Skip to Content

973 Results Found

  • Article
  • Open Access
17 Citations
2,678 Views
12 Pages

Experimental Study on the Influence of Rotational Speed on Grinding Efficiency for the Vertical Stirred Mill

  • Biliang Tang,
  • Bo Cheng,
  • Xianzhou Song,
  • Haonan Ji and ,
  • Yijiang Li and
  • Zhaohua Wang
  • + 1 author+ 0 author

27 November 2024

The rotational speed of the agitator is one of the important parameters that affect the grinding efficiency of the vertical stirred mill. Increasing the speed will improve the grinding effect, but it will increase energy consumption, and determining...

(This article belongs to the Special Issue Comminution and Comminution Circuits Optimisation: 3rd Edition)
  • Article
  • Open Access
14 Citations
9,363 Views
17 Pages

18 February 2020

The rotation speed of a mill is an important factor related to its operation and grinding efficiency. Analysis and regulation of the optimal speed under different working conditions can effectively reduce energy loss, improve productivity, and extend...

(This article belongs to the Special Issue Process Optimization and Control)
  • Article
  • Open Access
37 Citations
6,690 Views
19 Pages

Effect of Grinding Conditions on Clinker Grinding Efficiency: Ball Size, Mill Rotation Speed, and Feed Rate

  • Yahya Kaya,
  • Veysel Kobya,
  • Ali Mardani,
  • Naz Mardani and
  • Hatice Elif Beytekin

The production of cement, an essential material in civil engineering, requires a substantial energy input, with a significant portion of this energy consumed during the grinding stage. This study addresses the gap in the literature concerning the col...

(This article belongs to the Special Issue Energy Efficiency and Sustainability in Construction and Building Materials)
  • Article
  • Open Access
12 Citations
6,792 Views
12 Pages

8 May 2023

We hereby report a simple and efficient method for the preparation of 4-methylcoumarins series, including Coumarin 120 (7-amino-4-methylcoumarin) from phenols (or naphthols) and ethyl acetoacetate in the presence of 3 mol% InCl3. Coumarins were obtai...

(This article belongs to the Section Molecular Organics)
  • Article
  • Open Access
8 Citations
4,240 Views
11 Pages

18 December 2023

Milling machines have made denture fabrication possible with high accuracy in a short time. However, the relationship between the milling conditions, accuracy, and milling duration has not been clarified. This study aimed to clarify the effects of mi...

(This article belongs to the Special Issue CAD & CAM Dentistry)
  • Article
  • Open Access
8 Citations
2,763 Views
13 Pages

An Experimental Investigation on Micro End Milling with High-Speed Up Cut Milling for Hardened Die Steel

  • Haruki Kino,
  • Takumi Imada,
  • Keiji Ogawa,
  • Heisaburo Nakagawa and
  • Hitomi Kojima

23 October 2020

The importance of micromachining using small diameter end mills and the dies used for them has been increasing in the machining of small parts. However, the reality is that there are various requirements to improve the machining surface, machining ac...

(This article belongs to the Special Issue Machinability of Metallic Materials and Composites)
  • Article
  • Open Access
12 Citations
2,643 Views
11 Pages

27 May 2022

The accuracy of the acoustic signal prediction model for wood–plastic composites milling has an important influence on the condition monitoring of the cutting process and the improvement of the machining environment. To establish a high-precisi...

  • Article
  • Open Access
3 Citations
1,129 Views
28 Pages

9 April 2026

Minimum quantity lubrication (MQL) is a promising green technology for high-speed milling of GH4169. However, the full-chain oil mist penetration mechanism remains unclear, limiting precise parameter regulation. Based on a cross-scale mechanism, this...

(This article belongs to the Special Issue Sustainable Manufacturing and Green Processing Methods, 2nd Edition)
  • Feature Paper
  • Article
  • Open Access
12 Citations
2,595 Views
18 Pages

Analysis of High-Speed Milling Surface Topography and Prediction of Wear Resistance

  • Wei Zhang,
  • Kangning Li,
  • Weiran Wang,
  • Ben Wang and
  • Lei Zhang

24 February 2022

Surface topography parameters are an important factor affecting the wear resistance of parts, and topography parameters are affected by process parameters in order to explore the influence law of process parameters on surface topography parameters an...

