Temperature-dependent near-infrared (NIR) spectroscopy has been developed and taken as a powerful technique for analyzing the structure of water and the interactions in aqueous systems. Due to the overlapping of the peaks in NIR spectra, it is diffic...
Elastoplastic analysis of a composite cylinder, consisting of an isotropic elastic inclusion surrounded by orthotropic matrix, is conducted via numerical parametric studies for examining its residual stress under thermal cycles. The matrix is assumed...
As the water molecules found at the interface of lipid bilayers exhibit distinct structural and reorientation dynamics compared to water molecules found in bulk, the fluctuations in their hydrogen bond (HB) network are expected to be different from t...
Mobility spectrum analysis (MSA) is a method that enables the carrier density (and mobility) separation of the majority and minority carriers in multicarrier semiconductors, respectively. In this paper, we use the p-GaAs layer in order to demonstrate...
Thermal conductivity is one of the most important thermophysical properties of a melt-cast explosive. However, the temperature-dependent thermal conductivity of such explosives cannot be easily measured across the whole solidification process (includ...
In the paper, an equation with two delay times (dual-phase lag Equation (DPLE)) in a version that takes into account the dependence of thermophysical parameters (volumetric specific heat and thermal conductivity) on temperature is considered. In part...
Rubber-based materials are widely used in a variety of industrial applications. In these applications, rubber components withstand various loading conditions over a range of temperatures. It is of great significance to study the mechanical behavior o...
This study comprehensively investigates the frequency- and temperature-dependent viscoelastic properties of two elastomer materials, focusing on the comparison between experimental results and theoretical models derived from Prony series coefficients...
Explicit expressions are obtained for sensitivity coefficients to separately estimate temperature-dependent thermophysical properties, such as specific heat and thermal conductivity, in two-dimensional inverse transient heat conduction problems for b...
The mechanical response of geomembranes in hydraulic structures is strongly influenced by temperature variations, which alter both material stiffness and interface shear strength behavior. This study develops a non-linear, temperature-dependent tensi...
The temperature-dependent photoluminescence of CsPbBr3/SiO2 and CsPbI3/SiO2 nanocrystals was investigated to understand the thermal stability of SiO2 encapsulation. At increased temperature, intensity quenching, linewidth broadening, energy level shi...
Hydrogen uptake/diffusivity in nitrile butadiene rubber (NBR) blended with carbon black (CB) and silica fillers was measured with a volumetric analysis method in the 258–323 K temperature range. The temperature-dependent H2 diffusivity was obta...
Solid-state photon-enhanced thermionic emission (PETE) solar energy converters are newly proposed devices that can directly convert solar energy into electrical power at high temperatures. An analytical model based on a one-dimensional steady-state e...
This article is devoted to the mathematical analysis of a heat and mass transfer model for the pressure-induced flow of a viscous fluid through a plane channel subject to Navier’s slip conditions on the channel walls. The important feature of o...
The vibrational dynamics of rutile (TiO2) as a function of temperature has been studied by combining molecular dynamics (MD) simulations in conjunction with the generalized two-dimensional correlation spectroscopy analysis (2D COS) technique. Molecul...
Since the temperature of a photovoltaic (PV) module is not consistent as it was estimated at a standard test condition, the thermal stability of the solar cell parameters determines the temperature dependence of the PV module. Fill factor loss analys...
Thermal conductivity, λ, and volumetric heat capacity, ρcp, variables that depend on temperature were simultaneously estimated in a diverse technique applied to AISI 1045 and AISI 304 samples. Two distinctive intensities of heat flux were imposed to...
Various studies on the envelope renovation of existing residential buildings have quantified energy savings effects across various climate conditions and building types yet have also reported discrepancies between predicted and actual energy savings...
Static analysis is conducted for functionally graded material (FGM) spherical shells under thermo-mechanical loads, based on the three-dimensional thermo-elasticity theory. The material properties, which vary with both the radial coordinate and tempe...
Granulometric aggregate fractions (20 µm–2 mm) of chernozem soils with different agriculture-use histories (native steppe, permanent bare fallow, arable land, and shelterbelt) were investigated in mid-IR and far IR regions (4000–100...
As a safety device, a rupture disc instantly bursts as a nonreclosing pressure relief component to minimize the explosion risk once the internal pressure of vessels or pipes exceeds a critical level. In this study, the influence of temperature on the...
Sous vide, a cooking method that involves vacuum-sealed fish at low temperatures, yields a uniquely tender, easily flaked texture. Previous research on sous-vide tenderization has focused on thermal protein denaturation. On the other hand, the contri...
Human tyrosinase (Tyr) is a glycoenzyme that catalyzes the first and rate-limiting step in melanin production, and its gene (TYR) is mutated in many cases of oculocutaneous albinism type 1 (OCA1). The mechanisms by which individual mutations contribu...
This study presents a methodology for characterizing the constituent properties of composite materials by back-calculating from the laminate behavior under fatigue loading. Composite materials consist of fiber reinforcements and a polymer matrix, wit...
The aim of this research is to demonstrate the concept and ability for the fast and preliminary screening of complex food and environmental samples for the presence of endocrine disrupters fractions, consisting of low-molecular mass micropollutants,...
