- Review
Lithium–sulfur batteries (LSBs) are recognized as one of the second-generation electrochemical energy storage systems with the most potential due to their high theoretical specific capacity of the sulfur cathode (1675 mAhg−1), abundant el...
Lithium–sulfur batteries (LSBs) are recognized as one of the second-generation electrochemical energy storage systems with the most potential due to their high theoretical specific capacity of the sulfur cathode (1675 mAhg−1), abundant el...
Overloading and climate change are often problems in pavement structures. For this reason, hard asphalt binders have high softening points, are elastic, and have good adhesion, which is needed to improve pavement performance. Asphalt binder performan...
Separation of refined silicon from Al–Si melt is still a puzzle for the solvent refining process, resulting in considerable waste of acid and silicon powder. A novel modified Czochralski method within the Al–Si alloy is proposed. After th...
The structures and applications of metal-organic framework materials (MOFs) have been attracting great interest due to the wide variety of possible applications, for example, chemical sensing, separation, and catalysis. N-[3-(Trimethoxysilyl)propyl]e...
This paper describes the fabrication of novel modified polyethylene (PE) membranes using plasma technology to create high-performance and cost-effective separator membranes for practical applications in lithium-ion polymer batteries. The modified PE...
A novel hybrid membrane was developed on the basis of poly(m-phenylene isophthalamide) (PA) by introducing an original complex modifier into the polymer; this modifier consisted of equal amounts of heteroarm star macromolecules with a fullerene C60 c...
Silicas chemically modified with a number of sulfur-containing groups (mercaptopropyl, mercaptophenyl, dipropyl disulfide, thiadiazole thiol, dithiocarbamate and thiourea derivatives) were proposed for the separation and preconcentration of precious...
As a kind of volatile organic compound (VOC), methyl tert-butyl ether (MTBE) is hazardous to human health and destructive to the environment if not handled properly. MTBE should be removed before the release of wastewater. The present work supported...
Lithium-sulfur (Li-S) batteries have become promising candidates for electrical energy storage systems due to their high theoretical specific energy density, low cost and environmental friendliness. However, there are some technical obstacles of lith...
In this work, the ceramic coating separator (CCS-CS) prepared with polyethylene (PE) separator, Al2O3 inorganic particles, carboxymethyl cellulose sodium (CMC) and styrene-butadiene rubber (SBR) mix binders is further modified by coating with a thin...
Thin-film composite mixed matrix membranes (CMMMs) were fabricated using interfacial polymerization to achieve high permeance and selectivity for CO2 separation. This study revealed the role of substrate properties on performance, which are not typic...
Lithium–sulfur batteries (LSBs) are recognized as among the best potential alternative battery systems to lithium-ion batteries and have been widely investigated. However, the shuttle effect has severely restricted the advancement in their prac...
Separators dominate lithium-ion battery (LIB) safety by isolating electrodes, guiding Li+ transport and avoiding short circuits. However, commercial polypropylene (PP) separators suffer from inferior electrolyte wettability, severe thermal shrinkage,...
Thermosetting unsaturated polyester resin (UPR) is difficult to reprocess because curing generates an irreversible three-dimensional network. Here, cured UPR was treated in a microwave-assisted hydrazine hydrate/NaOH medium at 70 °C for 30 min to...
The commercialization of Lithium-sulfur batteries was limited by the polysulfide shuttle effect, and modifying the routine separator was an effective method to solve this problem. In this work, a novel hierarchically porous polypyrrole sphere (PPS) w...
Lithium–sulfur batteries (LSBs) offer a theoretical energy density of 2600 Wh kg−1 but suffer from the polysulfide shuttle effect, which causes rapid capacity decay and limits practical application. To address this, we developed a bifunct...
To prepare anti-fouling and self-cleaning membrane material, a physical blending modification combined with surface grafting modification has been carried out; first, poly (2-hydroxyethyl methacrylate) grafted silica nanoparticles (SiO2-g-PHEMA NPs)...
The lithium-sulfur (Li-S) battery has been regarded as an important candidate for the next-generation energy storage system due to its high theoretical capacity (1675 mAh g−1) and high energy density (2600 Wh kg−1). However, the shuttle e...
Paper chromatography is a low-cost and facile analytical method traditionally used to analyze hydrophilic substances. For the application to substances with lower polarity, we prepared a stationary phase based on filter paper modified with phenyl iso...
The nitrogen-doped MXene carbon nanosheet-nickel (N-M@CNi) powder was successfully prepared by a combined process of electrostatic attraction and annealing strategy, and then applied as the separator coating in lithium–sulfur batteries. The mor...
The adhesion between electrode and separator is a key feature in cell assembly. Nafion™-coated separators for water-processed LiNi0.5Mn1.5O4 (LNMO) electrodes are here proposed as an alternative to the polyolefin separators. Specifically, polyo...
Membranes are widely used for liquid separations such as removing solute components from solvents or liquid/liquid separations. Due to negligible vapor pressure, adjustable physical properties, and thermal stability, the application of ionic liquids...
Polysulfone (PSF), despite its excellent thermal and mechanical stability, exhibits moderate gas separation performance and poor compatibility with inorganic fillers, resulting in interfacial voids and structural defects. This study addressed these l...
In this paper, a new polymeric membrane including polymers (cellulose acetate, polyethylene glycol 400), copolymer poly(4-vinylpyridine)-block-polystyrene, and TiO2 nanoparticles were synthesized by the phase inversion method. In order to investigate...
Proper plant leaf disease (PLD) detection is challenging in complex backgrounds and under different capture conditions. For this reason, initially, modified adaptive centroid-based segmentation (ACS) is used to trace the proper region of interest (RO...
