The uncracked semi-circular bend (SCB) test has recently gained attention as a simple and material-efficient method for determining the tensile strength of brittle geomaterials. However, as reported in the literature and confirmed by our experiments,...
Cement asphalt emulsion mixture (CAEM) is a composite material composed of asphalt emulsion, cement, and graded aggregates. Currently, CAEM is primarily applied as a base course material for highways to improve the cracking resistance of pavement str...
The growing environmental effect of asphalt pavements has fueled interest in sustainable alternatives including the application of recycled materials and self-healing systems. This research investigates the synergistic possibilities of steel slag agg...
Mixed-mode fracture toughness refers to the ability of a material to withstand loads and expand under multiple modes of loading. It is usually tested by a semi-circular bend (SCB) to investigate the shale fracture toughness under combined modes of lo...
In this study, the combined effect of waste lubricating oil (WLO) and waste pine branch ash (WPBA) was investigated to improve the low-temperature fracture behavior of asphalt mixtures. To investigate the low-temperature fracture behavior of the mixt...
In most cases, stone mastic asphalt (SMA) mixtures placed in thin layers and subjected to stress develop early cracks (potentially resulting from being improperly affixed to the underlying layer, placed over previously cracked asphalt pavement, or pl...
Fatigue cracking is one of the primary distresses of asphalt pavements, which significantly affects the asphalt pavement performance. The fatigue behavior of the asphalt mixture observed in the laboratory test can vary depending on the type of fatigu...
The semi-circular bend (SCB) test is widely used to characterize asphalt mixture cracking resistance. However, the practical usefulness of the test depends on the reliability of the measured fracture parameters. This study investigates SCB testing fr...
The use of reclaimed asphalt pavement (RAP) has been increasing due to its economic benefits and environmental sustainability. Adding RAP materials introduces age-hardened binder, which tends to increase the rutting resistance but decrease cracking r...
In regions with low-temperatures, action transverse cracks can appear in asphalt pavements as a result of thermal stresses that exceed the fracture strength of materials used in asphalt layers. To better understand thermal cracking phenomenon, streng...
Most semi-circular bend (SCB) tests on concrete have been conducted with a pre-crack with a straight-through tip, thereby undermining the determination of the tensile fracture toughness (KIc). Therefore, the present study involved mixed-mode (tensile...
This paper aims to investigate the fatigue cracking evolution of cold recycled asphalt mixtures with asphalt emulsion (CRME) under different curing times. The fatigue cracking model of CRME based on damage mechanics and fracture mechanics was analyze...
The cracking problem of asphalt concrete panels is a crucial consideration in the design of hydraulic asphalt concrete seepage control bodies. Panels experiencing uneven rises or falls of water levels during impoundment may exhibit loading rate effec...
In Global Navigation Satellite System (GNSS), a spoofing attack consists of forged signals which possibly cause the attacked receivers to deduce a false position, a false clock, or both. In contrast to simplistic spoofing, the induced spoofing captur...
At present, there are no specific indicators and requirements for the low-temperature crack resistance of emulsified asphalt cold recycled mixture (CRME) in the Chinese road mixture specifications. In order to expand the application of this technolog...
The paper presents the influence of laboratory aging simulation on fracture properties determined on 150 variants of asphalt mixtures. The fracture properties were determined by two different test approaches—semi-circular bending test (SCB test) and...
Fiber-reinforced asphalt mixtures improve cracking resistance through fiber bridging, pull-out, and crack-path deflection, but their semi-circular bending (SCB) fracture energy is affected by coupled mixture, testing, and fiber-related variables. Thi...
This manuscript presents a comprehensive study on the sustainable optimization of asphalt mixtures tailored for regions prone to flooding. The research addresses the challenges associated with water damage to asphalt pavements by incorporating innova...
The effect of moisture on the fracture resistance of asphalt concrete is a significant concern in pavement engineering. To investigate the effect of the water vapor concentration on the fracture properties of asphalt concrete, this study first design...
This paper explores the potential methods for evaluating a healing system for asphalt pavements. The healing system under investigation involves compartmented calcium-alginate fibres encapsulating an asphalt binder healing agent (rejuvenator). This s...
Asphalt ultra-thin overlays have emerged as an efficient and cost-effective pavement preservation technology. However, because of their reduced thickness, their service life is often limited by cracking. Based on semi-circular bending (SCB) test data...
This study introduces a Bayesian model updating approach for analyzing the long-term performance of steel–concrete composite beams (SCBs). Two nominally identical SCBs (SCB-1 and SCB-2) were designed, fabricated, and subjected to modal testing....
(1) Background: The utilization of high-quality evidence regarding the safety of anti-seizure medications (ASMs) is constrained by the absence of standardized reporting. This study aims to examine the safety profile of ASMs using real-world data. (2)...
A semiconductor bridge (SCB) is an ignition device that provides a safe and efficient method widely used in civilian and military fields. The heating process of an SCB under electrical stimulation has a wide range of applications owing to its unique...
Hydrothermally carbonized sugarcane bagasse (SCB) has exceptional surface properties. Looking at the huge amount of SCB produced, its biocompatible nature, cheap-cost for carbonization, and its easy functionalization can give impeccable nano-biomater...
