- Article
It is becoming quite evident that, when it comes to the further scaling of advanced node transistors, increasing the flash memory storage capacity, and enabling the on-chip integration of multiple functionalities, “there’s plenty of room...
It is becoming quite evident that, when it comes to the further scaling of advanced node transistors, increasing the flash memory storage capacity, and enabling the on-chip integration of multiple functionalities, “there’s plenty of room...
This study proposes a novel framework integrating long short-term memory (LSTM) networks with Bayesian optimization (BO) to address process–device co-optimization challenges in trench-gate metal–oxide–semiconductor field-effect tran...
Neural network (NN)-based compact modeling methodologies are gaining attention due to the challenges of device complexity, narrow model coverage, and SPICE simulation speed in advanced semiconductor technology nodes. As device complexity increases, t...
In order to resolve the issue of tremendous energy consumption in conventional artificial intelligence, hardware-based neuromorphic system is being actively studied. Although various synaptic devices for the system have been proposed, they have shown...
Process-induced variability is a growing concern in the design of analog circuits, and in particular for monolithic microwave integrated circuits (MMICs) targeting the 5G and 6G communication systems. The RF and microwave (MW) technologies developed...
This work presents a comprehensive study of GaN-on-Si pseudo-vertical MOSFETs focusing on single-trench and multi-trench designs. Thanks to a gate-first process flow based on an Al2O3/TiN MOS stack, both fabricated devices exhibit promising transisto...
The rapid advancement of artificial intelligence (AI) necessitates high-performance computing architecture. While compute express link (CXL) technologies facilitate memory expansion, conventional dynamic random-access memory (DRAM) encounters fundame...
Process Induced Variability (PIV) stemming from fabrication tolerance can impact the performance of integrated circuits. This issue is particularly significant at high frequencies, since Monolithic Microwave Integrated Circuits (MMICs) rely on advanc...
Thanks to high-current densities and cutoff frequencies, short-channel length AlGaN/GaN HEMTs are a promising technology solution for implementing RF power amplifiers in 5G front-end modules. These devices, however, might suffer from current collapse...
Plasma etching is a critical step in semiconductor manufacturing, yet existing approaches are either computationally expensive or limited to predicting scalar etching metrics rather than full profile evolution. We propose EPreNet, a condition-guided...
A high-nitrogen compound, 2,2′-azobis(1H-imidazole-4,5-dicarbonitrile) (TCAD), was synthesized from commercially available 2-amino-1H-imidazole-4,5-dicarbonitrile. It was characterized with infrared and nuclear magnetic resonance spectroscopy....
This paper addresses the complex behavior of Single-Electron Bipolar Avalanche Transistors (SEBATs) through a comprehensive modeling approach. TCAD simulations were used to analyze the behavior of the device during avalanche pulses triggered by elect...
In this study, we investigate the initial rapid recrystallization of a discretely amorphized C3H5-molecular-ion-implanted silicon (Si) substrate surface in the subsequent thermal annealing treatment through the analysis of plan-view transmission elec...
This work presents a novel and fully virtual flow for extracting the SPICE model of a power MOSFET, starting exclusively from TCAD simulations. Unlike traditional approaches that rely on experimental silicon data, our methodology enables designers to...
Device simulation plays a crucial role in complementing experimental device characterisation by enabling deeper understanding of internal physical processes. However, for simulations to be trusted, experimental validation is essential to confirm the...
The problem that the conventional double-exponential transient current model (DE model) can overdrive the circuit, which leads to the overestimation of the soft error rate of the logic cell, is solved. Our work uses a new and accurate model for predi...
From the perspectives of characterized data, calibrated TCAD simulations and compact modeling, we present a deeper investigation of the very high frequency behavior of state-of-the-art sub-THz silicon germanium heterojunction bipolar transistors (SiG...
This work investigates p+n−n GaN-on-Si vertical structures, through dedicated measurements and TCAD simulations, with the ultimate goal of identifying possible strategies for leakage and breakdown optimization. First, the dominant leakage processes w...
Breakdown voltage (BV), on-state voltage (Von), static latch-up voltage (Vlu), static latch-up current density (Jlu), and threshold voltage (Vth), etc., are critical static characteristic parameters of an IGBT for researchers. Von and Vth can charact...
THz detectors based on CMOS technology have garnered widespread attention due to their potential in building compact, low-power, and scalable THz sensing and imaging systems. This paper proposes a 3.2 THz plasmonic wave detector fabricated in a stand...
In this paper, a single-event transient model based on the effective space charge for MOSFETs is proposed. The physical process of deposited and moving charges is analyzed in detail. The influence of deposited charges on the electric field in the dep...
The theoretical basis of a hypothetical spherical electrode detector was investigated in our previous work. It was found that the proposed detector has very good electrical characteristics, such as greatly reduced full depletion voltage, small capaci...
This work reports the design, modelling, and simulation of a novel polymer MEMS gas sensor platform called a ring–flexure–membrane (RFM) suspended gate field effect transistor (SGFET). The sensor consists of a suspended polymer (SU-8) MEM...
Amorphous gallium oxide thin-film transistor photodetectors are promising for ultraviolet detection because of their wide bandgap and low dark current. Magnetron sputtering is compatible with low-temperature processing, but device performance is sens...
The modeling and fabrication of a magnetic microsensor based on a magneto-transistor were presented. The magnetic sensor is fabricated by the commercial 0.18 mm complementary metal oxide semiconductor (CMOS) process without any post-process. The fi...
