Skip to Content
You are currently on the new version of our website. Access the old version .

116 Results Found

  • Article
  • Open Access
4 Citations
1,172 Views
15 Pages

19 June 2025

This study explores a global–local non-intrusive computational strategy to address problems in computational mechanics, specifically applied to a double cantilever beam (DCB) with cohesive interfaces. The method aims to reduce computational req...

  • Article
  • Open Access
1 Citations
1,259 Views
19 Pages

Analysis of Post-Bonding Crack-Induced Double Cantilever Bending (PDC-DCB) Method for Hybrid Bonding Strength Measurement

  • Cong Mei,
  • Tianze Zheng,
  • Qiuhan Hu,
  • Yingjie Chen and ,
  • Yuan Xu,
  • Huiyao Zhao,
  • Liu Chang,
  • Yuan Yuan,
  • Zongguang Yu and
  • Liyi Li
  • + 5 authors+ 0 author

5 December 2025

The quantitative measurement of bonding strength in hybrid bonding (HB) is an indispensable metrology for process and reliability evaluation. Methods currently used such as blade insertion (BI) and double cantilever bending (DCB) have suffered from a...

(This article belongs to the Special Issue Advanced Electronic Packaging Technology: From Hard to Soft (Second Edition))
  • Abstract
  • Open Access
1,534 Views
5 Pages

Non-Destructive Testing of CFRP DCB Specimens Using Active Thermography

  • Ding-En Wu,
  • Chih-Hung Chiang,
  • Mahesh and
  • Keng-Tsang Hsu

A Mode I Interlaminar Fracture Toughness test of carbon fiber-reinforced polymer laminates requires a double cantilever beam (DCB) specimen with a pre-implanted non-adhesive insert at the mid-plane to initiate delamination. However, the insert’...

(This article belongs to the Proceedings of The 18th International Workshop on Advanced Infrared Technology and Applications)
  • Article
  • Open Access
34 Citations
4,044 Views
17 Pages

15 November 2020

This paper presents an experimental evaluation of influence of the elastic couplings on the fracture toughness as well as on delamination initiation and propagation in carbon/epoxy composite laminates. For this purpose the mode I double cantilever be...

(This article belongs to the Special Issue Advances in Fiber-Reinforced Polymer Composites)
  • Article
  • Open Access
23 Citations
9,478 Views
14 Pages

Effect of Silane Coupling Treatment on the Adhesion between Polyamide and Epoxy Based Composites Reinforced with Carbon Fibers

  • Vincenzo Fiore,
  • Vincenzo Orlando,
  • Carmelo Sanfilippo,
  • Dionisio Badagliacco and
  • Antonino Valenza

28 July 2020

The increasing efforts aimed to design structures with reduced weight and better mechanical performances has led in recent years to a growing use of fiber reinforced polymer materials in several fields such as marine. However, these materials can be...

(This article belongs to the Special Issue Carbon Based Composites for Advanced Sustainable Technologies)
  • Article
  • Open Access
10 Citations
2,808 Views
14 Pages

3 November 2022

This paper aims at experimental and numerical research of delamination process in carbon/epoxy composite laminates with different fiber orientation angles in stacking sequence exhibiting the bending–twisting elastic couplings. Experimental spec...

  • Article
  • Open Access
2 Citations
2,240 Views
22 Pages

25 November 2024

Reliable performance of composite adhesive joints under low-velocity impact is essential for ensuring the structural durability of composite materials in demanding applications. To address this, the study examines the effects of temperature, surface...

(This article belongs to the Special Issue Impact Behaviour of Materials and Structures)
  • Article
  • Open Access
27 Citations
5,316 Views
14 Pages

31 March 2021

With an increasing demand for adhesives, the durability of joints has become highly important. The fatigue resistance of adhesives has been investigated mainly for epoxies, but in recent years many other resins have been adopted for structural adhesi...

