The segregation kinetics of surface-active, residual elements are investigated in an in situ study of annealing scrap-based silicon electrical steel sheet where the arsenic (As) surface segregation is highlighted. During annealing in the temperature...
The Aksu River, a quintessential inland river, exhibits elevated arsenic (As) concentrations in certain sections of its natural waters. Further investigation is necessary to determine the role of surface water and groundwater (SW-GW) exchanges in con...
Arsenic (As) is considered one of the most serious inorganic pollutants, and the wastewater produced in some smelters contains a high concentration of arsenic. In this paper, we purified the high-concentration arsenic solution with red mud and Fe3+ s...
In this study, a functional surface coating composed of Fe-Mn binary oxide (FM) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS, PP) was applied to a PVDF membrane (PP-FM-PVDF) for efficient arsenate (As(V)) removal. PP acts as...
Aluminum-impregnated food waste was selected as a filter medium for removing As(III) from aqueous solutions. The modification of food waste and its carbonization conditions were optimized using the Box–Behnken model in the response surface meth...
2 March 2018
The mining activity in the San Antonio-El Triunfo district, located in a mountainous region at 60 km southeast of La Paz, occured for more than 250 years and left behind severe contamination of soils and riverbed sediments which led to elevated conce...
Modern and future nanoelectronic and nanophotonic applications require precise control of the size, shape and density of III-V quantum dots in order to predefine the characteristics of devices based on them. In this paper, we propose a new approach t...
Iron oxides/oxyhydroxides, namely maghemite, iron oxide-silica composite, akaganeite, and ferrihydrite, are studied for AsV and AsIII removal from water in the pH range 2–8. All sorbents were characterized for their structural, morphological, t...
Based on the characteristics and effective components of steel slag and desulfurization gypsum, a new type of permeable reactive material was prepared by combining steel slag and desulfurization gypsum, and a simulation experiment of arsenic- and ant...
Threats due to insufficient, inadequate and costlier methods of treating contaminants such as arsenic have emphasized the significance of optimizing and managing the processes adopted. This study was aimed at the complete elimination of arsenic from...
26 October 2015
Arsenic contamination in drinking water has become an increasingly important issue due to its high toxicity to humans. The present study focuses on the development of the yttrium-based adsorbents, with basic yttrium carbonate (BYC), Ti-loaded basic y...
Arsenic (As) contamination of groundwater is commonly remediated by pump and treat. However, this technique is difficult to apply or maintain efficiently because the mobility of arsenic varies depending on the geochemical aquifer conditions. Arsenic...
Schwertmannite, a kind of iron oxyhydrosulfate mineral, can removal arsenic(III) from arsenic(III)-bearing groundwater by the adsorption process. In this study, schwertmannite was bio-synthesized by Acidithiobacillus ferrooxidans LX5 in shaking flask...
Schwertmannite (Sch) is an efficient adsorbent for arsenic(III) removal from arsenic(III)-contaminated groundwater. In this study, bio-schertmannite was synthesized in the presence of dissolved ferrous ions and Acidithiobacillus ferrooxidans LX5 in a...
A new ionic liquid modified polymer gel containing methylimidazolium groups (poly(MIA)) is proposed as a sorbent for the separation and enrichment of trace inorganic and organic arsenic species in surface waters. The poly(MIA) was synthesized by chem...
Chalcogenide vitreous semiconductors (ChVSs) find application in rewritable optical memory storage and optically switchable infrared photonic devices due to the possibility of fast and reversible phase transitions, as well as high refractive index an...
This study converted pecan shell waste into magnetic Fe3O4@biocarbon for arsenic (V) removal from aqueous medium. A preliminary test was conducted on a binary system of arsenic (V) and lead. A dual-optimization approach was applied using a fuzzy deci...
Magnetic carbon xerogel composites with Fe3O4 nanoparticles (MNPs) prepared via co-precipitation can effectively remove arsenic (As(V) and As(III)) and fluoride ions from groundwater. The optimum conditions for the synthesis of these materials were s...
This study developed iron-oxide-functionalized carbon xerogels for enhanced arsenic adsorption to mitigate global water contamination. The composites were synthesized by integrating magnetite nanoparticles (15–20 nm) into a resorcinol–for...
An experimentally validated CFD model was developed for lab-scale arsenic (As) fixed-bed columns using COMSOL Multiphysics. The effects of key factors such as the adsorbent bed depth, the feed flow rate, and the initial As concentration (conc.) on th...
The waste dump from the abandoned La Soterraña mine, a former mercury extraction site, contains high concentrations of mercury (Hg) and arsenic (As), which pose a significant environmental risk due to direct exposure to the environment. Given...
The physicochemical properties of natural bentonite and its sorbents were studied. It has been established the modification of natural bentonites using polyhydroxoxides of iron (III) (mod.1_Fe_5-c) and aluminum (III) (mod.1_Al_5-c) by the “co-p...
Ferrihydrite is usually used as a remedy for arsenic (As)-contaminated soil due to its strong affinity and large specific surface area. However, its noncrystalline phase makes it unstable in long-term applications in the soil. In this study, a soil i...
Elevated arsenic (As) contamination in water, especially groundwater, has been recognized as a major problem of catastrophic proportions. This work explores As(V) removal via the coagulation-flocculation process by use of ferric chloride coagulant an...
We used a reactive transport model to investigate the cycling of geogenic arsenic (As) in a petroleum-contaminated aquifer. We simulated As mobilization and sequestration using surface complexation reactions with Fe(OH)3 during petroleum biodegradati...
