Porous composites utilize their unique pore structures to effectively store and release lubricants, providing a fundamental mechanism for continuous lubrication in self-lubricating bearing cages. This study investigates carbon nanotube (CNT)-reinforc...
NaCl particles were added into Polyetheretherketone (PEEK) and its composites to produce porous PEEK-based materials by washing NaCl away after the high-temperature compression molding process. After that, an ionic liquid was added into the porous ma...
To address the problems of the difficult processing and internal microstructure disorder of porous bearing cages, Polyetheretherketone (PEEK) porous self-lubricating bearing cage material was prepared based on a fused deposition molding (FDM) process...
Bone regeneration for replacing and repairing damaged and defective bones in the human body has attracted much attention over the last decade. In this research, highly porous polyetheretherketone (PEEK)/hydroxyapatite (HA) bionanocomposite scaffolds...
Incidents of lumbar degenerative diseases, such as spinal stenosis and degenerative spondylolisthesis, are increasing due to the aging population, and as a result, posterior lumbar interbody fusion (PLIF) is widely used. However, the interbody fusion...
Addition of bioactive materials such as calcium phosphates or Bioglass, and incorporation of porosity into polyetheretherketone (PEEK) has been identified as an effective approach to improve bone-implant interfaces and osseointegration of PEEK-based...
Titanium powders and hydroxyapatite powders were used to fabricate the titanium and hydroxyapatite composite coating (Ti/Ti/HA) on the Polyetheretherketone (PEEK) by vacuum plasma spraying (VPS). The phase composition and morphology of the Ti/Ti/HA c...
Background and Objectives: To prevent postoperative problems in extreme lateral interbody fusion (XLIF), it is critical that the vertebral endplate not be injured. Unintentional endplate injuries may depend on the cage. A novel porous titanium cage f...
Additive manufacturing enables the fabrication of porous polyetheretherketone (PEEK) structures with controlled architectures for biomedical applications. In particular, porous PEEK scaffolds have attracted significant attention due to their potentia...
Pure orbital blowout fractures occur within the confines of the internal orbital wall. Restoration of orbital form and volume is paramount to prevent functional and esthetic impairment. The anatomical peculiarity of the orbit has encouraged surgeons...
Background: Cranioplasty using porous hydroxyapatite (PHA) implants is an established technique for cranial reconstruction due to its favorable osteointegration properties. However, the intrinsic fragility of PHA implants before complete osteointegra...
Owing to its excellent mechanical properties and biocompatibility, polyetheretherketone (PEEK) is a promising biomaterial in dental and medical fields. However, PEEK lacks osteoconductive and osteoinductive properties for efficient bone regeneration....
Here, titanium porous substrates were fabricated by a space holder technique. The relationship between microstructural characteristics (pore equivalent diameter, mean free-path between pores, roughness and contact surface), mechanical properties (You...
Polyetheretherketone (PEEK) is the only polymer material that can replace titanium implants in the field of orthopedics. This is because the mechanical properties of PEEK are similar to those of bone, and PEEK has natural radiolucency, chemical stabi...
Polyetheretherketone (PEEK) is a promising biomedical material for orthopedic and dental applications due to its excellent mechanical properties, low immunogenicity, and X-ray transparency. However, it exhibits bio-inertness and limited osteoconducti...
Background: Anterior cervical discectomy and interbody fusion (ACDF) may be performed with different kinds of stand-alone cages. Tantalum and polyetheretherketone (PEEK) are two of the most commonly used materials in this procedure. Few comparisons b...
Three-dimensional (3D) printing, medical imaging, and implant design have all advanced significantly in recent years, and these developments may change how modern craniomaxillofacial surgeons use patient data to create tailored treatments. Polyether-...
There has been a recent uptake in the use of polyether-ether-ketone (PEEK), which is an organic thermoplastic polymer, in the manufacturing of various medical devices, implants, and equipment. Finding the best time and procedure for PEEK after sulfon...
Herein, we report a method to additively manufacture carbon fiber-reinforced siliconized silicon carbide composites. The process involves the pyrolysis of a 3D-printed carbon fiber-reinforced poly-ether-ether-ketone (PEEK) composite to produce a poro...
Polyetheretherketone (PEEK) is a potential substitute for conventional metallic biomedical implants owing to its superior mechanical and chemical properties, as well as biocompatibility. However, its inherent bio-inertness and poor osseointegration l...
Biomolecule grafting on polyether ether ketone (PEEK) was used to improve cell affinity caused by surface inertness. This study demonstrated the sequence-polished (P) and sulfonated (SA) PEEK modification to make a 3D structure, active biomolecule gr...
