- Article
This paper presents a data-based Takagi-Sugeno (T–S) fuzzy modeling approach for aircraft engines in the flight envelope. We propose a series of T–S fuzzy models for engines with flight conditions as premises and engine linear dynamic mod...
This paper presents a data-based Takagi-Sugeno (T–S) fuzzy modeling approach for aircraft engines in the flight envelope. We propose a series of T–S fuzzy models for engines with flight conditions as premises and engine linear dynamic mod...
Piezoelectric actuators (PEAs) have been widely used in aerospace, electronic communication and other high-accuracy manufacturing fields because of their high precision, low power consumption, fast response, and high resolution. However, piezoelectri...
Bi-directional DC-AC converters are widely used in the field of electric vehicle-to-grid. However, the inductance of the grid-side interface filter is affected by the length of the grid connection and the power level, which presents nonlinear charact...
This paper studies the problem of the finite-time
With the fast development of artificial intelligence techniques, data-driven modeling approaches are becoming hotspots in both academic research and engineering practice. This paper proposes a novel data-driven T-S fuzzy model to precisely describe t...
Existing vehicle-road models used for road tracking do not take into account the side slip angle, which leads to a reduction in road tracking accuracy in scenarios where the vehicle is at a large side slip angle, such as an emergency lane change. Con...
This paper investigates a fault-tolerant control problem for the dynamic positioning of unmanned marine vehicles based on a Takagi–Sugeno (T-S) fuzzy model using an integral sliding mode scheme. First, the T-S fuzzy model of an unmanned marine...
In this paper, a mathematical model based on the T-S fuzzy model is proposed to solve the fault estimation (FE) and fault-tolerant control (FTC) problem for singular nonlinear time-varying delay (TVD) systems with sensor fault. TVD is is extremely di...
Voltage source converter-based–high voltage direct current (VSC-HVDC) systems exhibit strong nonlinear characteristics that dominate their dynamic behavior under large disturbances, making large-signal stability assessment essential for secure...
Continuous stirring tank reactors are widely used in the chemical production process, which is always accompanied by nonlinearity, time delay, and uncertainty. Considering the characteristic of the actual reaction of the continuous stirring tank reac...
This paper addresses integral sliding mode output feedback fault-tolerant control (FTC) of unmanned marine vessels (UMVs) with unknown premise variables and actuator faults. Due to the complexity of the marine environment, the presence of uncertainti...
This paper presents a study on the modeling and control of an aero-engine within the full flight envelope using the Takagi–Sugeno (T-S) fuzzy theory. A highly accurate aero-engine small deviation state variable model (SVM) was developed using t...
This paper deals with a methodical design approach of fault-tolerant controller that gives assurance for the the stabilization and acceptable control performance of the nonlinear systems which can be described by Takagi–Sugeno (T–S) fuzzy...
In recent years, applications of inverse model-based control techniques have experienced significant growth in popularity and have been widely used in engineering applications, mainly in nonlinear control system design problems. In this study, a nove...
In many practical systems, stochastic behaviors usually occur and need to be considered in the controller design. To ensure the system performance under the effect of stochastic behaviors, the controller may become bigger even beyond the capacity of...
In this paper, a Takagi–Sugeno fuzzy parallel distributed compensation control (TS-PDCC) is proposed for low-frequency oscillation (LFO) suppression in wind energy-penetrated power systems. Firstly, the fuzzy C-mean algorithm (FCMA) is applied...
Robust control techniques for power converters are becoming more attractive because they can meet with most demanding control goals like uncertainties. In this sense, the Takagi-Sugeno (T-S) fuzzy controller based on linear matrix inequalities (LMI)...
In this paper, we propose a novel fuzzy expectation maximization (FEM) based Takagi-Sugeno (T-S) fuzzy particle filtering (FEMTS-PF) algorithm for a passive sensor system. In order to incorporate target spatial-temporal information into particle filt...
Generally, the continuous and discrete TS fuzzy systems’ control is studied independently. Unlike the discrete systems, stability results for the continuous systems suffer from conservatism because it is still quite difficult to apply non-quadr...
In this paper, adaptive fuzzy fault-tolerant control (AFFTC) for the attitude control system of a hypersonic gliding vehicle (HGV) experiencing an actuator fault is proposed. Actuator faults of the HGV are considered with respect to its actual struct...
The problem of robust state estimation for a class of uncertain nonlinear systems with Markov jump is investigated. The uncertain nonlinear system under consideration is represented by the Takagi–Sugeno (T–S) fuzzy model because it is dif...
This paper presents a sensorless model predictive torque control strategy based on an adaptive Takagi–Sugeno (T–S) fuzzy model for the design of a six–phase permanent magnet synchronous generator (PMSG)–based hydrokinetic turb...
Accurate wind power and wind speed forecasting remains a critical challenge in wind power systems management. This paper proposes an ultra short-time forecasting method based on the Takagi–Sugeno (T–S) fuzzy model for wind power and wind...
Gas utilization ratio (GUR) is an important indicator that is used to evaluate the energy consumption of blast furnaces (BFs). Currently, the existing methods cannot predict the GUR accurately. In this paper, we present a novel data-driven model for...
