Skip to Content

757 Results Found

  • Article
  • Open Access
1,032 Views
14 Pages

Research on the Interlayer Bonding and Temperature Control Optimization of Asphalt Concrete Core Wall

  • Ziyang Luo,
  • Wu Yang,
  • Deqiang Han,
  • Deyou Pan and ,
  • Lei Yu and
  • Tingpeng Guo
  • + 1 author+ 0 author

10 May 2025

In this paper, the mechanism of interlayer bonding under a low-temperature environment is systematically revealed in terms of the temperature control difficulties in the continuous multilayer construction of an asphalt concrete core wall in winter. A...

  • Article
  • Open Access
53 Citations
5,109 Views
16 Pages

18 December 2020

WAAM (wire and arc additive manufacturing) is becoming an increasingly popular method to produce components from metals, which are usually not so suitable for conventional production methods. One of the good examples is duplex stainless steels (DSSs)...

(This article belongs to the Special Issue Development of Mechanical, Corrosion Resistance, and Antibacterial Properties of Steels)
  • Article
  • Open Access
393 Views
25 Pages

7 July 2026

This study presents an analytical model for the long-term bending behavior of simply supported laminated glass (LG) plates with temperature-dependent viscoelastic interlayers. The glass layers are described based on three-dimensional elasticity theor...

(This article belongs to the Special Issue Modeling and Mechanical Analysis of Materials and Structures in Civil Engineering)
  • Article
  • Open Access
38 Citations
5,272 Views
17 Pages

29 April 2022

Significant efforts have been spent determining or monitoring interlayer temperatures (IT) to increase quality in Wire Arc Additive Manufacturing (WAAM). However, an uneven thermal profile in the wall and a temperature gradient along the layer length...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
3 Citations
2,674 Views
13 Pages

Domain wall mobility as a function of nonmagnetic interlayer thickness and temperature was studied in ultrathin exchange-coupled ferromagnetic layers using magneto-optic Kerr microscopy. The system under study is a Pt/Co/Pt/Co/Pt heterostructure havi...

(This article belongs to the Section Magnetic Materials)
  • Article
  • Open Access
9 Citations
2,888 Views
12 Pages

Low Temperature Transient Liquid Phase Bonding of Alumina Ceramics with the Bi2O3-ZnO Interlayer

  • Maria Stosz,
  • Sathya Narayanasamy,
  • Thomas Graule,
  • Dariusz Kata and
  • Gurdial Blugan

6 October 2022

Alumina ceramics were joined by a transient liquid phase (TLP) bonding method at relatively lower temperatures, using mixed powders of Bi2O3 and ZnO with different weight ratios as interlayers between the ceramic components. Bonding was achieved at 7...

(This article belongs to the Section Materials Chemistry)
  • Article
  • Open Access
3 Citations
2,073 Views
22 Pages

Effect of Interlayer Temperature-Controlled Thermal Cycling on the Microstructure and Mechanical Properties of Wire Arc Directed Energy Deposition H13 Steel

  • Chuang Li,
  • Hawke Suen,
  • Yajin Yang,
  • Liang Zhang and ,
  • Qiuxia Chen,
  • Tianlong Gao,
  • Bo Yuan,
  • Lyusha Cheng and
  • Zhe Lv
  • + 4 authors+ 0 author

29 December 2025

Wire arc directed energy deposition (WA-DED) is a cost-effective technique for fabricating large metallic components. However, the inherent layer-by-layer deposition process leads to substantial heat accumulation, which significantly influences the r...

(This article belongs to the Special Issue The Additive Manufacturing of Metallic Alloys (Second Edition))
  • Article
  • Open Access
11 Citations
2,882 Views
14 Pages

3 November 2024

Controlled interlayer temperature has a profound impact on both the microstructure and mechanical properties of the deposited components. In this study, thin-walled structures made of high-strength low-alloy steel were fabricated using the submerged-...

(This article belongs to the Special Issue Microstructure Engineering of Metals and Alloys, 3rd Edition)
  • Article
  • Open Access
8 Citations
3,590 Views
12 Pages

13 March 2022

To explore the influence of annealing temperatures on the interfacial structure and peeling strength of Cu/Al clad sheets with a 304 stainless steel foil interlayer, an intermediate annealing treatment was performed at temperatures of 450 °C, 550...

