Skip to Content

716 Results Found

  • Technical Note
  • Open Access
9 Citations
6,467 Views
9 Pages

The Prototype of a Fast Vertical Ionosonde Based on Modern Software-Defined Radio Devices

  • Alexei V. Shindin,
  • Sergey P. Moiseev,
  • Fedor I. Vybornov,
  • Kseniya K. Grechneva and ,
  • Viktoriya A. Pavlova and
  • Vladimir R. Khashev
  • + 1 author+ 0 author

24 January 2022

The description and test results of the prototype of a fast ionosonde for the vertical sounding of the ionosphere, which makes it possible to record ionograms once a second, are presented. Such a high rate of registration of ionograms is required to...

(This article belongs to the Special Issue Ionosphere Monitoring with Remote Sensing)
  • Article
  • Open Access
11 Citations
6,264 Views
19 Pages

A Virtual Prototype for Fast Design and Visualization of Gerotor Pumps

  • Juan Pareja-Corcho,
  • Aitor Moreno,
  • Bruno Simoes,
  • Asier Pedrera-Busselo and ,
  • Ekain San-Jose,
  • Oscar Ruiz-Salguero and
  • Jorge Posada
  • + 2 authors+ 0 author

28 January 2021

In the context of generation of lubrication flows, gear pumps are widely used, with gerotor-type pumps being specially popular, given their low cost, high compactness, and reliability. The design process of gerotor pumps requires the simulation of th...

(This article belongs to the Special Issue Digital Twins in Industry)
  • Article
  • Open Access
1 Citations
2,986 Views
13 Pages

Design and Initial Tests of a Fast Neutron Radiography Detector Prototype with Silicon Photomultiplier Readouts

  • Xu Chen,
  • Bin Tang,
  • Ruofu Chen,
  • Zhifu Zhu and ,
  • Pingchuan Zhang,
  • Qian Yu,
  • Chang Huang,
  • Shaojia Chen,
  • Xiuku Wang and
  • Yuntao Liu
  • + 11 authors+ 6 authors

26 June 2024

Among non-destructive testing (NDT) techniques, fast neutron radiography with a higher penetration capability has achieved rapid advancements. However, the application of the radiography detector in many fast neutron imaging systems is limited by unf...

(This article belongs to the Section Optics and Lasers)
  • Proceeding Paper
  • Open Access
1,571 Views
7 Pages

Public touchscreens, such as those used in automated teller machines or ticket payment systems, which are accessed by different people in a short period of time, could transmit pathogens and thus spread infections. Therefore, the aim of this study wa...

(This article belongs to the Proceedings of The 1st International Online Conference on Photonics)
  • Article
  • Open Access
51 Citations
11,481 Views
15 Pages

7 April 2015

The unibody lab-on-a-chip (ULOC) concept entails a fast and affordable micro-prototyping system built around a single monolithic 3D printed element (unibody). A consumer-grade stereo lithography (SL) 3D printer can configure ULOCs with different for...

(This article belongs to the Special Issue Selected Papers from the 2nd International Conference on Microfluidic Handling Systems)
  • Article
  • Open Access
7 Citations
6,358 Views
22 Pages

8 May 2019

There are various uncertain factors such as parameter perturbation and external disturbance during the steering process of a permanent magnet slip clutch electronically controlled hydraulic power steering system (P-ECHPS) of medium and heavy duty veh...

(This article belongs to the Special Issue Adaptive Fuzzy Control)
  • Article
  • Open Access
3,191 Views
24 Pages

The emergent field of embedded computing presents a challenging scenario for ubiquitous music (ubimus) design. Available tools demand specific technical knowledge—as exemplified in the techniques involved in programming integrated circuits of c...

  • Article
  • Open Access
13 Citations
10,454 Views
10 Pages

21 April 2017

The k-means is one of the most popular and widely used clustering algorithm; however, it is limited to numerical data only. The k-prototypes algorithm is an algorithm famous for dealing with both numerical and categorical data. However, there have be...

