Skip to Content

52 Results Found

  • Article
  • Open Access
19 Citations
3,942 Views
20 Pages

The Transferability and Design of Commercial Printer Settings in PLA/PBAT Fused Filament Fabrication

  • Sisi Wang,
  • Dagmar R. D’hooge,
  • Lode Daelemans,
  • Hesheng Xia and ,
  • Karen De Clerck and
  • Ludwig Cardon
  • + 1 author+ 0 author

2 November 2020

In many fused filament fabrication (FFF) processes, commercial printers are used, but rarely are printer settings transferred from one commercial printer to the other to give similar final tensile part performance. Here, we report such translation go...

(This article belongs to the Special Issue Functional Polymers in Additive Manufacturing)
  • Article
  • Open Access
14 Citations
6,102 Views
21 Pages

Fused-Deposition Modeling (FDM) is a commonly used 3D printing method for rapid prototyping and the fabrication of plastic components. The history of temperature variation during the FDM process plays a crucial role in the degree of bonding between l...

(This article belongs to the Special Issue 10th Anniversary of Computation—Computational Engineering)
  • Article
  • Open Access
29 Citations
6,593 Views
13 Pages

Objective: A digital workflow opens up new possibilities for the indirect bonding (IDB) of brackets. We tested if the printing orientation for bracket transfer models on the build platform of a 3D printer influences the accuracy of the following IDB...

(This article belongs to the Collection Digital Dentistry: Advances and Challenges)
  • Article
  • Open Access
39 Citations
4,471 Views
18 Pages

Experimental Modal Analysis and Characterization of Additively Manufactured Polymers

  • Hieu Tri Nguyen,
  • Kelly Crittenden,
  • Leland Weiss and
  • Hamzeh Bardaweel

19 May 2022

Modern 3D printed components are finding applications in dynamic structures. These structures are often subject to dynamic loadings. To date, research has mostly focused on investigating the mechanical properties of these 3D printed structures with m...

(This article belongs to the Special Issue Applications of 3D Printing for Polymers)
  • Communication
  • Open Access
17 Citations
3,960 Views
10 Pages

27 September 2020

We describe a concept study in which the changes of concentration of benzene, toluene, ethylbenzene, and xylene (BTEX) compounds and styrene within a 3D printer enclosure during printing with different acrylonitrile butadiene styrene (ABS) filaments...

(This article belongs to the Special Issue Electronic Noses and Tongues for Environmental Monitoring)
  • Article
  • Open Access
6 Citations
5,027 Views
10 Pages

Telemedicine is defined as the delivery of healthcare services at a distance using electronic means. The incorporation of 3D printing in the telemedicine cycle could result in pharmacists designing and manufacturing personalised medicines based on th...

(This article belongs to the Special Issue Digital Transformation in Healthcare)
  • Article
  • Open Access
1 Citations
5,795 Views
16 Pages

Design of a Sensor System for On-Line Monitoring of Contact Pressure in Chalcographic Printing

  • José Antonio Jiménez,
  • Francisco Javier Meca,
  • Enrique Santiso and
  • Pedro Martín

5 September 2017

Chalcographic printer is the name given to a specific type of press which is used to transfer the printing of a metal-based engraved plate onto paper. The printing system consists of two rollers for pressing and carrying a metal plate onto which an e...

(This article belongs to the Section Physical Sensors)
  • Feature Paper
  • Article
  • Open Access
24 Citations
5,553 Views
14 Pages

In the near future, when designing and using Double Wall Airfoils, which will be manufactured by 3D printers, the positional relationship between the impingement cooling nozzle and the heat transfer enhancement ribs on the target plate naturally beco...

  • Article
  • Open Access
5 Citations
3,828 Views
18 Pages

Reconstruction of Microscopic Thermal Fields from Oversampled Infrared Images in Laser-Based Powder Bed Fusion

  • Leigh Stanger,
  • Thomas Rockett,
  • Alistair Lyle,
  • Matthew Davies and ,
  • Magnus Anderson,
  • Iain Todd,
  • Hector Basoalto and
  • Jon R. Willmott
  • + 3 authors+ 0 author

16 July 2021

This article elucidates the need to consider the inherent spatial transfer function (blur), of any thermographic instrument used to measure thermal fields. Infrared thermographic data were acquired from a modified, commercial, laser-based powder bed...

