Skip to Content
You are currently on the new version of our website. Access the old version .

55 Results Found

  • Article
  • Open Access
5 Citations
2,628 Views
20 Pages

27 May 2023

In this study, the bonding of a CuW/Al composite with a Ni interlayer was designed and established by vacuum hot-pressing diffusion bonding. The interfacial microstructure was systematically discussed based on experimental characterization and first-...

  • Article
  • Open Access
5 Citations
2,039 Views
15 Pages

Microstructure Evolution and Mechanical Properties of Wire Arc Additively Manufactured DSS2209 Duplex Stainless Steel

  • Jian Sun,
  • Liang Liu,
  • Long Zhang,
  • Jun Hong and ,
  • Feihong Liu,
  • Dongsheng Wang,
  • Fei Zhou and
  • Youwen Yang
  • + 3 authors+ 0 author

30 August 2025

This study investigates the microstructure evolution and mechanical properties of DSS2209 duplex stainless steel fabricated via cold metal transfer wire arc additive manufacturing (CMT-WAAM). The as-deposited thin-wall components exhibit significant...

(This article belongs to the Special Issue Microstructure Engineering of Metals and Alloys, 3rd Edition)
  • Article
  • Open Access
12 Citations
3,063 Views
14 Pages

3 November 2022

Narrow gap laser welding (NGLW) is a common solution for the welding of thick structures. NGLW was carried out on narrow-gap butt joints of 40 mm-thick Ti-6Al-4V alloy plates with a U-shaped groove. The distribution characteristics of the interlamina...

(This article belongs to the Special Issue Welding and Processing in Alloy Manufacturing)
  • Article
  • Open Access
17 Citations
3,584 Views
14 Pages

12 November 2019

Ultrasound-assisted transient liquid phase bonding (U-TLP) has been regarded as a promising brazing process to join magnesium alloys with a Sn and Zn interlayer; however, the formation of brittle magnesium intermetallic compounds (Mg2Sn, MgZn, and Mg...

  • Article
  • Open Access
3 Citations
2,065 Views
22 Pages

Effect of Interlayer Temperature-Controlled Thermal Cycling on the Microstructure and Mechanical Properties of Wire Arc Directed Energy Deposition H13 Steel

  • Chuang Li,
  • Hawke Suen,
  • Yajin Yang,
  • Liang Zhang and ,
  • Qiuxia Chen,
  • Tianlong Gao,
  • Bo Yuan,
  • Lyusha Cheng and
  • Zhe Lv
  • + 4 authors+ 0 author

29 December 2025

Wire arc directed energy deposition (WA-DED) is a cost-effective technique for fabricating large metallic components. However, the inherent layer-by-layer deposition process leads to substantial heat accumulation, which significantly influences the r...

(This article belongs to the Special Issue The Additive Manufacturing of Metallic Alloys (Second Edition))
  • Article
  • Open Access
460 Views
31 Pages

Modification of Surface and Subsurface Properties of Additively Manufactured Inconel 718 Components Through Post-Process and Interlayer Machine Hammer Peening

  • Mohammad Dadgar,
  • Martina Müller,
  • Max Meerkamp,
  • Tim Herrig and ,
  • Stefan Gräfe and
  • Thomas Bergs
  • + 1 author+ 0 author

7 August 2026

Additive manufacturing (AM) enables rapid, near-net-shape fabrication with high material efficiency, but the resulting components often exhibit surface roughness, microstructural heterogeneity, and tensile residual stresses that reduce their performa...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
12 Citations
3,563 Views
13 Pages

Effect of Varying Layer Thickness by Interlayer Machining on Microstructure and Mechanical Properties in Wire Arc Additive Manufacturing

  • G. Ganesan,
  • Neel Kamal Gupta,
  • S. Siddhartha,
  • Shahu R. Karade and ,
  • Henning Zeidler,
  • K. Narasimhan and
  • K. P. Karunakaran
  • + 2 authors+ 0 author

This study investigates the influence of varying layer thickness through interlayer machining in Wire Arc Additive Manufacturing (WAAM) and its impact on microstructural evolution, mechanical properties, and residual stress distribution. It compares...

