layers are central to optoelectronic devices, yet their interfacial electronic behavior remains strongly dependent on substrate chemistry, defect states, and surface potential alignment. Here, we c...
Dielectric properties and structure of 0.015Yb2O3-xMgO doped 0.92BaTiO3-0.08(Na0.5Bi0.5)TiO3 ceramics with x = 0.0–0.025 have been investigated. As Yb2O3-MgO was added into the BT-NBT, the phase changes from tetragonal to pseudo-cubic, with the tetra...
In this study, we have investigated heterostructural TiO2/BiVO4 anodes to determine the effect of the amount and form of BiVO4 nanoparticles on TiO2 on the response of photoanodes under UV and visible illumination. BiVO4 nanopowders were prepared and...
Considering that consolidant products are commonly used in the cultural heritage field and the titanium oxide nanoparticles (TiO2) have been used to develop photocatalyst films to induce self-cleaning property, the scientific research on consolidants...
Predicting the interfacial thermal resistance (ITR) for various material systems is a time-consuming process. In this study, we applied our previously proposed ITR machine learning models to discover the material systems that satisfy both high transp...
Highly oriented and self-ordered titanium-niobium-iron mixed oxide nanotubes were synthesized by anodizing Ti10NbxFe alloys in ethylene glycol electrolytes containing NH4F and water at 20 °C. The nanostructure morphologies were found to depend closel...
BaLa2Ti3O10 ceramics for thermal barrier coating (TBC) applications were fabricated, and exposed to V2O5 and Na2SO4 + V2O5 molten salts at 900 °C to investigate the hot corrosion behavior. After 4 h corrosion tests, the main reaction products res...
The aim of this study is to prove that resistive heating enables the synthesis of metal/metal oxide composites in the form of core–shell structures. The thickness and morphology of the oxide layer depends strongly on the nature of the metal, bu...
The chemical binding of photocatalytic materials, such as TiO2 and ZnO nanoparticles, onto porous polymer membranes requires a series of chemical reactions and long purification processes, which often result in small amounts of trapped nanoparticles...
The research focused on materials having potential applications in technology of planar evanescent wave sensors. Four samples of binary SiO2:TiO2 thin films having different titania content were manufactured through the sol-gel method and dip-coating...
Titanium dioxide coatings (TiO2) were sprayed using a water-stabilized plasma gun (WSP) to form robust self-supporting bodies with the character of a ceramic disc capacitor (CDC). Agglomerated nanometric powder was used as feedstock. Argon was applie...
We report on the fabrication of dye-sensitized solar cells with a TiO2 buffer layer between the transparent conductive oxide substrate and the mesoporous TiO2 film, in order to improve the photovoltaic conversion efficiency of the device. The buffer...
This study examines the intrinsic optical enhancements of carbon fiber-reinforced polymers (CFRPs) achieved through the integration of magnesium oxide (MgO) nanoparticles, as well as Mg/MgO and titanium dioxide (TiO2) thin films onto carbon fibers. I...
Improvements to unsteady pressure-sensitive paint (uPSP) formulations have been realized by judicious selection of titanium dioxide (TiO2) particles and dispersant. Traditionally, uPSP formulations based on polymer/ceramic coating have been used in m...
Li+ ion conducting Li3PO4 thin film electrolytes with thickness 300nm, 650nm and1.2μm were deposited on Al2O3 substrate at room temperature by thermal evaporation method.Reference and sensing electrodes were printed on Au interfaces by conventional s...
The aim of this study was to investigate the photoactivity of dioxide titanium (TiO2) nanotube films depending on different structure factors including pore size, tube length, tube wall thickness and crystallinity. Aqueous p-nitroaniline was used as...
The effect of an ultrathin TiO2 capping layer on an anatase Ti0.95Co0.05O2−δ (001) epitaxial thin film on magnetism at 300 K was investigated. Films with a capping layer showed increased magnetization mainly caused by enhanced out-of-plane magnetizat...
In recent years, organo-halide perovskite solar cells have garnered a surge of interest due to their high performance and low-cost fabrication processing. Owing to the multilayer architecture of perovskite solar cells, interface not only has a pivota...
Hydrothermally grown TiO2 nanorods are a key material for several electronic applications. Due to its anisotropic crystal structure, the electronic properties of this semiconductor depend on the crystallographic direction. Consequently, it is importa...
To study the distance-dependent electromagnetic field effects related to the enhancement and quenching mechanism of surface-enhanced Raman scattering (SERS) or fluorescence, it is essential to precisely control the distance from the surface of the me...
The environmental impact of industrial technologies and related remediation methods are major research trend lines. Unfortunately, in the development of materials for wastewater treatment or air purification, hazardous reactants are often employed, r...
Photoconversion processes such as electron injection (photooxidation) and dye regeneration (reduction) in dye-sensitized solar cells (DSSCs) occur at considerably inhomogeneous semiconductor/dye/electrolyte interfaces, implying a very high heterogene...
Artificial neural networks, as a game-changer to break up the bottleneck of classical von Neumann architectures, have attracted great interest recently. As a unit of artificial neural networks, memristive devices play a key role due to their similari...
Ultra-thin metallic films are widely applied in optics and microelectronics. However, their properties differ significantly from the bulk material and depend on the substrate material. The nucleation, film growth, and layer properties of atomic layer...
of 3