(This article belongs to the Special Issue Scientific Programming in Practical Symmetric Big Data)
  • Article
  • Open Access
7 Citations
5,252 Views
24 Pages

REIP: A Reconfigurable Environmental Intelligence Platform and Software Framework for Fast Sensor Network Prototyping

  • Yurii Piadyk,
  • Bea Steers,
  • Charlie Mydlarz,
  • Mahin Salman and ,
  • Magdalena Fuentes,
  • Junaid Khan,
  • Hong Jiang,
  • Kaan Ozbay,
  • Juan Pablo Bello and
  • Claudio Silva
  • + 5 authors+ 0 author

17 May 2022

Sensor networks have dynamically expanded our ability to monitor and study the world. Their presence and need keep increasing, and new hardware configurations expand the range of physical stimuli that can be accurately recorded. Sensors are also no l...

(This article belongs to the Topic Wireless Sensor Networks)
  • Article
  • Open Access
12 Citations
8,415 Views
27 Pages

Customizable Optical Force Sensor for Fast Prototyping and Cost-Effective Applications

  • Jorge A. Díez,
  • José M. Catalán,
  • Andrea Blanco,
  • José V. García-Perez and ,
  • Francisco J. Badesa and
  • Nicolás Gacía-Aracil
  • + 1 author+ 0 author

7 February 2018

This paper presents the development of an optical force sensor architecture directed to prototyping and cost-effective applications, where the actual force requirements are still not well defined or the most suitable commercial technologies would hig...

(This article belongs to the Special Issue State-of-the-Art Sensors Technology in Spain 2017)
  • Article
  • Open Access
1,942 Views
13 Pages

Fast Prototyping Ceramic Gas Flow Sensors for Harsh Operating Conditions

  • Andrey Kasenko,
  • Pavel Shchur,
  • Ekaterina Anatolevna Drach,
  • Ivan Borzunov and ,
  • Vasily V. Egorov,
  • Boris Prudnikov,
  • Konstantin Oblov,
  • Arthur Litvinov,
  • Yuri Voronov and
  • Nikolay Samotaev
  • + 5 authors+ 0 author

30 January 2026

The technology development for the mass ceramic gas flow sensor (CGFS) adopted for harsh operating conditions is presented. The main characteristic of this technology is its simplicity and affordability for mass fast prototyping of CGFS with a limite...

(This article belongs to the Special Issue Gas Sensors and Electronic Noses)
  • Article
  • Open Access
9 Citations
7,858 Views
11 Pages

Fast Prototyping of Sensorized Cell Culture Chips and Microfluidic Systems with Ultrashort Laser Pulses

  • Sebastian M. Bonk,
  • Paul Oldorf,
  • Rigo Peters,
  • Werner Baumann and
  • Jan Gimsa

23 March 2015

We developed a confined microfluidic cell culture system with a bottom plate made of a microscopic slide with planar platinum sensors for the measurement of acidification, oxygen consumption, and cell adhesion. The slides were commercial slides with...

  • Article
  • Open Access
1 Citations
2,169 Views
26 Pages

Through-Hole Buck Converters for Fast Prototyping: A Comparative Study

  • Jose Vicente Muñoz,
  • Luis M. Nieto-Nieto,
  • Luis Pulido-Lopez,
  • Juan D. Aguilar-Peña and
  • Angel Gaspar Gonzalez-Rodriguez

The increasing demand for emerging applications like IoT or drones has boosted the interest of industry and academia in DC-DC converters. Due to their high performance, non-isolated buck DC-DC converters have become one of the most common configurati...

(This article belongs to the Special Issue Power Electronics and Its Applications in Power System)
  • Article
  • Open Access
1 Citations
2,063 Views
36 Pages

13 July 2023

Computer-interpretable Guideline (CIG) systems are important tools for ensuring healthcare practice quality and standardization. They usually provide a tool to acquire CIGs, and one to execute them on specific patients. Current CIG systems rely on th...