(This article belongs to the Special Issue Design, Processes and Materials for Additive Manufacturing: 2nd Edition)
  • Review
  • Open Access
38 Citations
8,864 Views
22 Pages

28 January 2021

The multilayer coextrusion process is known to be a reliable technique for the continuous fabrication of high-performance micro-/nanolayered polymeric products. Using laminar flow conditions to combine polymer pairs, one can produce multilayer films...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
9 Citations
6,855 Views
9 Pages

Plastic Deformation Induced by Nanoindentation Test Applied on ZrN/Si3N4 Multilayer Coatings

  • Zhengtao Wu,
  • Xing Zhong,
  • Cihai Liu,
  • Zhoucheng Wang and ,
  • Wei Dai and
  • Qimin Wang
  • + 1 author+ 0 author

27 December 2017

ZrN/Si3N4 multilayer coating that alternates with either nanocrystalline ZrN or amorphous Si3N4 interlayers was fabricated by reactively magnetron sputtering in an Ar-N2 mixture atmosphere. The thicknesses of the nanocrystalline ZrN and the amorphous...

(This article belongs to the Special Issue Hybrid Surface Coatings & Process (Selected Papers from HyMaP 2017))
  • Article
  • Open Access
19 Citations
6,202 Views
14 Pages

In this study, Ti–6Al–4V alloy was diffusion bonded to super-duplex stainless steel (SDSS) using an electrodeposited Cu interlayer containing alumina nanoparticles to determine the effects of bonding parameters on the microstructural evol...

  • Article
  • Open Access
18 Citations
5,272 Views
9 Pages

Surface Morphology and Microstructure Evolution of Single Crystal Diamond during Different Homoepitaxial Growth Stages

  • Guoqing Shao,
  • Juan Wang,
  • Shumiao Zhang,
  • Yanfeng Wang and ,
  • Wei Wang and
  • Hong-Xing Wang
  • + 1 author+ 0 author

11 October 2021

Homoepitaxial growth of step-flow single crystal diamond was performed by microwave plasma chemical vapor deposition system on high-pressure high-temperature diamond substrate. A coarse surface morphology with isolated particles was firstly deposited...

(This article belongs to the Special Issue Diamond Material and Its Applications)
  • Article
  • Open Access
1 Citations
1,079 Views
19 Pages

Friction stir-welding (FSW) is widely recognized as a modern solid-state technology used to join dissimilar materials by solid-state mechanical mixing. Such mechanical mixing can be exploited to fabricate in situ composite structures through solid-st...

(This article belongs to the Special Issue Advanced Welding Processes, Additive Manufacturing and Numerical Models: 2nd Edition)
  • Article
  • Open Access
534 Views
31 Pages

12 June 2026

Freeze–thaw durability of 3D-printed engineered cementitious composites (3DP-ECC) is strongly affected by print-induced interlayer defects and anisotropy, particularly in cold regions. This study investigated Cast-ECC and Z-direction 3DP-ECC in...

(This article belongs to the Special Issue Intelligent Construction in Civil Engineering: Additive Manufacturing of Cementitious Materials and Concrete)
  • Article
  • Open Access
7 Citations
3,495 Views
12 Pages

7 September 2018

Magnesium/aluminium clad bars were fabricated by compound casting and multi-pass warm caliber rolling. A Ni interlayer prepared using a plasma spraying process was inserted between the parent metals to improve the interfacial characteristics during t...

  • Article
  • Open Access
361 Views
26 Pages

17 September 2026

Multi-laser powder bed fusion (PBF-ML) enables efficient fabrication of large components but introduces spatially heterogeneous thermal histories near inter-laser overlap zones. However, how global thermal-input variables and local thermal-path varia...

