The objective of the study was to prepare vinblastine microparticles by supercritical antisolvent process using N-methyl-2-pyrrolidone as solvent and carbon dioxide as antisolvent and evaluate its physicochemical properties. The effects of four proce...
This research investigates the heat treatment parameters of 6061-aluminum alloy to enhance its mechanical properties. The Taguchi design-of-experiments (DOE) method was employed to systematically examine the effects of solutionizing temperature, solu...
For the purpose of investigating the microstructure deformation of 28Mn-10Al-C steel at high speeds under different strain rates, the dynamic properties of 28Mn-10Al-C steel under varying strain rates and the feasibility of the tensile specimens with...
Rapid development in the printing and dying industry produces large amounts of wastewater, and its discharge in the environment causes pollution. Keeping in view the carcinogenic and mutagenic properties of various dyes, it is important to treat dyed...
A high-velocity oxygen fuel (HVOF) system was employed to prepare a Fe49.7Cr18Mn1.9Mo7.4W1.6B15.2C3.8Si2.4 amorphous coating on mild steel. The electrochemical behavior of the resultant coatings, namely as-sprayed coating and vacuum heat-treated coat...
A new tetranuclear mixed-valence manganese(II/IV) compound [MnIIMnIV3(μ-Cl)3(µ3-O)(L)3] (1) (where H3L = (3E)-3-((Z)-4-hydroxy-4-phenylbut-3-en-2-ylideneamino)propane-1,2-diol) has been synthesized and characterized by different physicochemi...
In this study, solution enhanced dispersion by supercritical fluids (SEDS) technique was applied for the preparation of 5-aminosalicylic acid (5-ASA) loaded Eudragit S100 (EU S100) nanoparticles. The effects of various process variables including pre...
The knowledge about the solid forms landscape of Bilastine (BL) has been extended. The crystal structures of two anhydrous forms have been determined, and the relative thermodynamic stability among the three known anhydrous polymorphs has been establ...
High-temperature plane-strain compression tests were performed on Fe-3.0 wt.% Si alloy from 900 °C to 1150 °C at strain rates of 5 s−1 to 1 s−1, and the texture development from different initial textures was investigated by means...
Molybdenum (Mo), which is one among the refractory metals, is a promising material with a wide variety of technological applications in microelectronics, optoelectronics, and energy conversion and storage. However, understanding the structure–p...
The standard NACE MR0175 (ISO 15156) requires a maximum hardness value of 23 HRC for 13Cr-4Ni-(Mo) steel grade for sour service, requiring a double tempering heat treatment at temperature in the range 648–691 °C for the first tempering and 593–621 °C...
The “electron wind effect” has long been cited as a potential catalyst of solid-state transformations in metals, particularly when high current densities are involved. However, the literature exploring similar effects at lower current den...
Texture and microstructure evolution during high-temperature plane-strain compression in Fe-3.0 wt.% Si alloy has been investigated by micro-texture analysis and modeling. In this study, hot deformation test is performed on the temperature range of 9...
Azithromycin (AZI) is one of the most commonly used macrolide antibiotics in children, but has the disadvantages of a heavy bitter taste and poor solubility. In order to solve these problems, hot-melt extrusion (HME) was used to prepare azithromycin...
The aim of this study is to assess the process of synthesizing potassium-based geopolymers (KGL) into leucite ceramics with regard to five variables, namely, alkaline solution ratio (R), sintering time (S), calcining temperature (T), mixing time (M),...
An option to improve the leaching efficiency of chalcopyrite is pretreatment prior to leaching. Pretreatment variables, such as the curing time and the addition of chloride, can increase the kinetics of copper extraction, particularly for sulphide or...
The transesterification of waste frying oil (WFO) with methanol in the presence of potassium hydroxide catalyst supported on Jatropha curcas fruit shell activated carbon (KOH/JS) was studied. The catalyst systems were characterized by X-ray diffracti...
The study was carried out to evaluate five SiMo cast iron grades and their resistance to chemical corrosion at elevated temperature. Corrosion tests were carried out under conditions of an actual cyclic operation of a retort coal-fired boiler. The du...
Liquid crystalline self-assembly offers the potential to create highly ordered, uniformly aligned, and defect-free thin-film organic semiconductors. Analogues of one of the more promising classes of liquid crystal semiconductors, 5,5”-dialkyl-α-terth...
This study investigates the magnetization mechanisms in MnZn ferrites, which are key materials in high-frequency power electronics, to understand their behavior under various sintering conditions. Employing X-ray diffraction and scanning electron mic...
The effect of electroslag remelting (ESR) with CaF2-based synthetic slag on the microstructure and mechanical properties of three as-quenched martensitic/martensitic-bainitic ultrahigh-strength steels with tensile strengths in the range of 1250&ndash...
Cinnamomum longepaniculatum essential oil (CLEO) possesses antibacterial, anti-inflammatory, and antioxidant activities. However, CLEO shows volatilization and poor solubility, which limits its application field. In this research, inclusion complexes...
We have investigated the structural, magnetic, and electrical transport properties of Pr0.7 Sr0.3 Mn(1−x)Cox O3 nanopowders (x = 0, 0.05, 0.10 and 0.15). The Pechini Sol-gel method was used to synthesize these nanopowders. X-ray diffraction at...
Two neutral copper(I) halide complexes ([Cu(BTU)2X], X = Cl, Br) were prepared by the reduction of the corresponding copper(II) halides (chloride or bromide) with a benzoylthiourea (BTU, N-(3,4-diheptyloxybenzoyl)-N′-(4-heptadecafluorooctylphen...