Reflective cracking is a common distress of semi-rigid base asphalt pavements and overlay pavement projects. An asphalt rubber stress-absorbing membrane interlayer (AR-SAMI) prepared by waste tires is an effective engineering solution for treating re...
A biomass-based catalyst with amine groups (–NH2), viz., amine-functionalized sugarcane bagasse (SCB-NH2), was prepared through the amination of sugarcane bagasse (SCB) in a two-step process. The physicochemical properties of the catalyst were charac...
The striped cucumber beetle (SCB) Acalymma vittatum (F.) (Coleptera: Chrysomelidae) is a prime problem in North American cucurbit crops. While certain chemical pesticides efficiently control SCB in conventional cucurbit fields, alternative solutions...
The high consumption of packaging has led to a massive production of waste, especially in the form of nonbiodegradable polymers that are difficult to recycle. Microbial cellulose is considered a biodegradable, low-cost, useful, ecologically correct p...
Inspired by the caregiver stress process model emphasising the role of resources for caregiving outcomes, the aim of this study was to investigate the prevalence of subjective caregiver burden (SCB) and its associations with individual social, econom...
This experimental study investigated the hydrodynamic performance of the first free-surface semicircular breakwater supported on piles under regular waves. The research focused on SCB models with porosity levels of 0%, 9%, 18%, and 27%. Experimental...
To achieve environmental sustainability, especially in developing nations, the world needs immediate action because of present environmental trends. Sustainable consumer behavior (SCB) is very important for both improving environmental sustainability...
The ecology of cellulolytic bacteria in bulk soil is still relatively unknown. There is still only a handful of papers on the abundance and diversity of this group of bacteria. Our study aimed to determine the impact of various crop management system...
The scarcity of high-quality Paleozoic paleomagnetic data from the South China Block (SCB) has rendered the kinematic history of its rifting and drifting from Gondwana highly debated, consequently leaving the timing of opening and subsequent spreadin...
Business development policies cover both marketing and sales functions, as they are so intertwined in most firms. Thus, managers should comply with the factors that influence sustainable consumption behaviour. The study aims to investigate the effect...
Synthetic microbial communities (SynComs) play significant roles in soil health and sustainable agriculture. In this study, bacterial SynComs (SCBs) and fungal SynComs (SCFs) were constructed by selecting microbial species that could degrade the pota...
Cracks in asphalt mixtures compromise the structural integrity of roads, increase maintenance costs, and shorten pavement lifespan. These cracks allow for water infiltration, accelerating pavement deterioration and jeopardizing vehicle safety. This r...
In order to investigate the fatigue cracking resistance of engineered cementitious composites (ECC) used in in total life pavement, the semi-circular bending (SCB) test and improved three-point bending fatigue test (ITBF) were utilized in this study....
Due to the difficulty of creating directional fractures efficiently and accurately with existing non-explosive rock-breaking methods, a directional fracturing technique utilizing a coal-based solid waste expansive agent, termed the instantaneous expa...
Various inverter applications such as electronic vehicles, renewable energy systems, and uninterrupted power supplies have been the motive behind the increasing focus on the DC-AC inverters field. Therefore, DC-AC inverters have been evolving with th...
This study was carried out to investigate the continuous aqueous pretreatment of sugarcane bagasse (SCB) through twin-screw extrusion for a new integrated full valorization, where the solid residue (extrudate) was used for the production of bio-based...
Short-chain branched-Polyethylene (SCB-PE) is commonly utilized in hot and cold piping systems due to its high-temperature resistance. SCB-PE nanocomposites using graphene nanoplatelets (GNPs) as a reinforcing filler were synthesized in this work. Th...
Sugarcane bagasse (SCB) is a waste product from Mexico’s sugar industry that is generally burned or discarded. It contains around 48% cellulose, representing a significant source of this component from industrial waste. Eugenol is found in clov...
13 November 2022
Background: Exercise training programs have the potential to improve cognitive function in older subjects. However, the majority of training programs are based on aerobic modality. In the current study, the influence of 3 months programs of sitting c...
Bio-based materials help reduce the consumption of non-renewable resources, contributing to the development of sustainable construction. Industrial Hemp Concrete (IHC), which uses hemp stalk (HS) as an aggregate and a lime-based binder, is a bio-base...
A spring–dashpot model, consisting of a spring branch and two Maxwell (named long- and short-term) branches, was used to simulate stress drop during the relaxation stages of multi-relaxation (MR) tests. This work shows that the stress drop at r...
Biochars (BCs) are very versatile adsorbents, mainly, in the effectiveness of adsorption of organic and inorganic compounds in aqueous solutions. Here, the sugarcane biomass (SCB) was used to produce biochar at different carbonization times: 1, 2, 3,...
Purpose: Minimal clinically important difference (MCID), substantial clinical benefit (SCB), and patient acceptable symptomatic state (PASS) serve as metrics to gauge orthopedic treatment efficacy based on anchoring questions that do not account for...
The coupled steel plate and reinforced concrete (C-SPRC) composite wall is a new type of coupled-wall system consisting of steel coupling beams (SCBs) that join two SPRC walls where the steel plate shear wall (SPSW) is embedded in the RC wall. Althou...
The Masquelet technique is used to treat large bone defects; it is a two-stage procedure based on an induced membrane. To improve the induced membrane process, demineralized bone matrix in granular (GDBM) and fibrous form (f-DBM) was tested with and...
of 3