(This article belongs to the Special Issue Advanced Machining Processes for Metals and Ceramics)
  • Article
  • Open Access
36 Citations
4,453 Views
17 Pages

The Determining Role of Nb Interlayer on Interfacial Microstructure and Mechanical Properties of Ti/Steel Clad Plate by Vacuum Rolling Cladding

  • Guang-ming Xie,
  • De-han Yang,
  • Zong-an Luo,
  • Ming Li and ,
  • Ming-kun Wang and
  • R. D. K. Misra
  • + 1 author+ 0 author

15 October 2018

We elucidate here the determining role of Nb interlayer on mechanical properties of Ti/steel clad plate fabricated by vacuum rolling cladding (VRC) as a function of different heating temperatures. A critical analysis on the clad interface via electro...

  • Article
  • Open Access
13 Citations
3,541 Views
12 Pages

Diffusion Bonding of 9Cr Martensitic/Ferritic Heat-Resistant Steels with an Electrodeposited Ni Interlayer

  • Yan Gao,
  • Zumin Wang,
  • Yongchang Liu,
  • Wenchao Li and ,
  • Chenxi Liu and
  • Huijun Li
  • + 1 author+ 0 author

2 December 2018

In this paper, diffusion bonding was adopted to join 9Cr martensitic/ferritic heat-resistant steels using an electrodeposited Ni interlayer with a thickness of 40 μm. In addition, the effect of tempering treatment after diffusion bonding on the mi...

  • Article
  • Open Access
3 Citations
2,057 Views
14 Pages

Experimental Investigation of the Mesostructural Damage in Bedded Rock Salt During Creep Deformation

  • Fengfei Ren,
  • Haiyang Yi,
  • Zheng Chen,
  • Tianzi Zhang and ,
  • Ze Li and
  • Hao Zhong
  • + 1 author+ 0 author

26 March 2025

This study investigates the mesostructural damage evolution and creep deformation mechanisms in bedded rock salt through integrated scanning electron microscopy (SEM) and multistage creep experiments. Utilizing a self-developed in situ observation sy...

  • Article
  • Open Access
22 Citations
3,510 Views
15 Pages

18 November 2022

Fast charging capability is highly desired for new generation lithium-ion batteries used in consumer-grade electronic devices and electric vehicles. However, currently used anodes suffer from sluggish ion kinetics due to limited interlayer distance....

(This article belongs to the Section Nanoelectronics, Nanosensors and Devices)
  • Article
  • Open Access
14 Citations
3,707 Views
14 Pages

Natural biological nanocomposites, like nacre, demonstrate extraordinary fracture toughness, surpassing their base materials, attributed to their intricate staggered hierarchical architectures integrating hard and soft phases. The enhancement of toug...

(This article belongs to the Special Issue Manufacturing, Characterization and Biomedical Applications of Advanced Micro/Nanocomposites)
  • Article
  • Open Access
709 Views
21 Pages

Swing-Arc Narrow-Gap Submerged Arc-Welding Process Assisted by Pre-Embedding Cold Wires

  • Shubin Liu,
  • Yupeng Cao,
  • Hong Li,
  • Jie Zhu and ,
  • Changxin Zhou,
  • Zhengyu Zhu and
  • Jiayou Wang
  • + 2 authors+ 0 author

21 April 2026

To solve the problems of poor weld formation, difficult slag removal, and inferior joint microstructure and hardness in conventional narrow-gap submerged arc welding (NG-SAW), a swing arc NG-SAW process assisted by pre-embedding cold wires was propos...

  • Article
  • Open Access
6 Citations
1,881 Views
28 Pages

25 October 2025

Effective thermal management is essential in metal additive manufacturing to ensure process stability and desirable material properties. Directed energy deposition using a laser beam and wire (DED-LB/w) enables the production of large, high-performan...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
393 Views
19 Pages

Effect of Micro-Structure and Mechanical Properties on 309L Austenitic Stainless Steel Deposition by Cold Metal Transfer Wire-Arc Additive Manufacturing

  • Guosheng Fei,
  • Zuofa Liu,
  • Zhongli Li,
  • Xiaoci Chen and ,
  • Shangbin Zhang,
  • Yingyan Yu and
  • Jiansheng Zhang
  • + 2 authors+ 0 author

10 October 2026

Wire-arc additive manufacturing based on cold metal transfer (CMT-WAAM) is a high-precision forming technology suitable for thin-wall stainless steel parts, yet the unclear correlations between linear energy density, forming stability, microstructure...