Closantel is an antiparasitic drug marketed in a racemic form with one chiral center. It is meaningful to develop a method for separating and analyzing the closantel enantiomers. In this work, two enantiomeric separation methods of closantel were exp...
Lithium–sulfur (Li-S) batteries are hindered by the sluggish electrochemical kinetics and poor reversibility of lithium polysulfides (LiPSs), which limits their practical energy density and cycle life. In order to address this issue, a novel Ni...
Lithium–sulfur (Li–S) batteries hold great promise for next-generation energy storage owing to their ultrahigh theoretical energy density; however, their practical application is severely hampered by the polysulfide shuttle effect and the...
Lithium–sulfur batteries (LSB) show excellent potential as future energy storage devices with high energy density, but their slow redox kinetics and the shuttle effect seriously hinder their commercial application. Herein, a 0D@2D composite was...
A mechanical model of a laterally loaded long pile in layered soils was established to accurately calculate the lateral load-bearing performance of the pile foundation, and attention was paid to the influence of the complete separation of the pile&nd...
Fluoroalkyl end-capped vinyltrimethoxysilane oligomeric silica/alkyl-modified cellulose (AM-Cellu) nanocomposites [RF-(CH2-CHSiO2)n-RF/AM-Cellu; n = 2, 3; RF = CF(CF3)OC3F7] were prepared by the sol-gel reactions of the corresponding oligomer [RF-(CH...
This research study aimed to assess the influence of different particle sizes of crumb rubber modifier on phase separation when mixed with virgin asphalt binder (PG 64-22). Both Superpave and multiple stress creep recovery (MSCR) tests were conducted...
Fabrication of a nanocrystalline zinc oxide (ZnO)/nitrogen-doped graphene (NDG) composite using a novel and facile in situ sol-gel technique is demonstrated in this study. A two-dimensional nanostructured morphology with uniform ZnO nanoparticles (av...
Natural gas streams extracted from production wells often contain undesirable components such as water vapor, gas condensate, and solid particulates. These impurities reduce fuel quality and damage downstream equipment through corrosion, fouling, and...
The deployment of Li–S batteries in the commercial sector faces obstacles due to their low electrical conductivity, slow redox reactions, quick fading of capacity, and reduced coulombic efficiency. These issues stem from the “shuttle effe...
Chiral molecules are stereoselective with regard to specific biological functions. Enantiomers differ considerably in their physiological reactions with the human body. Safeguarding the quality and safety of drugs requires an efficient analytical pla...
Future operations involving drones are expected to result in traffic densities that are orders of magnitude higher than any observed in manned aviation. Current geometric conflict resolution (CR) methods have proven to be very efficient at relatively...
High energy density lithium–sulfur batteries (LSBs) are a potential replacement for lithium-ion batteries (LIBs). However, practical lifetimes are inhibited by lithium polysulfide (LiPS) shuttling. Concurrently, plastic waste accumulation world...
In this paper, a composite separator for lithium-ion batteries was successfully prepared by electrostatic spinning, based on polyacrylonitrile (PAN) and 5% cellulose nanocrystals (CNCs) derived from sisal fiber. Its physical and electrochemical prope...
To overcome the shortcomings of traditional polyurethane, such as poor weather resistance and susceptibility to hydrolysis, this study systematically explores the preparation techniques of organic silicon-modified polyurethane and its application in...
In the field of lithium-ion batteries, the challenges posed by the low melting point and inadequate wettability of conventional polyolefin separators have increased the focus on ceramic-coated separators. This study introduces a highly efficient and...
Finding an appropriate technical solution for reusing waste plastics is crucial for creating a circular plastic economy. Although mechanical recycling is the best option for recycling post-consumer plastics, some heterogeneous mixed plastics cannot b...
The unconsolidated sandstone is a type of rock that has poor cementation, a low strength, a high porosity, and permeability. It is highly compressible under high stress and exhibits non-linear plastic deformation during hydraulic fracturing construct...
The effects of climate change are just beginning to be felt, and as such, society must work towards strategies of reducing humanity’s impact on the environment. Due to the fact that energy production is one of the primary contributors to greenhouse g...
Chemical doping of ceramic oxides may provide a possible route for realizing high-efficient oxygen transport membranes. Herein, we present a study of the previously unreported dual-phase mixed-conducting oxygen-permeable membranes with the compositio...
In this paper, the major problems associated with detached eddy simulation (DES) (namely, modeled stress depletion (MSD) and slowing of the RANS to LES transition (RLT)) are discussed and reviewed, and relevant improvements are developed. A modified...
Organosubstituted silica derivatives were synthesized and investigated as modifiers of block copolymers based on macroinitiator and 2,4-toluene diisocyanate. A peculiarity of the modified block copolymers is the existence in their structure of coplan...
The commercialization of lithium metal batteries is hindered by critical challenges such as uncontrollable lithium dendrite growth and interfacial instability. Constructing functional nanocoatings on separator surfaces represents an effective strateg...
7,7,8,8-Tetracyanoquinomethane (TCNQ) was added to polyvinylpyrrolidone (PVP)/CuO composites to modify and prevent agglomeration of the particles, and thus the CuO particles were well dispersed to a small size, thereby increasing CO2 solubility and s...
Electrospun polyvinyl alcohol (PVA) nanofiber fabric was modified by Cibacron Blue F3GA (CB) to enhance the affinity of the fabric. Batch experiments were performed to study the nanofiber fabric’s bovine hemoglobin (BHb) adsorption capacity at differ...
of 75