The physicochemical and adsorption properties of granular sorbents based on natural bentonite and modified sorbents based on it have been studied. It was found that modification of natural bentonite with iron (III) polyhydroxocations (mod. 1_Fe_5 GA)...
This study aimed to determine the amount of As and Pb in the water in the Meoqui-Delicias’ aquifer and their spatiotemporal dynamics. Twenty-one water sampling points were selected. Seventeen samples were from wells and four were from surface w...
Atomistic modeling of mineral–water interfaces offers a way of confirming (or refuting) experimental information about structure and reactivity. Molecular-level understanding, such as orbital-based descriptions of bonding, can be developed from charg...
In this study, iron oxide (Fe3O4) was coated with ZrO2, and doped with three rare earth elements((Y/La/Ce), and a multi-staged rare earth doped zirconia adsorbent was prepared by using uniform design U14, Response Surface methodology, and orthogonal...
28 January 2021
The W-Sn Regoufe mine, closed since the 1970s, was once intensively exploited for tungsten concentrates. Throughout its activity, considerable amounts of arsenopyrite-rich mine wastes were produced and, to this day, are still exposed to weathering co...
4 August 2022
Sequential extraction procedures (SEPs) are widely used in environmental studies to infer the chemical and/or mineralogical forms of pollutants of concern in soils and sediments. Although there is no general agreement among the scientific community,...
18 November 2010
The results of a study on the spatial distribution of arsenic in topsoil (0–5 cm) over the K. Mitrovica region, Kosovo, are reported. The investigated region (300 km2) was covered by a sampling grid of 1.4 km × 1.4 km. In total, 159 soil samples were...
Forms of gold and arsenic, as one of the main pathfinders, were researched in the podzolic, illuvial, and parent material horizons of podzol soil at the Novye Peski gold deposit. Forms of gold and arsenic were studied with the sequential extraction m...
Arsenic is a metalloid that is highly toxic to living organisms in the environment. In this study, toxicity caused by inorganic arsenate (As(V)) to terrestrial plants, such as barley Hordeum vulgare and wheat Triticum aestivum, was predicted using th...
Arsenic (As) and chromate (Cr(VI)) contamination of ground and surface waters is a major problem worldwide. Given that a new drinking water limit is anticipated for Cr(VI) and that the limit of arsenic in drinking water is quite low (10 μg/L), the...
One of the ways to recycle millions of tons of fly ash and chitin wastes produced yearly is their utilization as low-cost sorbents, mainly for heavy metal cations and organic substances. To improve their sorption efficiency, fly ashes have been therm...
17 October 2018
Florida geologic units and soils contain a wide range in concentrations of naturally-occurring arsenic. The average range of bulk rock concentrations is 1 to 13.1 mg/kg with concentrations in accessary minerals being over 1000 mg/kg. Florida soils co...
The lack of access to drinking water is a problem affecting many regions worldwide. In Santa Fe, Argentina, the population uses groundwater as a source of drinking water. Unfortunately, it has high concentrations of As(V), which makes it unsuitable f...
In this work, we developed pre-grown annealing to form β2 reconstruction sites among β or α (2 × 4) reconstruction phase to promote nucleation for high-density, size/wafer-uniform, photoluminescence (PL)-optimal InAs quantum dot...
Natural zeolites are used as adsorbents in purification processes due to their cation-exchange ability and molecular sieve properties. Surface modified natural zeolites (SMNZs), produced by attaching cationic organic surfactants to the external surfa...
The acceptance of newly implemented, safe drinking water options is not guaranteed. In the Khulna and Satkhira districts, Bangladesh, pond water is pathogen-contaminated, while groundwater from shallow tubewells may be arsenic- or saline-contaminated...
In this study, amino group surface-functionalized porous silicon adsorbent was successfully prepared for the first time using diamond wire saw silicon powder (DWSSP) as raw material through copper-assisted chemical etching (Cu-ACE) and organic functi...
The employment of granular ferric iron-(oxy)hydroxides, a well-known economic and effective method, lowers arsenic concentrations in different water types. However, for direct application in polluted groundwaters, there is a need to develop new injec...
Magnetic carbon xerogels were synthesized via direct sonication to load magnetite nanoparticles in sol–gel polycondensation onto resorcinol-formaldehyde gels. The resulting organic gels were carbonized and subjected to surface modification usin...
Copper smelting dust is a heterogeneous by-product of pyrometallurgical processing containing sulfate- and arsenic-bearing components, which accounts for its high chemical stability and environmental hazard. In this context, mechanochemical activatio...
A magnetic multi-walled carbon nanotube/zeolite nanocomposite was applied for the adsorption and removal of arsenic ions in simulated and real acid mine drainage samples. The adsorption mechanism was investigated using two-parameter (Langmuir, Freund...
Arsenic (III) is a toxic contaminant in water bodies, especially in drinking water reservoirs, and it is a great challenge to remove it from wastewater. For the successful extraction of arsenic (III), a nanocomposite material (ZnO–CuO/g–C...
Adsorption processes at mineral–water interfaces control the fate and transport of arsenic in soils and aquatic systems. Mechanistic and thermodynamic models to describe this phenomenon only consider inner-sphere complexes but recent observation of t...
Trace element arsenic is detrimental to the quality and properties of steel products. We used lanthanum to modify the distribution of arsenic by the formation of arsenic rare earth inclusions and investigated all inclusions on the full profile of the...
Effective arsenic removal is a challenge when smelting high-arsenic copper minerals (HACMs, As > 3.0 wt%). Current arsenic-removal methods for HACM smelting cannot effectively remove arsenic and do not satisfy environmental requirements. This stud...
of 11