(This article belongs to the Special Issue Next-Generation Metal Additive Manufacturing: Intelligent Microstructure Design, Mechanical Reliability, and Advanced Material Systems for Industrial Applications)
  • Review
  • Open Access
1 Citations
1,671 Views
38 Pages

Weak Interlayer Interfaces in 3D-Printed Concrete: Formation Mechanisms, Cross-Scale Consequences, and Control Strategies

  • Rongfei Zhang,
  • Chao Liu,
  • Zhenhua Duan,
  • Zhenyuan Lv and ,
  • Wei Zhang and
  • Huawei Liu
  • + 1 author+ 0 author

3D-printed concrete (3DPC) enables formwork-free automated construction with geometric flexibility and improved material efficiency, yet its engineering reliability remains limited by interlayer weakening generated during sequential deposition. This...

(This article belongs to the Section Architectural and Infrastructure Coatings)
  • Article
  • Open Access
3 Citations
2,451 Views
17 Pages

17 May 2023

The phase structure of the precursor is crucial for the microstructure evolution and stability of Ni-rich cathode materials. Using sodium lactate as a green complexing agent, cathode electrode materials with different phase structures and unique core...

  • Article
  • Open Access
5 Citations
3,047 Views
11 Pages

AlF3-Modified Carbon Anodes for Aluminum Electrolysis: Oxidation Resistance and Microstructural Evolution

  • Guifang Xu,
  • Yonggang Ding,
  • Fan Bai,
  • Youming Zhang and ,
  • Jianhua Yin and
  • Caifeng Chen
  • + 1 author+ 0 author

The aluminum electrolysis industry faces significant challenges due to the high consumption and environmental impact of carbon anodes, which are prone to oxidation in high-temperature and strongly oxidizing environments. This study innovatively intro...

(This article belongs to the Section Inorganic Materials)
  • Review
  • Open Access
75 Citations
12,303 Views
22 Pages

This article provides a comprehensive review of the advancements made in the diffusion bonding of titanium and its alloys to other advanced materials such as aluminium, stainless steel, and magnesium. This combination of advanced alloys has received...

  • Article
  • Open Access
11 Citations
3,565 Views
9 Pages

Spark Plasma Diffusion Bonding of TiAl/Ti2AlNb with Ti as Interlayer

  • Boxian Zhang,
  • Chunhuan Chen,
  • Jianchao He,
  • Jinbao Hou and ,
  • Lu Chai and
  • Yanlong Lv
  • + 1 author+ 0 author

24 July 2020

To solve the problem of poor weldability between TiAl-based and Ti2AlNb-based alloys, spark plasma diffusion bonding was employed to join a TiAl alloy and a Ti2AlNb alloy with a pure Ti foil as interlayer at 950 °C/10 KN/60 min. After welding, sl...

(This article belongs to the Collection Welding and Joining Processes of Materials)
  • Article
  • Open Access
728 Views
18 Pages

Elaboration and Solar Thermal Cycling of SiC/Al2O3/Fe–Cr–Al–Mo Multilayers

  • Thiane Ndiaye,
  • Reine Reoyo-Prats,
  • Frédéric Mercier,
  • Thierry Encinas and ,
  • Stéphane Coindeau,
  • Christophe Escape and
  • Ludovic Charpentier
  • + 2 authors+ 0 author

Concentrated Solar Power (CSP) tower systems require receiver materials capable of operating above 1000 °C to meet the efficiency targets of third-generation technologies (25–30%). Hybrid solutions, combining ceramic coatings with metallic...

  • Article
  • Open Access
986 Views
27 Pages

8 June 2026

Grey cast iron brake discs remain standard in automotive braking systems due to their favourable thermal conductivity and mechanical strength. However, increasingly stringent environmental regulations, including Euro 7, necessitate enhanced surface d...

