Skip to Content
You are currently on the new version of our website. Access the old version .

375 Results Found

  • Article
  • Open Access
458 Views
13 Pages

A Morphology-Based Analysis of Crack Initiation, Propagation and Arrest Behaviors in Pre-Defected CO2 Pipelines

  • Lei Shi,
  • Xiaolin Wang,
  • Yuxin Wang,
  • Zhenxi Liu and ,
  • Xingqing Yan,
  • Jianliang Yu and
  • Lei Chen
  • + 2 authors+ 0 author

3 September 2026

Crack initiation, propagation and arrest in high-pressure CO2 pipelines are strongly affected by decompression behavior, defect geometry and material resistance. In this study, nine DN100-scale CO2 pipe burst tests with prefabricated axial defects we...

(This article belongs to the Section Process Safety and Risk Management)
  • Article
  • Open Access
8 Citations
4,252 Views
23 Pages

12 June 2020

In order to study the effect of initial defects on fatigue crack propagation law, a test method to identify fatigue crack propagation rate and path based on load waveform variation was presented, and a new test device was designed to apply fatigue pu...

  • Article
  • Open Access
352 Views
31 Pages

24 September 2026

Steel square hollow section (SHS) members are widely used in buildings, bridges, and industrial structures due to their high strength-to-weight ratio and torsional resistance. In steel SHS members, crack-like initial defects may occur due to environm...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
9 Citations
3,647 Views
16 Pages

Fatigue Life Assessment in the Typical Structure of Large Container Vessels Based on Fracture Mechanics

  • Jinfeng Liu,
  • Guoqing Feng,
  • Jiaying Wang,
  • Huilong Ren and ,
  • Wei Song and
  • Panpan Lin
  • + 1 author+ 0 author

30 October 2023

Welding defects are known to cause crack propagation and reduce structural fatigue performance. Based on the Paris theory of fracture mechanics, research is conducted on evaluation methods for analyzing fatigue crack propagation by adopting random lo...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
42 Citations
7,387 Views
20 Pages

Hydrogen-Accelerated Fatigue of API X60 Pipeline Steel and Its Weld

  • Lorenzo Etienne Faucon,
  • Tim Boot,
  • Ton Riemslag,
  • Sean Paul Scott and ,
  • Ping Liu and
  • Vera Popovich
  • + 1 author+ 0 author

10 March 2023

In this work, the hydrogen fatigue of pipeline steel X60, its girth welds and weld defects were investigated through in situ fatigue testing. A novel in situ gaseous hydrogen charging fatigue set-up was developed, which involves a sample geometry tha...

  • Data Descriptor
  • Open Access
3 Citations
2,377 Views
21 Pages

8 April 2026

As part of a NASA University Leadership Initiative (ULI) program, this work supports the continued development and evaluation of a fatigue-based process window for stress-relieved Ti-6Al-4V specimens produced via laser powder bed fusion (PBF-LB/M). F...

  • Article
  • Open Access
948 Views
23 Pages

Crack Propagation Analysis of Steels with Initial Defects by New Peridynamics

  • Jinhai Zhao,
  • Gang Zong,
  • Shimin Zhang,
  • Lingpeng Ye and ,
  • Jie Xiao and
  • Xinzan Hu
  • + 1 author+ 0 author

29 October 2025

Steel structure specimens exhibit high strength and ductility and are often subjected to complex loading conditions and pre-existing cracks in critical engineering applications. In this study, peridynamics (PD) theory—known for its unique advan...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
15 Citations
4,382 Views
22 Pages

7 September 2022

Orthotropic steel decks (OSDs) are inevitably subjected to fatigue damage caused by cycled vehicle loads in long-span bridges. This study establishes a probabilistic analysis framework integrating the dynamic Bayesian network (DBN) and fracture mecha...

(This article belongs to the Special Issue Smart Sensing and Artificial Intelligence for Civil Infrastructure Monitoring and Management)
  • Article
  • Open Access
4 Citations
2,283 Views
12 Pages

A Detailed Analysis of the Microstructural Changes in the Vicinity of a Crack-Initiating Defect in Additively Manufactured AISI 316L

  • Bastian Blinn,
  • Jenifer Barrirero,
  • Lucía Paula Campo Schneider,
  • Christoph Pauly and ,
  • Philipp Lion,
  • Frank Mücklich and
  • Tilmann Beck
  • + 2 authors+ 0 author

8 February 2023

The fatigue life of metals manufactured via laser-based powder bed fusion (L-PBF) highly depends on process-induced defects. In this context, not only the size and geometry of the defect, but also the properties and the microstructure of the surround...