(This article belongs to the Special Issue Advances in the Machined Surface Integrity in Manufacturing Process of Materials)
  • Article
  • Open Access
19 Citations
2,752 Views
16 Pages

Geometric Structures for Sialon Ceramic Solid End Mills and Its Performance in High-Speed Milling of Nickel-Based Superalloys

  • Kai Xue,
  • Peng Chen,
  • Wenbo Liu,
  • Bin Zou and ,
  • Lei Li,
  • Wei Chen,
  • Xinfeng Wang and
  • Ziyue Xu
  • + 3 authors+ 0 author

22 August 2023

Sialon ceramic tool material has become one of the most ideal materials for the high-speed cutting of superalloy materials. However, studies on the geometric structure of sialon ceramic solid end mill is lacking at the present. In this work, the geom...

  • Proceeding Paper
  • Open Access
5,588 Views
7 Pages

The forgiveness of golf putters is traditionally achieved through weight distribution. Higher MOI (moment of inertia) putters will show less ball speed loss on impacts away from the sweet spot. A very large MOI putter, however, may not be desired by...

(This article belongs to the Proceedings of The 12th Conference of the International Sports Engineering Association)
  • Article
  • Open Access
22 Citations
5,917 Views
16 Pages

Development and Testing of a High-Frequency Dynamometer for High-Speed Milling Process

  • Yanlin Lyu,
  • Muhammad Jamil,
  • Ning He,
  • Munish Kumar Gupta and
  • Danil Yurievich Pimenov

12 January 2021

Cutting forces are strongly associated with the mechanics of the cutting process. Hence, machining forces measurements are very important to investigate the machining process, and numerous methods of cutting forces measurements have been applied. Now...

(This article belongs to the Special Issue Dynamic Analysis of Multibody Mechanical Systems)
  • Article
  • Open Access
1 Citations
1,560 Views
16 Pages

Wear of End Mills with Carbon Coatings When Aluminum Alloy A97075 High-Speed Processing

  • Evgeny E. Ashkinazi,
  • Sergey V. Fedorov,
  • Artem K. Martyanov,
  • Dmitry N. Sovyk and ,
  • Victor G. Ralchenko,
  • Artem P. Litvinov,
  • Artem A. Ershov and
  • Vitaly I. Konov
  • + 3 authors+ 0 author

26 November 2024

It is recommended to use high-speed milling to maintain an effective material removal rate and the required cutting-edge geometry. However, on the other hand, high speed increases wear, so the surface of the cutters is modified by deposition function...

  • Article
  • Open Access
12 Citations
3,832 Views
15 Pages

16 July 2019

As one of the most promising micro-machining methods, electrochemical micro-machining is widely used in the field of metal micro-structures. The electrochemical micro-milling on Nickel-base superalloy by using high-speed spiral electrode was studied...

(This article belongs to the Section D: Materials and Processing)
  • Article
  • Open Access
29 Citations
3,303 Views
18 Pages

24 February 2021

Tool wear is a major cause of accelerated tool failure during the milling of aluminum alloy. The periodically cutting force directly affect the cutting heat and tool wear due to the intermittent cutting characteristics of the milling process. The foc...

  • Article
  • Open Access
22 Citations
3,925 Views
13 Pages

7 February 2022

We report on milling and tool wear characteristics of hybrid additive manufacturing comprising laser powder bed fusion and in situ high-speed milling, a particular process in which the cutter mills inside the powder bed without any cooling lubricant...

(This article belongs to the Special Issue Ultra-Precision Manufacturing Technology for Difficult-to-Machine Materials)
  • Article
  • Open Access
18 Citations
3,762 Views
12 Pages

23 August 2021

The paper presents the possibilities of a high-speed camera in recording displacements of thin-walled workpiece during milling made of aluminum alloys, which allowed for an analysis in which it was compared to other methods of testing the deflection...

(This article belongs to the Special Issue Innovative and Modern Technologies of Material Machining in Cutting and Abrasive Processes)
  • Article
  • Open Access
14 Citations
3,255 Views
25 Pages

Study on the High-Speed Milling Performance of High-Volume Fraction SiCp/Al Composites

  • Youzheng Cui,
  • Shenrou Gao,
  • Fengjuan Wang,
  • Qingming Hu and ,
  • Cheng Xu and
  • Fengxia Xu
  • + 1 author+ 0 author

25 July 2021

Compared with other materials, high-volume fraction aluminum-based silicon carbide composites (hereinafter referred to as SiCp/Al) have many advantages, including high strength, small change in the expansion coefficient due to temperature, high wear...