(This article belongs to the Special Issue Thermal Imaging Sensors and Their Applications)
  • Article
  • Open Access
37 Citations
4,511 Views
20 Pages

Study of Microchannels Fabricated Using Desktop Fused Deposition Modeling Systems

  • Muhammad Asif Ali Rehmani,
  • Swapna A. Jaywant and
  • Khalid Mahmood Arif

25 December 2020

Microfluidic devices are used to transfer small quantities of liquid through micro-scale channels. Conventionally, these devices are fabricated using techniques such as soft-lithography, paper microfluidics, micromachining, injection moulding, etc. T...

  • Feature Paper
  • Article
  • Open Access
12 Citations
5,530 Views
17 Pages

Spectral Data Analysis for Forgery Detection in Official Documents: A Network-Based Approach

  • Mohammed Abdulbasit Ali Al-Ameri,
  • Bunyamin Ciylan and
  • Basim Mahmood

5 December 2022

Despite the huge advances in digital communications in the last decade, physical documents are still the most common media for information transfer, especially in the official context. However, the readily available document processing devices and te...

(This article belongs to the Section Computer Science & Engineering)
  • Article
  • Open Access
66 Citations
10,237 Views
21 Pages

The Influence of Selective Laser Melting (SLM) Process Parameters on In-Vitro Cell Response

  • Bartłomiej Wysocki,
  • Joanna Idaszek,
  • Joanna Zdunek,
  • Krzysztof Rożniatowski and ,
  • Marcin Pisarek,
  • Akiko Yamamoto and
  • Wojciech Święszkowski
  • + 2 authors+ 0 author

The use of laser 3D printers is very perspective in the fabrication of solid and porous implants made of various polymers, metals, and its alloys. The Selective Laser Melting (SLM) process, in which consolidated powders are fully melted on each layer...

(This article belongs to the Special Issue Current Trends in Metallic Biomaterials: From Additive Manufacturing to Bio-functilozation, Infection-Prevention, and Beyond)
  • Review
  • Open Access
177 Views
29 Pages

12 November 2026

Static computer-assisted implant surgery (sCAIS) relies on a chain of digital, manufacturing, and clinical steps to transfer the virtually planned implant position to the patient. Although static surgical guides improve implant placement accuracy com...

  • Article
  • Open Access
65 Views
14 Pages

Evaluation of Microchannels for Particle Measurement Fabricated with a Consumer 3D Printer

  • Yukichi Horiguchi,
  • Masato Yasuura,
  • Hiroki Ashiba and
  • Ken-ichi Nomura

17 November 2026

Resistive pulse sensing (RPS), also known as Coulter counting, is a valuable technology for individually counting and measuring particles. However, practical implementation of microfluidic RPS requires appropriate sensing-region geometry and reproduc...

(This article belongs to the Special Issue Applications of Manufacturing and Measurement Sensors: 2nd Edition)
  • Perspective
  • Open Access
5 Citations
4,487 Views
17 Pages

Build, Share and Remix: 3D Printing for Speeding Up the Innovation Cycles in Ambient Ionisation Mass Spectrometry (AIMS)

  • Nancy Shyrley García-Rojas,
  • Héctor Guillén-Alonso,
  • Sandra Martínez-Jarquín,
  • Abigail Moreno-Pedraza and ,
  • Leonardo D. Soto-Rodríguez and
  • Robert Winkler
  • + 1 author+ 0 author

17 February 2022

Ambient ionisation mass spectrometry (AIMS) enables studying biological systems in their native state and direct high-throughput analyses. The ionisation occurs in the physical conditions of the surrounding environment. Simple spray or plasma-based A...

(This article belongs to the Special Issue Advances in Ambient Ionization Techniques for Mass Spectrometry)
  • Article
  • Open Access
4 Citations
3,314 Views
19 Pages

Mathematical Model for Estimating the Sound Absorption Coefficient in Grid Network Structures

  • Takamasa Satoh,
  • Shuichi Sakamoto,
  • Takunari Isobe,
  • Kenta Iizuka and
  • Kastsuhiko Tasaki

28 January 2023

Although grid network structures are often not necessarily intended to absorb sound, the gaps between the rods that make up the grid network are expected to have a sound absorption effect. In this study, the one-dimensional transfer matrix method was...

(This article belongs to the Special Issue Advanced Materials Structures for Sound and Vibration Damping)
  • Article
  • Open Access
18 Citations
6,712 Views
17 Pages

2 September 2021

Accurate bracket placement is essential for successful orthodontic treatment. An indirect bracket bonding system (IDBS) has been developed to ensure proper bracket positioning with three-dimensional computer-aided transfer jigs. The purpose of this s...

