Skip to Content

560 Results Found

  • Article
  • Open Access

PFC2D-Based Analysis of Pull-Out Response and Simulated Crack Evolution of Resin-Anchored Rock Bolts: Implications for Anchorage Design

  • Youkai Li,
  • Chengyong Chen,
  • Baoqun Wang,
  • Changjing Xu and ,
  • Ziqi Ge,
  • Lu Zhang,
  • Jiazheng Ji and
  • Chaoqun Sun
  • + 3 authors+ 0 author

17 November 2026

The design of resin-anchored rock bolt systems requires an assessment of pull-out response and potential damage under different anchorage lengths and rock-strength conditions. This study investigates the pull-out response and simulated crack evolutio...

(This article belongs to the Special Issue Intelligent Infrastructure and Construction in Civil Engineering)
  • Article
  • Open Access
14 Citations
4,929 Views
19 Pages

Mechanism of Surrounding Rock Failure and Crack Evolution Rules in Branched Pillar Recovery

  • Gaojian Hu,
  • Tianhong Yang,
  • Jingren Zhou,
  • Qinglei Yu and ,
  • Lianku Xie,
  • Honglei Liu and
  • Yong Zhao
  • + 2 authors+ 0 author

8 June 2017

To study the mechanism of surface collapse and crack evolution in a roadway chain failure process in the pillar recovery of Hongling lead zinc ore in Inner Mongolia Province, China, microseismic monitoring technology, moment tensor theory, and numeri...

  • Article
  • Open Access
5 Citations
1,158 Views
23 Pages

24 July 2025

To reveal the meso-mechanical essence of deep rock mass failure and capture precursor information, this study focuses on soft rock failure mechanisms. Based on the discontinuous medium discrete element method (DEM), we employed digital image correlat...

(This article belongs to the Special Issue Optimization of Complex Engineering Systems and Application of Advanced Digital and Intelligent Technologies)
  • Article
  • Open Access
19 Citations
3,971 Views
20 Pages

Research on Shear Behavior and Crack Evolution of Symmetrical Discontinuous Rock Joints Based on FEM-CZM

  • Xianlong Wu,
  • Gang Wang,
  • Genxiao Li,
  • Wei Han and ,
  • Shangqu Sun,
  • Shubo Zhang and
  • Wangliang Bi
  • + 2 authors+ 0 author

6 August 2020

The discontinuous joints are an essential type of natural joints. The normal force, joint persistency, and distribution exert great influences on the shear resistance of the rock joints. By simulating the uniaxial compression experiment and Brazilian...

  • Article
  • Open Access
9 Citations
2,542 Views
15 Pages

Mechanical Properties and Energy Evolution Laws of Rocks Under Freeze–Thaw

  • Xiaopeng Yue,
  • Ting Liu,
  • Tao Wen,
  • Wenjun Jia and
  • Yajuan Wu

26 January 2025

In high-altitude mountainous areas, the phenomenon of rock frost damage under repeated freeze–thaw cycles are pronounced, with the deformation and failure processes of rock often accompanied by energy dissipation. To elucidate the energy evolut...

(This article belongs to the Special Issue Approaches to Water-induced Landslide Hazard Risk Forecasting and Assessment)
  • Article
  • Open Access
9 Citations
2,254 Views
17 Pages

Critical Failure Characteristics of a Straight-Walled Arched Tunnel Constructed in Sandstone under Biaxial Loading

  • Jian Gao,
  • Xiaoshan Wang,
  • Yu Cong,
  • Qiqi Li and ,
  • Yequan Pan and
  • Xianglin Ding
  • + 1 author+ 0 author

22 April 2024

To characterize the failure of rock mass surrounding underground tunnels, biaxial compression tests were conducted on a real sandstone model with a straight-walled arched hole. The acoustic emission (AE) system and digital image correlation (DIC) opt...

(This article belongs to the Special Issue Process Safety and Monitoring of Intelligent and Green Mining Technology)
  • Article
  • Open Access
2 Citations
1,155 Views
20 Pages

Using the two-dimensional Particle Flow Code (PFC2D), a model of red sandstone containing fractures with different inclination angles under impact load was established to study the influence of fracture inclination angles on the dynamic compressive s...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
19 Citations
5,775 Views
14 Pages

1 November 2019

Microcracks in concrete can coalesce into larger cracks that further propagate under repetitive load cycles. Complex process of crack formation and growth are essentially involved in the failure mechanism of concrete. Understanding the crack formatio...

