1,934 Results Found

The accumulation of rare-earth and heavy metal ions from wastewater is important for industrial technology. However, practical accumulators of metal ions are expensive with respect procurement of raw materials, synthesis, and preparation. Therefore,...

Water-soluble soy protein (SP), which contains many acidic amino acids in its structure, was complexed by mixing with a silane coupling agent, 3-glycidoxypropyltrimethoxysilane (GPTMS). These SP−GPTMS composite materials showed stability in wat...

The design and preparation of functional bolaamphiphile-based composite films are of key importance for application in a wide variety of fields. This study demonstrates a new approach to constructing composite films by the Langmuir-Blodgett (LB) meth...

Water pollution caused by the leakage and discharge of pollutants, such as dyes and heavy metal ions, can cause serious damage to the environment and human health. Therefore, it is important to design and develop adsorbent materials that are efficien...

In this work, three kinds of hyperbranched polyamidoamine-palygorskite (PAMAM-Pal) were designed and synthesized by grafting the first generation polyamidoamine (G1.0 PAMAM), G2.0 PAMAM and G3.0 PAMAM onto Pal surfaces, respectively. Then, these PAMA...

Silicon is a worthy substitute anode material for lithium-ion batteries because it offers high theoretical capacity and low working potentials vs. Li⁺/Li. However, immense volume changes and the low intrinsic conductivity of Si hampers its practical...

We present the results of measurements of the ion composition of the plasma generated by an accelerated electron beam in the forevacuum pressure range. It has been found that the main contribution to ionization processes comes from beam electrons. It...

The development of new composite membranes is required to separate chemical species from aggressive environments without using corrective reagents. One such case is represented by the high hydrochloric acid mixture (very low pH and pCl) that contains...

Based on the framework of long-range empirical formulas, the interatomic potentials were constructed for the Ni-Nb-Mo (fcc-bcc-bcc) and Ni-Zr-Mo (fcc-hcp-bcc) ternary metal systems. Applying the constructed potentials, atomistic simulations were perf...

The influences of eight metal ions (i.e., Na⁺, Ca²⁺, Ag⁺, Co²⁺, Cu²⁺, Al³⁺, Zn²⁺, and Mn⁴⁺) on mycelia growth and palmarumycins C₁₂ and C₁₃ production in liquid culture of the endophytic fungus Berkleasmium sp. Dzf12 were investigated. Three metal io...

Water pollution due to heavy metal ions has become a persistent and increasing problem globally. To combat this, carbonaceous materials have been explored as possible adsorbents of these metal ions from solution. The problem with using these material...

For the first time, composites of metal-organic framework MOF-5 and conjugated polymer polyaniline (PANI), (MOF-5/PANI), prepared using PANI in its conducting (emeraldine salt, ES) or nonconducting form (emeraldine base, EB) at various MOF-5 and PANI...

Innovative materials and technologies capable of extraction and recovery of technologically relevant metal ions from various water sources, such as lakes, oceans, ponds, or wastewater reservoirs, are in great demand. Polymer beads are among the most...

As it is used in all aspects of human life, water has become more and more polluted. For the past few decades, researchers and scientists have focused on developing innovative composite adsorbent membranes for water purification. The purpose of this...

Metal hexacyanoferrates are very efficient sorbents for the recovery of alkali and base metal ions (including radionuclides such as Cs). Generally produced by the direct reaction of metal salts with potassium hexacyanoferrate (the precursors), they a...

Methylene blue azo dye (MB) immobilized onto Poly (glycidyl methacrylate-Co-methyl methacrylate), (PGMA-co-PMMA), and sulphonated Poly (glycidyl methacrylate-Co-methyl methacrylate), (SPGMA-co-PMMA), polymers composites have been developed as novel a...

Cell enlargement is essential for the microinjection of various substances into bacterial cells. The cell wall (peptidoglycan) inhibits cell enlargement. Thus, bacterial protoplasts/spheroplasts are used for enlargement because they lack cell wall. T...

With the intensive industrial activity worldwide, water pollution by heavy metal ions (HMIs) has become a serious issue that requires strict and careful monitoring, as they are extremely toxic and can cause serious hazards to the environment and huma...

The development of functional materials from food waste sources and minerals is currently of high importance. In the present work, polylactic acid (PLA)/silica composites were prepared by in situ ring-opening polymerizations of L-lactide onto the sur...

In order to systematize and expand knowledge about copper-containing composite materials as hybrid ion exchangers, in this study, fine metallic copper particles were dispersed within the matrix of a carboxyl cation exchanger (CCE) with a macroporous...

Currently, the requirements for adsorbent materials are based on their environmentally friendly production and biodegradability. However, they are also related to the design of materials to sustain many cycles in pursuit of low cost and profitable de...

Here we report the method of fabrication of supermacroporous monolith sorbents (cryogels) via covalent cross-linking of polyallylamine (PAA) with diglycidyl ether of 1,4-butandiol. Using comparative analysis of the permeability and sorption performan...

Ceramic biocomposites based on bioactive tricalcium phosphate doped with metal ions are a strategy for obtaining good biomimetics for human bone composition. Manufacturing with PMMA porogen also induces bone-like porosity morphology. The poor strengt...

Lithium-ion batteries are a promising technology to promote the phase-out of fossil fuel vehicles. Increasing efforts are focused on improving their energy density and safety by replacing current materials with more efficient and safer alternatives....

Multivalent metal ion (Mg²⁺, Zn²⁺, Ca²⁺, and Al³⁺) batteries (MMIBs) emerged as promising technologies for large-scale energy storage systems in recent years due to the abundant metal reserves in the Earth’s crust and potentially low cost. Howe...

