In this study, we employ strong field approximation (SFA) to investigate the influence of the number of pulse cycles on above-threshold ionization within the framework of nondipole theory. The SFA enables the analysis of the ionization process under...
Intentional high-power electromagnetic (EM) interference poses a serious threat to sensitive electronic systems and often manifests as ultra-wideband (UWB) sub- and nanosecond pulses. Metallic shielding enclosures with technological apertures are com...
To address the technical challenges of system-generated electromagnetic pulse (SGEMP) measurement, the generation environment of SGEMP is introduced, and the characteristics of the magnetic field waveform to be measured are analyzed first in this pap...
A laser altimeter using code modulation techniques receives a backscattered pulse wider than the transmitted rectangular pulse when scanning a rough or sloped target surface. This leads to degrading the ranging performance in terms of signal-to-noise...
This study was based on a target spectrum (GB183062015) and synthesized different characteristic periods, pulse ground motions, and non-pulse ground motions utilizing EQsignal v1.2.1 software. It also investigated the dynamic behaviors of bridge pier...
This study aims to explore the seismic performance of large-span concrete-filled steel tubular (CFST) arch bridges under near-fault pulse-like ground motions (PLGMs). Firstly, a deck-type CFST arch bridge located in a high-intensity seismic zone is s...
A continuous point of a trajectory for an ordinary differential equation can be viewed as a special impulsive point; i.e., the pulsed proportional change rate and the instantaneous increment for the prey and predator populations can be taken as 0. By...
Various adverse events and complications have been attributed to COVID-19 (coronavirus disease 2019) vaccinations, which can affect the cardiovascular system, with conditions such as myocarditis, thrombosis, and ischemia. The aim of this study was to...
The surface treatment of concrete enhances the bonding of its metal coatings. Therefore, in the present study, on the concrete surface, prior to the deposit of an 85Zn-15Al coating via an arc thermal spraying process, different surface treatments wer...
The saturation effect during the excitation of a two-level system by laser pulses is investigated in the framework of two approaches: excitation probability based on Karplus–Schwinger spectral profile and exact solution of Bloch equations. Simp...
Pulsed electrolysis endowed merits of high current density, low energy consumption, and simple operation; thus, a booming in their publication numbers has been witnessed in recent years. In this review, we aim to summarize the state-of-the-art pulsed...
The effects of electrical pulse width and output irradiance on the inactivation effect of intense pulse light (IPL) are studied in this paper. The measured radiant efficiency of pulsed xenon lamp can be more than 50%, and its irradiance can reach lev...
Combined pulse laser systems combining continuous-wave (CW) lasers and nanosecond pulsed lasers have shown clear advantages in metal ablation and surface modification. However, the plasma shielding effect induced by nanosecond pulses and the associat...
In this work, pulse laser detectors based on the transverse thermoelectric effect of YBa2Cu3O7-δ thin films on vicinal cut LaAlO3 (001) substrates have been fabricated. The anisotropic Seebeck coefficients between ab-plane (Sab) and c-axis (Sc)...
The pulsed laser has gradually become the standard method of studying the single-event effects of micro-nano devices, and it is a powerful supplement to heavy ion experiments on single-event effects. In particular, with the continuous improvement of...
In this paper, a non-Fourier heat conduction model of ultra-short pulsed laser ablation of metal is established that takes into account the effect of the heat source, laser heating of the target, the evaporation and phase explosion of target material...
Decades of research and applications have demonstrated that low-intensity pulsed ultrasound (LIPUS) has a certain therapeutic effect on diseases involving bone remodeling. LIPUS operates in a pulsed-wave mode at low intensity, ensuring efficient tran...
Referring to the sensorless control of interior permanent magnet synchronous motor (IPMSM), the initial rotor polarity is normally estimated based on the motor saturation effect. However, for certain special IPMSMs, the saturation effect is weak even...
In today’s world, protection against electromagnetic waves, including high-power microwave (HPM) pulses, is becoming increasingly important. Hence, the aim of this research was to select an absorbing admixture, which, when used in an appropriat...
In radar entomology, one primary challenge is detecting small species (smaller than 5 cm) since these tiny insects reflect radiation that can be poorly observable and, therefore, difficult to interpret. After a literature search on radar entomology,...
Ion beam sputtering is widely utilized in the area of ultra-high precision fabrication, coating, and discovering the microworld. A pulsed ion beam (PIB) can achieve higher material removal resolution while maintaining traditional ion beam removal per...
Aiming at the evaluation of the shielding effectiveness (SE) of materials against high-intensity electromagnetic pulse (EMP), the shielding mechanism in the frequency domain is investigated, and the factors that determine SE such as conductivity, thi...
Single-event effects (SEEs) in integrated circuits and devices can be studied by utilizing ultra-fast pulsed laser system through Two Photon Absorption process. This paper presents technical ways to characterize key factors for laser based SEEs mappi...
Electrical stimulation technology has advanced from cardiac pacemakers towards cochlear implants, physical rehabilitation, and treatment for Parkinson’s and other diseases. Electrical stimulation parameters, such as waveform, amplitude, and sti...
Despite the use of therapeutic ultrasound in the treatment of soft tissue pathologies, there remains some controversy regarding its efficacy. In order to develop new treatment protocols, it is a common practice to carry out in vitro studies in cell c...