(This article belongs to the Special Issue Advances in High-Performance Non-ferrous Materials)
  • Review
  • Open Access
35 Citations
8,285 Views
34 Pages

Additive manufacturing technologies are being increasingly adopted in the manufacturing industries due to their capabilities in producing complex geometries without the need for special tools. Material extrusion (MEX-TRB/P) is a popular additive manu...

(This article belongs to the Special Issue Design, Processes and Materials for Additive Manufacturing: 2nd Edition)
  • Article
  • Open Access
6 Citations
2,036 Views
15 Pages

Effect of Interlayer Bonding Temperature on the Bending Properties of Asphalt Concrete Core Wall

  • Qunzhu Han,
  • Haoyu Dong,
  • Yingbo Zhang,
  • Taotao Gao and ,
  • Ge Song and
  • Shanwang Wang
  • + 1 author+ 0 author

1 June 2023

In the construction process of an asphalt concrete impermeable core wall, the interlayer bonding of the core wall is the weak link of the core wall structure and also the focus of construction, so it is important to carry out research on the influenc...

(This article belongs to the Special Issue Asphalt Mixtures and Pavements Design)
  • Article
  • Open Access
3 Citations
6,097 Views
8 Pages

Twist Angle-Dependent Interlayer Exciton in MoS2 Bilayers Revealed by Room-Temperature Reflectance

  • Lei Xiong,
  • Tianhong Tang,
  • Xiaoyue Fan,
  • Haiyang Liu and ,
  • Peng Zhu,
  • Xiaolan Zhang,
  • Wei Qiao,
  • Qinsheng Wang,
  • Zhiwei Wang and
  • Gang Wang
  • + 6 authors+ 1 author

25 May 2022

In 2H stacking bilayer MoS2, the exciton with an interlayer nature has been evidenced due to the hybridization of hole states among both layers. The transition energy of this interlayer exciton is located between the A and B excitons. In this work, w...

(This article belongs to the Section Inorganic Crystalline Materials)
  • Article
  • Open Access
1 Citations
2,976 Views
8 Pages

Ti Interlayer Mediated Uniform NiGe Formation under Low-Temperature Microwave Annealing

  • Jun Yang,
  • Yunxia Ping,
  • Wei Liu,
  • Wenjie Yu and ,
  • Zhongying Xue,
  • Xing Wei,
  • Aimin Wu and
  • Bo Zhang
  • + 3 authors+ 0 author

15 March 2021

The reactions between nickel and germanium are investigated by the incorporation of a titanium interlayer on germanium (100) substrate. Under microwave annealing (MWA), the nickel germanide layers are formed from 150 °C to 350 °C for 360 s in ambient...

(This article belongs to the Special Issue Advances in Processing and Mechanical Behavior in Lightweight Metals and Alloys)
  • Article
  • Open Access
13 Citations
3,888 Views
28 Pages

14 June 2022

One of today’s most-used glass products is a composite made of at least two glass panels connected with a soft polymeric interlayer—laminated glass. The mechanical properties of such elements are influenced by interlayer properties and th...

(This article belongs to the Special Issue Hybrid Organic-Inorganic Materials Used to Improve the Environment and Human Health)
  • Article
  • Open Access
14 Citations
6,036 Views
19 Pages

11 October 2021

In this paper, based on Simufact Welding finite element analysis software, a numerical simulation of the temperature and residual stress distribution of the weldolet-header multi-layer multi-pass welding process is carried out, and the simulation res...

  • Article
  • Open Access
14 Citations
2,523 Views
14 Pages

22 August 2023

Due to their exceptional all-around performance, steel/aluminum-alloy composite plates have been frequently utilized in many different industries. However, when steel/aluminum-alloy composite plates are prepared by the rolling process, they will scar...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
19 Citations
6,204 Views
14 Pages

In this study, Ti–6Al–4V alloy was diffusion bonded to super-duplex stainless steel (SDSS) using an electrodeposited Cu interlayer containing alumina nanoparticles to determine the effects of bonding parameters on the microstructural evol...

  • Article
  • Open Access
1 Citations
554 Views
12 Pages

18 March 2026

During multi-layer commingled production of coalbed methane (CBM), fluid interference induced by interlayer pressure differences is a major constraint on productivity, representing a dynamic coupling process of reservoir pressure, temperature, and de...