The current study investigated the effects of active material, conductive additives, and binder in a composite electrode on battery performance. In addition, the parameters related to cell performance as well as side reactions were integrated in an e...

Herein, we report the application of a chemometric tool for the optimisation of electrochemical biosensor performances. The experimental design was performed based on the responses of an amperometric biosensor developed for metal ions detection using...

In the present study, a novel sulfur/lithium-ion full battery was assembled while using ternary sulfur/polyacrylonitrile/SiO₂ (S/PAN/SiO₂) composite as the cathode and prelithiated graphite as the anode. For anode, Stabilized Lithium Metal Powder (SL...

Effective and efficient removal of both heavy metal pollutants and bacterial contamination from fresh water is an open issue, especially in developing countries. In this work, a novel eco-friendly functional composite for water treatment application...

This paper describes a strategy for preparing free-standing reduced graphene oxide@Si nanoparticles (rGO@Si NPs) composite membranes. Graphene oxide (GO) was reduced and self-assembled synchronously with nanoparticles of silicon (Si NPs) on a metal s...

Gellan gum is one of the water-soluble anionic polysaccharides produced by the bacteria Sphingomonas elodea. In this study, we prepared gellan gum-inorganic composite films by mixing the gellan gum and a silane coupling reagent—3-glycidoxypropy...

Artificial nanomembranes may be defined as synthetic freestanding structures with a thickness below 100 nm and a very large aspect ratio, of at least a few orders of magnitude. Being quasi-2D, they exhibit a host of unusual properties useful for vari...

As a novel organic–inorganic hybrid porous crystalline material, metal–organic frameworks (MOFs) are ideal sensitive materials for detecting gases, antibiotics, and ions, owing to their ultra-high specific surface area, tunable pore struc...

Novel two-dimensional (2D) membranes have been utilized in water purification or seawater desalination due to their highly designable structure. However, they usually suffer from swelling problems when immersed in solution, which limits their further...

Weak polyelectrolyte chains are versatile polymeric materials due to the large number of functional groups that can be used in different environmental applications. Herein, one weak polycation (polyethyleneimine, PEI) and two polyanions (poly(acrylic...

In this study, graphene Th(IV) phosphate was prepared by sol–gel precipitation method. The ion-exchange behavior of this cation-exchanger was studied by investigating properties like ion-exchange capacity for various metal ions, the effect of eluent...

A nano-form composite of MXenes (Ti₃C₂T_x, T_x = -O, -OH, -F) was synthesized through depositing bismuth-nanoparticle (BiNPs) onto Ti₃C₂T_x sheets. Because of the preventive effect of the two-dimensional layered structure of Ti₃C₂T_x, the nanoparticles o...

Heavy metal toxicity in water is a serious problem that may have harmful effects on human health and the ecosystem. Lead [Pb(II)] and cadmium [Cd(II)] are two such heavy metal ions, present in water, whose severity is well-known and well-studied. In...

Heavy metal ions (HMIs) threaten ecosystems and human health due to their carcinogenicity, bioaccumulativity, and persistence, demanding highly sensitive, low-cost real-time detection. Electrochemical sensing technology has gained significant attenti...

Materials coming from renewable resources have drawn recently an increased attention in various applications as an eco-friendly alternative in the synthesis of novel functional materials. Polysaccharides, with their prominent representative – c...

Pharmaceuticals and heavy metals pose significant risks to human health and aquatic ecosystems, necessitating their removal from water and wastewater. A promising alternative for this purpose involves their removal by adsorption on composite sorbents...

Silicon carbide (SiC) and silicon nanoparticle-decorated carbon (Si/C) materials are electrodes that can potentially be used in various rechargeable batteries, owing to their inimitable merits, including non-flammability, stability, eco-friendly natu...

Amplex Red is a widely used fluorogenic probe for hydrogen peroxide (H₂O₂) detection. In the presence of horseradish peroxidase (HRP), it reacts with H₂O₂ to form fluorescent resorufin. However, during high-voltage electric pulse treatment, fluoresce...

Transforming biological waste into high-value-added materials is currently attracting extensive research interest in the medical and industrial treatment fields. The design and use of new antibacterial systems are urgently needed. In this study, we u...

Quantum dots nanomaterials have attracted extensive interest for fluorescence chemical sensors due their attributes, such as excellent optical characteristics, quantum size effects, interface effects, etc. Moreover, the fluorescence properties of qua...

In order to avoid the secondary pollution of the toxic residue of chemical crosslinking agent accompanied by chemical hydrogel adsorbent and enhance the adsorption performance of physical hydrogel, chitosan/calcium alginate/bentonite (CTS/CA/BT) comp...

Chitosan has several shortcomings that limit its practical application for the adsorption of heavy metals: mechanical instability, a challenging separation and recovery process, and low equilibrium capacity. This study describes the synthesis of a ma...

With the rapid intensification of industrial and agricultural activities, water contamination by heavy metal ions has emerged as a critical global challenge, gravely imperiling ecosystem stability and public health. Among the various remediation tech...

An ionic polymer-metal composite (IPMC) actuator composed of a thin perfluorinated ionomer membrane with electrodes plated on both surfaces undergoes a large bending motion when a low electric field is applied across its thickness. Such actuators are...

Over the years, a large number of sorption experiments using the aminopolycarboxylic acid (APCA)-functionalized adsorbents were carried out in batch conditions, but prospective research should also be directed towards column studies to check their in...