(This article belongs to the Special Issue Advanced Characterization of Adhesive Joints and Adhesives)
  • Article
  • Open Access
24 Citations
3,224 Views
11 Pages

Favorable Vasomotor Function after Drug-Coated Balloon-Only Angioplasty of De Novo Native Coronary Artery Lesions

  • Sunwon Kim,
  • Jong-Seok Lee,
  • Yong-Hyun Kim,
  • Jin-Seok Kim and ,
  • Sang-Yup Lim,
  • Seong Hwan Kim,
  • Minjung Kim,
  • Jeong-Cheon Ahn and
  • Woo-Hyuk Song
  • + 4 authors+ 0 author

7 January 2022

Balloon-injured coronary segments are known to harbor abnormal vasomotion. We evaluated whether de novo coronary lesions treated using drug-coated balloon (DCB) are prone to vasospasm and how they respond to ergonovine and nitrate. Among 132 DCB angi...

(This article belongs to the Section Vascular Medicine)
  • Article
  • Open Access
25 Citations
4,827 Views
18 Pages

16 May 2019

The paper deals with numerical analysis of double cantilever beam (DCB) predefined to Mode I Interlaminar Fracture Tests of GRFP unidirectional laminates. The numerical analyses were performed in the ANSYS® program based on the finite element. In...

(This article belongs to the Special Issue Behavior of Metallic and Composite Structures)
  • Article
  • Open Access
10 Citations
5,775 Views
16 Pages

Creep Crack Growth Behavior during Hot Water Immersion of an Epoxy Adhesive Using a Spring-Loaded Double Cantilever Beam Test Method

  • Kota Nakamura,
  • Yu Sekiguchi,
  • Kazumasa Shimamoto,
  • Keiji Houjou and ,
  • Haruhisa Akiyama and
  • Chiaki Sato
  • + 1 author+ 0 author

8 January 2023

Double cantilever beam (DCB) tests were conducted by immersing the specimens in temperature-controlled water while applying a creep load using a spring. By introducing a data reduction scheme to the spring-loaded DCB test method, it was confirmed tha...

(This article belongs to the Special Issue Mechanical Properties and Application of Adhesive Materials)
  • Article
  • Open Access
7 Citations
5,793 Views
22 Pages

15 February 2019

This study presents a two-dimensional ordinary state-based peridynamic (OSB PD) modeling of mode-I delamination growth in a double cantilever composite beam (DCB) test using revised energy-based failure criteria. The two-dimensional OSB PD composite...

(This article belongs to the Special Issue Fracture and Fatigue Assessments of Structural Components)
  • Article
  • Open Access
31 Citations
6,433 Views
13 Pages

In-house Implementation of Tumor Mutational Burden Testing to Predict Durable Clinical Benefit in Non-small Cell Lung Cancer and Melanoma Patients

  • Simon Heeke,
  • Jonathan Benzaquen,
  • Elodie Long-Mira,
  • Benoit Audelan and ,
  • Virginie Lespinet,
  • Olivier Bordone,
  • Salomé Lalvée,
  • Katia Zahaf,
  • Michel Poudenx and
  • Paul Hofman
  • + 15 authors+ 10 authors

29 August 2019

Tumor mutational burden (TMB) has emerged as an important potential biomarker for prediction of response to immune-checkpoint inhibitors (ICIs), notably in non-small cell lung cancer (NSCLC). However, its in-house assessment in routine clinical pract...

(This article belongs to the Special Issue Application of Next-Generation Sequencing in Cancers)
  • Article
  • Open Access
10 Citations
3,444 Views
26 Pages

12 September 2023

In this paper, a new physical layer authenticated encryption (PLAE) scheme based on the multi-parameter fractional Fourier transform–Orthogonal frequency division multiplexing (MP-FrFT-OFDM) is suggested for secure image transmission over the I...

(This article belongs to the Section Internet of Things)
  • Article
  • Open Access
47 Citations
9,429 Views
20 Pages

16 March 2017

We present quad-constellation (namely, GPS, GLONASS, BeiDou and Galileo) time group delay (TGD) and differential code bias (DCB) correction models to fully exploit the code observations of all the four global navigation satellite systems (GNSSs) for...