(This article belongs to the Special Issue New Frontier in Advanced Dentistry: CBCT, Intraoral Scanner, Sensors, and Artificial Intelligence in Dentistry)
  • Article
  • Open Access
140 Views
33 Pages

1 November 2026

Thin stochastic porous structures have potential applications as flexible structural components and functional elements in heat and mass transfer systems, filtration and separation membranes, tissue engineering scaffolds, and lightweight structures r...

(This article belongs to the Special Issue 3D Printing Polymers: Design and Applications)
  • Article
  • Open Access
1 Citations
2,965 Views
11 Pages

31 October 2024

Objective: To assess the accuracy of three-dimensional (3D) printed one-piece vs. multiple segmented transfer trays for indirect bonding techniques in moderate and severe crowding cases. Methods: Eighty digital maxillary dental models were produced b...

(This article belongs to the Special Issue Orthodontics and New Technologies: 2nd Edition)
  • Article
  • Open Access
244 Views
27 Pages

20 October 2026

Owing to the dispersed and data-driven nature of additive manufacturing (AM), various new cybersecurity-related threats have emerged regarding digital file transfer, data trustworthiness, intellectual property (IP) protection, and traceability. The i...

(This article belongs to the Special Issue Autonomous Systems in Cyber-Physical Systems and Smart Industry: Innovations and Challenges, 3rd Edition)
  • Article
  • Open Access
8 Citations
4,193 Views
14 Pages

7 March 2024

New rapid, reliable, and cost-effective alternative systems are needed for the rapid diagnosis of Streptococcus pyogenes. The aim of this study was to fabricate a microfluidic test device to detect Streptococcus pyogenes by combining the Loop-mediate...

(This article belongs to the Section B: Biology and Biomedicine)
  • Article
  • Open Access
4 Citations
3,368 Views
21 Pages

An obstacle for many microfluidic developments is the fabrication of its structures, which is often complex, time-consuming, and expensive. Additive manufacturing can help to reduce these barriers. This study investigated whether the results of a mic...

(This article belongs to the Special Issue Acute Leukemia: From Basic Research to Clinical Application)
  • Feature Paper
  • Article
  • Open Access
24 Citations
8,535 Views
14 Pages

22 August 2018

This work describes the use of a benchtop razor printer to fabricate epidermal paper-based electronic devices (EPEDs). This fabrication technique is simple, low-cost, and compatible with scalable manufacturing processes. EPEDs are fabricated using pa...

(This article belongs to the Special Issue Flexible Electronics: Fabrication and Ubiquitous Integration)
  • Article
  • Open Access
7 Citations
3,919 Views
12 Pages

3D-Printed Hydrodynamic Focusing Lab-on-a-Chip Device for Impedance Flow Particle Analysis

  • Dayananda Desagani,
  • Shani Kleiman,
  • Teddy Zagardan and
  • Hadar Ben-Yoav

Particles analysis, such as cell counting and differentiation, are widely used for the diagnosis and monitoring of several medical conditions, such as during inflammation. Three-dimensional-printed lab-on-a-chip (LOC) devices, which can utilize one o...

(This article belongs to the Special Issue Electrochemical Impedance Spectroscopy (EIS): Biosensing Applications)
  • Article
  • Open Access
9 Citations
4,260 Views
13 Pages

27 July 2022

Among various volatile organic compounds (VOCs) emitted from human skin, trans-2-nonenal, benzothiazole, hexyl salicylate, α-hexyl cinnamaldehyde, and isopropyl palmitate are key indicators associated with the degrees of aging. In our study, ex...

(This article belongs to the Special Issue Solid-Phase Microextraction and Related Techniques in Bioanalysis)
  • Article
  • Open Access
2 Citations
3,220 Views
17 Pages

29 October 2023

With the development of microsatellite technology, the heat generated by onboard components is increasing, leading to a growing demand for improved thermal dissipation in small satellites. Metal powder additive manufacturing technology offers the pos...

(This article belongs to the Special Issue 3D & 4D Printing in Engineering Applications)
  • Article
  • Open Access
34 Citations
19,181 Views
17 Pages

This paper discusses the approach of biomimetic design in architecture applied to the theme of growth in biology by taking two exemplary research projects at the intersection of arts and sciences. The first project, ‘Biornametics’, dealt with pattern...