(This article belongs to the Section Environmental and Green Processes)
  • Article
  • Open Access
14 Citations
3,455 Views
18 Pages

High-Temperature Mechanical and Tribological Performance of W-DLC Coating with Cr interlayer on X40CrMoV5-1 Hot Work Tool Steel

  • Mária Hagarová,
  • Gabriela Baranová,
  • Mária Heželová,
  • Martin Truchlý and ,
  • Marek Vojtko,
  • Ondrej Petruš and
  • Dávid Csík
  • + 2 authors+ 0 author

2 August 2024

Diamond-like carbon (DLC) coatings enhance tool wear resistance across various temperatures. The sp3/sp2 bond ratio within DLC significantly impacts its properties and thermal stability. Elevated temperatures can alter DLC’s structure, while me...

(This article belongs to the Special Issue Oxidation, Wear, Corrosion Behaviors and Activated Bonding Properties of Coatings Deposited on Metals)
  • Article
  • Open Access
6 Citations
8,182 Views
22 Pages

18 October 2022

Most used laminated glass is composed of float glass plies bonded together with a viscoelastic Polyvinyl Butyral (PVB) interlayer. The shear stiffness of the polymeric interlayer is the key factor in the behavior of laminated glass. Structural engine...

(This article belongs to the Section Polymer Analysis and Characterization)
  • Article
  • Open Access
29 Citations
7,978 Views
23 Pages

Influence of Ambient Temperature and Crystalline Structure on Fracture Toughness and Production of Thermoplastic by Enclosure FDM 3D Printer

  • Supaphorn Thumsorn,
  • Wattanachai Prasong,
  • Akira Ishigami,
  • Takashi Kurose and ,
  • Yutaka Kobayashi and
  • Hiroshi Ito
  • + 1 author+ 0 author

Fused deposition modeling (FDM) 3D printing has printed thermoplastic materials layer-by-layer to form three dimensional products whereby interlayer adhesion must be well controlled to obtain high mechanical performance and product integrity. This re...

(This article belongs to the Special Issue Recent Advances in Processes and Design Methods for Additive Manufacturing)
  • Article
  • Open Access
9 Citations
3,250 Views
20 Pages

Evolution Mechanism of Interlayer Properties of CRTS III Slab Track during Construction

  • Ji Wang,
  • Liang Gao,
  • Ludong Wang,
  • Wenqiang Zhao and ,
  • Ying Qin,
  • Chen Hua and
  • Yuanwei Li
  • + 2 authors+ 0 author

14 January 2024

The interlayer properties of the CRTS III slab track during construction directly affect its long-term service condition. This article introduces time-varying coefficients that characterize the early properties of the interface between track slab and...

(This article belongs to the Special Issue Structural Mechanics in Materials and Construction)
  • Article
  • Open Access
13 Citations
7,078 Views
9 Pages

Temperature-Dependent Ferroelectric Behaviors of AlScN-Based Ferroelectric Capacitors with a Thin HfO2 Interlayer for Improved Endurance and Leakage Current

  • Hyeong Jun Joo,
  • Si Sung Yoon,
  • Seung Yoon Oh,
  • Yoojin Lim and ,
  • Gyu Hyung Lee and
  • Geonwook Yoo
  • + 1 author+ 0 author

18 November 2024

The ferroelectric switching behavior of a metal–ferroelectric AlScN–HfO2 interlayer–metal (MFIM) capacitor was investigated at variable temperatures and compared with an MFM capacitor. Although the MFIM capacitor demonstrated an inf...

  • Article
  • Open Access
204 Views
18 Pages

8 October 2026

Reliable joining of titanium–zirconium–molybdenum (TZM) alloy to graphite is difficult because of poor graphite wettability and the dissimilar metal/nonmetal interface. This study investigates a narrow brazing-temperature range of 1540&nd...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
6 Citations
1,794 Views
12 Pages

High-Temperature Fatigue Degradation Behaviors of a 3D Braided C/SiC with a Thin Interlayer in Different Dry Oxygen Atmospheres

  • Lexin Yang,
  • Dianwei He,
  • Chen Hu,
  • Zhenhuan Gao and ,
  • Liping Nie,
  • Youbei Sun,
  • Lei Zhang and
  • Xingang Luan
  • + 3 authors+ 0 author

9 October 2024

In order to evaluate the increase in the flexural strength of a 3D braided C/SiC composite comprised with a thin pyrolytic carbon (PyC) interlayer (TI C/SiC) under a load of 60 MPa with an amplitude of ±20 MPa at an oxygen partial pressure of...

