- Article
Up till now, there have been extremely contradictory opinions and inadequate results concerning surface segregation in binary platinum–palladium (Pt–Pd) nanoparticles, including the problems regarding segregating components, as well as th...
Up till now, there have been extremely contradictory opinions and inadequate results concerning surface segregation in binary platinum–palladium (Pt–Pd) nanoparticles, including the problems regarding segregating components, as well as th...
To meet the ever-growing worldwide electric vehicle demand, the development of advanced generations of lithium-ion batteries is required. To this end, modelling is one of the pillars for the innovation process. However, modelling batteries containing...
In this paper, a comprehensive model for LiFePO4 batteries is proposed to ensure high efficiency and safe operation. The proposed model has a direct correlation between its parameters and the electrochemical principles to estimate the state of charge...
In this study, we investigated the development of a computational fluid dynamics (CFD) model for simulating the physical and chemical processes in a zinc (Zn)–air fuel cell. Theoretically, the model was based on time-dependent, three-dimensiona...
Solid oxide fuel cells are becoming increasingly important in various applications, from households to large-scale power plants. However, these electrochemical energy conversion devices have complex behavior that is difficult to understand and optimi...
This study concerns the simulation of copper electrodeposition and related phenomenological and technological aspects as influenced by electrode geometry and electrolyte flow velocity. A multiphysics simulation approach was employed, integrating math...
In this work, a design optimization study was conducted to improve the performance of a membraneless microfluidic fuel cell with a double-bridge cross-section of the flow channel. Governing equations including Navier–Stokes, mass-transport, and...
Chronoamperometric curves for the oxidation of a ferrocenyl derivative via a potential step, calculated using the Cottrell equation, showed less diffusion-controlled currents on a platinum wire electrode. This lower deviation cannot be explained via...
A study has been presented on the effects of intrinsic mechanical parameters, such as surface stress, surface elastic modulus, surface porosity, permeability and grain size on the corrosion failure of nanocomposite coatings. A set of mechano-electroc...
In this work, a three-dimensional microstructure-scale model of a Solid Oxide Fuel Cell’s Positive-Electrolyte-Negative assembly is applied for the purpose of investigating the impact of decreasing the electrolyte thickness on the magnitude, an...
A transient three-dimensional comprehensive numerical model was established to study ion transport caused by diffusion, convection, and electro-migration in the electro-refining process for scrap-metal recycling. The Poisson–Nernst–Planck...
Electrokinetic mechanisms of platinum catalyst degradation in polymer electrolyte membrane fuel cells are represented by platinum ion dissolution and platinum oxide formation. The other primary mechanism of degradation is the diffusion of platinum pa...
Cyclic Voltammetry is an analysis method for characterizing the behaviors of electrochemically active materials by measuring current through defined potential sweeps. The current–potential relationship depends on key variables such concentratio...
Based on fuel crossover behavior and bubble nucleation in the microfluidic fuel cell’s channel, this research numerically presents the performance of air-breathing direct formic acid microfluidic fuel cells. In the simulation, a three-dimension...
This study develops and tests an integrated structural equation model (SEM) linking Butler’s Tourism Area Life Cycle (TALC), residents’ quality of life (QoL), and community participation in sustainable tourism governance (STG) across thre...
The escalating demand for efficient thermal management in lithium-ion batteries necessitates precise characterization of their thermal behavior under diverse operating conditions. This study develops a three-dimensional (3D) electrochemical–the...
Reported rate constants of charge transfer reactions (CTs) have ranged widely, depending on techniques and timescales. This fact can be attributed to the time-dependent double-layer capacitance (DLC), caused by solvent interactions such as hydrogen b...
A laminar flow micro fuel cell comprising of bridge-shaped microchannel is investigated to find out the effects of the cross-section shape of the microchannel on the performance. A parametric study is performed by varying the heights and widths of th...
Hydrogen is an essential vector for transitioning today’s energy system. As a fuel or reactant in critical industrial sectors such as transportation and metallurgy, H2 can diversify the energy mix and supply and provide an opportunity to mitiga...
The Gibbs equation describes the relationship between the enthalpy (∆H), entropy (∆S), and Gibbs energy (∆G) changes in physicochemical processes: ∆G = ∆H − T∆S. It remains a cornerstone of chemical thermodyn...