(This article belongs to the Special Issue Biomimetics in Sustainable Architectural and Urban Design)
  • Article
  • Open Access
4 Citations
4,082 Views
12 Pages

The Effect of Stacking on the Accuracy of 3D-Printed Full-Arch Dental Models

  • Olan Hartley,
  • Tanvi Shanbhag,
  • Derek Smith,
  • Antonio Grimm and ,
  • Ziad Salameh,
  • Santosh K. Tadakamadla,
  • Frank Alifui-Segbaya and
  • Khaled E. Ahmed
  • + 3 authors+ 0 author

13 December 2022

The objective of this study was to assess the effect of stacking on the dimensional and full-arch accuracy of 3D-printed models, utilising a standardised assessment methodology. A previously validated methodology involving a standard tessellation lan...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
752 Views
21 Pages

3 September 2026

Material extrusion 3D printing has been widely used in industrial, educational and residential environments. However, the associated emissions and exposure health impacts need to be evaluated, especially for the new and emerging filament materials. T...

(This article belongs to the Special Issue Advances in Additive Manufacturing for Metallic Materials and Their Applications (4th Edition))
  • Article
  • Open Access
2 Citations
1,950 Views
19 Pages

27 October 2025

The fabrication of support-free structures in pellet additive manufacturing (PAM) is severely limited by gravity-induced sagging, a phenomenon lacking predictive, physics-based models. This study introduces and validates a numerical model for the the...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
8 Citations
7,448 Views
14 Pages

Development of a Calibration Strip for Immunochromatographic Assay Detection Systems

  • Yue-Ming Gao,
  • Jian-Chong Wei,
  • Peng-Un Mak,
  • Mang-I. Vai and ,
  • Min Du and
  • Sio-Hang Pun
  • + 1 author+ 0 author

29 June 2016

With many benefits and applications, immunochromatographic (ICG) assay detection systems have been reported on a great deal. However, the existing research mainly focuses on increasing the dynamic detection range or application fields. Calibration of...

(This article belongs to the Special Issue Point-of-Care Biosensors)
  • Article
  • Open Access
8 Citations
4,042 Views
17 Pages

Falsified medicines are a major issue and a threat around the world. Various approaches are currently being investigated to mitigate the threat. In this study, a concept is tested that encodes binary digits (bits) on the surface of Fused Deposition M...

(This article belongs to the Special Issue Additive Manufacturing Approaches to Produce Drug Delivery Systems)
  • Article
  • Open Access
9 Citations
3,268 Views
16 Pages

Waterborne Polyurethane Acrylates Preparation towards 3D Printing for Sewage Treatment

  • Kunrong Li,
  • Yan Li,
  • Jiale Hu,
  • Yuanye Zhang and ,
  • Zhi Yang,
  • Shuqiang Peng,
  • Lixin Wu and
  • Zixiang Weng
  • + 3 authors+ 0 author

5 May 2022

Conventional immobilized nitrifying bacteria technologies are limited to fixed beds with regular shapes such as spheres and cubes. To achieve a higher mass transfer capacity, a complex-structured cultivate bed with larger specific surface areas is us...

  • Article
  • Open Access
60 Citations
7,558 Views
30 Pages

Photochemical Study of a New Bimolecular Photoinitiating System for Vat Photopolymerization 3D Printing Techniques under Visible Light

  • Paweł Fiedor,
  • Maciej Pilch,
  • Patryk Szymaszek,
  • Anna Chachaj-Brekiesz and ,
  • Mariusz Galek and
  • Joanna Ortyl
  • + 1 author+ 0 author

2 March 2020

In this work, we presented a new bimolecular photoinitiating system based on 2-amino-4,6-diphenylpyridine-3-carbonitrile derivatives as visible photosensitizers of diphenyliodonium salt. Real-time FTIR and photo-DSC photopolymerization experiments wi...

(This article belongs to the Special Issue Recent Advances in Photoredox Catalysts)
  • Article
  • Open Access
17 Citations
2,982 Views
15 Pages

Three-Dimensional-Printed Polymeric Cores for Methane Hydrate Enhanced Growth

  • Andrey Stoporev,
  • Rail Kadyrov,
  • Tatyana Adamova,
  • Evgeny Statsenko and ,
  • Thanh Hung Nguyen,
  • Murtazali Yarakhmedov,
  • Anton Semenov and
  • Andrey Manakov
  • + 3 authors+ 0 author

15 May 2023

Polymeric models of the core prepared with a Raise3D Pro2 3D printer were employed for methane hydrate formation. Polylactic acid (PLA), acrylonitrile butadiene styrene (ABS), carbon fiber reinforced polyamide-6 (UltraX), thermoplastic polyurethane (...