(This article belongs to the Special Issue Recent Advances in Microstructure, Experiment and Numerical Simulation of Steel)
  • Article
  • Open Access
1 Citations
691 Views
15 Pages

12 December 2025

This study investigates the long-term service effects on Chinese fir (Cunninghamia lanceolata) components from ancient timber buildings in southern China. Anisotropic mechanical tests were performed to examine the evolution of mechanical properties f...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Feature Paper
  • Article
  • Open Access
1 Citations
1,382 Views
14 Pages

16 January 2026

The bonding behavior of the Ni-based superalloy CM247LC during transient liquid phase (TLP) bonding is strongly governed by filler metal chemistry, particularly boron activity. In this study, the time-dependent bonding mechanisms of CM247LC joints fa...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Review
  • Open Access
597 Views
31 Pages

Advances in Additive Manufacturing of Composites via Friction Stir Deposition

  • Xiaohong Liu,
  • Zhihao Chen,
  • Yunping Li,
  • Zhigao Chen and ,
  • Hui Wang,
  • Xiaowei Wang and
  • Dongwei Shu
  • + 2 authors+ 0 author

15 September 2026

The growing demand for large, lightweight, heat-resistant, and multifunctional aerospace structures has raised the requirements for metal matrix composites in terms of defect minimization, performance enhancement, and near-net-shape manufacturing. Ad...

(This article belongs to the Special Issue Additive Manufacturing and Forming Technologies of Alloy: Mechanical Properties and Microstructure Evaluation (Second Edition))
  • Feature Paper
  • Article
  • Open Access
11 Citations
3,900 Views
13 Pages

Dissimilar Laser Welding of a NiTi Shape Memory Alloy to Ti2AlNb

  • Fuguo Ge,
  • Bei Peng,
  • João Pedro Oliveira,
  • Wenchao Ke and ,
  • Fissha Biruke Teshome,
  • Yongmei Li and
  • Zhi Zeng
  • + 2 authors+ 0 author

4 October 2021

NiTi-based shape memory alloys and the Ti2AlNb alloy have gained increasing importance in the aerospace field. The joining of these two materials can further increment the importance and usage of these relevant engineering materials and expand their...

(This article belongs to the Special Issue Advanced Welding Technology in Metals II)
  • Review
  • Open Access
5 Citations
1,558 Views
33 Pages

18 May 2026

Wire Arc Additive Manufacturing (WAAM) is a cost-effective and scalable technique for producing large metallic components; however, coarse columnar microstructures, strong crystallographic texture, and significant residual stresses limit its widespre...

(This article belongs to the Special Issue Innovations and Challenges in Metal Materials Additive Manufacturing)
  • Article
  • Open Access
2 Citations
2,188 Views
13 Pages

11 August 2024

By employing a cyclic warm rolling technique, MoCu30 alloy sheets of different thicknesses were prepared to investigate the effects of various rolling reduction rates on the microstructure and mechanical properties of MoCu30 alloys. Additionally, the...

  • Article
  • Open Access
873 Views
30 Pages

26 February 2026

The main aim of this study was to evaluate the applicability of a low-cost, double-wall gas metal arc welding (GMAW)-based wire arc additive manufacturing (WAAM) process for aluminum alloy AlMg5, with an emphasis on microstructural heterogeneity, lay...

(This article belongs to the Special Issue Additive Manufacturing of Alloys: Microstructure and Mechanical Performance, 2nd Edition)
  • Article
  • Open Access
17 Citations
5,202 Views
11 Pages

Interlayer Investigations of GaN Heterostructures Integrated into Silicon Substrates by Surface Activated Bonding

  • Shi Zhou,
  • Shun Wan,
  • Bo Zou,
  • Yanping Yang and ,
  • Huarui Sun,
  • Yan Zhou and
  • Jianbo Liang
  • + 2 authors+ 0 author

24 January 2023

Thinning the buffer layer thickness between the GaN epilayer and Si substrate without introducing large residual stress is persistently desired for GaN-on-Si devices to promote their thermal budgets and low-cost, multifunctional applications. In this...