(This article belongs to the Section Remote Sensors)
  • Article
  • Open Access
19 Citations
3,905 Views
14 Pages

Loading Rate and Temperature Interaction Effects on the Mode I Fracture Response of a Ductile Polyurethane Adhesive Used in the Automotive Industry

  • Mael Perez,
  • Alireza Akhavan-Safar,
  • Ricardo J. C. Carbas,
  • Eduardo A. S. Marques and ,
  • Sabine Wenig and
  • Lucas F. M. da Silva
  • + 1 author+ 0 author

14 December 2022

Due to their high elongation at failure and damping capacity, polyurethanes are one of the main types of adhesives used in automotive structures. However, despite the wide range of applications of adhesives, their fracture mechanics behavior is still...

(This article belongs to the Collection Advanced Composite Materials and Structures for Aerospace, Automotive and Civil Engineering Applications)
  • Article
  • Open Access
1 Citations
1,201 Views
11 Pages

Prognostic Impact of Chronic Kidney Disease After Percutaneous Coronary Intervention with Drug-Coated Balloons

  • Tetsuya Takahashi,
  • Tetsu Watanabe,
  • Mashu Toyoshima,
  • Wataru Katawaki and ,
  • Taku Toshima,
  • Yu Kumagai,
  • Tamon Yamanaka and
  • Masafumi Watanabe
  • + 3 authors+ 0 author

28 March 2025

Background: A drug-coated balloon (DCB) is an emerging treatment technology for percutaneous coronary intervention (PCI). However, the prognostic factors of PCI with a DCB remain fully determined. Chronic kidney disease (CKD) is an independent predic...

(This article belongs to the Section Cardiology)
  • Article
  • Open Access
1 Citations
2,432 Views
15 Pages

16 August 2024

The mechanical testing of additively manufactured parts has largely relied on the existing standards developed for traditional manufacturing. While this approach leverages the investment made in current standards development, it inaccurately assumes...

(This article belongs to the Section Polymer Analysis and Characterization)
  • Review
  • Open Access
23 Citations
11,210 Views
13 Pages

Paclitaxel-Coated Versus Sirolimus-Coated Eluting Balloons for Percutaneous Coronary Interventions: Pharmacodynamic Properties, Clinical Evidence, and Future Perspectives

  • Filippo Luca Gurgoglione,
  • Mattia De Gregorio,
  • Giorgio Benatti,
  • Davide Donelli and ,
  • Luigi Vignali,
  • Emilia Solinas,
  • Iacopo Tadonio,
  • Andrea Denegri,
  • Marco Covani and
  • Giampaolo Niccoli
  • + 7 authors+ 2 authors

Drug-coated balloons (DCBs) have emerged as an increasingly valuable option for the treatment of coronary artery disease (CAD). Percutaneous coronary intervention (PCI) with DCBs enables the localized delivery of antiproliferative drugs directly to t...

  • Article
  • Open Access
2 Citations
2,381 Views
40 Pages

ESG Determinants of Financial Development: Integrating Econometrics and Machine-Learning Evidence

  • Angelo Leogrande,
  • Massimo Arnone,
  • Alberto Costantiello and
  • Carlo Drago

The objective of this research is to analyze the relationship between ESG factors and financial development, measured by Domestic Credit to the Private Sector by Banks (DCB). The empirical analysis employs a balanced panel of 82 countries for the yea...

(This article belongs to the Section Financial Markets)
  • Article
  • Open Access
2 Citations
2,716 Views
19 Pages

Design of an Experimental System for the Assessment of the Drug Loss in Drug-Coated Balloons Due to Washing Off During Tracking

  • Dimitrios Zantzas,
  • Elena Bianchi,
  • Francesca Berti,
  • Mohammad Akrami-Hasan-Kohal and ,
  • Tahmer Sharkawi and
  • Giancarlo Pennati
  • + 1 author+ 0 author

24 March 2025

Drug-coated balloons (DCBs) are designed to deliver an anti-proliferative drug to the stenotic vessel to combat restenosis after an angioplasty treatment. However, significant drug loss can occur during device navigation toward the lesion site, thus...