(This article belongs to the Section Materials Physics)
  • Article
  • Open Access
4 Citations
2,228 Views
11 Pages

29 February 2024

Ti-45Al-8Nb alloy is widely utilized in the lightweight design of the aerospace field because of its excellent properties. In order to make full use of this alloy, it is important to carry out relevant research, such as into the joining process of Ti...

(This article belongs to the Special Issue Manufacturing and Surface Engineering IV)
  • Article
  • Open Access
252 Views
18 Pages

Modeling of the Thermal Conditions of Interlayer Bonding During FDM Printing of ABS Plastic

  • Almat Sagitov,
  • Karibek Sherov,
  • Dinara Kossatbekova,
  • Ainur Turusbekova and ,
  • Javokhir Toshov,
  • Saule Mendaliyeva,
  • Medgat Mussayev,
  • Saule Ainabekova,
  • Gulziya Sherova and
  • Bauyrzhan Zhumagaliyev
  • + 5 authors+ 0 author

16 October 2026

This study investigates the effect of extrusion temperature and print layer thickness on the thermal conditions for interlayer bond formation during FDM printing of ABS plastic. Computer simulations were performed using SOLIDWORKS 2024® with tran...

(This article belongs to the Section Composites Modelling and Characterization)
  • Article
  • Open Access
2 Citations
1,360 Views
17 Pages

8 May 2026

The application of carbon-fiber-based geogrids in asphalt pavements is still in the nascent phase of research in China. Compared with glass fiber, carbon fiber undergoes processes such as electrochemical surface oxidation and coating with a sizing ag...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
2 Citations
2,360 Views
23 Pages

Inverse Thermal Process Design for Interlayer Temperature Control in Wire-Directed Energy Deposition Using Physics-Informed Neural Networks

  • Fuad Hasan,
  • Abderrachid Hamrani,
  • Tyler Dolmetsch,
  • Somnath Somadder and ,
  • Md Munim Rayhan,
  • Arvind Agarwal and
  • Dwayne McDaniel
  • + 2 authors+ 0 author

Wire-directed energy deposition (W-DED) produces steep thermal gradients and rapid heating-cooling cycles due to the moving heat source, where modest variations in process parameters significantly alter heat input per unit length and therefore the fu...

  • Article
  • Open Access
35 Citations
6,074 Views
22 Pages

Monotonic and Fatigue Properties of Steel Material Manufactured by Wire Arc Additive Manufacturing

  • Michael Wächter,
  • Marcel Leicher,
  • Moritz Hupka,
  • Chris Leistner and ,
  • Lukas Masendorf,
  • Kai Treutler,
  • Swenja Kamper,
  • Alfons Esderts,
  • Volker Wesling and
  • Stefan Hartmann
  • + 5 authors+ 0 author

29 July 2020

In this study, the monotonic and cyclic material properties of steel material of medium static strength produced additively in the wire arc additive manufacturing (WAAM) process were investigated. This investigated material is expected to be particul...

(This article belongs to the Special Issue Progress in 3D Printing of Materials)
  • Article
  • Open Access
2 Citations
1,403 Views
21 Pages

15 February 2025

Mine slope landslides can lead to significant geological disasters. To investigate the impact of temperature cycling on the internal mechanisms that trigger these disasters in weak interlayers with varying moisture contents, a THMC-B multi-field coup...

(This article belongs to the Special Issue Geotechnic and Geostructure Modelling for Landslides: Prediction and Control)
  • Article
  • Open Access
15 Citations
3,037 Views
15 Pages

The Effect of Ni Interlayer on the Hot-Rolled and Quenched Stainless Steel Clad Plate

  • Zengmeng Lin,
  • Shuai Wang,
  • Jun He,
  • Baoxi Liu and ,
  • Cuixin Chen,
  • Jianhang Feng,
  • Xin Zhang,
  • Wei Fang and
  • Fuxing Yin
  • + 4 authors+ 0 author

30 November 2020

The vacuum hot-rolled SUS314/Q235 stainless steel clad plate has many drawbacks including serious interface alloy element diffusion, stainless steel cladding’s sensitization, and carbon steel substrate’s low strength. In this study, the c...