(This article belongs to the Special Issue Fracture and Fatigue Assessments of Structural Components)
  • Article
  • Open Access
11 Citations
2,388 Views
13 Pages

21 July 2023

Hydraulic fracturing as a conventional reservoir permeability enhancement technique can effectively increase the production of coalbed methane, and it is important to study the stress and crack evolution law to evaluate the effect of coalbed fracturi...

(This article belongs to the Collection Sustainable Development of Coal Based Energy: Technology, Environment, Humanities, Economy, and Education)
  • Article
  • Open Access
9 Citations
4,698 Views
14 Pages

23 November 2023

Crack propagation in ceramics is a highly quick, complex, and nonlinear process that occurs under thermal shock. It is challenging to directly observe the evolution process of cracks in experiments due to the high speed and unpredictability of crack...

  • Article
  • Open Access
1 Citations
370 Views
60 Pages

Mathematical Modeling and Simulation of Energy-Constrained Pavement Crack Maintenance Using XFEM-Based Crack Evolution and AI-Driven Repair Strategy Optimization

  • Nawal Louzi,
  • Mohammad Q. Al-Jamal,
  • Mahmoud AlJamal,
  • Ayoub Alsarhan and ,
  • Nayef H. Alshammari,
  • Khalid Hamad Alnafisah,
  • Mohammed Kamel Aleinzi and
  • Sami Aziz Alshammari
  • + 3 authors+ 0 author

1 September 2026

This study presents a mathematical modeling and simulation framework for pavement crack maintenance under limited work zone energy availability. The framework combines crack evolution, thermal repair, interface behavior, and maintenance decision-maki...

(This article belongs to the Special Issue Application of Mathematical Modeling and Simulation to Transportation)
  • Article
  • Open Access
744 Views
15 Pages

An explicit dynamic framework based on the Nonlocal Macro-Meso-scale Consistent Damage (NMMD) model is proposed to simulate complex multiple-crack evolution in quasi-brittle materials subjected to blast loading. Three numerical examples—a singl...

(This article belongs to the Section Modelling in Mechanics)
  • Article
  • Open Access
514 Views
20 Pages

17 July 2026

Borosilicate glass is widely used in microfluidic chips, optical components, and precision devices, but it is susceptible to cracking and subsurface damage during machining because of its high hardness and brittleness. Longitudinal–torsional ul...

(This article belongs to the Special Issue Advanced Precision Manufacturing of Materials)
  • Article
  • Open Access
20 Citations
4,657 Views
19 Pages

29 July 2022

The Brazilian disc test is a popular tensile strength test method for engineering materials. The fracture behavior of specimens in the Brazilian disc test is closely related to the validity of the test results. In this paper, the fracture process of...

(This article belongs to the Special Issue Computational Methods and Applications for Numerical Analysis)
  • Article
  • Open Access
453 Views
21 Pages

Effect of Steel Fiber Content on the Mesoscopic Damage Mechanism of Cemented Gangue Backfill

  • Furong Wang,
  • Xuehua Li,
  • Shenggen Cao,
  • Kaifei Wang and ,
  • Chiyuan Che,
  • Yang Liu and
  • Yi Li
  • + 2 authors+ 0 author

28 July 2026

To overcome the limitations of conventional numerical simulations of cemented gangue backfill (CGB), this study developed a refined PFC2D model that incorporates the actual particle size distributions of coal gangue and river sand. Randomly distribut...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
1 Citations
651 Views
20 Pages

Study on the Deformation and Damage Patterns of Rock–Soil Bodies with Flat-Cave-Containing Slopes Under Wet–Dry Cycling

  • Chengyu Xie,
  • Jiaozhong Chen,
  • Guanpeng Xiong,
  • Xinfeng Wang and ,
  • Jinbo Shen,
  • Ziwei Chen,
  • Baolin Yang,
  • Cun Fu and
  • Wentao Zhang
  • + 4 authors+ 0 author

17 February 2026

The stability of slopes containing flat caves, frequently employed in mining for transportation and drainage, is critically compromised by alternating dry and wet cycles, posing significant geohazard risks. This study investigates the deformation and...

(This article belongs to the Special Issue Recent Advances in Geotechnical Structures and Soil–Structure Interaction)
  • Article
  • Open Access
426 Views
22 Pages

11 June 2026

Concrete cracks are ubiquitous in practical engineering structures and continuously affect structural safety and durability. Crack images provide important visual evidence of damage evolution; however, crack images alone are insufficient to determine...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
4 Citations
1,424 Views
20 Pages

10 April 2025

The construction of an elastoplastic constitutive model for energy dissipation and crack evolution in rocks is crucial for accurately predicting their failure processes. This study first constructs a theoretical elastoplastic constitutive model by an...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
6 Citations
4,304 Views
17 Pages

8 January 2024

The characterization and understanding of crack evolution in non-uniform geological structures are crucial for predicting the mechanical response of rock-like materials or structures under varying loading conditions. In this study, an improved Peridy...