(This article belongs to the Collection Editorial Board Members’ Collection Series: Biomaterials Design)
  • Communication
  • Open Access
8 Citations
5,513 Views
20 Pages

Treatment of Peripheral Artery Disease Using Injectable Biomaterials and Drug-Coated Balloons: Safety and Efficacy Perspective

  • Safi Ur Rehman Qamar,
  • Lemana Spahić,
  • Leo Benolić,
  • Marko Zivanovic and
  • Nenad Filipović

The possibility of injectable biomaterials being used in the therapy of peripheral artery disease (PAD) is investigated in this article. We conducted a thorough review of the literature on the use and efficacy of biomaterials (BMs) and drug-coated ba...

(This article belongs to the Section Pharmacokinetics and Pharmacodynamics)
  • Article
  • Open Access
9 Citations
3,487 Views
9 Pages

14 December 2022

In this prospective randomized single-blinded study (reg. ISRCTN11414306), 76 patients with a dysfunctional dialysis fistula or graft due to a single de novo or recurrent stenosis in the access circuit were randomized to receive either conventional P...

(This article belongs to the Section Vascular Medicine)
  • Article
  • Open Access
24 Citations
5,416 Views
17 Pages

19 November 2023

With the increasing demand for lightweight and high-performance materials in the automotive and aerospace industries, full-thermoplastic hybrid composites have emerged as a pivotal solution, offering enhanced mechanical properties and design flexibil...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
22 Citations
8,155 Views
19 Pages

Rheological and Mechanical Properties of an Acrylic PSA

  • Beatriz D. Simões,
  • Eduardo A. S. Marques,
  • Ricardo J. C. Carbas,
  • Steven Maul and ,
  • P. Stihler,
  • Philipp Weißgraeber and
  • Lucas F. M. da Silva
  • + 2 authors+ 0 author

21 September 2023

The adhesion of pressure-sensitive adhesives (PSAs) is a complex phenomenon that can be understood through the characterization of different properties, including viscoelastic, mechanical, and fracture properties. The aim of the present paper is to d...

  • Article
  • Open Access
879 Views
18 Pages

Characterization of the Interlaminar Fracture Toughness of an Additive Manufacturing Continuous Glass Fiber-Reinforced Thermoplastic Composite

  • Jonnathan D. Santos,
  • Fernando Crespo Beltrán,
  • Mateo Berrezueta,
  • Alexander Torres and ,
  • Alex Gavilanes Álvarez and
  • Alfredo Valarezo
  • + 1 author+ 0 author

9 June 2026

There is a lack of knowledge concerning the interlaminar fracture toughness of 3D-printed composite materials using both commercial filament composites and fused deposition modeling (FDM) technology from Markforged®. In this investigation, additi...

(This article belongs to the Special Issue Fibre-Reinforced Polymer Laminates: Structure and Properties)
  • Article
  • Open Access
334 Views
21 Pages

21 August 2026

Hybrid cross-laminated timber combining plantation Chinese fir (Cunninghamia lanceolata (Lamb.) Hook.) with oriented strand board (OSB) is resource-efficient, but its bond line may govern delamination. Double cantilever beam (DCB) specimens bonded wi...

(This article belongs to the Special Issue Sustainable High-Performance Wood–Bamboo/Inorganic Composites: Design, Function and Life-Cycle Calculation)
  • Feature Paper
  • Article
  • Open Access
9 Citations
4,045 Views
11 Pages

Developmental Hazard of Environmentally Persistent Free Radicals and Protective Effect of TEMPOL in Zebrafish Model

  • Xia Guan,
  • Lisa Truong,
  • Slawomir M. Lomnicki,
  • Robyn L. Tanguay and
  • Stephania A. Cormier

16 January 2021

Environmentally persistent free radicals (EPFRs) can be detected in ambient PM2.5, cigarette smoke, and soils and are formed through combustion and thermal processing of organic materials. The hazards of EPFRs are largely unknown. In this study, we a...