(This article belongs to the Section Metal Failure Analysis)
  • Article
  • Open Access
21 Citations
5,106 Views
12 Pages

Very High Cycle Fatigue Behavior of a Directionally Solidified Ni-Base Superalloy DZ4

  • Baohua Nie,
  • Zihua Zhao,
  • Shu Liu,
  • Dongchu Chen and ,
  • Yongzhong Ouyang,
  • Zhudong Hu,
  • Touwen Fan and
  • Haibo Sun
  • + 3 authors+ 0 author

10 January 2018

The effect of casting pores on the very high cycle fatigue (VHCF) behavior of a directionally solidified (DS) Ni-base superalloy DZ4 is investigated. Casting and hot isostatic pressing (HIP) specimens were subjected to very high cycle fatigue loading...

  • Review
  • Open Access
16 Citations
3,257 Views
23 Pages

Research Viewpoint on Performance Enhancement for Very-High-Cycle Fatigue of Ti-6Al-4V Alloys via Laser-Based Powder Bed Fusion

  • Chun Gao,
  • Yang Zhang,
  • Jingjiang Jiang,
  • Rui Fu and ,
  • Leiming Du and
  • Xiangnan Pan
  • + 1 author+ 0 author

23 August 2024

Additive manufacturing (AM) or 3D printing is a promising industrial technology that enables rapid prototyping of complex configurations. Powder Bed Fusion (PBF) is one of the most popular AM techniques for metallic materials. Until today, only a few...

(This article belongs to the Special Issue Fatigue and Fracture of Crystalline Metal Structures)
  • Article
  • Open Access
6 Citations
1,794 Views
21 Pages

The Effect of Preloaded Compressive Stress and Curvature of Defect on Blast-Induced Fracture Behavior by Caustic and Numerical Models

  • Chen Huang,
  • Zong-Xian Zhang,
  • Adeyemi Aladejare,
  • Xianbo Guan and ,
  • Bingbing Yu and
  • Liyun Yang
  • + 1 author+ 0 author

3 November 2023

In this study, the effects of preloaded uniaxial compressive stress and defect (prefabricated by laser cutting) curvature on blast-induced cracks and stress wave propagation were investigated in polymethyl methacrylate (PMMA) specimens using caustics...

(This article belongs to the Section E2: Control Theory and Mechanics)
  • Article
  • Open Access
4 Citations
1,777 Views
16 Pages

Study on the Fracture Evolution Characteristics of Existing Defect Lining under Unsymmetrical Load

  • Junwei Li,
  • Fei Xu,
  • Xinyu Zheng,
  • Bo Liu and ,
  • Tao Bai and
  • Qingjingyi Tang
  • + 1 author+ 0 author

14 June 2023

In order to explore the fracture evolution characteristics of existing defect lining structures under unsymmetrical loads, unsymmetrical failure model tests of three working conditions, namely, intact lining, vault defect, and arch waist defect, were...

  • Article
  • Open Access
48 Citations
6,058 Views
14 Pages

Microstructure and Fatigue Damage of 316L Stainless Steel Manufactured by Selective Laser Melting (SLM)

  • Zhentao Wang,
  • Shanglei Yang,
  • Yubao Huang,
  • Cong Fan and ,
  • Zeng Peng and
  • Zihao Gao
  • + 1 author+ 0 author

8 December 2021

In this paper, 316L stainless steel powder was processed and formed by selective laser melting (SLM). The microstructure of the sample was studied using an optical microscope, and the fatigue failure of the sample and the characteristics of crack ini...

(This article belongs to the Special Issue Recent Advances in Mechanisms of Fracture and Fatigue)
  • Article
  • Open Access
3 Citations
2,282 Views
12 Pages

29 March 2025

The role of notch stress and surface defects on fatigue crack initiation and small-crack propagation behavior has been investigated using groove simulation specimens. The naturally initiated small-crack growth tests have been performed on a FGH4099 s...

(This article belongs to the Special Issue Fatigue Assessment of Metals)
  • Article
  • Open Access
9 Citations
2,555 Views
18 Pages

12 September 2024

Understanding short fatigue-crack propagation behavior is inevitable in the defect-tolerant design of structures. Short cracks propagate differently from long cracks, and the amount of crack closure plays a key role in the propagation behavior of sho...