(This article belongs to the Special Issue Finite Element Modeling of Solid State Phenomena in Metals and Alloys)
  • Article
  • Open Access
18 Citations
4,469 Views
18 Pages

High-Speed Rotary Ultrasonic Elliptical Milling of Ti-6Al-4V Using High-Pressure Coolant

  • Mingliang Zhang,
  • Deyuan Zhang,
  • Hailin Guo,
  • Ze Gao and ,
  • Daxi Geng,
  • Jiajia Liu and
  • Xinggang Jiang
  • + 2 authors+ 0 author

10 April 2020

High-speed rotary ultrasonic elliptical milling (HRUEM), as a novel ultrasonic vibration cutting method, has been introduced in milling the alloy Ti-6Al-4V. The application of ultrasonic vibration in high-speed milling can help open the cutting conta...

  • Article
  • Open Access
3 Citations
893 Views
14 Pages

31 March 2025

The incremental hole-drilling method is widely used to measure residual stress distribution versus depth. In this study, a two-flute carbide end mill that was 1.5 mm in diameter operated at different rotational speeds, used to create a hole that was...

(This article belongs to the Special Issue Advanced Light Metal and Alloys: Preparation, Characterization, and Applications (2nd Edition))
  • Article
  • Open Access
16 Citations
5,131 Views
14 Pages

23 April 2020

Advanced materials with high strength are in great demand for structural applications, such as in aerospace. It has been proved that fabrication strategy plays a vital role in producing composites to satisfy these needs. This study explores new strat...

  • Article
  • Open Access
1 Citations
2,643 Views
17 Pages

4 November 2021

In thread milling, there exists a trade-off between thread manufacturing efficiency and thread quality. In this study, an integrated design of spindle speed modulation (SSM) and cutting vibration suppression (CVS) controls using a disturbance observe...

(This article belongs to the Special Issue Innovative and Modern Technologies of Material Machining in Cutting and Abrasive Processes)
  • Article
  • Open Access
4 Citations
1,584 Views
24 Pages

Study on Friction and Wear Performance of Bionic Function Surface in High-Speed Ball Milling

  • Youzheng Cui,
  • Xinmiao Li,
  • Minli Zheng,
  • Haijing Mu and ,
  • Chengxin Liu,
  • Dongyang Wang,
  • Bingyang Yan,
  • Qingwei Li,
  • Fengjuan Wang and
  • Qingming Hu
  • + 5 authors+ 0 author

10 July 2025

During the service life of automotive panel stamping dies, the surface is often subjected to high loads and repeated friction, resulting in excessive wear. This leads to die failure, reduced machining accuracy, and decreased production efficiency. To...

(This article belongs to the Section Friction and Tribology)
  • Article
  • Open Access
27 Citations
3,664 Views
14 Pages

Sustainable High-Speed Milling of Magnesium Alloy AZ91D in Dry and Cryogenic Conditions

  • Nabil Jouini,
  • Mohd Shahfizal Mohd Ruslan,
  • Jaharah A. Ghani and
  • Che Hassan Che Haron

18 February 2023

Magnesium alloy AZ91D is used extensively in the automotive industry because of its high strength-to-weight ratio. Typically, components produced using the alloy are required to have good surface finish and to contribute to high productivity but requ...

(This article belongs to the Section Sustainable Engineering and Science)
  • Article
  • Open Access
11 Citations
4,651 Views
11 Pages

2 August 2020

Because of the massive work and high cost of milling experiments, finite element analysis technology (FEA) was used to analyze the milling process of ADC12 aluminum alloy. An improved Johnson–Cook (J–C) constitutive equation was fitted by...

(This article belongs to the Section Powder Metallurgy)
  • Article
  • Open Access
11 Citations
4,083 Views
15 Pages

23 August 2024

This study investigates the influence of various tool coatings, cutting speeds, and feed per tooth values on cutting forces during the CNC milling of Medium Density Fiberboard (MDF). The coatings tested include reference, TripleSi, Hyperlox, DLC, and...