  • Article
  • Open Access
1,967 Views
23 Pages

3 November 2025

Underground pumped hydro storage (UPHS) in solution-mined salt caverns offers a promising approach to address the intermittency of renewable energy in flat geological regions such as Southern Ontario, Canada. This work presents the first fully couple...

  • Article
  • Open Access
10 Citations
4,003 Views
18 Pages

A Combination of Keyhole GTAW with a Trapezoidal Interlayer: A New Insight into Armour Steel Welding

  • Zhenyu Fei,
  • Zengxi Pan,
  • Dominic Cuiuri,
  • Huijun Li and
  • Azdiar A. Gazder

31 October 2019

The ballistic performance of armour steel welds using austenitic filler materials is poor on account of the disparity in the mechanical properties of the weld and base metals. Consequently, a novel Keyhole Gas Tungsten Arc Welding process with a trap...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
4 Citations
4,262 Views
12 Pages

LT-AlSb Interlayer as a Filter of Threading Dislocations in GaSb Grown on (001) GaAs Substrate Using MBE

  • Agata Jasik,
  • Jacek Ratajczak,
  • Iwona Sankowska,
  • Andrzej Wawro and ,
  • Dariusz Smoczyński and
  • Krzysztof Czuba
  • + 1 author+ 0 author

28 November 2019

We report on the role of AlSb material in the reduction of threading dislocation density (TDD) in the GaSb/AlSb/GaAs system. The AlSb layers were grown using low-temperature (LT) MBE, exploiting the interfacial misfit (IMF) dislocation array. AlSb la...

(This article belongs to the Special Issue Dislocations in Heterostructures)
  • Article
  • Open Access
12 Citations
3,255 Views
13 Pages

Influence of Copper Interlayers on the Magnetic Pulse Welding Process between Aluminum and Steel

  • Joerg Bellmann,
  • Kristina Roder,
  • Martina Zimmermann,
  • Eckhard Beyer and ,
  • Lothar Kroll and
  • Daisy Nestler
  • + 1 author+ 0 author

26 May 2021

Magnetic pulse welding (MPW) is a promising joining technology for the large-scale production of dissimilar metallic joints. Although the heat input is comparatively low, the temporary occurrence of high temperatures in the joining gap was found to p...

(This article belongs to the Special Issue High Power Pulsed Processes for Welding and Forming of Metallic Materials)
  • Article
  • Open Access
12 Citations
3,685 Views
13 Pages

19 January 2020

Asphalt mixtures used in stress absorbing membrane interlayers (SAMIs) play a significant role in improving the performance of asphalt pavement. To investigate the rheological properties and phase transition characteristics of asphalt mixtures used i...

(This article belongs to the Special Issue Sustainable Designed Pavement Materials)
  • Article
  • Open Access
6 Citations
5,719 Views
8 Pages

Bendable Single Crystal Silicon Nanomembrane Thin Film Transistors with Improved Low-Temperature Processed Metal/n-Si Ohmic Contact by Inserting TiO2 Interlayer

  • Jiaqi Zhang,
  • Yi Zhang,
  • Dazheng Chen,
  • Weidong Zhu and ,
  • He Xi,
  • Jincheng Zhang,
  • Chunfu Zhang and
  • Yue Hao
  • + 3 authors+ 0 author

16 December 2018

Bendable single crystal silicon nanomembrane thin film transistors (SiNMs TFTs), employing a simple method which can improve the metal/n-Silicon (Si) contact characteristics by inserting the titanium dioxide (TiO2) interlayer deposited by atomic laye...

(This article belongs to the Special Issue Silicon-Based Nanomaterials: Technology and Applications)
  • Article
  • Open Access
17 Citations
3,350 Views
16 Pages

Wire and arc additive manufacturing (WAAM) stands out from other deposition techniques for being able to produce bigger parts and with higher deposition rates. However, due to the high thermal input, it is necessary to carefully select the deposition...

  • Article
  • Open Access
1 Citations
320 Views
25 Pages

11 September 2026

To address the challenge of quantitatively identifying thermal-resistance contributions from multi-layer packaging structures within liquid-cooled insulated-gate bipolar transistor (IGBT) modules, this study establishes a three-dimensional conjugate...

