Skip to Content
You are currently on the new version of our website. Access the old version .

4,969 Results Found

  • Article
  • Open Access
11 Citations
3,737 Views
11 Pages

Glass Waste3: A Preliminary Study for a New Industrial Recovery Processing

  • Rossana Bellopede,
  • Lorena Zichella and
  • Paola Marini

5 March 2020

In recent times, the selection and treatment of glass waste are implemented in processing plants where a secondary raw material (SRM) named glass cullet, which is suitable for glass production, and a waste containing a high percentage of glass (glass...

(This article belongs to the Section Environmental Sustainability and Applications)
  • Article
  • Open Access
4 Citations
4,870 Views
14 Pages

VOC Emission Characteristics of the Glass Deep-Processing Industry in China

  • Fan Zhang,
  • Mingya Wang,
  • Mingshi Wang,
  • Chun Chen and ,
  • Xiyue Wang,
  • Xiaojun Nie,
  • Wenju Wang,
  • Qinqing Xiong,
  • Chunhui Zhang and
  • Xuechun Zhang
  • + 7 authors+ 2 authors

13 January 2023

To understand the pollution characteristics of volatile organic compounds (VOCs) in the glass deep-processing industry, samples were collected using polyvinyl fluoride bags and quickly transferred to summa tanks for GC/MS/FID analysis. The emission c...

(This article belongs to the Section Air Quality)
  • Article
  • Open Access
532 Views
15 Pages

Effect of Pozzolanic Glass Processing Waste on the Resistance of Sustainable Concrete to Alkali–Silica Reaction

  • Nagrockienė Džigita,
  • Pocius Edvinas,
  • Ina Pundienė and
  • Loreta Kanapeckienė

30 June 2026

The growing global consumption of concrete is driving up the demand for cement, which has a negative environmental impact due to intensive CO2 emissions. This impact can be reduced by replacing cement with reactive mineral industrial waste, simultane...

  • Article
  • Open Access
2,962 Views
12 Pages

Bessel Picosecond Laser Cutting Glass-Ceramics: Optimization of Processing Point Spacing, Incident Power, and Burst Mode

  • Xinjian Pan,
  • Yunfei Duan,
  • Yi Song,
  • Cheng Peng and ,
  • Jinxuan Li,
  • Zhili Li,
  • Chunjian Deng,
  • Jianjun Yang,
  • Qingguo Gao and
  • Yi Cai
  • + 6 authors+ 1 author

30 May 2025

Recent advances in glass-ceramics research have expanded their applications in astronomy, optoelectronics, and laser systems. However, precision cutting technology remains challenging. This study optimized picosecond laser processing parameters for 6...

  • Article
  • Open Access
14 Citations
3,871 Views
12 Pages

1 September 2020

Depending on the application of bismuth telluride thermoelectric materials in cooling, waste heat recovery, or wearable electronics, their material properties, and geometrical dimensions should be designed to optimize their performance. Recently, the...

(This article belongs to the Special Issue Advances in Thermoelectric Energy Harvesting and Power Generation)
  • Article
  • Open Access
3 Citations
3,336 Views
13 Pages

High-Quality Cutting of Soda–Lime Glass with Bessel Beam Picosecond Laser: Optimization of Processing Point Spacing, Incident Power, and Burst Mode

  • Jiaxuan Liu,
  • Jianjun Yang,
  • Hui Chen,
  • Jinxuan Li and ,
  • Decheng Zhang,
  • Jian Zhong and
  • Xinjian Pan
  • + 2 authors+ 0 author

25 February 2024

Soda–lime glass has a wide range of applications in the fields of smart electronics, optical components, and precision originals. In order to investigate the effect of processing parameters on picosecond Bessel laser cutting of soda–lime...

(This article belongs to the Section Optics and Lasers)
  • Article
  • Open Access
49 Citations
11,056 Views
12 Pages

An Investigation of Processes for Glass Micromachining

  • Nguyen Van Toan,
  • Masaya Toda and
  • Takahito Ono

22 March 2016

This paper presents processes for glass micromachining, including sandblast, wet etching, reactive ion etching (RIE), and glass reflow techniques. The advantages as well as disadvantages of each method are presented and discussed in light of the expe...

