Black titania, a conductive ceramic material class, has garnered significant interest due to its unique optical and electrochemical properties. However, synthesising and properly characterising these structures pose a considerable challenge. This div...
In addition to its traditional application in white pigments, nanocrystalline titania (TiO2) has optoelectronic and photocatalytic properties (strongly dependent on crystallinity, particle size, and surface structure) that grant this naturally occurr...
Plasmonic photocatalysts have gained more and more attention because of possible applications for solar energy conversion, environmental decontamination, and water treatment. However, the activity under visible light is usually very low, and the prop...
In this research, changes in several characteristics of partially reduced titania were studied. The reduction process used made it possible to gradually observe changes in the material depending on the amount of reducing agent used. We used NaBH4 to...
The titania pulp—a semi product received from the industrial production of titania white—was submitted for the thermal heating at 400–600 °C under Ar and H2 to obtain TiO2 with different structure and oxygen surface defects. Hea...
Anodic titania nanotubes (TiO2-NT) are very promising for use in photocatalysis and photovoltaics due to their developed surface, symmetrical structure and conductive properties, which, moreover, makes them a convenient matrix for creating various na...
Ca-doped TiO2 films were synthesized by the modified sol-gel method and employed as the electron transport material of perovskite solar cells (PSCs). Morphological, optoelectronic, thermal, and electrical studies of thin films were investigated throu...
Water pollution is considered a serious threat to human life. An advanced oxidation process in the presence of semiconductor photocatalysts is a popular method for the effective decomposition of organic pollutants from wastewater. TiO2 nanoparticles...
Polycarbonate (PC) is susceptible to environmental stress cracking (ESC) when the conditions of pre-strain and presence of fluid with a compatible solubility index are both prevalent. One approach to counter this involves using nanoscale fillers to b...
Hybrids of semiconductor nanomaterials often demonstrate properties that are superior to those of their components. In this study, we prepared hybrid nanomaterials of TiO2 and ZnO, which are among the most actively studied semiconductors, by means of...
Heterostructures formed by anatase nanotitania and bidimensional semiconducting materials are expected to become the next-generation photocatalytic materials with an extended operating range and higher performances. The capability of fabricating opti...
In this work, we studied the phases in a Mg-Ti-O system using a 1:1 formulation of MgO:TiO2, mixing synthetic brucite of Mexican origin with TiO2 microparticles of high purity, with a heat treatment at 1100 °C for 1 h. Due to its valence electron...
Glycerol aqueous phase reforming (APR) produces hydrogen and interesting compounds at relatively mild temperatures. Among APR catalysts investigated in literature, little attention has been given to Pt supported on TiO2. Therefore, herein we propose...
Titanium dioxide nanoparticles (nano-titania/TiO2 NPs) are used in different fields and applications. However, the release of TiO2 NPs into the environment has raised concerns about their biosafety and biosecurity. In light of the evidence that TiO2...
This paper proposes the preparation and formula analysis of anti-biofouling Titania–polyurea (TiO2–SPUA) spray coating, which uses nano-scale antibacterial and photocatalytic agents, titanium dioxide, to construct regularly hydrophobic su...
The impact of a titania (TiO2) support film surface on the catalytic activity of gold nanoparticles (Au NP) was investigated. Using the reactive dc-magnetron sputtering technique, TiO2 films with an amorphous, anatase, and nitrogen-doped anatase crys...
Organic-inorganic hybrid materials are attractive due to the combination of properties from the two distinct types of materials. In this work, transparent titania-polydimethylsiloxane hybrid materials with up to 15.5 vol. % TiO2 content were prepared...
Ir-based catalysts are the best in terms of activity and stability for oxygen evolution reactions (OERs) in proton exchange water electrolysis. Due to their cost, efforts have been made to decrease their load without a loss of activity. In this paper...
Inorganic nano-scale heterostructures have many advantages over hybrid organic-inorganic dye-sensitized solar cells (DSSC or Grätzel cells), including their resistance to photo-bleaching, thermal stability, large specific surface areas, and general...
Protolytic reactions on the surface of a titania photocatalyst (TiO2 P25 containing chlorine impurities) were studied using potentiometric and calorimetric acid-base titration. The impurity was removed by either washing or heat treatment. The efficie...
The availability of clean drinking water is a significant problem worldwide. Many technologies exist for purifying drinking water, however, many of these methods require chemicals or use simple methods, such as boiling and filtering, which may or may...
Anodized TiO2 nanotubes have received much attention for their use in solar energy applications including water oxidation cells and hybrid solar cells [dye-sensitized solar cells (DSSCs) and bulk heterojuntion solar cells (BHJs)]. High surface area a...
5-Hydroxymethylfurfural, which can be derived from lignocellulosic biomass, can be transformed via the hydrodeoxygenation process to potential biofuels, such as 2,5 dimethylfuran or other chemicals of industrial importance. Non-noble metal catalysts...
Preparation of TiO2 using the hydrothermal treatment in NH4OH solution and subsequent thermal heating at 500–700 °C in Ar was performed in order to introduce some titania surface defects. The highest amount of oxygen vacancies and Ti3+ surf...
TiO2 was placed in heat-treatment at the temperature of 400–500 °C under flow of hydrogen gas in order to introduce some titania surface defects. It was observed that hole centers in TiO2 were created during its heat treatment up to 450 °C, whereas a...