(This article belongs to the Special Issue Advances in High Cycle Fatigue and Fracture Failure of Metallic Materials and Components)
  • Article
  • Open Access
775 Views
22 Pages

26 January 2026

Silicon nitride (Si3N4) ceramic bearings inevitably contain crack-like defects, yet their compressive capacity degradation and crack-driven failure mechanisms remain unclear. This study proposes a discrete element method (DEM) numerical framework wit...

(This article belongs to the Special Issue Ceramic-Based Coatings for High-Performance Applications)
  • Article
  • Open Access
30 Citations
4,257 Views
21 Pages

A Crack Propagation Method for Pipelines with Interacting Corrosion and Crack Defects

  • Mingjiang Xie,
  • Yifei Wang,
  • Weinan Xiong,
  • Jianli Zhao and
  • Xianjun Pei

27 January 2022

Corrosion and crack defects often exist at the same time in pipelines. The interaction impact between these defects could potentially affect the growth of the fatigue crack. In this paper, a crack propagation method is proposed for pipelines with int...

(This article belongs to the Special Issue Advanced Sensing, Fault Diagnostics, and Structural Health Management)
  • Article
  • Open Access
3 Citations
1,963 Views
13 Pages

23 November 2023

Defects are an inevitable occurrence during the manufacturing and use of ferromagnetic materials, making it crucial to study the microscopic mechanism of magnetostrictive properties of ferromagnetic materials with defects. This paper conducts molecul...

(This article belongs to the Section Theory and Simulation of Nanostructures)
  • Article
  • Open Access
1,377 Views
25 Pages

Investigation of Stress Intensity Factors in Welds of Steel Girders Within Steel–Concrete Composite Structures

  • Da Wang,
  • Pengxin Zhao,
  • Yuxin Shao,
  • Wenping Peng and ,
  • Junxin Yang,
  • Chenggong Zhao and
  • Benkun Tan
  • + 2 authors+ 0 author

27 July 2025

Fatigue damage in steel–concrete composite structures frequently initiates at welded joints due to stress concentrations and inherent defects. This study investigates the stress intensity factors (SIFs) associated with fatigue cracks in the wel...

(This article belongs to the Special Issue Innovations in Static and Dynamic Performance of Steel and Composite Structures)
  • Article
  • Open Access
37 Citations
6,450 Views
10 Pages

28 July 2017

Recent research shows that macro-scale cracking in asphalt binder may originate from its intrinsic defects at the nano-scale. In this paper, a molecular dynamics (MD) simulation was conducted to evaluate the nucleation of natural defects in asphalt....

(This article belongs to the Special Issue Advanced Asphalt Materials and Paving Technologies)
  • Article
  • Open Access
9 Citations
6,884 Views
13 Pages

21 July 2017

This article deals with the computational modelling of the fatigue crack aspect ratio evolution in embedded, surface, and corner cracks located in finite-thickness plates under tensile fatigue. The approach is based on the Paris law for fatigue propa...

  • Article
  • Open Access
28 Citations
3,167 Views
16 Pages

24 June 2021

To explore the failure mechanism of rock with holes and fissures, uniaxial compression tests of sandstone samples with combined double hole and double fissure defects were carried out using Particle Flow Code 2D (PFC2D) numerical simulation software....

(This article belongs to the Special Issue Advances in Geotechnical Engineering during Deep Energy Exploitation)
  • Article
  • Open Access
1,461 Views
15 Pages

This study conducts numerical analysis of fatigue crack propagation in deck-rib welded joints of orthotropic steel decks (OSDs) using linear elastic fracture mechanics. The stress intensity factor for central surface cracks under constant range bendi...

(This article belongs to the Special Issue Feature Papers of Computational Modelling and Simulation for Fatigue and Fracture of Engineering Materials and Structures)
  • Article
  • Open Access
4 Citations
1,413 Views
21 Pages

Multiscale Simulation of Crack Propagation in Impact-Welded Al4Cu9 Alloy Based on Cohesive Zone Model

  • Rongqing Luo,
  • Dingjun Xiao,
  • Guangzhao Pei,
  • Haixia Yan and ,
  • Sen Han,
  • Jiajie Jiang and
  • Miaomiao Zhang
  • + 2 authors+ 0 author

23 October 2025

The fracture behavior of the Al4Cu9 intermetallic compound at the interface of impact-welded Cu/Al joints remains insufficiently explored through integrated multiscale modeling and experimental validation. In this study, molecular dynamic (MD) simula...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
9 Citations
3,285 Views
12 Pages

11 April 2022

In this paper, the axial loading fatigue tests are at first conducted on specimens ofG20Mn5QT steel from axle box bodies in high-speed trains. Then, the size and shape effects on fatigue behavior are investigated. It is shown that the specimen size a...