A 166-nm-thick amorphous Niobium pentoxide layer (Nb2O5) on a silicon substrate was investigated by using time domain thermoreflectance at ambient temperatures from 25 °C to 500 °C. In the time domain thermoreflectance measurements, thermal t...
This study explores the temperature dependence of reverse-recovery behavior in superjunction metal-oxide-semiconductor field-effect-transistors (MOSFETs) using experiments and Technology Computer-Aided Design (TCAD) simulations. Results show that at...
This study investigates the free vibration behaviors of functionally graded (FGM) plates with a porous structure, resting on a Kerr-type elastic foundation, while accounting for thermal effects and complex material property distributions. Within the...
The heat transfer performances of ionic liquids [C4mpyrr][NTf2] and ionanofluids with Al2O3 nanoparticles under a laminar flow regime, and with constant heat flux on the tube wall is numerically modeled and analyzed for three values of initial/inlet...
Glass transitions, melting, crystallization, and the isotropization of polymers are connected with changes in the density, respectively the specific volume (Vsp), which can be analyzed by dilatometric methods. Here, the pressure dependence of such tr...
The roll coating method is of considerable significance in several industries, as it is applied practically in the production of paint, the manufacturing of PVC-coated cloth, and the plastic industry. The current study theoretically and computational...
Interior permanent magnet synchronous motors (IPMSMs) are widely utilized due to their high power density. However, noise and vibration issues are often encountered in these motors. While researchers have extensively investigated individual aspects s...
In this research, we studied the impact of temperature dependent viscosity and thermal radiation on Eyring Powell fluid with porous channels. The dimensionless equations were solved using the perturbation technique using the Weissenberg number (&epsi...
The presented research addresses the problem of dependency analysis of the ultrasonic signal measured by a sensor in an engine oil bath. The dependency analysis is performed on a selected ultrasonic signal sensor solution containing its own generator...
The conventional temperature drift error (TDE) compensation model cannot decouple temperature dependence of Si-based materials because temperature correlated quantities (TCQ) have not been obtained comprehensively, and Micro-Electro-Mechanical System...
High-standing islands, such as Taiwan, offer unique opportunities to study soil organic carbon (SOC) dynamics due to their steep terrains, rapid erosion, and strong climatic gradients. In this study, we investigated 54 forest soil profiles across nor...
In contrast to most pathogenic oomycetes, which infect plants, Pythium insidiosum infects both humans and animals, causing a difficult-to-treat condition called pythiosis. Most patients undergo surgical removal of an affected organ, and advanced case...
Composite laminated structures, comprising various engineering materials, are extensively utilized in engineering structures due to their superior design flexibility and enhanced mechanical performance. This study investigates the mechanical behavior...
We investigate the structural, Hirshfeld surface, magnetic, and magnetodielectric properties of BiMn2O5. The sample can be indexed with an orthorhombic phase associated with space group Pbam, with crystallographic parameters a = 7.54946 Å, b = 8.5496...
In this paper, some representative hyperelastic constitutive models of rubber materials were reviewed from the perspectives of molecular chain network statistical mechanics and continuum mechanics. Based on the advantages of existing models, an impro...
Because the conventional Temperature Drift Error (TDE) estimation model for Capacitive MEMS Gyros (CMGs) has inadequate Temperature Correlated Quantities (TCQs) and inaccurate parameter identification to improve their bias stability, its novel model...
A thermodynamic model of a thermoelectric generator-driven thermoelectric heat pump (TEG-TEH) combined device is established considering the Thomson effect and the temperature dependence of the thermoelectric properties based on non-equilibrium therm...
Owing to the fact that the conventional Temperature Drift Error (TDE) precise estimation model for a MEMS accelerometer has incomplete Temperature-Correlated Quantities (TCQ) and inaccurate parameter identification to reduce its accuracy and real tim...
Although applications of low water-to-cement ratio mixtures to practical structures have been increasing to enhance seismic resistance and long-term durability in recent years, it was experimentally observed that such a mixture causes peculiar hydrat...
Single-Photon Avalanche Photodiodes (SPADs) are increasingly utilized in high-temperature-operated, high-performance Light Detection and Ranging (LiDAR) systems as well as in ultra-low-temperature-operated quantum science applications due to their hi...
The numerical investigation of magneto-hydrodynamic (MHD) mixed convection flow and entropy formation of non-Newtonian Bingham fluid in a lid-driven wavy square cavity filled with nanofluid was investigated by the finite volume method (FVM). The nume...
Introduction: Intra-abdominal pressure (IAP) has been recognized as an important vital sign in critically ill patients. Due to the high prevalence and incidence of intra-abdominal hypertension in surgical (trauma, burns, cardiac) and medical (sepsis,...
Fourier transform infrared spectroscopy in attenuated total reflectance geometry (FTIR-ATR), combined with a 2D correlation analysis, was here employed to investigate temperature-induced spectral changes occurring in a particular type of novel cellul...
This study aims to explore the dynamic response of ballastless tracks under various temperatures of the cement-emulsified asphalt (CA) mortar layer and other environmental factors. CA mortar is the key material in the ballastless track structure, exh...
The main purpose of cold chain is to keep the temperature of products constant during transportation. The internal temperature of refrigerated truck body is mainly measured with a temperature sensor installed at the hottest point on the body. Hence,...
of 91