(This article belongs to the Special Issue Advances in Development and Application of New Materials for Civil Engineering)
  • Article
  • Open Access
6 Citations
1,835 Views
19 Pages

31 May 2025

To overcome the limitation of traditional elastic phase field models that neglect plastic deformation in rock compressive-shear failure, this study developed an elastoplastic phase field fracture model incorporating plastic strain energy and establis...

  • Article
  • Open Access
8 Citations
3,879 Views
23 Pages

Analysis of the Fatigue Crack Evolution of Corrugated Web Girders

  • Guoqian Wei,
  • Fan Ye,
  • Shanshan Li and
  • Siwen Chen

8 August 2019

Based on linear elastic fracture mechanics (LEFM), the fatigue crack evolution process and behavior of corrugated web girders were studied. The global finite element analysis (FEA) model of corrugated web girders was first developed and the equivalen...

  • Article
  • Open Access
1 Citations
584 Views
17 Pages

11 March 2026

Existing theories leave gaps in explaining the mechanism of concrete cracking. To explain the mechanism of concrete cracking, after considering various methods, this paper finally selects the Particle Flow Code (PFC) based on the discrete element met...

(This article belongs to the Special Issue Sustainability and Performance of Reinforced Concrete and Cement Composite)
  • Article
  • Open Access
692 Views
23 Pages

25 April 2026

In deep geothermal engineering, concrete slabs are prone to thermal cracking. The aggregates and pores are the core influencing factors for this failure behavior. However, existing research methods are unable to accurately capture the microscopic evo...

(This article belongs to the Special Issue Advanced Experimental Technology, Theory and Numerical Methods in Geomaterials and Concrete Materials)
  • Article
  • Open Access
1 Citations
1,443 Views
19 Pages

Geometric Coupling Effects of Multiple Cracks on Fracture Behavior: Insights from Discrete Element Simulations

  • Shuangping Li,
  • Bin Zhang,
  • Hang Zheng,
  • Zuqiang Liu and ,
  • Xin Zhang,
  • Linjie Guan and
  • Han Tang
  • + 2 authors+ 0 author

Understanding the multi-crack coupling fracture behavior in brittle materials is particularly critical for aging dam infrastructure, where 78% of structural failures originate from crack network coalescence. In this study, we introduce the concepts o...

  • Article
  • Open Access
1 Citations
1,180 Views
20 Pages

2 March 2026

While temperature and acidity dominate the design of zeolite catalysts for olefin cracking, the role of reaction time as an independent variable governing pathway dynamic remains elusive. This study integrates experimental and simulation methods to u...

(This article belongs to the Special Issue Exploring Acid–Catalyzed Processes: Strategies and Applications)
  • Article
  • Open Access
14 Citations
3,739 Views
21 Pages

8 August 2020

The micro-cracking morphology in laminated shale formation plays a critical role in the enhancement of shale gas production, but the impacts of bedding strength parameters on micro-cracking morphology have not been well understood in laminated shale...

(This article belongs to the Section Earth Sciences)
  • Article
  • Open Access
7 Citations
2,350 Views
21 Pages

17 October 2022

In this paper, roof-cutting technology of directional energy-cumulative presplitting blasting is taken as the research object. Through the numerical simulation software Ansys/Ls-dyna3D, the process of energy-cumulative blasting and non-cumulative bla...

(This article belongs to the Special Issue Sustainable Development and Utilization of Coal Measures Resources)
  • Article
  • Open Access
37 Citations
5,377 Views
16 Pages

Damage Evolution of RC Beams Under Simultaneous Reinforcement Corrosion and Sustained Load

  • Jiansheng Shen,
  • Xi Gao,
  • Bo Li,
  • Kun Du and ,
  • Ruoyu Jin,
  • Wei Chen and
  • Yidong Xu
  • + 2 authors+ 0 author

20 February 2019

To accurately obtain the performance of concrete structures in coastal regions, it is necessary to correctly understand the damage evolution law of reinforced concrete (RC) members under real working conditions. In this paper, four RC beams, subjecte...

  • Feature Paper
  • Review
  • Open Access
19 Citations
5,909 Views
14 Pages

28 September 2021

A perspective is presented on the evolution of damage due to environmentally assisted cracking (EAC), from crack precursor development through to long crack growth. The variable nature of crack precursors is highlighted with an observation that uncon...