(This article belongs to the Special Issue Deformation, Fracture and Microstructure of Metallic Materials)
  • Article
  • Open Access
2 Citations
904 Views
26 Pages

Under random wave loading, the crack growth rate exhibits jump-like cycle-to-cycle variations, which limit the direct use of efficient integration schemes such as the Euler method. In addition, the crack growth life is highly sensitive to the initial...

(This article belongs to the Special Issue Analysis of Strength, Fatigue, and Vibration in Marine Structures)
  • Feature Paper
  • Article
  • Open Access
15 Citations
3,929 Views
15 Pages

Crack Initiation in Ni-Based Single Crystal Superalloy under Low-Cycle Fatigue-Oxidation Conditions

  • Pengfei Wang,
  • Xinbao Zhao,
  • Quanzhao Yue,
  • Wanshun Xia and ,
  • Qingqing Ding,
  • Hongbin Bei,
  • Yuefeng Gu and
  • Ze Zhang
  • + 3 authors+ 0 author

11 November 2023

The mechanism of oxidation-assisted initiation of surface cracks of a fourth-generation Ni-based single crystal superalloy was systematically investigated during low cycle fatigue at 900 °C and 980 °C. The results show that cracks initiate ne...

(This article belongs to the Special Issue Environmentally-Assisted Degradation of Metals and Alloys)
  • Article
  • Open Access
4 Citations
1,660 Views
16 Pages

Heavy rolling contact fatigue (RCF) may be caused by wheel surface defects under the influence of rail corrosion, which threatens the operational safety of rail vehicles. To investigate the role of surface defects on wheel RCF damage under the influe...

(This article belongs to the Special Issue Advancements in Surface Engineering, Coatings and Tribology)
  • Article
  • Open Access
5 Citations
2,718 Views
17 Pages

30 September 2022

AerMet 100 exhibits excellent mechanical properties, proven in previous studies; however, defects may greatly influence the mechanical behavior during the service of the material, which serves as one of the major challenges in the wider application o...

(This article belongs to the Special Issue Fracture Mechanics of Metals)
  • Article
  • Open Access
2 Citations
2,427 Views
11 Pages

Effect of Excess Atomic Volume on Crack Evolution in a Deformed Iron Single Crystal

  • Dmitrij S. Kryzhevich,
  • Aleksandr V. Korchuganov and
  • Konstantin P. Zolnikov

15 October 2021

This paper presents a molecular dynamics study of how the localization and transfer of excess atomic volume by structural defects affects the evolution and self-healing of nanosized cracks in bcc iron single crystals under different mechanical loadin...

(This article belongs to the Special Issue Computer-Aided Design and Modeling of Materials at Different Scales)
  • Article
  • Open Access
6 Citations
1,814 Views
19 Pages

Recast Layer-Induced Fatigue Degradation in High-Speed EDM Microholes: Experimental Characterization

  • Yaou Zhang,
  • Qian Zheng,
  • Zeyu Wu,
  • Hualin Liao and ,
  • Yifan Lu and
  • Juncheng Lu
  • + 1 author+ 0 author

27 April 2025

High-speed electrical discharge machining (EDM) is crucial for drilling aerospace components, but the fatigue effects of its recast layer are still not well understood. This study investigates the fatigue behavior of high-speed EDM-processed specimen...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
119 Citations
3,754 Views
17 Pages

5 August 2023

Weld defects such as porosity, inclusion, burn-through, and lack of penetration are difficult to detect and control effectively in an orthotropic steel deck (OSD), which will be a fatigue crack initiation site and lead to several fatigue cracking. Th...

(This article belongs to the Section Welding and Joining)
  • Article
  • Open Access
1 Citations
1,617 Views
15 Pages

Defect Analysis and Improvement Method of Eccentric Camshaft Forging by Vertical Upsetting Extrusion Forming

  • Tao Wang,
  • Hongxing Sun,
  • Nan Hu,
  • Dan Liu and ,
  • Zhen Wang,
  • Guanghui Liu,
  • Chao Zhang and
  • Hua Liu
  • + 3 authors+ 0 author

26 March 2025

Eccentric camshaft components serve as critical elements in emergency pump systems for commercial vehicle steering mechanisms. To optimize material utilization efficiency, reduce production costs, and enhance manufacturing throughput, this investigat...