This paper presents an integrated framework for aircraft engines, which consists of three phases: modeling, control, and experimental testing. The engine is formulated as an uncertain T–S fuzzy model. By a hierarchical dynamical parameter clust...
This paper examines the dynamics and control of a variable blade pitch wind turbine during extreme gust wind and subject to actuators saturation. The mathematical model of the wind turbine is derived using the Lagrange dynamics. The controller is for...
Continuum robots represent a class of highly sensitive, multiple-degrees-of-freedom robots that are biologically inspired. Because of their flexibility and accuracy, these robots can be used in maxillary sinus surgery. The design of an effective proc...
This research addresses the intricate challenges of fault estimation (FE) and fault-tolerant control (FTC) within a specific subset of T-S fuzzy systems. These systems are characterized by their localized nonlinear models, the presence of unknown inp...
Autonomous agricultural robots require accurate trajectory tracking to perform precision field operations such as seeding, fertilization, and pruning. Classical kinematic models fail to capture the nonlinear dynamics inherent to real field conditions...
A suitable model of coordinated control system (CCS) with high accuracy and simple structure is essential for the design of advanced controllers which can improve the efficiency of the ultra-super-critical (USC) power plant. Therefore, with the deman...
Chaotic systems are hard to synchronize, and no general solution exists. The presence of hidden attractors makes finding a solution particularly elusive. Successful synchronization critically depends on the control strategy, which must be carefully c...
This paper develops a mathematically grounded neuro-fuzzy control framework for IoT-enabled irrigation systems in precision agriculture. A discrete-time, physically motivated model of soil moisture is formulated to capture the nonlinear water dynamic...
This paper discusses an observer-based fuzzy control problem for uncertain nonlinear singular systems under Multi-Performance Requirements (MPRs). The approach used in the paper is to model the system using a Takagi–Sugeno (T-S) fuzzy model tha...
When the Takagi–Sugeno (T-S) fuzzy model is used to design controllers for a concerned system, the discrepancy between the system and its T-S fuzzy model becomes crucial sometimes in terms of control performance, particularly in cases when the magnit...
This paper is concerned with the adaptive event-triggered finite-time pinning synchronization control problem for T-S fuzzy discrete complex networks (TSFDCNs) with time-varying delays. In order to accurately describe discrete dynamical behaviors, we...
This paper investigates the observer-based fuzzy controller design method for nonlinear discrete-time singular systems that are represented by Takagi-Sugeno (T-S) fuzzy models. At first, the nonlinearity can be well-approximated with several local li...
This paper establishes a new stochastic SIR epidemic model that incorporates telegraph noise and Lévy noise to simulate the complex environmental disturbances affecting disease transmission. Given the susceptibility of epidemic spread to envir...
This paper proposes the Fuzzy Difference Equation Matrix Model (FDEMM), a novel predictive control algorithm designed for nonlinear multivariable systems. Standard Dynamic Matrix Control (DMC) often struggles with computational load and nonlinearitie...
This paper investigates the Static Output (SO) control issue of the disturbed nonlinear stochastic system, which achieves passivity. Through the application of fuzzy sets and the stochastic differential equation, a Takagi–Sugeno (T-S) fuzzy mod...
We investigate robust fault-tolerant control pertaining to Takagi–Sugeno (TS) fuzzy nonlinear systems with bounded disturbances, actuator failures, and time delays. A new fault model based on a sampled-data scheme that is able to satisfy certai...
Human–machine cooperative driving is an important stage in the development of autonomous driving technology. However, in emergencies, the problem of vehicle stability control for human–computer cooperative autonomous vehicles is still wor...
This paper investigates the observer-based non-fragile output feedback tracking control problem for nonlinear networked systems with randomly occurring gain variations. The considered nonlinear networked systems are represented by a Takagi–Suge...
Based on the basic concepts of agent and fuzzy T-S model, an agent based fuzzy T-S multi-model (ABFT-SMM) system is proposed in this paper. Different from the traditional method, the parameters and the membership value of the agent can be adjusted al...
The main objective of this paper is to design a robust multi-objective
Autonomous vehicles (AVs) are supposed to identify obstacles automatically and form appropriate emergency strategies constantly to ensure driving safety and improve traffic efficiency. However, not all collisions will be avoidable, and AVs are requir...
Along with increasingly serious water pollution, water environmental problems have become major factors that hinder the sustainable development of our economy and society. Reliable evaluation of water quality and accurate prediction of water pollutio...
In this paper, the problem of reliable control design with mixed
Hybrid synchronization control (HSC) has recently attracted considerable attention owing to its superior transient stability and adaptability to varying grid strengths. However, existing studies on HSC employ diverse control strategies for the Phase-...
In the quest for unparalleled reliability and robustness within control systems, significant attention has been directed toward mitigating actuator faults in diverse applications, from space vehicles to sophisticated industrial systems. Despite these...
The municipal solid waste incineration (MSWI) process plays a crucial role in managing the risks associated with waste accumulation and promoting the sustainable development of urban environments. However, unstable operation of the MSWI process can l...
of 4