Normally, the Nernst voltage calculated from the concentration of the reaction gas in the flow channel is considered to be the ideal voltage (reversible voltage) of the hydrogen-oxygen fuel cell. The Nernst voltage loss in fuel cells in most of the c...
Lithium-ion batteries are a promising type of energy storage for renewable energy applications owing to their high energy density. Extensive research has therefore been carried out, utilizing both experimental and computational methods to aid in a de...
The demand for green hydrogen is increasing, as it is estimated to reduce ten percent of total global green-house-gas emissions from fossil fuel. The solid oxide electrolysis cell (SOEC) is an electrochemical energy-conversion device (EECD) that prod...
In this research, we investigate the connection between an observed enhancement in solid oxide fuel cell stack performance and the evolution of the microstructure of its electrodes. A three dimensional, numerical model is applied to predict the porou...
Metal electrodeposition on additively manufactured lattice structures enables the creation of functionally graded hybrid components with enhanced mechanical properties. However, predicting coating thickness distribution remains challenging due to com...
This study was designed with a focus on self-enhancement by flying in first class to understand the intricate associations in the formation of well-being, brand attachment, and word-of-mouth. In addition, this study aimed to examine the moderating ef...
The charging safety of electric vehicles is an area of focus in the electric automobile industry. For the purpose of ensuring safety, charging electric vehicles as soon as possible is a goal pursued by the public. In order to ensure the safety of ele...
Novel three-dimensional discrete lens antennas characterized by a number of focal points ranging from one to five and defined explicitly via analytical equations are presented in the paper. A procedure to derive rotationally symmetric afocal lenses s...
In this paper, the passivation kinetics of AA2098–T851 was investigated by a fundamental theoretical interpretation of experimental results based on the mixed potential model (MPM). The steady state passive layer formed on the AA2098–T851...
A double-bridge shape is proposed as a novel flow channel cross-sectional shape of a membraneless microfluidic fuel cell, and its electrochemical performance was analyzed with a numerical model. A membraneless microfluidic fuel cell (MMFC) is a micro...
Metal corrosion poses a significant challenge for industries by decreasing the lifespan of materials and escalating maintenance and replacement costs. This study is critically important, as it assesses the corrosion resistance properties of annealed...
Metallic zinc (Zn) presents a compelling alternative to conventional electrochemical energy storage systems due to its environmentally friendly nature, abundant availability, high water compatibility, low toxicity, low electrochemical potential (&min...
Intermediate temperature-solid oxide fuel cell (IT-SOFC) Ni-(ZrO2)x(Y2O3)1−x (Ni-YSZ) anodes formed by two layers, with different thicknesses and morphologies, offer the possibility of obtaining adequate electrochemical performance coupled to satisfa...
Bioelectrochemical systems have been the focus of extensive research due to their unique advantages of converting the chemical energy stored in waste to electricity. To acquire a better understanding and optimize these systems, modelling has been emp...
We present a corrosion internal state variable (ISV) damage model based upon the integrated computational materials engineering (ICME) hierarchical multiscale paradigm. Structure–property experiments for magnesium alloys were used where the onl...
Small; lithographically-defined and closely-spaced metallic features of dimensions and separation in the micrometer range are of strong interest as working and counter electrodes in compact electrochemical sensing devices. Such micro-electrode system...
Loss of electrochemical surface area in proton-exchange membrane is of large practical importance, since membrane degradation largely affects the durability and life of fuel cells. In this paper, the electrokinetic model developed by Holby and Morgan...
We have proposed a data-driven approach for designing the mesoscale porous structures of Li-ion battery electrodes, using three-dimensional virtual structures and machine learning techniques. Over 2000 artificial 3D structures, assuming a positive el...
The model proposed in this study was based on the assumption that the biomass attached to the anode served as biocatalysts for microbial fuel cell (MFC) exoelectrogenesis, and this catalytic effect was quantified by the exchange current density of an...
This study investigates the effects of anode and cathode inlet flow rates (ṁ) on the power performance of bipolar plates in a polymer electrolyte membrane fuel cell (PEMFC). The primary objective is to derive optimal flow rate conditions by com...
The use of indirect electrical techniques is gaining interest for monitoring the corrosion of steel in concrete as they do not require any connection to the rebar. In this paper, we provide insights into the physical aspects of the indirect galvanost...
Electrochemical sensors have been used for many decades. However, the modeling of such sensors used in electrolysis mode is poorly documented, especially in the case of multiple gases’ parallel actions. These are of great interest since they co...