(This article belongs to the Special Issue Methods, Applications and Developments in Biomedical Informatics)
  • Article
  • Open Access
1 Citations
2,028 Views
22 Pages

22 November 2024

This paper aims to report the design of a mechanism to drive a propeller to deform between an aerial and one aquatic shape. This mechanism can realize the deformation of blade angle, radius, blade twist angle distribution and blade section thickness....

(This article belongs to the Section Machine Design and Theory)
  • Article
  • Open Access
550 Views
25 Pages

Intelligent System for Monitoring Shrimp Farming Ponds

  • Gary Reyes,
  • Roberto Tolozano-Benites,
  • Denisse Alarcón-Rubio,
  • Rosendo Nieto-Tóala and ,
  • Laura Lanzarini,
  • Waldo Hasperué,
  • Dayron Rumbaut,
  • Julio Barzola-Monteses and
  • Carlos Enrique George-Reyes
  • + 4 authors+ 0 author

20 August 2026

Shrimp farming is a strategic productive activity for Ecuador; however, pond inspection still substantially depends on manual observation and fragmented visual records. This study describes a prototype mobile/web architecture for image capture, stora...

(This article belongs to the Section Computing and Artificial Intelligence)
  • Article
  • Open Access
4 Citations
6,756 Views
46 Pages

The integration of diverse robotic platforms with varying payload capacities is a critical challenge in swarm robotics and autonomous systems. This paper presents a robust, modular framework designed to manage and coordinate heterogeneous swarms of a...

(This article belongs to the Special Issue Advances in UAV Technology: Dynamics, Guidance, Navigation, and Control of Transformative Aerial Vehicles)
  • Article
  • Open Access
56 Citations
11,423 Views
23 Pages

A Smart and Secure Logistics System Based on IoT and Cloud Technologies

  • Ilaria Sergi,
  • Teodoro Montanaro,
  • Fabrizio Luca Benvenuto and
  • Luigi Patrono

23 March 2021

Recently, one of the hottest topics in the logistics sector has been the traceability of goods and the monitoring of their condition during transportation. Perishable goods, such as fresh goods, have specifically attracted attention of the researcher...

(This article belongs to the Section Internet of Things)
  • Article
  • Open Access
2 Citations
2,783 Views
16 Pages

ION-FAST as the NIRFI’s Ionospheric Diagnostic Platform

  • Sergey P. Moiseev,
  • Alexei V. Shindin,
  • Kseniya K. Grekhneva,
  • Viktoriya A. Pavlova and
  • Nikita S. Timukin

1 February 2024

In December 2021, we presented a prototype of a fast ionosonde for vertical sounding based on the usage of publicly available radio-electronic components. This approach led to a major reduction in the cost of the created device. We called our develop...

(This article belongs to the Section Atmospheric Techniques, Instruments, and Modeling)
  • Proceeding Paper
  • Open Access
400 Views
10 Pages

Virtual Prototyping and Evaluation of Hydro Plant System with Crossflow Turbine

  • Konstantin Kamberov,
  • Georgi Todorov and
  • Blagovest Zlatev

The study presents an application of virtual prototyping and numerical analysis in engineering practice for an in-stream hydropower system. The performed analyses aimed to compare different design configurations of the crossflow turbine. All simulati...

(This article belongs to the Proceedings of The 15th International Scientific Conference TechSys 2026—Engineering, Technologies and Systems)
  • Article
  • Open Access
2 Citations
2,857 Views
15 Pages

21 January 2025

The resource-constrained MCU-based platform is unable to use high-performance accelerators such as GPUs or servers due to insufficient resources for ML applications. We define a Micro-Accelerator (MA) that can accelerate ML operations by being connec...