We report the deposition and characterization of calcium lead titanate (PCT) thin films for pyroelectric detectors. PCT films of thicknesses ranging from ~250 to 400 nm were deposited on both silicon and Si/SiN/Ti/Au substrates at 13 mTorr pressure b...
Carbonate thermochemical activation is a promising approach for modifying the mineralogical structure of nepheline–red mud mixtures prior to subsequent alkaline processing. However, quantitative statistical relationships between activation para...
Background: Lamivudine is widely used alone or in combination with other anti-HIV drugs in the infant to adolescent age groups of pediatric populations. Compounding of medications is frequently used for pediatric patients. However, many issues have b...
As a key parameter in the adsorption process, removal rate is not available under most operating conditions due to the time and cost of experimental testing. To address this issue, evaluation of the efficiency of NH4+ removal from stormwater by coal-...
The properties of the final product obtained by solidification directly result from the thermal variables during solidification. This study aims to analyze the influence of thermal solidification variables on the hardness, microstructure, and phases...
In the present study, new magnetic nanocomposites were successfully prepared by combustion method, characterized by X-ray diffraction, Fourier transform infrared spectroscopy, magnetic measurements, N2 adsorption–desorption thermal analysis, and scan...
A calcium deficient hydroxyapatite (CDHA) forming cement with a bimodal grain size distribution, composed of α-TCP and fine grained CDHA at a weight ratio of 9:1, was modified by the addition of sodium phytate (IP6) in variable amounts ranging...
Vitamin E consists of a group of compounds including α- β- γ- and δ-tocopherols and α- β- γ- and δ-tocotrienols, containing the chroman-6-ol system. The recognition of the structural and dynamic propertie...
Psychrophilic organisms are able to grow at temperatures down to −15 °C, while hyperthermophiles can multiply at temperatures up to 122 °C. What structural changes in extremophile proteins are needed to maintain stable and biochemically...
A novel heterogeneous catalyst composite (CuS-FeS/SiO2) derived from rice husk silica was engineered following pyrolysis, chemical precipitation, and chemical redox technique. The resulting catalyst was applied to the conversion of palm fatty acid di...
Valencianite has been described as a variety of K-feldspar (adularia) from La Valenciana mine, Guanajuato, Mexico, from which three samples were used for this study. We present new major and trace element analysis, X-ray powder diffraction with Rietv...
Additive manufacturing, particularly selective laser melting, presents exciting possibilities for fabricating components from high-temperature nickel-based superalloys. Controlling microstructural features and minimizing defects in fabricated specime...
Understanding the interfacial changes of wood during heat treatment can facilitate the improvement of the bonding and coating processes of heat-treated wood. Steam was used as the medium to modify Pinusmassoniana wood through heat treatment at 160, 1...
The study of the micromechanical performance of materials is important in explaining their macrostructural behavior, such as fracture and fatigue. This paper is aimed, among other things, at reducing the deficiency of microstructural models of grey c...
Quantitative phase imaging can reveal morphological features without having to stain the biological sample. This property has important implications for intraoperative applications since the time spent during histopathology can be reduced from a few...
The structural properties of VO2 thin films, grown on either LSAT or Si substrates by pulsed laser deposition (PLD), are elucidated by means of transmission electron microscopy (TEM) methods. The TEM observations confirmed the successful growth of VO...
In pyrometallurgical processes refining copper, the main source of loss in the conversion stage is from slag. This paper reports on research work treating converter slag containing high percentages of copper (36 wt%) using ammonium hydroxide at room...
Three-dimensional (3D) printing has emerged as a new promising technique for the production of personalized dosage forms and medical devices. Polyvinyl alcohol is prominently used as a source material to produce 3D-printed medicines via fused deposit...
The sol–gel process is a wet chemical technique that allows very fine control of the composition, microstructure, and final textural properties of materials, and has great potential for the synthesis of endodontic cements with improved properti...
This work employed a design-of-experiments (DoE) strategy, specifically a 23 full factorial design, to assess how suspension concentration (0.001–0.002 g/mL), substrate temperature (60–80 °C), and deposition height (10–15 cm) in...
In India, during mining and ore processing, ore fine generation is a common phenomenon, in which more than 60% of process ore becomes discarded material. To explore the alternative of high-grade ores, mutual replacement with the utility of dump ore f...
Guanidinium-intercalated derivatives of α- and γ-zirconium hydrogen phosphate, zirconium 2-sulfoethylphosphonate, and zirconium 4-sulfophenylphosphonate were successfully synthesized by treatment of the host materials with aqueous guanidi...
ZBLAN (ZrF4-BaF2-LaF3-AlF3-NaF) fluoride glass is a promising infrared optical fiber material because of its wide transmission window and low theoretical attenuation; however, unwanted crystallization during thermal processing can introduce scatterin...
This study aims to quantify the effect of process parameters on the anodizing of Al6061 aluminum. To achieve this, studies on layer thickness, the porosity of the anodized surface, electrochemical techniques, X-ray diffraction, grain size estimation,...
Potassium is used extensively as a promoter with iron catalysts in Fisher–Tropsch synthesis, water–gas shift reactions, steam reforming, and alcohol synthesis. In this paper, the identification of potassium chemical states on the surface...
Clay mineralogy and diagenesis affect the reservoir quality of the Neogene Surma Group in the Hatiya trough of Bengal Basin, Bangladesh. X-ray diffraction and scanning electron microscopic analyses of diagenetic clay minerals from Shahbazpur#2 well r...
of 6