(This article belongs to the Special Issue Advanced Zebrafish Model for Environmental Health Sciences Research)
  • Article
  • Open Access
1,220 Views
18 Pages

An Inverse Analysis of Interfacial Parameter Values for Mode I Debonding Between Steel and Hot-Melt Adhesive

  • Jun Shi,
  • Jian Zhang,
  • Mingzhen Hu,
  • Yingjie Li and ,
  • Guide Deng and
  • Wenjun Liu
  • + 1 author+ 0 author

10 October 2025

A polyethylene pipe reinforced with winding steel wires (PSP) is a new composite pipe in which steel wires are effectively bonded with high-density polyethylene (HDPE) through hot-melt adhesive, ensuring the mechanical properties and structural integ...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
1,342 Views
19 Pages

A Comprehensive Experimental and Finite Element Analysis Study on the Bonding Strength Evaluation of Wafer-to-Wafer Hybrid Bonding with Polyimide Film Dielectrics

  • Cong Mei,
  • Tianze Zheng,
  • Ziyang Ding,
  • Dan Zhang and ,
  • Yuan Xu,
  • Huiyao Zhao,
  • Liu Chang,
  • Qiuhan Hu,
  • Chenhui Xia and
  • Liyi Li
  • + 6 authors+ 1 author

Polymer insulation layers such as polyimide (PI) have gradually replaced inorganic dielectric layers (SiO2, SiCN) in the integrated packaging process of hybrid bonding (HB). PI can fill the gaps in the thermal compression bonding process and help to...

  • Article
  • Open Access
19 Citations
4,251 Views
16 Pages

14 May 2020

In order to meet the ever-increasing traffic demand of Wireless Local Area Networks (WLANs), channel bonding is introduced in IEEE 802.11 standards. Although channel bonding effectively increases the transmission rate, the wider channel reduces the n...

(This article belongs to the Section Communications)
  • Article
  • Open Access
820 Views
20 Pages

Environmental Cracking Failure Analysis of Stainless Steel Threaded Joint in Rotary Steerable Tool

  • Yuhong Jiang,
  • Hualin Zheng,
  • Jiancheng Luo,
  • Ke Zhang and ,
  • Zhengpeng Du,
  • Wei Liu,
  • Zhiming Yu and
  • Dezhi Zeng
  • + 3 authors+ 0 author

17 February 2026

Axial cracking in threaded joints of rotary steerable tools is a critical but under-investigated failure mode that can severely disrupt shale gas drilling operations. Understanding its root cause is essential for prevention. This study aims to determ...

(This article belongs to the Special Issue Oil and Gas Well Engineering: Experimental and Numerical Investigation)
  • Article
  • Open Access
5 Citations
4,606 Views
10 Pages

29 March 2021

The emergence of graphene paper comprising well-stacked graphene flakes has promoted the application of graphene-based materials in diverse fields such as energy storage devices, membrane desalination, and actuators. The fundamental properties of gra...

(This article belongs to the Special Issue Nanomechanics of Carbon Nanomaterials)
  • Article
  • Open Access
22 Citations
3,107 Views
23 Pages

17 March 2021

Automated tape placement with in-situ consolidation (ATPisc) is a layer-wise manufacturing process in which the achievement of proper interlayer bonding constitutes one of the most challenging aspects. In the present study, unidirectional carbon fibe...

(This article belongs to the Special Issue Fracture Mechanics Investigation of Polymeric Materials)
  • Article
  • Open Access
32 Citations
5,545 Views
13 Pages

24 July 2021

In this study, a carbon nanotube (CNT) buckypaper was interleaved in a carbon-fiber-reinforced polymer (CFRP) composite to improve the interlaminar fracture toughness. Interleaving the film of a laminate-type composite poses the risk of deteriorating...

(This article belongs to the Special Issue Additive Manufacturing for Composite Materials)
  • Article
  • Open Access
1,256 Views
13 Pages

Fracture Energy Reduction Caused by Water at the Crack Front of an Aluminum/Epoxy Resin Interface

  • Aoto Seki,
  • Tetsuto Terabayashi,
  • Kazumasa Shimamoto,
  • Chiaki Sato and
  • Yu Sekiguchi

A detailed understanding of interface degradation in humid environments is essential for improving the reliability of adhesive bonding technologies. Water absorption within the adhesive layer significantly affects joint strength, a factor considered...