(This article belongs to the Special Issue Fracture and Fatigue in Metals and Alloys)
  • Article
  • Open Access
5 Citations
2,347 Views
13 Pages

7 February 2023

The creation of the natural ceiling rock of the coal seam is rife with fractures, holes, and other flaws. The angle of the defects has a significant influence on the mechanical characteristics and crack evolution of coal seam roof rock. Multi-scale n...

(This article belongs to the Special Issue Microstructure, Characterization and Mechanical Properties of Coal and Coal-Like Materials)
  • Article
  • Open Access
9 Citations
4,633 Views
12 Pages

9 December 2021

In this paper, the fracture behaviors of 316L stainless steel with defects fabricated by the Selective Laser Melting (SLM) additive manufacturing are studied by a peridynamic method. Firstly, the incremental formulations in the peridynamic framework...

(This article belongs to the Special Issue Additive Manufacturing (AM) for Advanced Materials and Structures: Green and Intelligent Development Trend)
  • Article
  • Open Access
3 Citations
2,958 Views
12 Pages

14 April 2020

The mechanics of damage and fracture process in unidirectional carbon fiber reinforced polymer (CFRP) composites subjected to shear loading (Mode II) were examined using the experimental method of the three-point end-notch flexure (3ENF) test. The CF...

  • Article
  • Open Access
3 Citations
892 Views
29 Pages

Fracture Evolution in Rocks with a Hole and Symmetric Edge Cracks Under Biaxial Compression: An Experimental and Numerical Study

  • Daobing Zhang,
  • Linhai Zeng,
  • Shurong Guo,
  • Zhiping Chen and ,
  • Jiahua Zhang,
  • Xianyong Jiang,
  • Futian Zhang and
  • Anmin Jiang
  • + 3 authors+ 0 author

18 December 2025

This study employs physical experiments and the RFPA3D numerical method to investigate the fracture evolution of rocks containing a central hole with symmetrically arranged double cracks (seven inclination angles β) under biaxial compression. Th...

(This article belongs to the Special Issue Numerical Simulation and Analysis of Rock Mechanics Engineering Geology)
  • Article
  • Open Access
9 Citations
3,631 Views
20 Pages

7 July 2022

The fracture behavior of the Cu/Sn-3.0Ag-0.5Sn (SAC305)/Cu solder joint was investigated by conducting tensile tests with in situ X-ray micro-computed tomography (μ-CT) observation, and finite element (FE) simulation. The tensile fracture process of...

(This article belongs to the Special Issue Mechanical Properties and Deformation Mechanisms of Advanced Metals and Alloys)
  • Feature Paper
  • Review
  • Open Access
19 Citations
5,904 Views
14 Pages

28 September 2021

A perspective is presented on the evolution of damage due to environmentally assisted cracking (EAC), from crack precursor development through to long crack growth. The variable nature of crack precursors is highlighted with an observation that uncon...

(This article belongs to the Special Issue Mechanism and Predictive/Deterministic Aspects of Corrosion)
  • Article
  • Open Access
20 Citations
6,416 Views
21 Pages

14 September 2017

Axial loading tests with stress ratios R of −1, 0 and 0.3 were performed to examine the fatigue failure behavior of a carburized Cr-Ni steel in the long-life regime from 104 to 108 cycles. Results show that this steel represents continuously descendi...

  • Article
  • Open Access
  • Best Paper Award
63 Citations
17,415 Views
24 Pages

25 January 2023

The cyclic plastic deformation of polycrystals leads to the inhomogeneous distribution of the cyclic plastic strain. The cyclic plastic strain is concentrated in thin bands, called persistent slip bands (PSBs). The dislocation structure of these band...

(This article belongs to the Special Issue Dislocation Mechanics of Crystal/Polycrystal Mechanical Strength Properties)
  • Article
  • Open Access
1 Citations
1,544 Views
19 Pages

Numerical Simulation of the 65Mn-Cr Steel Slab Solidification Process and Analysis of the Formation Mechanism of Internal Cracks

  • Li Zhang,
  • Lijun Xu,
  • Guifang Zhang,
  • Haibo Zhang and ,
  • Qi Jiang and
  • Shubiao Yin
  • + 1 author+ 0 author

17 February 2025

There are still internal defects such as triangular zone cracks, centerline cracks, and intermediate cracks in 65Mn-Cr steel during the production process, which mostly occur in the initial solidification. In order to explore the evolution of interme...