Recently, the ultrasound-assisted sol-gel synthesis procedure of mesoporous titania (TiO2) photocatalysts caught the researcher’s attention, due to the physicochemical properties enhancement of the resulting titania nanomaterials. Thus, by vary...
TiO2/SBA-15 photocatalysts were successfully prepared by impregnating low loading titania to SBA-15 via slow calcination. The photocatalyst is efficient for fast methylene blue removal via adsorption and photodegradation methods. The impregnation of...
TiO2 photocatalysis is considered as an alternative to conventional disinfection processes for the inactivation of waterborne microorganisms. The efficiency of photocatalysis is limited by charge carrier recombination rates. When the photocatalyst is...
Two series of novel integral asymmetric monophasic hybrid membranes, cellulose acetate/silica/titania (CA/SiO2/TiO2—series 1) and cellulose acetate/titania (CA/TiO2—series 2), were developed by the coupling of sol-gel technology and a mod...
Titania containing cubic MCM-48 mesoporous materials were synthesized successfully at room temperature by a modified Stöber method. The integrity of the cubic mesoporous phase was retained even at relatively high loadings of titania. The TiO2-MCM-48...
Laser synthesis was used for one-step synthesis of titania/graphene composites (G-TiO2 (C)) from a suspension of 0.04 wt% commercial reduced graphene oxide (rGO) dispersed in liquid titanium tetraisopropoxide (TTIP). Reference titania sample (TiO2(C)...
Solar light active photocatalyst was prepared as silver phosphate (Ag3PO4) coating on titania–silica (TiO2–SiO2) microspheres. Titania–silica microsphere was obtained by spray drying TiO2–SiO2 colloidal solutions, whereas Ag3P...
The efficient electron transport layer (ETL) plays a critical role in the performance of perovskites solar cells (PSCs). Ideally, an unobstructed network with smooth channels for electron flow is required, which is lacking in the pristine TiO2-based...
TiO2 was loaded on the porous nickel foam from the suspended ethanol solution and used for the photocatalytic removal of NOx. Such prepared material was heat-treated at various temperatures (400–600 °C) to increase the adhesion of TiO2 with...
Titanium dioxide (TiO2) is an important photocatalyst that is widely studied for environmental applications, especially for water treatment by degradation of pollutants. A range of methods have been developed to produce TiO2 in the form of nanopartic...
In this work, the alumina (Al2O3) and alumina-titania coatings with different contents of TiO2, i.e., Al2O3 + 13 wt.% TiO2 and Al2O3 + 40 wt.% TiO2, were studied. The coatings were produced by means of powder and liquid feedstock thermal spray proces...
Laccase amperometric biosensors were developed to detect the catechol compound. The laccase enzyme (LAC) immobilization was performed on nanostructures of (a) titania (TiO2); (b) titania/Nafion (TiO2/NAF) (both immobilized by the sol-gel method) and...
Titania (TiO2) nanosheets are crystals with controlled, highly ordered structures that improve the functionality of conventional TiO2 nanoparticles. Various surface modification methods have been studied to enhance the effectiveness of these material...
Titania has properties that enable it to be used in a variety of applications, including self-cleaning surfaces, air and water purification systems, hydrogen evolution, and photoelectrochemical conversion. In order to improve the properties of titani...
During the process of electroslag remelting (ESR) of steel containing titanium and aluminum, the activity ratio between titania and alumina in CaF2-CaO-MgO-Al2O3-TiO2 slag must be fixed in order to guarantee the titanium and aluminum contents in the...
This work demonstrates a completely wet-chemical procedure for the fabrication of a functional impedimetric humidity-sensing device on a titania (TiO2) surface. Optically transparent anatase TiO2 thin films were deposited on a glass substrate via dip...
Titania (TiO2) has attracted much attention recently for reducing bacterial diseases by the generation of reactive oxygen species (ROS) under UV irradiation. However, demand for higher photocatalytic activity due to higher recombination of electron a...
TiO2/montmorillonite composites were synthesized using inverse micellar route for the preparation of titania nanoparticles (4–6 nm diameter) in 1-hexanol and for the dispersion of one of the clay components. Two series of composites were obtain...
Up to now, the use of TiO2 has been considered a promising advanced technology for organic pollutants removal from air or water, since it has high biological and chemical stability, high photoactivity, low toxicity, and low-cost production. However,...
Advanced oxidation processes stand as green alternatives for the decontamination of waste waters. Photocatalysis is an advanced oxidation process in which a semiconductor material absorbs photon energy and triggers redox reactions capable of degradin...
The osseointegration of titanium implants is allowed by the TiO2 layer that covers the implants. Titania can exist in amorphous form or in three different crystalline conformations: anatase, rutile and brookite. Few studies have characterized TiO2 co...
Anodic oxidation is an easy and cheap surface treatment to form nanostructures on the surface of titanium items for improving the interaction between metallic implants and the biological environment. The long-term success of the devices is related to...
The use of nanofluids for heat transfer has been examined in recent years as a potential method for augmentation of heat transfer in different systems. Often, the use of nanoparticles in a working fluid does not disrupt the system in significant ways...
Light-driven processes can be regarded as a promising technology for chemical production within the bio-refinery concept, due to the very mild operative conditions and high selectivity of some reactions. In this work, we report copper oxide (CuO)-tit...
A bio-inspired nanofibrous MnO2-TiO2-carbon composite was prepared by utilizing natural cellulosic substances (e.g., ordinary quantitative ashless filter paper) as both the carbon source and structural matrix. Mesoporous MnO2 nanosheets were densely...
of 10