Stannous oxide (SnO) nanowires were synthesized by a template and catalyst-free thermal oxidation process. After annealing a Sn nanowires-embedded anodic aluminum oxide (AAO) template in air, we obtained a large amount of SnO nanowires. SnO nanowires...
In this study, femtosecond (FS) laser irradiation with different laser energy densities of 138, 276, and 414 mJ/cm2 is applied to SnO2-nanowire (NW) gas sensors, and the effect of the FS laser irradiation on the gas sensor response toward toluene (C7...
A randomly oriented nanowire network, also called nanonet (NN), is a nano-microstructure that is easily integrated into devices while retaining the advantages of using nanowires. This combination presents a highly developed surface, which is promisin...
We have designed a new ternary structure to enhance the sensing properties of WS2 nanosheet (NS)-based gas sensors at room temperature (RT) in self-heating mode. SnO2 nanowires (NWs, 10–30 wt%) were added to WS2 NSs and then Au nanoparticles (N...
The construction of a heterostructured nanowires array allows the simultaneous manipulation of the interfacial, surface, charge transport, and transfer properties, offering new opportunities to achieve multi-functionality for various applications. He...
We prepared a highly sensitive and selective NO2 sensor, based on the TeO2 branched SnO2 nanowires (NWs), in terms of vapor-liquid-solid method, with subsequent growing of branches on the stems of SnO2 NWs. Fabricated sensors showed a high response h...
We investigated the electronic structure of Mg-, Si-, and Zn-doped four-faceted [001]- and [110]-oriented SnO2 nanowires using first-principles calculations based on the linear combination of atomic orbitals (LCAO) method. This approach, employing at...
X-Ray radiation sensors that work at room temperature are in demand. In this study, a novel, low-cost real-time X-ray radiation sensor based on SnO2 nanowires (NWs) was designed and tested. Networked SnO2 NWs were produced via the vapor–liquid&...
The surface chemistry and the morphology of SnO2 nanowires of average length and diameter of several µm and around 100 nm, respectively, deposited by vapor phase deposition (VPD) method on Au-covered Si substrate, were studied before and after...
Strict monitoring of methane (CH4) during underground coal mining is necessary, as the lower explosive limit (LEL) is 5 vol% in air. A conventional tin oxide (SnO2)-based metal–oxide semiconductor (MOS) sensor has an operating temperature of 20...
The development of reliable, highly sensitive hydrogen sensors is crucial for the safe implementation of hydrogen-based energy systems. This paper proposes a novel way to enhance the performance of hydrogen sensors through integrating Pd-SnO2 nanofil...
Humidity, along with temperature, is one of the most important environmental variables in people’s lives. The control of humidity is an important matter that is related to material properties and stability in various industries, as well as basi...
This study presents core/shell Ag/SnO2 nanowires (Ag/SnO2NWs) as a new photocatalyst for the rapid degradation of organic compounds by the light from the visible range. AgNWs after coating with a SnO2 shell change optical properties and, due to red s...
In this study, tin oxide (SnO2)/polyaniline (PANI) composite nanowires (NWs) with varying amounts of PANI were synthesized for carbon dioxide (CO2) gas sensing at room temperature (RT, 25 °C). SnO2 NWs were fabricated via the vapor–liquid&n...
The development of low-cost and low-power gas sensors for reliable NO2 gas detection is important due to the highly toxic nature of NO2 gas. Herein, initially, SnO2 nanowires (NWs) were synthesized through a simple vapor–liquid–solid grow...
The dye-sensitized solar cell (DSSC) is one candidate among the third-generation solar cells. The performance of most DSSCs based on TiO2 photoanode was limited by the low electron mobility within TiO2. To produce a much higher power conversion effic...
ZnSnO3 semiconductor nanostructures have several applications as photocatalysis, gas sensors, and energy harvesting. However, due to its multicomponent nature, the synthesis is far more complex than its binary counter parts. The complexity increases...
Metal oxide multi-nanowire-based chemical gas sensors were manufactured by a fast and simple transfer printing technology. A two-step method employing spray pyrolysis deposition and a thermal annealing process was used for SnO
Multi-nanowire based chemical gas sensors were produced employing a fast and simple transfer printing technology. SnO2 nanowires (NWs) were grown by a specific two-step technology including spray pyrolysis deposition and a thermal annealing process i...
In recent times, an increasing number of applications in different fields need gas sensors that are miniaturized but also capable of distinguishing different gases and volatiles. Thermal electronic noses are new devices that meet this need, but their...
Summary: We developed an SnO2 nanowire network visible-blind ultraviolet (UV) photodetector for applications in fields such as safety systems, exposure control, and decontamination processes, among others [...]
The surface of SnO2 nanowires was functionalized by chitosan for the development of room-temperature conductometric humidity sensors. SnO2 nanowires were synthesized by the seed-mediated physical-vapor-deposition (PVD) method. Chitosan layers were de...
In the present work SnO2 nanowires were synthetized by using vapour-liquid-solid technique (VLS) on alumina substrates, using different metal nanoparticles as catalyst for the growth. In particular, the effect of Au, Sn and Pd nanoparticles was explo...
Nanocomposites containing inorganic fillers embedded in polymer matrices have exhibited great potential applications in capacitors. Therefore, an effective method to improve the dielectric properties of polymer is to design novel fillers with a speci...
Optical excitation is widely acknowledged as one of the most effective means of balancing sensor responses and response/recovery properties at room temperature (RT, 25 °C). Moreover, noble metals have been proven to be suitable as photosensitizer...