(This article belongs to the Section Computing and Artificial Intelligence)
  • Article
  • Open Access
32 Citations
6,869 Views
12 Pages

Fast Prototyping Microfluidics: Integrating Droplet Digital Lamp for Absolute Quantification of Cancer Biomarkers

  • Beatriz Oliveira,
  • Bruno Veigas,
  • Alexandra R. Fernandes,
  • Hugo Águas and ,
  • Rodrigo Martins,
  • Elvira Fortunato and
  • Pedro Viana Baptista
  • + 2 authors+ 0 author

14 March 2020

Microfluidic (MF) advancements have been leveraged toward the development of state-of-the-art platforms for molecular diagnostics, where isothermal amplification schemes allow for further simplification of DNA detection and quantification protocols....

(This article belongs to the Section Biosensors)
  • Article
  • Open Access
5 Citations
4,185 Views
20 Pages

IoT Helper: A Lightweight and Extensible Framework for Fast-Prototyping IoT Architectures

  • Giansalvatore Mecca,
  • Michele Santomauro,
  • Donatello Santoro and
  • Enzo Veltri

17 October 2021

Industry 4.0 is focused on the task of creating Smart Factories, which require the automation of traditional industrial processes and the fully connection and integration of different systems and devices. However, despite the wide availability of too...

(This article belongs to the Special Issue Focus on Integrated Collaborative Systems for Smart Factory)
  • Article
  • Open Access
16 Citations
3,696 Views
15 Pages

This paper proposes a low-cost on-chip Hardware-in-the-Loop (HIL) platform for teaching and fast prototyping of dynamic systems. A dual-core digital signal controller (DSC)-based solution is proposed for the HIL system. CPU core A, as the simulation...

(This article belongs to the Section Industrial Electronics)
  • Article
  • Open Access
161 Views
20 Pages

Voltage-Disturbance Identification and Fast Transfer Control of an IGCT-Based Hybrid Solid-State Transfer Switch

  • Bin Zhao,
  • Ruoxi Liu,
  • Hanqi Dai,
  • Zexi Chen and ,
  • Dawei Wang and
  • Pu Wang
  • + 1 author+ 0 author

30 October 2026

Voltage disturbances in power distribution networks can interrupt power supply to sensitive loads, thus requiring fast and reliable power switching. For low-voltage distribution networks, this study proposes a hybrid solid-state transfer switch based...

(This article belongs to the Section Industrial Sensors)
  • Proceeding Paper
  • Open Access
1 Citations
2,791 Views
5 Pages

Novel 3D-Printed MEMS Magnetometer with Optical Detection

  • Matthias Kahr,
  • Wilfried Hortschitz,
  • Harald Steiner,
  • Michael Stifter and ,
  • Andreas Kainz and
  • Franz Keplinger
  • + 1 author+ 0 author

23 November 2018

This paper reports a novel 3D printed MEMS magnetometer with optical readout, which demonstrates the advantages of 3D printing technology in terms of rapid prototyping. Low-cost and fast product development cycles favour 3D printing as an effective t...

(This article belongs to the Proceedings of EUROSENSORS 2018)
  • Article
  • Open Access
4,651 Views
16 Pages

A Sensor Employing an Array of Silicon Photomultipliers for Detection of keV Ions in Time-of-Flight Mass Spectrometry

  • Antonio Mariscal-Castilla,
  • Markus Piller,
  • Jerome Alozy,
  • Rafael Ballabriga and ,
  • Michael Campbell,
  • Oscar de la Torre,
  • David Gascón,
  • Sergio Gómez,
  • David Heathcote and
  • Daniel Guberman
  • + 9 authors+ 4 authors

5 March 2025

Pixellated scintillation detectors have the potential to overcome several limitations of conventional microchannel-plate-based detectors employed in time-of-flight mass spectrometry (ToF-MS), such as extending detector lifetime, reducing vacuum requi...

(This article belongs to the Special Issue Advanced Silicon Photomultiplier Based Sensors)
  • Article
  • Open Access
2 Citations
1,384 Views
22 Pages

18 September 2025

Rapid prototyping methods have gained increasing interest across various industries in recent years. Among these methods, 3D printing technology is increasingly used for prototype production, mainly due to its relatively low development and manufactu...