(This article belongs to the Special Issue Glass Micromachining)
  • Article
  • Open Access
4 Citations
4,064 Views
13 Pages

Melting Process and Viscosity of Bohemian Historical Glasses Studied on Model Glasses

  • Karolína Pánová,
  • Kristýna Jílková,
  • Dana Rohanová,
  • František Lahodný and ,
  • Dagmar Galusková and
  • Martin Míka
  • + 1 author+ 0 author

30 July 2021

Analyzing the chemical composition of archaeological glasses can provide an insight into their provenance and raw materials used in their making. However, to the authors’ knowledge, the historical production process itself and melting characteristics...

(This article belongs to the Special Issue Characterization of Archaeological and Historic Vitreous Materials)
  • Article
  • Open Access
2 Citations
4,113 Views
12 Pages

12 October 2024

Glass is one of the most common materials in society, and the float glass process is the main production method of glass used at present, which involves adopting a melting furnace with a single cooler. However, this structure has been difficult to fi...

(This article belongs to the Section Advanced and Functional Ceramics and Glasses)
  • Article
  • Open Access
4 Citations
4,055 Views
21 Pages

Two-Step Glass Molding Process for Forming Glass Edges with Obtuse Angles for Mobile Displays

  • Jeongyeon Park,
  • Sungho Chang,
  • Dongwon Lee,
  • Hyeonhwa Lee and ,
  • Bongchul Kang and
  • Jongsu Kim
  • + 1 author+ 0 author

29 June 2022

The domain of edge displays with 2.5D or 3D curved designs has been expanded to improve user convenience. The currently available 3D cover glass offers a limited curvature radius of at least 5 mm and a curvature less than 88°, due to limitations...

(This article belongs to the Special Issue Ultra-Precision Manufacturing Technology)
  • Article
  • Open Access
15 Citations
6,441 Views
11 Pages

23 February 2017

This paper investigates the formation process of a typical microstructure in the glass microfluidic chip, i.e., cuboid microprotrusion, by the soda-lime glass molding process (GMP). The finite element models on the platform Abaqus/Standard were estab...

(This article belongs to the Special Issue Optofluidics 2016)
  • Review
  • Open Access
79 Citations
17,774 Views
42 Pages

15 June 2021

Minerals able to colour in blue (and green in combination with yellow pigments) are limited in number and geologically. After presenting a short history of the use of cobalt as a colouring agent of glass, glaze and enamel in the Western/Mediterranean...

(This article belongs to the Special Issue Characterization of Archaeological and Historic Vitreous Materials)
  • Article
  • Open Access
75 Citations
10,483 Views
15 Pages

Compared with polymer-based biochips, such as polydimethylsiloxane (PDMS), glass based chips have drawn much attention due to their high transparency, chemical stability, and good biocompatibility. This paper investigated the glass molding process (G...

(This article belongs to the Special Issue Glassy Materials Based Microdevices)
  • Article
  • Open Access
8 Citations
6,007 Views
13 Pages

A Glass–Ultra-Thin PDMS Film–Glass Microfluidic Device for Digital PCR Application Based on Flexible Mold Peel-Off Process

  • Yanming Xia,
  • Xianglong Chu,
  • Caiming Zhao,
  • Nanxin Wang and ,
  • Juan Yu,
  • Yufeng Jin,
  • Lijun Sun and
  • Shenglin Ma
  • + 3 authors+ 0 author

4 October 2022

The microfluidic device (MFD) with a glass–PDMS–glass (G-P-G) structure is of interest for a wide range of applications. However, G-P-G MFD fabrication with an ultra-thin PDMS film (especially thickness less than 200 μm) is still a big...

(This article belongs to the Topic Advances in Microfluidics and Lab on a Chip Technology)
  • Article
  • Open Access
20 Citations
4,388 Views
17 Pages

Fe-Based Metallic Glasses and Dyes in Fenton-Like Processes: Understanding Their Intrinsic Correlation

  • Xueqing Wang,
  • Qiaoyue Zhang,
  • Shun-Xing Liang,
  • Zhe Jia and ,
  • Wenchang Zhang,
  • Weimin Wang and
  • Lai-Chang Zhang
  • + 2 authors+ 0 author

1 January 2020

Fe-based metallic glasses have been demonstrated as effective heterogeneous catalysts in Fenton-like processes for dye degradation. Yet, currently corresponding studies have limitations due to the limited study object (dyes) and the correlation betwe...

  • Article
  • Open Access
8 Citations
4,063 Views
11 Pages

28 February 2019

Among the various methods used for glass edge sealing, this study uses microwaves to seal glass edges. Through basic experiments, the main process conditions for edge sealing of glass were derived, and the experimental plan and analysis were carried...