(This article belongs to the Special Issue 3D Printing of Functional Polymer Composites)
  • Article
  • Open Access
5 Citations
3,086 Views
19 Pages

Rapid Parametric CAx Tools for Modelling Morphing Wings of Micro Air Vehicles (MAVs)

  • Ángel Antonio Rodríguez-Sevillano,
  • María Jesús Casati-Calzada,
  • Rafael Bardera-Mora,
  • Javier Nieto-Centenero and ,
  • Juan Carlos Matías-García and
  • Estela Barroso-Barderas
  • + 1 author+ 0 author

This paper shows a series of tools that help in the research of morphing micro air vehicles (MAVs). These tools are aimed at generating parametric CAD models of wings in a few seconds that can be used in aerodynamic studies, either via CFD directly u...

(This article belongs to the Special Issue Structures, Actuation and Control of Morphing Systems)
  • Article
  • Open Access
2 Citations
2,584 Views
17 Pages

6 December 2022

Due to the ever-changing business environment, enterprises are facing unprecedented challenges in their new-product development (NPD) processes, while the success and survival of NPD projects have become increasingly challenging in recent years. Thus...

(This article belongs to the Topic Artificial Intelligence in Smart Industrial Diagnostics and Manufacturing)
  • Article
  • Open Access
30 Citations
5,191 Views
12 Pages

Direct Ink 3D Printing of Porous Carbon Monoliths for Gas Separations

  • Marisa L. Comroe,
  • Kurt W. Kolasinski and
  • Dipendu Saha

2 September 2022

Additive manufacturing or 3D printing is the advanced method of manufacturing monolithic adsorbent materials. Unlike beads or pellets, 3D monolithic adsorbents possess the advantages of widespread structural varieties, low heat and mass transfer resi...

(This article belongs to the Special Issue Carbon-Based Materials for Sustainable Chemistry)
  • Article
  • Open Access
1 Citations
1,467 Views
20 Pages

Available models for mass transport in microfluidic electrochemical sensors fall short in capturing critical features of millimeter-scale devices 3D-printed using fused deposition modeling, including inherent porosity and non-flat electrode geometrie...

(This article belongs to the Special Issue Electrochemical Sensors and Biosensors: Recent Advances and Future Challenges)
  • Article
  • Open Access
34 Citations
7,865 Views
21 Pages

The “Federica” Hand

  • Daniele Esposito,
  • Sergio Savino,
  • Emilio Andreozzi,
  • Chiara Cosenza and ,
  • Vincenzo Niola and
  • Paolo Bifulco
  • + 1 author+ 0 author

Hand prostheses partially restore hand appearance and functionalities. In particular, 3D printers have provided great opportunities by simplifying the manufacturing process and reducing costs. The “Federica” hand is 3D-printed and equipped with a sin...

  • Article
  • Open Access
3 Citations
1,920 Views
18 Pages

This paper describes the process of producing chemiresistors based on hybrid nanostructures obtained from graphene and conducting polymers. The technology of graphene presumed the following: dispersion and support stabilization based on the chemical...

(This article belongs to the Section Materials Science)
  • Article
  • Open Access
32 Citations
6,658 Views
13 Pages

Scaffold-Free Bioprinter Utilizing Layer-By-Layer Printing of Cellular Spheroids

  • Wesley LaBarge,
  • Andrés Morales,
  • Daniëlle Pretorius,
  • Asher M. Kahn-Krell and ,
  • Ramaswamy Kannappan and
  • Jianyi Zhang
  • + 1 author+ 0 author

29 August 2019

Free from the limitations posed by exogenous scaffolds or extracellular matrix-based materials, scaffold-free engineered tissues have immense clinical potential. Biomaterials may produce adverse responses, interfere with cell–cell interaction, or aff...

(This article belongs to the Special Issue 3D Printing for Tissue Engineering and Regenerative Medicine)
  • Review
  • Open Access
229 Citations
21,297 Views
25 Pages

Polylactic acid (PLA) filaments are very popular as a thermoplastic source used in the 3D printing field by the “Fused Deposition Modeling” method in the last decade. The PLA market is expected to reach 5.2 billion US dollars in 2020 for...