(This article belongs to the Special Issue Computational and Experimental Modeling of Interfaces and Joints in Advanced Materials)
  • Article
  • Open Access
5 Citations
4,118 Views
26 Pages

7 February 2025

Striving for better simulation results, transport planners want to simulate larger domains with increased levels of detail. Achieving fast execution times for these complex traffic simulations requires the parallel computing power of modern hardware....

(This article belongs to the Special Issue Emerging Research in Urban Computing and Intelligent Transport Systems)
  • Article
  • Open Access
25 Citations
5,892 Views
26 Pages

Design and Implementation of a DC–DC Resonant LLC Converter for Electric Vehicle Fast Chargers

  • Joao Rocha,
  • Saghir Amin,
  • Sergio Coelho,
  • Gonçalo Rego and ,
  • Joao L. Afonso and
  • Vitor Monteiro
  • + 1 author+ 0 author

24 February 2025

This article presents the design and implementation of a DC–DC power converter for application in electric vehicle (EV) fast-charging systems. The prototype is of the resonant LLC type and consists of a high-power transformer operating at high...

(This article belongs to the Special Issue Advanced Power Electronic Converters for Electric Vehicles, Renewable Energy Systems, and Energy Storage Systems)
  • Feature Paper
  • Article
  • Open Access
2 Citations
5,017 Views
15 Pages

Design of a Mass Air Flow Sensor Employing Additive Manufacturing and Standard Airfoil Geometry

  • Dimitrios-Nikolaos Pagonis,
  • Vasiliki Benaki,
  • Grigoris Kaltsas and
  • Antonios Pagonis

7 December 2021

This work concerns the design, fabrication, and preliminary characterization of a novel sensor for determining the air intake of low and medium power internal combustion engines employed at various applications in the marine industry. The novelty of...

(This article belongs to the Special Issue Sensors and Measurement Systems for Marine Engineering Applications)
  • Article
  • Open Access
37 Citations
11,745 Views
14 Pages

26 September 2017

High-voltage positive temperature coefficient (PTC) heaters have a high heating capacity and are fast acting; thus, they function as the actual main heating equipment in electric cars, and considerable research is devoted to improving their heating p...

(This article belongs to the Special Issue Thermal Energy Storage and Thermal Management (TESM2017))
  • Article
  • Open Access
28 Citations
7,917 Views
35 Pages

UAV-Based and WebRTC-Based Open Universal Framework to Monitor Urban and Industrial Areas

  • Agnieszka Chodorek,
  • Robert Ryszard Chodorek and
  • Paweł Sitek

12 June 2021

Nowadays, we are observing a rapid development of UAV-based monitoring systems, which are faced with more and more new tasks, such as high temporal resolution and high spatial resolution of measurements, or Artificial Intelligence on board. This pape...

(This article belongs to the Special Issue UAV-Based Technology for IoT)
  • Article
  • Open Access
24 Citations
5,051 Views
13 Pages

We report on studies of new gas sensing devices to be used in high humidity environments. Highly thermal-stable, super hydrophobic 2-dimensional (2D) boron nitride nanosheets (BNNSs) functionalized with Pt nanoparticles were prepared and used as an a...

  • Article
  • Open Access
13 Citations
5,329 Views
16 Pages

Broadband Circuit-Oriented Electromagnetic Modeling for Power Electronics: 3-D PEEC Solver vs. RLCG-Solver

  • Ivana Kovacevic-Badstuebner,
  • Daniele Romano,
  • Giulio Antonini,
  • Jonas Ekman and
  • Ulrike Grossner

14 May 2021

Broadband electromagnetic (EM) modeling increases in importance for virtual prototyping of advanced power electronics systems (PES), enabling a more accurate prediction of fast switching converter operation and its impact on energy conversion efficie...