(This article belongs to the Special Issue Energy Efficiency in Buildings and Innovative Materials for Building Construction)
  • Article
  • Open Access
2 Citations
2,979 Views
13 Pages

14 April 2023

Gas electron multipliers (GEMs) have been widely used for particle collection and signal amplification. Because of the advantages of glass, such as high hardness, aging resistance, and dielectric strength, research into its application as a substrate...

  • Article
  • Open Access
27 Citations
7,283 Views
9 Pages

25 April 2016

This paper presents a process for the fabrication of vacuum-sealed capacitive micromachined ultrasonic transducer (CMUT) arrays using glass reflow and anodic bonding techniques. Silicon through-wafer interconnects have been investigated by the glass...

(This article belongs to the Special Issue Glass Micromachining)
  • Article
  • Open Access
8 Citations
4,331 Views
16 Pages

2 December 2020

Recently, anti-glare (AG) surface treatment technology has been considered as a standard process to enhance the visibility of electronic display devices. For AG, the hydrofluoric acid (HF)-based chemical etch method is the most common approach for th...

(This article belongs to the Special Issue Control of Nonlinear Systems and Industrial Processes)
  • Article
  • Open Access
8 Citations
4,380 Views
15 Pages

Porous Lithium Disilicate Glass–Ceramics Prepared by Cold Sintering Process Associated with Post-Annealing Technique

  • Xigeng Lyu,
  • Yeongjun Seo,
  • Do Hyung Han,
  • Sunghun Cho and ,
  • Yoshifumi Kondo,
  • Tomoyo Goto and
  • Tohru Sekino
  • + 2 authors+ 0 author

12 January 2024

Using melt-derived LD glass powders and 5–20 M NaOH solutions, porous lithium disilicate (Li2Si2O5, LD) glass–ceramics were prepared by the cold sintering process (CSP) associated with the post-annealing technique. In this novel technique...

(This article belongs to the Special Issue Glassy Materials: From Preparation to Application)
  • Article
  • Open Access
22 Citations
4,961 Views
14 Pages

Large-area nanostructuring of glasses using intense laser beams is a challenging task due to the material’s extreme non-linear absorption of laser energy. Precise optimization of the process parameters is essential for fabricating nanostructure...

(This article belongs to the Section Optical Interaction Science)
  • Article
  • Open Access
13 Citations
3,875 Views
12 Pages

1 December 2020

An europium doped BaO–B2O3–BaCl2 chloroborate glass-ceramic containing a BaCl2 nanocrystalline phase was produced by melt-quenching followed by glass crystallization during annealing. Structural and morphological investigations using x-ra...

(This article belongs to the Special Issue Glass-Ceramics: Improving Glass Properties through Crystallization)
  • Article
  • Open Access
645 Views
27 Pages

Simulation and Experimental Study on Parameter Optimization for the Glass Molding Process of Automotive Panoramic Roofs

  • Ruili Wang,
  • Hongyan Wang,
  • Na Xiao,
  • Zihao Hu and ,
  • Wenjun Tong,
  • Xiaohong Yang and
  • Wuyi Ming
  • + 2 authors+ 0 author

20 June 2026

The automotive panoramic roof exhibits a large-size and thin-wall geometry, with a length-to-thickness ratio approaching the thousand level. This geometric feature makes its forming quality highly sensitive to forming conditions. During the glass mol...

(This article belongs to the Section Advanced and Functional Ceramics and Glasses)
  • Review
  • Open Access
14 Citations
3,560 Views
53 Pages

Effects of Process Parameters on Pulsed Laser Micromachining for Glass-Based Microfluidic Devices

  • Mrwan Alayed,
  • Nojoud Al Fayez,
  • Salman Alfihed,
  • Naif Alshamrani and
  • Fahad Alghannam

5 June 2025

Glass-based microfluidic devices are essential for applications such as diagnostics and drug discovery, which utilize their optical clarity and chemical stability. This review systematically analyzes pulsed laser micromachining as a transformative te...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
11 Citations
3,605 Views
12 Pages

Enhancing the Plasma-Resistance Properties of Li2O–Al2O3–SiO2 Glasses for the Semiconductor Etch Process via Alkaline Earth Oxide Incorporation

  • So-Won Kim,
  • Hwan-Seok Lee,
  • Deok-Sung Jun,
  • Seong-Eui Lee and ,
  • Joung-Ho Lee and
  • Hee-Chul Lee
  • + 1 author+ 0 author

20 July 2023

To develop plasma-resistant glass materials suitable for semiconductor etching processes, we introduced alkaline earth oxides (ROs) into a Li2O–Al2O3–SiO2 (LAS) glass. Analysis of glass properties with respect to the additives revealed th...