(This article belongs to the Section Energy Science and Technology)
  • Article
  • Open Access
8 Citations
3,887 Views
22 Pages

Dynamic Dwell Time Adjustment in Wire Arc-Directed Energy Deposition: A Thermal Feedback Control Approach

  • Md Munim Rayhan,
  • Abderrachid Hamrani,
  • Fuad Hasan,
  • Tyler Dolmetsch and ,
  • Arvind Agarwal and
  • Dwayne McDaniel
  • + 1 author+ 0 author

Precise thermal management remains a critical challenge in Wire Arc-Direct Energy Deposition (W-DED) processes due to significant temperature fluctuations that can adversely impact part quality, dimensional accuracy, and process reliability. To addre...

(This article belongs to the Special Issue Advances in Directed Energy Deposition Additive Manufacturing)
  • Article
  • Open Access
12 Citations
4,409 Views
15 Pages

Cu-Ag Nanocomposite Pastes for Low Temperature Bonding and Flexible Interlayer-Interconnections

  • Yin-Chi Lu,
  • Wei-Hsun Liao,
  • Ting-Jui Wu,
  • Kiyokazu Yasuda and
  • Jenn-Ming Song

29 November 2022

Cu-Ag composite pastes consisting of carboxylate-capped Ag nanoparticles, spray-pyrolyzed Ag submicron particles, and copper formate were developed in this study for low-temperature low-pressure bonding. The joints between the Cu, Ni/Au, and Ag finis...

(This article belongs to the Section Nanocomposite Materials)
  • Article
  • Open Access
229 Views
21 Pages

14 September 2026

The laminated structure in shale rock plays a crucial role in fluid migration during shale gas exploitation. This study investigated the evolution patterns and mechanisms of shale permeability under the influence of laminae through multiple permeabil...

(This article belongs to the Special Issue Geotechnical Engineering: Principles and Applications, 2nd Edition)
  • Article
  • Open Access
10 Citations
4,567 Views
15 Pages

13 October 2021

When the direct tensile test is adopted to determine the interlayer tensile strength of the asphalt pavements, specimen separation or internal cracking often occurs at the bonding area of the loading head, rather than at the interlaminar bonding inte...

(This article belongs to the Special Issue Long-Life and Circular Pavement Materials)
  • Article
  • Open Access
7 Citations
3,328 Views
14 Pages

12 July 2022

In this paper, spark plasma diffusion bonding technology was employed to join TiAl and Ti2AlNb with high temperature titanium alloy interlayer at 950 °C/10kN/60 min, then following furnace cooling at cooling rate up to 100 °C/min. After weldi...

(This article belongs to the Special Issue Commemorating the Launch of the Section 'Metals and Alloys')
  • Article
  • Open Access
2 Citations
2,952 Views
12 Pages

24 October 2019

This paper presents the result of the brazed Iron-chromium-aluminum alloy (Fecralloy) with nickel filler metal (MBF20). The heat plates with the machined 2 mm diameter channels were brazed using 60 μm thick MBF20. In the experiment, the brazing bo...

  • Article
  • Open Access
10 Citations
4,233 Views
22 Pages

28 January 2022

It is well known that welding dissimilar metals can play the advantages and characteristics of those different metals, but it is easy to encounter some problems. In this paper, the thermomechanical behavior of the weldolet–branch dissimilar ste...

  • Article
  • Open Access
26 Citations
3,281 Views
13 Pages

15 October 2022

Several process variables can be taken into account to optimize the fused filament fabrication (FFF) process, a promising additive manufacturing technique. To take into account the most important variables, a numerical-experimental roadmap toward the...

  • Correction
  • Open Access
539 Views
2 Pages

29 May 2026

In the original publication [...]

  • Article
  • Open Access
16 Citations
5,546 Views
15 Pages

Underlying Methodology for a Thermal Process Monitoring System for Wire and Arc Additive Manufacturing

  • Daniel Baier,
  • Tobias Weckenmann,
  • Franz Wolf,
  • Andreas Wimmer and
  • Michael F. Zaeh

The Wire and Arc Additive Manufacturing (WAAM) process has a high potential for industrial applications in aviation. The interlayer temperatures influence the dimensions and geometric deviations of the part. Monitoring the absolute interlayer tempera...

(This article belongs to the Topic Additive Manufacturing: Design, Opportunities, and Applications)

of 16