(This article belongs to the Special Issue Electromagnetic Modeling in Power Electronics)
  • Article
  • Open Access
26 Citations
5,930 Views
14 Pages

In-House, Fast FDM Prototyping of a Custom Cutting Guide for a Lower-Risk Pediatric Femoral Osteotomy

  • Leonardo Frizziero,
  • Gian Maria Santi,
  • Christian Leon-Cardenas,
  • Giampiero Donnici and ,
  • Alfredo Liverani,
  • Paola Papaleo,
  • Francesca Napolitano,
  • Curzio Pagliari,
  • Giovanni Luigi Di Gennaro and
  • Paola Zarantonello
  • + 8 authors+ 3 authors

Three-dimensional printed custom cutting guides (CCGs) are becoming more and more investigated in medical literature, as a patient-specific approach is often desired and very much needed in today’s surgical practice. Three-dimensional printing applic...

  • Article
  • Open Access
33 Citations
9,372 Views
14 Pages

25 October 2018

This study aimed to find the correlation between conventional Arch Index (AI) measurements and our prototype of a simplified insole-based plantar pressure measurement system and to find out the effective plantar pressure sensor position. Twenty-one s...

(This article belongs to the Special Issue Sensors for Gait, Posture, and Health Monitoring)
  • Article
  • Open Access
1 Citations
2,269 Views
16 Pages

S3DK: An Open Source Toolkit for Prototyping Synchrophasor Applications

  • Maxime Baudette,
  • Luigi Vanfretti and
  • Shashank Tyagi

Synchrophasor data contain a trove of information on the power system and its dynamics. These measurements have a high potential to unlock our ability to cope with changing system conditions and challenges posed by distributed and intermittent energy...

(This article belongs to the Section Power Electronics)
  • Article
  • Open Access
35 Citations
5,345 Views
13 Pages

Design and Validation of Ultra-Fast Charging Infrastructures Based on Supercapacitors for Urban Public Transportation Applications

  • Fernando Ortenzi,
  • Manlio Pasquali,
  • Pier Paolo Prosini,
  • Alessandro Lidozzi and
  • Marco Di Benedetto

19 June 2019

The last few decades have seen a significant increase in the number of electric vehicles (EVs) for private and public transportation around the world. This has resulted in high power demands on the electrical grid, especially when fast and ultra-fast...

(This article belongs to the Special Issue Advances in Supercapacitor Technology and Applications)
  • Article
  • Open Access
17 Citations
4,205 Views
15 Pages

Development and Application of a 10 kV Mechanical DC Circuit Breaker

  • Lu Qu,
  • Zhanqing Yu,
  • Xiang Xiao,
  • Wei Zhao and ,
  • Yulong Huang and
  • Rong Zeng
  • + 1 author+ 0 author

22 September 2019

A DC circuit breaker is piece of core equipment for DC grid construction and can achieve fast isolation of DC faults in the grid. In this paper, based on the fault characteristics and protection requirements of an AC/DC hybrid distribution network, t...

  • Review
  • Open Access
31 Citations
6,951 Views
17 Pages

Fused Deposition Modelling of Polymeric Auxetic Structures: A Review

  • Davide Mocerino,
  • Maria Rosaria Ricciardi,
  • Vincenza Antonucci and
  • Ilaria Papa

17 February 2023

Additive Manufacturing (AM) techniques have recently attracted the attention of scientists for the development of prototypes with complex or particular geometry in a fast and cheap way. Among the different AM processes, the Fused Deposition Modelling...

(This article belongs to the Special Issue Polymers for Additive Manufacturing)
  • Article
  • Open Access
7 Citations
4,151 Views
11 Pages

Application of Tagged Neutron Method for Detecting Diamonds in Kimberlite

  • Yury Rogov,
  • Vladislav Kremenets,
  • Mikhail Sapozhnikov and
  • Motswakae Sebele

The results of testing a prototype of a separator for detecting diamonds in kimberlite ore using tagged neutron method are discussed. Kimberlite ore was irradiated with fast tagged neutrons with an energy of 14.1 MeV. The elemental content of the tra...

  • Article
  • Open Access
472 Views
23 Pages

10 August 2026

In aerospace applications, structural vibration can cause fatigue accumulation and shorten the service life of aircraft. This makes vibration suppression based on Macro Fiber Composite (MFC) piezoelectric composites an important research topic. Consi...