  • Article
  • Open Access
2,298 Views
34 Pages

New Approach to High-Speed Multi-Coordinate Milling Based on Kinematic Cutting Parameters and Acoustic Signals

  • Petr M. Pivkin,
  • Mikhail P. Kozochkin,
  • Artem A. Ershov,
  • Ludmila A. Uvarova and ,
  • Alexey B. Nadykto and
  • Sergey N. Grigoriev
  • + 1 author+ 0 author

In this work, a new approach to high-speed multi-coordinate milling was developed. The new approach is based on a new model of trochoidal machining; this is, in turn, based on the theoretical thickness of a chip and its ratio to the cutting edge&rsqu...

  • Article
  • Open Access
18 Citations
4,379 Views
14 Pages

21 March 2023

To investigate the formation mechanism of the white layer on the machined surface during high-speed milling of nickel-based superalloy GH4169, several cutting parameters were selected for milling experiments. Energy dispersive spectroscopy (EDS), X-r...

(This article belongs to the Topic Advanced Manufacturing and Surface Technology)
  • Article
  • Open Access
46 Citations
4,513 Views
17 Pages

30 July 2023

This article presents the results of experimental research on the effect of high-speed machining (HSM) in the milling process on the tool wear, surface layer properties, and fatigue life of objects made of Ti-6Al-4V titanium alloy. Titanium alloys ar...

(This article belongs to the Special Issue Manufacturing Technology: Materials, Innovations and Applications)
  • Article
  • Open Access
11 Citations
4,101 Views
17 Pages

Machining-Induced Surface Integrity Enhancement of Ti-6Al-4V Titanium Alloy via Ultrasonic Vibration Side Milling Under High-Speed Machining and Dry Conditions

  • Dong Wang,
  • Aowei Han,
  • Jinyong Han,
  • Mingliang Zhang and ,
  • Xiaodong Yan,
  • Fuquan Nie and
  • Zhenlong Peng
  • + 2 authors+ 0 author

Ti-6Al-4V titanium alloy is widely used in aerospace and other fields due to its excellent performance, but conventional machining has problems such as high cutting force, high temperature, and tool wear, which leads to the difficulty of balancing su...

  • Article
  • Open Access
8 Citations
5,318 Views
19 Pages

Optimizing Machining Efficiency in High-Speed Milling of Super Duplex Stainless Steel with SiAlON Ceramic Inserts

  • Monica Guimarães,
  • Victor Saciotto,
  • Qianxi He,
  • Jose M. DePaiva and ,
  • Anselmo Diniz and
  • Stephen Veldhuis
  • + 1 author+ 0 author

Super duplex stainless steels (SDSSs) are widely utilized across industries owing to their remarkable mechanical properties and corrosion resistance. However, machining SDSS presents considerable challenges, particularly at high speeds. This study in...

(This article belongs to the Special Issue Recent Advances in Surface Integrity with Machining and Milling)
  • Article
  • Open Access
9 Citations
9,373 Views
14 Pages

16 June 2016

Hot work tool steel (AISI H13) and high speed steel (AISI M3:2) powders were successfully co-sintered to produce hybrid tool steels that have properties and microstructures that can be modulated for specific applications. To promote co-sintering, whi...

(This article belongs to the Collection Spark-Plasma Sintering and Related Field-Assisted Powder Consolidation Technologies)
  • Article
  • Open Access
8 Citations
3,850 Views
14 Pages

As the correlation between design rules and process limitations is of the upmost importance for the full exploitation of any manufacturing technology, we report a design guide for hybrid-additive manufacturing of Inconel 718. Basic limitations need t...

(This article belongs to the Special Issue Advances in Powder Bed Fusion Technologies)
  • Article
  • Open Access
1 Citations
1,120 Views
23 Pages

In precision machining, tool wear is one of the primary factors affecting machining quality and production efficiency. This study developed intelligent prediction models for tool wear in the high-speed milling (HSM) of AISI 1045 medium-carbon steel b...