  • Article
  • Open Access
14 Citations
3,290 Views
20 Pages

10 May 2020

In order to monitor the crack growth of the wood material better and reduce failure risks, this paper studied the attenuation characteristics of acoustic emission signals in wood through pencil lead breaking (PLB) tests, in the aim of estimating the...

(This article belongs to the Special Issue Nondestructive Evaluation of Forest Biomaterials: A Global Perspective)
  • Article
  • Open Access
9 Citations
2,030 Views
25 Pages

24 May 2025

Thermoplastic fiber metal laminates (FMLs) are hybrid material systems that consist of a thin aluminum alloy sheet bonded to plies of fiber-reinforced adhesive. They provide excellent properties like fatigue strength, damage-tolerant properties, and...

(This article belongs to the Special Issue Advances in Fatigue and Fracture of Fiber-Reinforced Polymers)
  • Article
  • Open Access
2 Citations
3,038 Views
17 Pages

Investigation of Skin–Stringer Assembly Made with Adhesive and Mechanical Methods on Aircraft

  • Hacı Abdullah Tasdemir,
  • Berke Alp Mirza and
  • Yunus Hüseyin Erkendirci

New assembly methods for aircraft structural parts, such as skins and stringers, are being investigated to address issues like galvanic corrosion, stress concentration, and weight. For this, many researchers are examining the mechanical and fracture...

(This article belongs to the Special Issue Advanced Aircraft Structural Design and Applications)
  • Review
  • Open Access
756 Views
29 Pages

Mode I Debonding Characterisation in Polymer-Based Sandwich Structures: A Review of Experimental Methods

  • Amal Alliyankal Vijayakumar,
  • Francesca Lionetto and
  • Alfonso Maffezzoli

17 June 2026

Polymer-based sandwich structures are widely used for their lightweight and tailorable properties, but interfacial failure phenomena often govern their performance. Among these, Mode I skin/core debonding is a critical mechanism that limits structura...

(This article belongs to the Special Issue Advances in the Structure and Mechanical Properties of Polymer Composites)
  • Article
  • Open Access
1 Citations
1,462 Views
21 Pages

Photopolymer-Based Carbon with Iron Nanoparticles as Electrodes in Microbial Fuel Cells for Efficient Industrial Effluent Wastewater Treatment

  • Ricardo da Silva Furlan,
  • Noelia Corrochano,
  • Rodrigo Brackmann,
  • Mariana de Souza Sikora and ,
  • Carlos Sotelo-Vazquez and
  • Jose L. Diaz de Tuesta
  • + 1 author+ 0 author

13 April 2026

Accelerated industrial development demands the search for efficient remediation technologies. Microbial fuel cells (MFCs) have the capacity to remediate organic matter-rich effluent by utilizing bacteria as biocatalysts capable of oxidizing organic m...

(This article belongs to the Special Issue Catalytic Mechanisms of Nanomaterials in Energy and Environmental Applications)
  • Proceeding Paper
  • Open Access
2 Citations
2,479 Views
5 Pages

Low Temperature and Resin Effects on the Mode I Interlaminar Fracture Toughness in Aeronautical Quality Polymer Composites

  • Patricia Coronado,
  • Pedro Camanho,
  • Antonio Argüelles,
  • Jaime Viña and
  • Sara Sánchez

14 November 2018

In the present research the fracture behavior in mode I under static loading of two aircraft quality composites materials has been analyzed at different test temperatures. The composites under study are made of the same unidirectional AS4 carbon fibe...

(This article belongs to the Proceedings of The 2nd International Research Conference on Sustainable Energy, Engineering, Materials and Environment)
  • Article
  • Open Access
2 Citations
2,595 Views
10 Pages

15 December 2020

The effect of Ti and B microalloying on the hardenability, prior austenite grain size (PAGS), mechanical properties, and sulfide stress cracking (SSC) of C110 grade steel was studied by Jominy testing, static tensile testing, an optical microscope (O...

  • Article
  • Open Access
14 Citations
4,228 Views
19 Pages

29 April 2021

The development of advanced composite materials has taken center stage because of its advantages over traditional materials. Recently, carbon-based advanced additives have shown promising results in the development of advanced polymer composites. The...