  • Article
  • Open Access
4 Citations
2,208 Views
11 Pages

Effect of Pore Defects on Very High Cycle Fatigue Behavior of TC21 Titanium Alloy Additively Manufactured by Electron Beam Melting

  • Qingdong Li,
  • Shuai Liu,
  • Binbin Liao,
  • Baohua Nie and ,
  • Binqing Shi,
  • Haiying Qi,
  • Dongchu Chen and
  • Fangjun Liu
  • + 3 authors+ 0 author

30 August 2023

Titanium alloys additively manufactured by electron beam melting (EBM) inevitably obtained some pore defects, which significantly reduced the very high cycle fatigue performance. An ultrasonic fatigue test was carried out on an EBM TC21 titanium allo...

(This article belongs to the Special Issue Crystallization of High Performance Metallic Materials)
  • Article
  • Open Access
22 Citations
5,654 Views
9 Pages

20 March 2018

The aim of this study was to clarify the effects of micro surface defects introduced by the focused ion beam (FIB) technique on the fracture strength of ceramics. Three-point bending tests on alumina-silicon carbide (Al2O3/SiC) ceramic composites con...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
19 Citations
4,428 Views
23 Pages

Modification of a Defect-Based Fatigue Assessment Model for Al-Si-Cu Cast Alloys

  • Roman Aigner,
  • Martin Leitner,
  • Michael Stoschka,
  • Christian Hannesschläger and ,
  • Thomas Wabro and
  • Robert Ehart
  • + 1 author+ 0 author

14 December 2018

Cast parts usually inherit internal defects such as micro shrinkage pores due to the manufacturing process. In order to assess the fatigue behaviour in both finite-life and long-life fatigue regions, this paper scientifically contributes towards a de...

(This article belongs to the Collection Alloy and Process Development of Light Metals)
  • Article
  • Open Access
3 Citations
3,605 Views
18 Pages

Carbon Fiber Reinforced Plastics Based on an Epoxy Binder with the Effect of Thermally Induced Self-Repair

  • Tuyara V. Petrova,
  • Ilya V. Tretyakov,
  • Aleksey V. Kireynov,
  • Elena O. Platonova and ,
  • Polina F. Ponomareva,
  • Olga V. Alexeeva,
  • Vitaliy I. Solodilov,
  • Gleb Yu. Yurkov and
  • Alexander Al. Berlin
  • + 4 authors+ 0 author

28 May 2023

The authors have proposed the novel approach for evaluation of the self-healing effect in carbon fiber reinforced plastics (CFRP) on micro- and macro samples, using the dynamic mechanical analysis (DMA) and the double-cantilever beam delamination met...

(This article belongs to the Special Issue Functional Polymers: Synthesis, Properties and Applications)
  • Feature Paper
  • Review
  • Open Access
3 Citations
2,957 Views
16 Pages

23 April 2021

Characterizing the fracture resistance of ferritic steels operating within their Ductile-to-Brittle Transition Zone (DBTZ) has been successfully addressed through the development of the well-known Master Curve (MC). This tool assumes that fracture, i...

(This article belongs to the Special Issue Failure Analysis in Metallic Materials)
  • Article
  • Open Access
1,330 Views
15 Pages

Experimental and Theoretical Study on the Crack Defect Effect on the Bearing Capacity of a Rectangular Culvert

  • Wanqiong Wang,
  • Shouhai Peng,
  • Xiaolong Chen,
  • Rongxi Mi and ,
  • Qingqing Wu and
  • Peng Zhang
  • + 1 author+ 0 author

25 November 2024

Rectangular culverts are extensively employed in various municipal projects. Due to their frequent placement in weak strata within urban areas, these structures are susceptible to defects like cracks, which can significantly reduce their bearing capa...

(This article belongs to the Section Building Structures)
  • Review
  • Open Access
3 Citations
1,866 Views
27 Pages

Slip Irreversibility, Microplasticity, and Fatigue Cracking Mechanism in Near-α and α + β Titanium Alloys

  • Adam Ismaeel,
  • Xuexiong Li,
  • Xirui Jia,
  • Ali Jamea and ,
  • Zongxu Chen,
  • Xuanming Feng,
  • Dongsheng Xu,
  • Xiaohu Chen and
  • Weining Lei
  • + 4 authors+ 0 author

25 January 2026

The micromechanisms “slip transfer, slip irreversibility, microplasticity, and fatigue cracking” in titanium alloys are reviewed, with a special emphasis on near-α and α + β alloys. As the interplay between slip activity,...

(This article belongs to the Section Metal Failure Analysis)

of 8