  • Review
  • Open Access
158 Views
31 Pages

Wiper-Assisted High-Speed Milling of Al7136 Aluminum Alloy: Machining Performance, Multidimensional Surface Integrity, and Implications for Coating Readiness

  • Alina Bianca Pop,
  • Cornel Cristian Florian,
  • Cristian Barz,
  • Jozsef Juhasz and ,
  • Aurel Mihail Țîțu and
  • Daniel Danci
  • + 1 author+ 0 author

23 October 2026

High-speed milling of aerospace aluminum alloys requires process strategies that reconcile productivity with functionally acceptable surface integrity. This review critically evaluates Wiper-assisted machining with emphasis on Al7136 by separating tw...

(This article belongs to the Section High-Energy Beam Surface Engineering and Coatings)
  • Article
  • Open Access
921 Views
12 Pages

The aim of this study is to investigate the impact of the rotation speed of ball milling on the CO2 reduction performance of P4O10/TiO2. The rotation speeds studied were 600 rpm, 400 rpm and 200 rpm. It is revealed that the particle size of P4O10 wit...

(This article belongs to the Section Photocatalysis)
  • Article
  • Open Access
1,525 Views
12 Pages

11 February 2025

The rice bran is mixed with broken rice. In traditional horizontal rice mill working, the upper suction-type rice mill, equipped with air duct, is designed to separate rice bran from broken rice. The upper suction-type rice mill working principle, ri...

(This article belongs to the Special Issue Advanced Food Processing Technologies and Approaches)
  • Article
  • Open Access
5 Citations
3,382 Views
11 Pages

9 October 2023

Chickpeas are one of the most widely consumed legumes in the world. Nevertheless, the literature is lacking studies on the effect of drying and milling processes on chickpea flour characteristics, thus motivating this work. The first aim of this work...

(This article belongs to the Section Food Science and Technology)
  • Article
  • Open Access
18 Citations
5,328 Views
13 Pages

Operation Analysis of a SAG Mill under Different Conditions Based on DEM and Breakage Energy Method

  • Qiyue Xie,
  • Caifengyao Zhong,
  • Daifei Liu,
  • Qiang Fu and ,
  • Xiaoli Wang and
  • Zhongli Shen
  • + 1 author+ 0 author

9 October 2020

As one of the machines widely used in mining, a semi-autogenous grinding (SAG) mill can significantly improve the roughing efficiency of rock. But the SAG mill still faces the obstacles of significant energy consumption and empirical operation parame...

(This article belongs to the Section K: State-of-the-Art Energy Related Technologies)
  • Feature Paper
  • Article
  • Open Access
28 Citations
4,381 Views
13 Pages

Triboelectric nanogenerators have attracted extensive attention in energy harvesting due to its light weight, low cost, high flexibility, and diversity of function. However, deterioration in terms of mechanical durability and electrical stability of...

(This article belongs to the Section Energy and Catalysis)
  • Article
  • Open Access
40 Citations
10,694 Views
13 Pages

Effect of Ball Milling Parameters on the Refinement of Tungsten Powder

  • Zaoming Wu,
  • Yanxia Liang,
  • Engang Fu,
  • Jinlong Du and ,
  • Peipei Wang,
  • Yong Fan and
  • Yunbiao Zhao
  • + 2 authors+ 0 author

19 April 2018

The high-energy ball milling method was adopted to explore the influence of ball milling parameters, such as milling speed and additive amounts of process control agent (PCA) on tungsten powder. The morphology and microstructure of tungsten powder in...

(This article belongs to the Special Issue Mechanical Alloying 2018)
  • Article
  • Open Access
10 Citations
3,489 Views
14 Pages

Effect of Ball-Milling Process on Microwave Absorption Behaviors of Flaky Carbonyl Iron Powders

  • Siyuan Yang,
  • Fei Wang,
  • Zhe Zhang,
  • Zhiming Liu and ,
  • Jiliang Zhang and
  • Kaiyong Jiang
  • + 1 author+ 0 author

15 June 2023

Electromagnetic (EM) wave absorption performance is greatly affected by the microscopic morphology of the absorbing material particles. In this study, a facile and efficient ball-milling method was applied to increase the aspect ratio of particles an...

  • Article
  • Open Access
241 Views
39 Pages

8 October 2026

The objective of this study is to clarify the influence of MQL lubricant-delivery directionality on the thermo-mechanical response of Inconel 718 milling by systematically comparing unidirectional and multidirectional lubricant supply configurations...