SnO2 nanowires are locally synthesized by a simple thermal evaporation method and its growth mechanism is confirmed. Here, we present a simple strategy for realizing reduced graphene oxide (RGO)/SnO2 nanowires heterostructure. As expected, the hetero...
Thin-film microdevices can be applied to various wearable devices due to their high flexibility compared to conventional bulk-type electronic devices. Among the various microdevice types, many IoT-based sensor devices have been developed recently. In...
A chemosensor consisting of one single tin oxide nanowire is used to determine the freshness status of mackerel fish (Scomber scombrus) in a quick and non-invasive way. The tiny chemoresistive sensor is first tested with pure ammonia and then used to...
An inexpensive single-step carbon-assisted thermal evaporation method for the growth of SnO2-core/ZnO-shell nanostructures is described, and the ethanol sensing properties are presented. The structure and phases of the grown nanostructures are invest...
Electrochemical deposition into a prepared SiO2/Si-p ion track template was used to make orthorhombic SnO2 vertical nanowires (NWs) for this study. As a result, a SnO2-NWs/SiO2/Si nanoheterostructure with an orthorhombic crystal structure of SnO2 nan...
Industrial fermentation generates products through microbial growth associated with the consumption of substrates. The efficiency of industrial production of high commercial value microbial products such as ethanol from glucose (GLU) is dependent on...
Metal oxide 1D nanowires are probably the most promising structures to develop cheap stable and selective chemical sensors. The purpose of this contribution is to review almost two-decades of research activity at the Sensor Lab Brescia on their prepa...
In this study, chemical deposition was used to synthesize structures of Ga2O3 -NW/SiO2/Si (NW—nanowire) at 348 K and SnO2-NW/SiO2/Si at 323 K in track templates SiO2/Si (either n- or p-type). The resulting crystalline nanowires were δ-Ga2...
SnO2 is one of the most studied materials in gas sensing and is often used as a benchmark for other metal oxide-based gas sensors. To optimize its structural and functional features, the fine tuning of the morphology in nanoparticles, nanowires, nano...
SnO2 is one of the most studied materials in gas sensing. Among the many strategies adopted to optimize its sensing properties, the fine tuning of the morphology in nanoparticles, nanowires, and nanosheets, as well as their eventual hierarchical orga...
One-dimensional (1D) SnO2 nanostructures, as n-type semiconductors with a wide band gap, exhibit unique photoelectric properties that offer potential applications in electronic, photoelectric, gas sensing, and energy generation devices. A detailed st...
Nitric oxide (NO2) is one of the air pollutants that pose serious environmental concerns over the years. In this study, SnO2 nanowires were synthesized by evaporation-condensation method and graphene oxide were synthesized using modified Hummers meth...
A comparison is made between SnO2, ZnO, and TiO2 single-crystal nanowires and SnO2 polycrystalline nanofibers for gas sensing. Both nanostructures possess a one-dimensional morphology. Different synthesis methods are used to produce these materials:...
Nitrogen dioxide (NO2) is a highly toxic oxidizing gas; therefore, the development of highly reliable room-temperature (RT) gas sensors with low power consumption is important for practical applications. Herein, WS2 nanosheet (NS)–SnO2 nanowire...
Multicolor emission and dynamic color tuning with large spectral range are challenging to realize but critically important in many areas of technology and daily life, such as general lighting, display, multicolor detection and multi-band communicatio...
Hybrid organic-inorganic perovskite has proved to be a superior material for photovoltaic solar cells. In this work we investigate the parameters influencing the growth of ZnO nanowires (NWs) for use as an efficient low temperature photoanode in pero...
A new method for the site-selective synthesis of nanowires has been developed to enable the material growth with specific morphology and different compositions on one single chip. Based on a modification of the chemical vapor deposition method, the g...
This study reports on single-walled carbon nanotubes (SWCNT) as templates for the preparation of 1D porous organic-inorganic hybrid composites. The in situ deposited SWCNT were sputter coated with Sn metal and thermally oxidized in air to form a SnO2...
Recently, low-dimensional (1D, 2D) nanostructured materials have been attracting more and more interest as building blocks for innovative systems. Metal oxide nanowires are one of the most widely used materials for solid-state gas sensors, as they ar...
At present, silver nanowire transparent conductive films (AgNWs-TCFs) still have problems such as high resistance of AgNWs network nodes, uneven distribution of resistance and poor electrical performance stability, which restrict their commercial app...
Transition metal oxides with high theoretic capacities are promising materials as battery-type electrodes for hybrid supercapacitors, but their practical applications are limited by their poor electric conductivity and unsatisfied rate capability. In...
A highly sensitive and novel sensor platform for gases and volatile chemicals using microcantilever based potentiometry is reported. A resonant cantilever is used to detect the changes in surface work functions of functionalized substrates caused by...
The increasing presence of pharmaceutical residues such as ibuprofen in aquatic environments represents a growing concern due to their persistence and limited biodegradability. In this study, selenium-doped tin oxide (SnO2:Se) nanoparticles covered w...
Nanostructures with complex geometry have gathered interest recently due to some unusual and exotic properties associated with both their shape and material. 3D multi-branched SnO2 one-dimensional nanostructrures, characterized by a “node&rdquo...
With the continuous advancement of high-tech industries, how to properly handle pollutants has become urgent. Photocatalysis is a solution that may effectively degrade pollutants into harmless molecules. In this study, we synthesized single crystalli...
of 2