In this paper, we investigated the cell-to-cell interference in scaled-down 3D NAND flash memory by using a Technology Computer-Aided Design (TCAD) simulation. The fundamental cause of cell-to-cell interference is that the electric field crowding poi...
The operation dynamics of the capacitor-type and PIN diode type detectors based on GaN have been simulated using the dynamic and drift-diffusion models. The drift-diffusion current simulations have been implemented by employing the software package S...
This work aims at inspecting the device operation and performance of a novel flipped npn microstructure solar cell based on low-cost heavily doped silicon wafers. The flipped structure was designed to eliminate the shadowing effect as applied in the...
This study develops a three-axis magnetic field (MF) microsensor manufactured by a complementary metal oxide semiconductor (CMOS) process. The MF microsensor contains a ring emitter, four bases, and eight collectors. Sentaurus TCAD was used to simula...
Three-dimensional NAND flash memory is widely used in sensor systems as an advanced storage medium that ensures system stability through fast data access. However, in flash memory, as the number of cell bits increases and the process pitch keeps scal...
Single-event effects (SEEs) present a significant challenge to the radiation reliability of integrated circuits. Conventional SEE analysis methods for single-photon avalanche diode (SPAD) devices primarily rely on Sentaurus Technology Computer-Aided...
In this work, the electrostatic discharge (ESD) characteristics of a pMOS-triggered bidirectional silicon-controlled rectifier (PTBSCR) that was fabricated in a 0.18 μm silicon-on-insulator (SOI) bipolar-CMOS-DMOS (BCD) process, is investigated. T...
An extraction method of the interface-trap densities (Dit) of the stacked bonding structure in 3D integration using high-frequency capacitance–voltage technique is proposed. First, an accurate high-frequency capacitance–voltage model is d...
The benefit of the super-junction (SJ) technique at the low-voltage (30 V) range is investigated in this work. Optimizations such as adding a buffer layer to the device have been used, but simulation and theoretical evidences show that the benefits o...
In this paper, the design and simulation of a monolithically integrated silicon carbide (SiC) MEMS piezoresistive accelerometer with an on-chip SiC field-effect transistor (SiC-FET) readout circuit are presented for applications in harsh environments...
For single-event radiation damage of power MOSFET devices, this paper aims to establish a statistical analysis method based on external observation (gate/drain current characteristics in irradiation environment) to recognize and evaluate the radiatio...
In this paper we investigate the performance of an integrated n-type laterally-diffused metal oxide semiconductor (nLDMOS) transistor, using 2D TCAD simulations. This work is based on the 1 µm CMOS technology node at CDTAs clean room. The nLDMO...
Due to continuous CMOS technology downscaling, Integrated Circuits (ICs) have become more susceptible to radiation-induced hazards such as soft errors. Thus, to design radiation-hardened and reliable ICs, the Soft Error Rate (SER) estimation constitu...
The role of the magnesium (Mg) doping and its electrical activation on the off-state of p-GaN/AlGaN/GaN HEMTs has been investigated in this work. Firstly, the effect of different Mg doping profiles has been studied via the help of Technology Computer...
A novel super-junction (SJ) double-trench metal oxide semiconductor field effect transistor (DT-MOS) is proposed and studied using Synopsys Sentaurus TCAD in this article. The simulation results show that the proposed MOSFET has good static performan...
Metal–oxide–semiconductor field-effect transistors (MOSFETs) have proven to be effective devices for rectifying electromagnetic radiation at extremely high frequencies, approximately 1 THz. This paper presents a new interpretation of the...
This paper presents an experimental study on the high-dose-rate transient ionizing radiation response and influencing factors of a Nano-Scale Fully Depleted Silicon-On-Insulator (FDSOI) D flip-flops (DFFs) circuit. Results indicate that data errors o...
In this study, we proposed a rectifying drain electrode that was embedded in a p-GaN gate AlGaN/GaN heterojunction field-effect transistor to achieve the unidirectional switching characteristics, without the need for a separate reverse blocking devic...
In this study, the impact of the negative capacitance (NC) effect on process-induced variations, such as work function variation (WFV), random dopant fluctuation (RDF), and line edge roughness (LER), was investigated and compared to those of the base...
Micro-LEDs have found widespread applications in modular large-screen TVs, automotive displays, and high-resolution-density augmented reality glasses. However, these micron-sized LEDs experience a significant efficiency reduction due to the defects o...
In the present study, a novel normally-off vertical GaN MOSFET with an enhanced AlGaN/GaN channel on the sidewall has been proposed using the technology computer-aided design (TCAD) simulation. By using the selective area growth process, the trench s...
This study investigates the impact of non-ideal wordline sidewall angles caused by photoresist profile variation during the wordline etching process in DRAMs employing a buried-channel array transistor (BCAT) structure. Using Technology Computer-Aide...
The effect of the source/drain compressive stress on the mechanical stability of stacked Si nanosheets (NS) during the process of channel release has been investigated. The stress of the nanosheets in the stacking direction increased first and then d...
In an era of rapid technological advancements and growing necessity for effective power management systems, the significance of silicon Metal–Oxide–Semiconductor Field-Effect Transistors (MOSFETs) in contemporary power electronics is more...
The design, fabrication, and measurement of a microelectromechanical system (MEMS) three-axis magnetic field sensor (MFS) based on the commercial complementary metal oxide semiconductor (CMOS) process are investigated. The MFS is a magnetic transisto...
of 3