(This article belongs to the Special Issue Novel Sensors and Sensing Technology Used for Empowering High-End Equipment Structure)
  • Article
  • Open Access
11 Citations
9,168 Views
26 Pages

Motion-Blur-Free High-Speed Video Shooting Using a Resonant Mirror

  • Michiaki Inoue,
  • Qingyi Gu,
  • Mingjun Jiang,
  • Takeshi Takaki and ,
  • Idaku Ishii and
  • Kenji Tajima
  • + 1 author+ 0 author

29 October 2017

This study proposes a novel concept of actuator-driven frame-by-frame intermittent tracking for motion-blur-free video shooting of fast-moving objects. The camera frame and shutter timings are controlled for motion blur reduction in synchronization w...

(This article belongs to the Special Issue Video Analysis and Tracking Using State-of-the-Art Sensors)
  • Article
  • Open Access
6 Citations
4,791 Views
17 Pages

Combining Sensors Information to Enhance Pneumatic Grippers Performance

  • Rocco Antonio Romeo,
  • Michele Gesino,
  • Marco Maggiali and
  • Luca Fiorio

24 July 2021

The gripper is the far end of a robotic arm. It is responsible for the contacts between the robot itself and all the items present in a work space, or even in a social space. Therefore, to provide grippers with intelligent behaviors is fundamental, e...

(This article belongs to the Section Sensors and Robotics)
  • Article
  • Open Access
38 Citations
5,893 Views
19 Pages

29 June 2020

Laser technologies for fast prototyping using metal powder-based materials allow for faster production of prototype constructions actually used in the tooling industry. This paper presents the results of measurements on the surface texture of flat sa...

(This article belongs to the Special Issue 3D Printing of MEMS Technology)
  • Article
  • Open Access
8 Citations
6,864 Views
21 Pages

28 March 2017

This paper presents the development of an energy efficient low power stepper converter. A prototype with a hydraulic output power of ≈600 W was designed, manufactured, investigated and improved. The converter consists of a hydraulic cylinder piston u...

(This article belongs to the Special Issue Energy Efficiency and Controllability of Fluid Power Systems)
  • Article
  • Open Access
9 Citations
3,125 Views
15 Pages

Nanostructured Diamond Composites for Multifunctional Sensing Applications

  • Eric Y. Li,
  • Elluz Pacheco,
  • Andrew F. Zhou and
  • Peter X. Feng

We report studies of multifunctional, nanostructured diamond composites that were fabricated using chemical vapor deposition (CVD) techniques. Grain sizes from micrometer, to submicron, nano, and ultrananocrystalline diamond (UNCD) were controlled by...

(This article belongs to the Collection Recent Advances in Multifunctional Sensing Technology for Gas Analysis)
  • Article
  • Open Access
6 Citations
4,911 Views
18 Pages

PickingDK: A Framework for Industrial Bin-Picking Applications

  • Marco Ojer,
  • Xiao Lin,
  • Antonio Tammaro and
  • Jairo R. Sanchez

14 September 2022

This work presents an industrial bin-picking framework for robotics called PickingDK. The proposed framework employs a plugin based architecture, which allows it to integrate different types of sensors, robots, tools, and available open-source softwa...

(This article belongs to the Special Issue Industrial Robotics: Design and Applications)
  • Article
  • Open Access
72 Citations
13,709 Views
14 Pages

A Compact and Low Cost Electronic Nose for Aroma Detection

  • Miguel Macías Macías,
  • J. Enrique Agudo,
  • Antonio García Manso,
  • Carlos Javier García Orellana and ,
  • Horacio Manuel González Velasco and
  • Ramón Gallardo Caballero
  • + 1 author+ 0 author

25 April 2013

This article explains the development of a prototype of a portable and a very low-cost electronic nose based on an mbed microcontroller. Mbeds are a series of ARM microcontroller development boards designed for fast, flexible and rapid prototyping....

(This article belongs to the Special Issue Gas Sensors - 2013)

of 15