In this article, recent advances in the development, preparation, biocompatibility and mechanical properties of polyetheretherketone (PEEK) and its composites for hard and soft tissue engineering are reviewed. PEEK has been widely employed for fabric...
Hybrid bone substitute made up of a 3D printed polyetheretherketone (PEEK) scaffold coated with methacrylated hyaluronic acid (MeHA)-hydroxyapatite (HAp) hydrogel is the objective of the present work. Development and characterization of the scaffold...
Porosity and roughened surfaces of implant materials have been shown to lead to improved cellular attachment and enhanced osseointegration. These topography changes in the surface also aid in the mechanical interlocking of the material to the bone. P...
Porous titanium interbody scaffolds are growing in popularity due to their appealing advantages for bone ingrowth. This study aimed to investigate the biomechanical effects of scaffold materials in both normal and osteoporotic lumbar spines using a f...
Polyether-ether-ketone (peek) is one of the most common materials used for load-bearing orthopedic devices owing to its radiolucency and favorable mechanical properties. However, current smooth-surfaced peek implants can lead to fibrous capsule forma...
Polymers, in general, and Poly (Ether-Ether-Ketone) (PEEK) have emerged as potential alternatives to conventional osseous implant biomaterials. Due to its distinct advantages over metallic implants, PEEK has been gaining increasing attention as a pri...
24 December 2025
Orthognathic surgery restores functional balance and facial esthetics in patients with dentofacial deformities. The use of adjunctive facial implants—made from materials such as porous polyethylene, titanium, or polyetheretherketone (PEEK)&mdas...
In the present study, the antimicrobial peptide nisin was successfully conjugated onto the surface of sulfonated polyetheretherketone (SPEEK), which was decorated with graphene oxide (GO) to investigate its biofilm resistance and antibacterial proper...
Repairing bone defects with implants is an important topic in the field of regenerative medicine, but bacterial infection presents a significant barrier in clinical practice. Therefore, bone implants with antibacterial functionality are currently in...
Polyetheretherketone (PEEK) has emerged as the material of choice for spinal fusion devices, replacing conventional materials such as titanium and its alloys due to its ability to easily overcome a lot of the limitations of traditional metallic bioma...
More contemporary options have been presented in the last few years as surgical methods and materials have improved in patients with degenerative spine illnesses. The use of biologically integrated titanium cages of a unique design based on computer...
Background: The treatment of spheno-orbital meningiomas (SOMs) requires extensive bone resections, creating significant defects in a complex geometrical space. Bone reconstruction represents a fundamental step that optimizes long-term aesthetic and f...
Biological acceptance is one of the most important aspects of a biomaterial and forms the basis for its clinical use. The aim of this study was a comprehensive biological evaluation (cytotoxicity test, bacterial colonization test, blood platelets adh...
Biomimetic hydrogel lubrication coatings with high wettability and low friction show great promise in tissue engineering, wound dressing, drug delivery, and intelligent sensing. Inspired by the hierarchical structure of natural cartilage, a layered h...
Herein, we report a new approach for the sulfonation of polyether ether ketone (PEEK) following a shorter path of reaction undertaken at 60 °C under ultrasonication. The application of this method enabled the reduction of the reaction time from s...
Ultra-high-molecular-weight polyethylene (UHMWPE) components for orthopedic implants have historically been integrated into metal backings by direct-compression molding (DCM). However, metal backings are costly, stiffer than cortical bone, and may be...
Icing and ice accretion cause severe problems in different industrial sectors, e.g., in aircrafts, aviation traffic, ships, solar panels, and wind turbines. This can lead to enormous economic losses and serious safety issues. Surface engineering can...
Porous ultra-high molecular weight polyethylene (UHMWPE) is a high-performance bioinert polymer used in cranio-facial reconstructive surgery in procedures where relatively low mechanical stresses arise. As an alternative to much stiffer and more cost...
This paper shows the development of a freeze-drying stage for in-situ μ-CT measurements. The stage can operate in a temperature range of −40 °C up to 70 °C, and a pressure range from atmospheric pressure to 7 Pa at the sample holder....
Lithium-based rechargeable batteries such as lithium-ion (Li-ion), lithium-sulfur (Li-S), and lithium-air (Li-air) cells typically consist of heterogenous porous electrodes. In recent years, there has been growing interest in the use of in-situ and o...
Endowing implants with antibacterial ability and osteogenic ability plays important roles in preventing post-operative bacterial contamination and facilitating integration between implants and osseous tissue, consequently reducing implant failure rat...
Objective: This narrative review synthesizes current evidence on materials and manufacturing technologies for customized dental implants, highlighting their comparative advantages and limitations. Methods: A structured literature search (December 202...