(This article belongs to the Special Issue Mechanism and Predictive/Deterministic Aspects of Corrosion)
  • Article
  • Open Access
1 Citations
722 Views
12 Pages

Study on Crack Propagation and Dynamic Characteristic Evolution of Cantilevered Unstable Rock Masses Based on XFEM

  • Zhixiang Wu,
  • Guobao Zhang,
  • Mowen Xie,
  • Jiabin Zhang and ,
  • Xiaoliang Cheng,
  • Yan Du,
  • Zheng He and
  • Peng Ge
  • + 3 authors+ 0 author

28 February 2026

Cantilevered unstable rock masses constitute a prevalent geological hazard, with their stability intrinsically governed by the depth of trailing edge cracks. Traditional stability assessment methods, which largely rely on static calculations or displ...

(This article belongs to the Topic Geotechnics for Hazard Mitigation, 2nd Edition)
  • Article
  • Open Access
4 Citations
1,804 Views
13 Pages

Research on Multi-Directional Spalling Evolution Analysis Method for Angular Ball Bearing

  • Zhiming Deng,
  • Tudi Huang,
  • Xunkai Wei,
  • Hongzhong Huang and
  • Hao Wang

11 June 2024

The prediction of spalling failure evolution in the lifespan of aeroengine bearings is crucial for en-suring the safe return of aircrafts after such failures occur. This study examines the spalling failure evolution process in bearings by integrating...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
59 Views
24 Pages

Fractal Characterization of Mining-Induced Crack Evolution and Energy Release in Ultra-Thick Hard Strata

  • Jinrong Cao,
  • Jiang He,
  • Linming Dou,
  • Qiang Wang and ,
  • Xiaoliang Hu and
  • Xinyuan Tian
  • + 1 author+ 0 author

Quantifying crack evolution in ultra-thick hard strata is important for understanding mining-induced failure and energy release. Taking the 6306 working face at the Dongtan Coal Mine as a case study, physical similarity experiments and UDEC-Trigon si...

(This article belongs to the Section Engineering)
  • Article
  • Open Access
2 Citations
1,325 Views
17 Pages

23 September 2025

The ridged cutter, a highly representative non-planar PDC cutter known for its strong impact resistance and wear durability, has demonstrated significant effectiveness in enhancing the rate of penetration (ROP) in hard, highly abrasive, and interbedd...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
5 Citations
2,037 Views
20 Pages

Extension Mechanism of Water-Conducting Cracks in the Thick and Hard Overlying Strata of Coal Mining Face

  • Dong Wei,
  • Helong Gu,
  • Chungang Wang,
  • Hao Wang and ,
  • Haoyu Zhu and
  • Yuyang Guo
  • + 1 author+ 0 author

1 July 2024

It is of great significance for coal safety production and water resource protection in the Yuheng mining area to master the evolution law of water-conducting fractures under the condition of thick and hard overburden. This research focuses on the 21...

(This article belongs to the Special Issue Theory and Technology of Mine Water Disaster Prevention and Resource Utilization)
  • Article
  • Open Access
831 Views
19 Pages

11 March 2026

This study investigates the crack damage evolution in Chinese fir using an anisotropic bilinear cohesive zone-based constitutive model. The crack initiation and propagation processes were numerically modeled and simulated, and the results were valida...

(This article belongs to the Section Wood Science and Forest Products)
  • Article
  • Open Access
7 Citations
2,404 Views
17 Pages

7 July 2023

A dynamic disturbance will induce cracks around the tunnel in tunnel blasting or shield construction. To investigate the overall stability of cracks with various angles during a fixed borehole (round hole explosion) blasting, models containing an ind...

(This article belongs to the Special Issue Experimental Investigation and Numerical Modeling of Rock Brittle Failure Behavior under High Stress Conditions)
  • Article
  • Open Access
10 Citations
1,460 Views
16 Pages

24 July 2025

Loess, a typical soil widely distributed in China, exhibits engineering properties that are highly sensitive to environmental changes, leading to increased erosion and the development of surface cracks. This article examines the influence of initial...

(This article belongs to the Special Issue Research on Building Foundations and Underground Engineering)
  • Article
  • Open Access
6 Citations
2,562 Views
14 Pages

30 March 2023

The crack propagation mechanism of Cu nanowires is investigated by using molecular dynamics methods. The microstructural evolution of crack propagation at different strain rates and crack depths is analyzed. Meanwhile, the stress intensity factor at...