(This article belongs to the Special Issue Feature Paper in "Materials for Energy Applications" 2022–2023)
  • Review
  • Open Access
1 Citations
512 Views
35 Pages

Heat Treatment Effects on Additively Manufactured Polymer Matrix Composites

  • Germán Omar Barrionuevo,
  • Felipe Fernández,
  • Yuvaraj Ravishankar Chappidi,
  • Jorge Ramos-Grez and ,
  • Wilson Navas-Pinto,
  • Jonathan D. Reyes-Ortiz and
  • Duncan E. Cree
  • + 2 authors+ 0 author

8 October 2026

Additive manufacturing (AM) of polymer matrix composites (PMCs) enables the fabrication of complex, structurally efficient parts, but the layer-wise thermal history intrinsic to processes such as material extrusion, vat photopolymerization, powder be...

(This article belongs to the Special Issue Additive Manufactuging of Polymer-Based Nanocomposites and Composites: Progress and Prospects)
  • Review
  • Open Access
1 Citations
1,029 Views
23 Pages

The performance and durability of lithium metal solid-state batteries are governed by the dynamic evolution of the lithium/solid-electrolyte (Li/SSE) interface, where electrochemical reactions, mass transport, and mechanical constraints are intrinsic...

  • Feature Paper
  • Article
  • Open Access
5 Citations
2,114 Views
25 Pages

17 January 2025

Laser welding (sealing) is a promising technology for joining metal to glass, but it shows poor joint strength in existing studies. This study conducted the laser sealing of a 304 stainless steel alloy to high-alumina glass using pre-oxidation and la...

(This article belongs to the Special Issue Effects of Laser Treatment on Surface Characterization and Mechanical Properties of Alloys, 2nd Edition)
  • Article
  • Open Access
1,093 Views
9 Pages

Impact of Carbon Diffusion Induced Stress on the Properties of Diamond/GaN Heterojunctions

  • Haolun Sun,
  • Mei Wu,
  • Peng Xu,
  • Chao Yuan and ,
  • Ling Yang,
  • Hao Lu,
  • Bin Hou,
  • Meng Zhang,
  • Xiaohua Ma and
  • Yue Hao
  • + 5 authors+ 0 author

12 February 2026

Integrating diamond with GaN provides an effective pathway to mitigate self-heating. However, the thermal boundary resistance (TBR) remains a persistent bottleneck for further heat dissipation. While carbon (C) diffusion into the SiNx interlayer is k...

(This article belongs to the Section Nanoelectronics, Nanosensors and Devices)
  • Article
  • Open Access
3 Citations
908 Views
17 Pages

Transient Liquid Phase Bonding of Hastelloy X with Inconel 738 Superalloy Using BNi-2 Interlayer: Microstructure and Mechanical Properties

  • Lin Yang,
  • Yuwei Zhao,
  • Xingdong Chen,
  • Ke Li and ,
  • Xingyu Zhang,
  • Panpan Lin,
  • Tiesong Lin and
  • Peng He
  • + 3 authors+ 0 author

6 January 2026

The dissimilar joining of solid-solution-strengthened superalloys and precipitation-strengthened superalloys enables complementary performance synergy, holding significant application potential in the aerospace industry. This study investigated the t...

(This article belongs to the Special Issue Mechanical Properties and Structural Reliability of Advanced Materials)
  • Article
  • Open Access
4 Citations
1,857 Views
22 Pages

Influence of N2 Flow Rate on Mechanical and Tribological Properties of TAlN Coatings Deposited on 300M Substrate and Nitrocarburized Layer

  • Shiwei Zuo,
  • Qinghua Li,
  • Zhehang Fan,
  • Xiaoyong Tao and ,
  • Xiangjie Wang,
  • Hui Xie,
  • Qianqian Shen,
  • Tianshi Jia and
  • Hongyan Wu
  • + 4 authors+ 0 author

This study systematically investigates the influence of nitrogen (N2) flow rates and nitrocarburized (PNC) interlayers on the mechanical and tribological properties of TiAlN coatings deposited on 300M steel substrates via magnetron sputtering. The co...

