Skip to Content
You are currently on the new version of our website. Access the old version .
CoatingsCoatings
  • Review
  • Open Access

31 May 2026

38 Pages

Weak Interlayer Interfaces in 3D-Printed Concrete: Formation Mechanisms, Cross-Scale Consequences, and Control Strategies

,
,
,
,
and
1
PowerChina Kunming Engineering Corporation Limited, Kunming 650051, China
2
School of Civil Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China
3
College of Civil Engineering, Tongji University, Shanghai 200092, China
4
China Construction Eighth Engineering Division Co., Ltd., Shanghai 200112, China

Abstract

3D-printed concrete (3DPC) enables formwork-free automated construction with geometric flexibility and improved material efficiency, yet its engineering reliability remains limited by interlayer weakening generated during sequential deposition. This review critically examines the formation, cross-scale consequences, and control of weak interlayer interfaces in 3DPC. In most studies, the 3DPC printing interval ranges from 20 s to 120 min, and the average interfacial bond strength ranges from 0.1 to 16 MPa. Interfacial weakness arises from the asynchronous evolution of adjacent layers in terms of contact quality, rheological recovery, moisture exchange, and early-age hydration. This mismatch promotes pore enrichment, discontinuity of hydration products, reduced phase continuity, and consequent local mechanical softening. These defects govern interlayer bonding, crack propagation, anisotropy, and stress-transfer pathways, and their effects propagate from material properties to member response, structural performance, and durability degradation. Rather than treating the interface as a localized cold joint, this review frames it as a process-induced multiscale variable linking printing history, microstructure, mechanical response, transport behavior, and serviceability. Current research remains constrained by non-comparable testing methods, undefined quantitative thresholds, and models that still rely heavily on empirical calibration. Future work should establish standardized characterization, transferable interface descriptors, multiscale predictive models, real-time quality control, and design methods that explicitly incorporate interfacial variability.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.