(This article belongs to the Section Electronic Materials)
  • Article
  • Open Access
3,386 Views
15 Pages

Continuous Feed Grinding Milling Process of Soda-Lime Glass Using Smoothed-Particle Hydrodynamics

  • Joshua Alamo,
  • Jameson Pitcheralle,
  • Craig G. Merrett,
  • Michael C. F. Bazzocchi and
  • Marcias Martinez

23 January 2024

A smoothed-particle hydrodynamics (SPH) modeling technique was applied in conjunction with the Johnson–Holmquist (JH-2) ceramic material constitutive model to replicate the fracture of soda-lime glass in a milling manufacturing process. Four-po...

  • Review
  • Open Access
1,198 Views
28 Pages

Towards High-Strength Transparent Glass-Ceramics: Processing, Microstructure, and Applications

  • Ivan Veselov,
  • Georgiy Shakhgildyan,
  • Kirill Tregubov,
  • Daniil Vinogradov and
  • Vladimir Sigaev

Glass-ceramics are inorganic, non-metallic materials obtained by controlled crystallization of glasses through different processing routes; they contain at least one functional crystalline phase together with a residual glass, and the crystallized fr...

(This article belongs to the Section Material Sciences)
  • Article
  • Open Access
2 Citations
3,320 Views
10 Pages

Effects of CeO2 and Sb2O3 on the Nonlinear Photochemical Process in Ultrashort Laser Gaussian—Bessel Beams Irradiated Photo—Thermo—Refractive Glass

  • Xu Wang,
  • Guodong Zhang,
  • Guangying Li,
  • Rui Lou and ,
  • Zhe Sun,
  • Xiaoping Xie,
  • Weinan Li and
  • Guanghua Cheng
  • + 3 authors+ 0 author

Microfluidic chips and optical elements can be fabricated based on the nonlinear photosensitivity in photo–thermo–refractive (PTR) glass by controlling the growth of nanocrystals in the femtosecond (fs) laser–irradiated region. Here, we focus on CeO2...

  • Article
  • Open Access
3 Citations
2,858 Views
16 Pages

Processing, Characterization, and Oxidation Resistance of Glass-Ceramic Coating on CoSb3

  • Kinga M. Zawadzka,
  • Fabiana D’Isanto,
  • Krzysztof Mars,
  • Federico Smeacetto and
  • Milena Salvo

27 May 2023

Power generation based on thermoelectric (TE) materials is very attractive due to its low environmental impact and waste heat recovery. Thermoelectric materials based on cobalt triantimonide CoSb3 exhibit one of the highest energy conversion efficien...

(This article belongs to the Special Issue Hot Corrosion and Oxidation of Alloys)
  • Article
  • Open Access
3 Citations
2,473 Views
27 Pages

28 September 2025

This study comprehensively discusses the effect of multiple material recycling (five recycling cycles with the same technological conditions: injection molding → grinding → drying → injection molding → …) of commercial poly...

(This article belongs to the Special Issue Recycling of Engineering Polymers: Process and Physico-Chemical Changes)
  • Article
  • Open Access
8 Citations
5,235 Views
17 Pages

Picosecond Laser Processing of Photosensitive Glass for Generation of Biologically Relevant Microenvironments

  • Florin Jipa,
  • Stefana Orobeti,
  • Cristian Butnaru,
  • Marian Zamfirescu and ,
  • Emanuel Axente,
  • Felix Sima and
  • Koji Sugioka
  • + 2 authors+ 0 author

15 December 2020

Various material processing techniques have been proposed for fabrication of smart surfaces that can modulate cellular behavior and address specific clinical issues. Among them, laser-based technologies have attracted growing interest due to processi...

(This article belongs to the Special Issue Biomimetic Laser Processing Part II)
  • Article
  • Open Access
3 Citations
3,104 Views
14 Pages

Influence of Exposure Parameters on Nanoliquid-Assisted Glass Drilling Process Using CO2 Laser

  • Mohaimen Najah Mahdi,
  • Ahmed Issa,
  • Hala Salman Hasan,
  • Ahmed R. Al-Hamaoy and
  • Muammel M. Hanon

13 January 2023

Liquid-assisted laser processing (LALP) is implemented using a 10.6 μm continuous-wave (CW) CO2 laser to drill holes in 1.1 mm thick soda-lime glass substrates fully immersed in a nanoliquid bath. The nanoliquid bath consisted of de-ionized water...