  • Article
  • Open Access
1 Citations
1,087 Views
15 Pages

15 January 2026

With the rapid depletion of natural graphite, the synthesis of artificial graphite from high-carbon precursors has garnered growing interest. However, conventional artificial graphitization typically requires extremely high temperatures. This study d...

(This article belongs to the Special Issue Graphite Minerals and Graphene, 2nd Edition)
  • Review
  • Open Access
2 Citations
974 Views
60 Pages

Additive manufacturing (AM) has emerged as a transformative manufacturing technology for producing complex components with unprecedented design flexibility. However, the widespread application of AM parts in tribological environments is often limited...

(This article belongs to the Special Issue Tribological Considerations in Additive Manufacturing: 3D Printing Materials and Techniques)
  • Article
  • Open Access
8 Citations
3,156 Views
14 Pages

Preparation of Monoclinic Pyrrhotite by Thermal Decomposition of Jarosite Residues and Its Heavy Metal Removal Performance

  • Cuimin Xu,
  • Qiaoqin Xie,
  • Fan Xu,
  • Yuefei Zhou and ,
  • Hanlin Wang,
  • Tianhu Chen and
  • Shuchuan Peng
  • + 2 authors+ 0 author

5 March 2021

Jarosite residues produced by zinc hydrometallurgical processing are hazardous solid wastes. In this study, monoclinic pyrrhotite (M-Po) was prepared by the pyrolysis of jarosite residues in H2S atmosphere. The influence of gas speed, reaction temper...

(This article belongs to the Section Crystallography and Physical Chemistry of Minerals & Nanominerals)
  • Article
  • Open Access
9 Citations
2,273 Views
12 Pages

6 December 2023

Confined water inrush caused by fault activation is the main form of water disaster in deep mining. With theoretical analysis and similar simulation tests, the mechanism and evolution law of delayed water inrush caused by fault activation are reveale...

(This article belongs to the Special Issue The Research on Effects of Coal Mining on Groundwater Environment and System)
  • Review
  • Open Access
6 Citations
3,743 Views
36 Pages

Degradation and Long-Term Response Evaluation of Polymeric Components Produced by Additive Manufacturing

  • Claudia Solek,
  • Jorge Crespo-Sánchez,
  • Sergio Fuentes del Toro,
  • Jorge Ayllón and ,
  • Mariaenrica Frigione,
  • Ana María Camacho,
  • Juan Rodríguez-Hernández and
  • Alvaro Rodríguez-Prieto
  • + 3 authors+ 0 author

Additive manufacturing (AM) has rapidly evolved from a prototyping tool into an effective method for producing end-use components, thanks to its ability to produce complex, lightweight and customised parts. However, this technique requires a thorough...

(This article belongs to the Special Issue Advances in 3D Printing Technologies: Materials, Processes, and Applications, 2nd Edition)
  • Article
  • Open Access
252 Views
18 Pages

Effect of Molten-Salt Chemistry on Phase Evolution and Corrosion Degradation of Sc2O3-Y2O3 Co-Stabilized ZrO2 Thermal Barrier Ceramics

  • Maomao Guo,
  • Zhigang Wang,
  • Min Xie,
  • Rende Mu and ,
  • Xiwen Song,
  • Yonghe Zhang and
  • Ting Wang
  • + 2 authors+ 0 author

18 September 2026

The corrosion resistance of electron-beam physical vapor-deposited (EB-PVD) zirconia thermal-barrier coatings depends on ceramic phase stability. Here, conventional 8YSZ and two Sc2O3-Y2O3 co-stabilized ZrO2 coatings, ScYSZ and ScYSZ with an Al-rich...

(This article belongs to the Section Ceramic Coatings and Engineering Technology)

of 2