(This article belongs to the Topic Surface Modification and Durability Enhancement of Advanced Alloys)
  • Article
  • Open Access
3 Citations
2,802 Views
10 Pages

Optimization of Milling Parameters of Unmodified Calotropis Procera Fiber-Reinforced PLA Composite (UCPFRPC)

  • Hassan K. Langat,
  • Fredrick M. Mwema,
  • James N. Keraita,
  • Esther T. Akinlabi and ,
  • Job M. Wambua and
  • Tien-Chien Jen
  • + 1 author+ 0 author

1 October 2021

This study involves the optimization of the milling parameters of unmodified Calotropis Procera fiber-reinforced PLA composite (UCPFRPC). The material is prepared from the combination of 20% Calotropis-Procera and 80% of PLA by weight. The experiment...

(This article belongs to the Special Issue Multidisciplinary Composites)
  • Article
  • Open Access
5 Citations
2,888 Views
18 Pages

An Updated Method for Stability Analysis of Milling Process with Multiple and Distributed Time Delays and Its Application

  • Gang Jin,
  • Wenshuo Li,
  • Jianxin Han,
  • Zhanjie Li and ,
  • Gaofeng Hu and
  • Guangxing Sun
  • + 1 author+ 0 author

5 May 2021

Predicting and avoiding the onset of milling chatter are desirable to reduce its harm to machine tools, workpieces, and cutters. This paper presents an updated method to complete the stability prediction for the milling process with multiple and dist...

(This article belongs to the Section Acoustics and Vibrations)
  • Article
  • Open Access
722 Views
10 Pages

22 April 2026

We report on tool wear and surface roughness for hybrid additive manufacturing of Inconel 718 components. The hybrid additive manufacturing comprises laser powder bed fusion (PBF-LB/M) and an in situ high-speed milling process, i.e., milling is perfo...

(This article belongs to the Special Issue Advances in Additive Manufacturing: Processes, Systems, and Emerging Horizons)
  • Article
  • Open Access
6 Citations
5,433 Views
18 Pages

The Chip Formation Process When Cutting High-Speed Steels and Ti3SiC2 Ceramics

  • Borislav Savkovic,
  • Pavel Kovac,
  • Leposava Sidjanin and
  • Dragan Rajnovic

The paper presents the microstructural characterization of the chip roots in high-speed steels and ceramic Ti3SiC2. The process of chip formation and the obtaining of adequate samples were carried out using the quick-stop method. The tests were carri...

(This article belongs to the Special Issue Advances in Metal Cutting and Cutting Tools)
  • Article
  • Open Access
14 Citations
4,316 Views
14 Pages

Optimal Machining Strategy Selection in Ball-End Milling of Hardened Steels for Injection Molds

  • Irene Buj-Corral,
  • Jose-Antonio Ortiz-Marzo,
  • Lluís Costa-Herrero,
  • Joan Vivancos-Calvet and
  • Carmelo Luis-Pérez

14 March 2019

In the present study, the groups of cutting conditions that minimize surface roughness and its variability are determined, in ball-end milling operations. Design of experiments is used to define experimental tests performed. Semi-cylindrical specimen...

(This article belongs to the Special Issue Advances in Hard-to-Cut Materials: Manufacturing, Properties, Process Mechanics and Evaluation of Surface Integrity)
  • Feature Paper
  • Article
  • Open Access
395 Views
11 Pages

9 June 2026

Compression tests are widely used to characterize cereal kernels, yet the loading rate is often treated as a secondary methodological factor, despite the fact that the ASAE S368.4 procedure recommends a low crosshead speed, whereas industrial size-re...

(This article belongs to the Special Issue Quality of Plant Raw Materials and Their Processing)
  • Article
  • Open Access
5 Citations
2,567 Views
17 Pages

Application of a Method for Measuring the Grindability of Fine-Grained Materials by High-Speed Milling

  • Simona Ravaszová,
  • Karel Dvořák,
  • Danute Vaičiukynienė and
  • Martin Sisol

15 November 2022

This article deals with the development of an alternative method for determining the grindability index of fine-grained materials. This method is inspired by the commercially used VTI method (also known as RTI after the Russian Thermal Energy Institu...

of 20