(This article belongs to the Topic Applications of Photonics, Laser, Plasma and Radiation Physics)
  • Article
  • Open Access
4 Citations
4,126 Views
15 Pages

2 January 2022

In this study, the vibration and sound response characteristics of composites produced via injection molding applied with a microcellular foaming process (MCPs) were improved. The study was conducted using PA6 and glass fiber composites, which are re...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
10 Citations
5,121 Views
19 Pages

18 May 2018

During the production of fiber-reinforced composite materials, liquid resin is introduced into the fiber material and cured, i.e., hardened. An elevated temperature is needed for this curing. Microwave curing of composites has been investigated for s...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
5 Citations
5,121 Views
13 Pages

Bioactive glass (BG) nanoparticles have wide applications in bone repair due to their bone-bonding and biodegradable nature. In this work, nanometric rod-shaped ternary SiO2-CaO-P2O5 bioactive glass particles were prepared through sol-gel chemistry f...

(This article belongs to the Special Issue Bioceramics and Bioactive Glass-Based Materials)
  • Article
  • Open Access
12 Citations
4,838 Views
21 Pages

14 December 2024

Filament winding is a widely used out-of-autoclave manufacturing technique for producing continuous fiber-reinforced thermoplastic composites. This study focuses on optimizing key filament winding process parameters, including heater temperature, rol...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
9 Citations
3,585 Views
13 Pages

Influence of Processing Route on the Surface Reactivity of Cu47Ti33Zr11Ni6Sn2Si1 Metallic Glass

  • Erika Soares Barreto,
  • Volker Uhlenwinkel,
  • Maximilian Frey,
  • Isabella Gallino and ,
  • Ralf Busch and
  • Andreas Lüttge
  • + 1 author+ 0 author

23 July 2021

Recently, laser additive manufacturing (AM) techniques have emerged as a promising alternative for the synthesis of bulk metallic glasses (BMGs) with massively increased freedom in part size and geometry, thus extending their economic applicability o...

  • Article
  • Open Access
17 Citations
8,597 Views
23 Pages

13 June 2017

The interphase in short fiber thermoplastic composites is defined as a three-dimensional, several hundred nanometers-wide boundary region at the interface of fibers and the polymer matrix, exhibiting altered mechanical properties. This region is of k...

  • Article
  • Open Access
300 Views
22 Pages

Filter-Coupled Heteroscedastic Gaussian Process Regression for S–N Curve Prediction of Injection-Molded Short Glass-Fiber-Reinforced Thermoplastics

  • Jorge Jiménez-Armendáriz,
  • Mariel Alfaro-Ponce,
  • Cristopher A. Muñoz-Ibañez and
  • Moises Jimenez-Martinez

23 October 2026

Predicting the fatigue behavior of injection-moulded short glass-fiber-reinforced thermoplastics is hindered by the large, irreducible scatter of fatigue data and by the strong dependence of the response on the moulding conditions, which conventional...

(This article belongs to the Section Polymer Analysis and Characterization)
  • Article
  • Open Access

16 November 2026

The growing demand for more sustainable composite materials has encouraged the development of alternative reinforcement systems and the use of partially bio-based polymer matrices. Basalt fibers, manufactured from naturally occurring volcanic rock, r...

(This article belongs to the Special Issue Durability and Reliability of Sustainable Materials: Mechanisms, Applications, and Future Directions)
  • Article
  • Open Access
3 Citations
1,426 Views
16 Pages

23 September 2025

Significant pre-consumer waste in the form of runners is generated during the injection molding of high-performance automotive components, representing both a substantial economic loss and an environmental burden. This study therefore comprehensively...

(This article belongs to the Special Issue Modeling and Characterization of Recycled High-Performance Polymer Materials)
  • Article
  • Open Access
27 Citations
8,717 Views
20 Pages

A Scale-up of Energy-Cycle Analysis on Processing Non-Woven Flax/PLA Tape and Triaxial Glass Fibre Fabric for Composites

  • Gilles Tchana Toffe,
  • Sikiru Oluwarotimi Ismail,
  • Diogo Montalvão,
  • Jason Knight and
  • Guogang Ren

In the drive towards a sustainable bio-economy, a growing interest exists in the development of composite materials using renewable natural resources. This paper explores the life cycle assessment of processing of Flax fibre reinforced polylactic aci...