Microscale laser dynamic forming, as a novel high-speed microforming technique, can overcome the shortcomings of traditional microforming methods. However, in practical applications, laser dynamic microforming technology is often affected by the rebo...
This study aims to examine the seismic response of self-centering single-degree-of-freedom (SDOF) systems exhibiting flag-shaped hysteretic behavior, while considering soil–structure interaction, in contrast to prior research that predominantly...
Propagation effects on the narrow bipolar pulses (NBPs) or the radiation fields generated by compact cloud discharges as they propagate over finitely conducting ground are presented. The results were obtained using a sample of NBPs recorded with high...
In order to expand the application range of laser welding and improve weld quality, an extra pulse current was used to aid laser-welded 2219 aluminum alloy, and the effects of pulse current parameters on the weld microstructure and mechanical propert...
Chronic Prostatitis/Chronic Pelvic Pain Syndrome (CP/CPPS) is one of the most common urologic diseases, and no curative treatments have been identified. Low-intensity pulsed ultrasound (LIPUS) has been successfully used in promoting tissue healing, i...
Current research trends in significant hydraulic engineering projects focus on investigating the seismological properties of intensity and frequency content of pulse-type near-field earthquakes on the structural response. Conversely, the duration imp...
An electromagnetic pulse (EMP) explodes in real-time and causes critical damage within a short period to not only electric devices, but also to national infrastructures. In terms of EMP shielding rooms, metal plate has been used due to its excellent...
The artificial olfactory image was proposed by Lundström et al. in 1991 as a new strategy for an electronic nose system which generated a two-dimensional mapping to be interpreted as a fingerprint of the detected gas species. The potential distr...
Cellular response upon nsPEF exposure depends on different parameters, such as pulse number and duration, the intensity of the electric field, pulse repetition rate (PRR), pulsing buffer composition, absorbed energy, and local temperature increase. T...
Pulsed electric fields (PEFs) are widely recognized as a non-thermal, selective physical therapy with wide clinical application in tumor ablation. The pulse width determines how electrical energy is distributed across plasma membrane to intracellular...
Tungsten (W) is considered a promising plasma-facing material for protecting the divertor of the ITER (International Thermonuclear Experimental Reactor). The effects on W of transient thermal loads of high energy occurring in a tokamak under operativ...
This study investigated the shielding effectiveness (SE) of glass materials with conductive coatings by establishing a 3000 × 3000 × 3000 mm electromagnetic pulse (EMP)—shielded room according to the EMP shielding requirements in th...
Previous studies have reported the effect of transcranial pulsed current stimulation (tPCS) on eliminating cognitive fatigue, but there is little research on optimizing the intervention program of tPCS. The purpose of this study was to explore the ef...
Pulsed radiofrequency (PRF) current applied to peripheral nerves is a modality used in interventional pain medicine, but its underlying mechanisms remain unclear. This study aimed to investigate whether ex vivo exposure of human monocytic THP-1 cells...
The aim was to study the complementary effect between cereals and pulses on protein quality. The values for the digestible indispensable amino acid score (DIAAS) in cooked cereals and pulses, given alone, and blends of cooked cereals and pulses, were...
In recent years, Atomic Force Microscope (AFM)-based nanolithography techniques have emerged as a very powerful approach for the machining of countless types of nanostructures. However, the conventional AFM-based nanolithography methods suffer from l...
Pulses, as an important part of the human diet, can act as a source of high-quality plant proteins. Pulse proteins and their hydrolysates have shown promising results in alleviating metabolic syndrome and modulating the gut microbiome. Their bioactiv...
Femtosecond laser processing combines highly accurate structuring with low residual heating of materials, low thermal damage, and nonlinear absorption processes, making it suitable for the machining of transparent brittle materials. However, with hig...
We analyzed the formation of the aluminum (Al) nanoparticles (NPs) with triangular shape obtained by ablating Al bulk in liquid using pulses with different durations (5 ns, 200 ps, and 30 fs) and wavelengths (355 nm, 800 nm, and 1064 nm). We report t...
High-intensity nanosecond pulse electric fields (nsPEF) can preferentially induce various effects, most notably regulated cell death and tumor elimination. These effects have almost exclusively been shown to be associated with nsPEF waveforms defined...
Background and Aims: Running can induce advantageous cardiovascular effects such as improved arterial stiffness and blood-supply perfusion. However, the differences between the vascular and blood-flow perfusion conditions under different levels of en...
The quality of micro-features in various technologies is mostly affected by the choice of the micro-fabrication technique, which in turn results in several limitations with regard to materials, productivity, and cost. Laser beam micro-machining has a...
Airborne laser scanning (ALS) is increasingly being used to enhance the accuracy of biomass estimates in tropical forests. Although the technological development of ALS instruments has resulted in ever-greater pulse densities, studies in boreal and...
The dietary fiber gap that is present in many countries co-exists with a low intake of grain legumes (pulses) that have 2–3 times more dietary fiber than cereal grains that are commonly recommended to increase fiber intake. Given the relationships am...
Objectives: This study aimed to examine the effects of endurance and high-intensity resistance training on arterial stiffness and ventricular repolarization in elite athletes. Methods: A total of 50 male athletes from different sports disciplines (vo...
of 153