(This article belongs to the Special Issue Colloids and Interfaces in Printing Technology)
  • Article
  • Open Access
628 Views
17 Pages

27 February 2026

Heat creep is a critical failure mechanism in fused filament fabrication (FFF) extrusion systems, arising from insufficient thermal isolation between the hot end and cold end. It causes premature polymer softening, extrusion instability, and nozzle c...

(This article belongs to the Section Power Electronics)
  • Article
  • Open Access
24 Citations
6,082 Views
13 Pages

Comparison of Two 3D-Printed Indirect Bonding (IDB) Tray Design Versions and Their Influence on the Transfer Accuracy

  • Julius von Glasenapp,
  • Eva Hofmann,
  • Julia Süpple,
  • Paul-Georg Jost-Brinkmann and
  • Petra Julia Koch

26 February 2022

Objective: This study aims to investigate the transfer accuracy of two different design versions for 3D-printed indirect bonding (IDB) trays. Materials and Methods: Digital plaster models of 27 patients virtually received vestibular attachments on ev...

(This article belongs to the Collection Digital Dentistry: Advances and Challenges)
  • Article
  • Open Access
206 Citations
10,766 Views
15 Pages

Effect of Process Parameters on Tensile Mechanical Properties of 3D Printing Continuous Carbon Fiber-Reinforced PLA Composites

  • Hao Dou,
  • Yunyong Cheng,
  • Wenguang Ye,
  • Dinghua Zhang and ,
  • Junjie Li,
  • Zhoujun Miao and
  • Stephan Rudykh
  • + 2 authors+ 0 author

31 August 2020

Three-dimensional (3D) printing continuous carbon fiber-reinforced polylactic acid (PLA) composites offer excellent tensile mechanical properties. The present study aimed to research the effect of process parameters on the tensile mechanical properti...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
98 Citations
4,885 Views
16 Pages

3D and 4D Printing of PETG–ABS–Fe3O4 Nanocomposites with Supreme Remotely Driven Magneto-Thermal Shape-Memory Performance

  • Kiandokht Mirasadi,
  • Davood Rahmatabadi,
  • Ismaeil Ghasemi,
  • Mohammad Khodaei and ,
  • Majid Baniassadi,
  • Mahdi Bodaghi and
  • Mostafa Baghani
  • + 2 authors+ 0 author

14 May 2024

This study introduces novel PETG–ABS–Fe3O4 nanocomposites that offer impressive 3D- and 4D-printing capabilities. These nanocomposites can be remotely stimulated through the application of a temperature-induced magnetic field. A direct gr...

(This article belongs to the Section Smart and Functional Polymers)
  • Article
  • Open Access
3 Citations
6,430 Views
21 Pages

Research on Additive Technique Parameter Optimization for Robotic Gripper Construction

  • Emilian Paduraru,
  • Catalin-Gabriel Dumitras,
  • Dragos-Florin Chitariu,
  • Mihaita Horodinca and
  • Florin Chifan

Designing an industrial robot gripper suitable for today’s industry is a challenging task due to the rapid evolution of products. Industrial robots are involved in machining, the transfer of parts, control and assembly, and the number of tasks...

(This article belongs to the Section Industrial Systems)
  • Review
  • Open Access
952 Views
47 Pages

Quality by Design and Process Analytical Technology for On-Demand Drug Manufacturing Through 3D Printing

  • Imola-Rebeka Turac,
  • Tibor Casian,
  • Sonia Iurian,
  • Alina Porfire and ,
  • Rareș Iovanov,
  • Daniela Elena Popa and
  • Ioan Tomuță
  • + 2 authors+ 0 author

Additive manufacturing, also known as 3D printing (3DP), is intended to enable personalised medicine by producing drug products on demand at the Point of Care (PoC), with dose, drug-release profile, and geometry tailored to the individual patient. De...

(This article belongs to the Section Pharmaceutical Technology, Manufacturing and Devices)
  • Article
  • Open Access
11 Citations
4,413 Views
13 Pages

17 October 2024

Anode-free lithium batteries (AFLBs) present an opportunity to eliminate the need for conventional graphite electrodes or excess lithium–metal anodes, thus increasing the cell energy density and streamlining the manufacturing process. However,...

(This article belongs to the Section Battery Materials and Interfaces: Anode, Cathode, Separators and Electrolytes or Others)

of 2