  • Article
  • Open Access
5 Citations
2,575 Views
12 Pages

31 July 2023

To study the effect of cyclic impacts and confining pressure on the damage evolution of rock materials, numerical simulations of cyclic impact tests on rock materials under confining pressure were carried out by LS-DYNA using dynamic relaxation and f...

(This article belongs to the Special Issue Advances in Failure Behavior of Rocks)
  • Article
  • Open Access
6 Citations
3,601 Views
20 Pages

24 March 2022

This work simulates the plowing process of a single asperity GaAs by diamond indenter using molecular dynamics simulations. The deformation mechanism of asperity GaAs is revealed by examining the topography evolution and stress state during the plowi...

  • Article
  • Open Access
4 Citations
2,032 Views
24 Pages

Dynamic Characteristics of Gear System Under Compound Fault of Tooth Root Crack and Bearing Outer Ring

  • Yu Bai,
  • Hong Jiang,
  • Xiangfeng Zhang,
  • Zhen Lei and ,
  • Wenhan Huang,
  • Zhijie Zhu and
  • Chaochao Cui
  • + 2 authors+ 0 author

12 December 2024

Research on single faults like tooth root cracks and bearing outer ring failures is well-established. However, existing studies often replace the actual crack propagation path with a simplified linear crack model, neglecting the variation in stress i...

(This article belongs to the Section Machine Design and Theory)
  • Article
  • Open Access
5 Citations
2,327 Views
15 Pages

3 January 2024

Using the self-developed “TCHFSM-I” large-size true triaxial fracturing seepage simulation device and fluid injection flow dynamic monitoring device, we studied the crack initiation and expansion law of multi-fractures under different per...

(This article belongs to the Topic Advanced Engines Technologies)
  • Article
  • Open Access
3 Citations
1,813 Views
21 Pages

1 September 2025

Tunnel linings play a vital role in underground infrastructure, yet their performance can be severely affected by pre-existing cracks. This study investigates the mechanical behavior and failure mechanisms of C30 concrete with artificial cracks under...

  • Article
  • Open Access
1 Citations
664 Views
27 Pages

22 April 2026

This study conducts multi-scale numerical simulations spanning atomic to macroscopic scales (i.e., from nanometer to millimeter scale) to investigate the fatigue crack propagation behavior in the welded heat-affected zone (HAZ) of AH36 shipbuilding s...

(This article belongs to the Section Mechanics of Materials)
  • Article
  • Open Access
3 Citations
1,707 Views
28 Pages

1 March 2025

Compared with single coal seam mining, the stratum damage induced by shallow multi-seam mining is more severe and poses a risk of mine disasters that threaten the safety of coal mine personnel. In order to reveal the characteristics and mechanism of...

  • Article
  • Open Access
649 Views
20 Pages

11 May 2026

Metal magnetic memory (MMM) is a promising non-destructive evaluation method for ferromagnetic materials, allowing early detection of stress concentration and micro-defects under weak geomagnetic excitation. However, current magneto-mechanical coupli...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
3 Citations
1,677 Views
17 Pages

6 December 2024

In this paper, uniaxial compression tests and numerical simulation were conducted on specimens of five sizes, and the influence of specimen size on the failure characteristics and mechanics of specimens was studied. The results show that when the bot...

(This article belongs to the Special Issue Low-Carbon Building Materials)
  • Article
  • Open Access
9 Citations
3,779 Views
26 Pages

28 May 2023

The integrity and stability of salt caverns for natural gas storage are subjected to a gas cycling loading operation. The coupled effect of confining pressure and temperature on the response of the salt cavity surrounding the wall is essential to sta...

(This article belongs to the Special Issue Advances in Rock Mechanics and Geotechnical Engineering)
  • Article
  • Open Access
1 Citations
1,022 Views
27 Pages

Current studies on fatigue crack initiation in pipelines remain relatively limited. Existing frameworks are confronted with issues including difficulties in crack monitoring and limited consideration of intragranular short-crack propagation. To addre...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
4 Citations
2,524 Views
20 Pages

Simulation Study on Crack Initiation and Energy Mechanisms of Rock-like Samples with Non-Parallel Overlapping Flaws under Uniaxial Compression

  • Peng Wu,
  • Yanlong Chen,
  • Qiang Li,
  • Xianbiao Mao and ,
  • Lianying Zhang,
  • Ming Li,
  • Liang Chen and
  • Zhong Zhao
  • + 3 authors+ 0 author

14 October 2022

Non-parallel overlapping flaws widely exist in engineering rock mass. Understanding their crack initiation and energy evolution characteristics is of great significance to ensure the stability of rock engineering. Based on the existing experiments, t...

of 12