  • Article
  • Open Access
90 Citations
13,766 Views
14 Pages

7 June 2021

We propose a chemical language processing model to predict polymers’ glass transition temperature (Tg) through a polymer language (SMILES, Simplified Molecular Input Line Entry System) embedding and recurrent neural network. This model only receives...

(This article belongs to the Section Polymer Physics and Theory)
  • Article
  • Open Access
2 Citations
2,299 Views
15 Pages

Surface Post-Treatment Induced by Nanosecond Pulsed Laser Processing of HVAF-Sprayed Fe-Based Metallic Glass Coating

  • Xianshun Wei,
  • Zongyi Liao,
  • Shaochong Wei,
  • Guoxing Chen and ,
  • Haifeng Lu,
  • Yan Liang,
  • Mingwei Cai and
  • Jun Shen
  • + 3 authors+ 0 author

23 October 2022

The effects of nanosecond pulsed laser processing (NPLP) on the surface morphology, microstructure, and corrosion resistance properties of Fe-based metallic glass coating were investigated. It was found that after pulsed laser processing, the metalli...

(This article belongs to the Section Corrosion and Protection)
  • Article
  • Open Access
91 Citations
16,628 Views
15 Pages

The Global Land Surface Satellite (GLASS) Remote Sensing Data Processing System and Products

  • Xiang Zhao,
  • Shunlin Liang,
  • Suhong Liu,
  • Wenping Yuan and ,
  • Zhiqiang Xiao,
  • Qiang Liu,
  • Jie Cheng,
  • Xiaotong Zhang,
  • Hairong Tang and
  • Kai Yu
  • + 9 authors+ 4 authors

15 May 2013

Using remotely sensed satellite products is the most efficient way to monitor global land, water, and forest resource changes, which are believed to be the main factors for understanding global climate change and its impacts. A reliable remotely sens...

  • Review
  • Open Access
447 Views
18 Pages

Aluminum- and zirconium-based amorphous alloys occupy complementary positions in metallic glass research. This review compares these two alloy families within a common framework that links thermodynamic and kinetic glass-forming criteria, crystalliza...

  • Article
  • Open Access
6 Citations
2,907 Views
9 Pages

Low-emissivity glass has high transmission in the visible region and high reflectivity in the infrared region. Gallium and aluminum codoped zinc oxide (GAZO) processed by hydrogen (H2) plasma treatment holds promise for fabricating good low-emissivit...

(This article belongs to the Special Issue Manufacturing and Properties of New Special Glass- and Ceramic-Based Composites)
  • Article
  • Open Access
5 Citations
2,545 Views
28 Pages

12 July 2023

This paper discusses the mixing of polylactide (PLA) and glass fiber which use injection molding to produce a functional composite material with glass fiber properties. The injection molding process explores the influence of glass fiber ratio, melt t...

(This article belongs to the Special Issue Injection Molding Process in Polymer Processing)
  • Article
  • Open Access
1 Citations
1,113 Views
11 Pages

Processing Maps and Nano-IR Diagnostics of Type I Modifications in Mid-IR Germanate-Based Optical Glass

  • Paul Mathieu,
  • Nadezhda Shchedrina,
  • Florence De La Barrière,
  • Guillaume Druart and
  • Matthieu Lancry

16 February 2026

Mid-IR flat/integrated optics require low-loss, programmable phase control. We investigate femtosecond laser direct writing (FLDW) in aluminogermanate glass (Corning 9754), first mapping the processing landscape to delineate no modification, Type I i...

(This article belongs to the Special Issue Advances in Micro-Nano Optical Manufacturing)
  • Article
  • Open Access
1 Citations
1,511 Views
15 Pages

Low-Temperature Co-Sintering of Li-Glass Solid Electrolytes and Li-Glass/Graphite Composite Anodes via Hot Press Processing

  • Youngsun Ko,
  • Hanbyul Lee,
  • Wookyung Lee,
  • Jaeseung Choi and ,
  • Jungkeun Ahn,
  • Youngsoo Seo and
  • Chang-Bun Yoon
  • + 2 authors+ 0 author

With the expanding electric vehicle market, there is increasing demand for improved battery safety and fast-charging performance. Ceramic-based solid electrolytes have attracted attention due to their high thermal and electrochemical stabilities. Li-...

(This article belongs to the Special Issue Structure and Component-Designed Functional Materials for Electrochemical Application)

of 100