(This article belongs to the Special Issue Mechanics of Polymer and Polymer Composite Materials and Structures)
  • Article
  • Open Access
2 Citations
2,712 Views
17 Pages

A CNT-Toughened Strategy for In-Situ Repair of Aircraft Composite Structures

  • Tengfei Yang,
  • Shiyong Chu,
  • Bin Liu,
  • Fei Xu and ,
  • Bo Wang and
  • Chengwei Wu
  • + 1 author+ 0 author

1 November 2022

This study aimed to develop an in-situ field-repair approach, especially for aircraft composite structures, to enhance the interlaminar toughness of plain-woven composites (PWCs) by adding multi-walled carbon nanotubes (MWCNTs). MWCNTs were dispersed...

(This article belongs to the Special Issue Advanced Composite Material Design and Manufacturing Technology for Aerospace Engineering)
  • Protocol
  • Open Access
4 Citations
3,555 Views
9 Pages

The Design and Feasibility of Optimal Treatment for Coronary Drug-Eluting Stent In-Stent Restenosis (OPEN-ISR)—A Prospective, Randomised, Multicentre Clinical Trial

  • Péter Márton Kulyassa,
  • Balázs Tamás Németh,
  • István Hizoh,
  • Laura Krisztina Jankó and ,
  • Zoltán Ruzsa,
  • Zoltán Jambrik,
  • Brúnó Bánk Balázs,
  • Dávid Becker,
  • Béla Merkely and
  • István Ferenc Édes
  • + 5 authors+ 0 author

2 February 2025

Introduction: Percutaneous coronary intervention (PCI) with drug-eluting stents (DES) is a cornerstone of the management of ischemic heart disease. However, in-stent restenosis (ISR) remains a significant clinical challenge, occurring in approximatel...

(This article belongs to the Special Issue Complex and High-Risk Coronary Interventional Procedures)
  • Article
  • Open Access
16 Citations
3,072 Views
16 Pages

Systematic Evaluation of Adhesion and Fracture Toughness in Multi-Material Fused Deposition Material Extrusion

  • Md Abu Jafor,
  • Neshat Sayah,
  • Douglas E. Smith,
  • Gianni Stano and
  • Trevor J. Fleck

9 August 2024

Material extrusion (MEX) additive manufacturing has successfully fabricated assembly-free structures composed of different materials processed in the same manufacturing cycle. Materials with different mechanical properties can be employed for the fab...

(This article belongs to the Section Polymeric Materials)
  • Article
  • Open Access
6 Citations
4,326 Views
15 Pages

13 July 2023

Spacecraft experience minimal mechanical loads in space, but with the development of reusable spacecraft for interplanetary exploration and repeated landings, structures will be subjected to increased mechanical stress. The impact of the space enviro...

  • Article
  • Open Access
13 Citations
2,841 Views
11 Pages

The Thickness Effect of PSF Nanofibrous Mat on Fracture Toughness of Carbon/Epoxy Laminates

  • Hamed Saghafi,
  • Ali Nikbakht,
  • Reza Mohammadi and
  • Dimitrios Zarouchas

22 June 2021

The geometrical features of nanofibers, such as nanomat thickness and the diameter of nanofibers, have a significant influence on the toughening behavior of composite laminates. In this study, carbon/epoxy laminates were interleaved with polysulfone...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
13 Citations
3,753 Views
12 Pages

Prediction of the Delamination at the Steel and CFRP Interface of Hybrid Composite Part

  • Jun-Su Park,
  • Jae-Hong Kim,
  • Joon-Hong Park and
  • Dae-Cheol Ko

21 October 2021

The purpose of this study was to predict the adhesive behavior of steel and carbon-fiber-reinforced plastic (CFRP) hybrid parts based on the cohesive zone model (CZM). In this study, the steel sheet and CFRP were joined by epoxy resin in the CFRP pre...

(This article belongs to the Special Issue Advances in Manufacturing Technology of Metal/Composite Hybrid Structures)

of 3