Regular black phosphorus (BP) sheets possess strongly anisotropic properties due to the unique puckered atomistic configuration, making such BP mechanically very weak in the armchair direction. The present work aims to address this issue by proposing...
To address the challenges in precision seeding of Cyperus esculentus L. seeds caused by their irregular shape and uneven surface, this study investigates the effect of soaking pretreatment on seed germination and adopts rubber-based seed suction hole...
Rice direct seeding for bunch planting is a sustainable agricultural production method that reduces production costs, improves rice lodging resistance, and conserves irrigation water in the field. However, there are notable differences in seed treatm...
We investigate the thermal conductivity of graphene Moiré superlattices formed by twisting bilayer graphene (TBG) at small angles, employing approach-to-equilibrium molecular dynamics and lattice dynamics calculations based on the Boltzmann Tr...
In the simulation analysis of the lily harvesting process, the intrinsic parameters of the lily bulb and the contact parameters between the lily bulb and the lily mechanized harvesting equipment (Q235 steel) are deficient. Thus, the three-axis size,...
Correlated electronic phenomena in magic-angle twisted bilayer graphene have garnered widespread research interest in two-dimensional materials science. As a powerful multiscale framework bridging atomic-scale resolution and mesoscopic structural evo...
Carbon fiber reinforced thermoplastic polymer (CFRTP) laminates can be used in packaging electronics components to reduce weight and shield external disturbance. The CFRTP structures in operation are inevitably to suffer dynamic loading conditions su...
The effects of grain boundary misorientation angle (θ) on mechanical properties and the mechanism of plastic deformation of the Ni/Ni3Al interface under tensile loading were investigated using molecular dynamics simulations. The results show th...
This paper presents a novel planar multifunctional sensor that is used to monitor physical variations in the environment regarding distance, angle, and stretch. A double split-ring resonator is designed at 5.2 GHz as the core operating sensor. Anothe...
Twisted van der Waals heterostructures were recently found to possess unique physical properties, such as superconductivity in magic angle bilayer graphene. Owing to the nonhomogeneous stacking, the energy of twisted van der Waals heterostructures ar...
Holliday junctions, four-way DNA crossovers central to DNA origami and key intermediates of homologous recombination, must be accurately modeled for rational DNA-nanodevice design, yet their solution conformational ensemble remains incompletely chara...
This paper investigates the flutter characteristics of composite laminates in hypersonic yawed flow using numerical simulations. The governing equations are derived based on Hamilton’s principle and were discretized using the assumed mode metho...
Vertically-stacked black phosphorus/molybdenum disulfide (BP/MoS2) heterostructures have broad prospects in flexible electronics. Bending is a common and highly concerned deformation for these flexible devices. However, the discrepancy in structures...
In the semi-desert aeolian sand areas of Northern China, surface deformation monitoring with SAR is challenged by loss of coherence due to mobile dunes, seasonal vegetation changes, and large-gradient, nonlinear subsidence from underground mining. Th...
The mechanical properties and microstructure evolution caused by dynamic loads of 316L stainless steel, fabricated using the Laser Engineered Net Shaping (LENS) technique and hot forging method were studied. Full-density samples, without cracks made...
Bilayer graphene exhibits intriguing physical and mechanical properties that are suitable for advanced electronic device applications. By introducing a new degree of freedom through interlayer twisting, exotic phenomena such as superconductivity can...
Application of quantitative dynamic contrast-enhanced (DCE) MRI in mouse models of abdominal cancer is challenging due to the effects of RF inhomogeneity, image corruption from rapid respiratory motion and the need for high spatial and temporal resol...
Continuous dynamic recrystallization (CDRX) forms a new recrystallized microstructure through the progressive increase in low-angle boundary misorientations (LAGBs) during the hot forming of metallic materials with high stacking fault energy (SFE), s...
This study systematically compares the predictive performance of single machine learning (ML) models (KNN, Bayesian ridge regression, decision tree) and ensemble learning methods (bagging, boosting, stacking) for quantifying the rheological propertie...
Holographic synthetic aperture radar (HoloSAR) enables 360° three-dimensional reconstruction by incoherently stacking tomographic subaperture images. However, after conventional subaperture-wise TomoSAR reconstruction and non-coherent integration...
Continuous dynamic recrystallization (CDRX) is widely acknowledged to occur during hot forming and plays a significant role in microstructure development in alloys with moderate to high stacking fault energy. In this work, the flow stress and CDRX be...
The effect of the swirl clocking on three-dimensional nozzle guide vane (NGV) is investigated using computational fluid dynamics. The research reports the loss characteristics of leaned and swept NGVs and the influence of swirl clocking. The three-di...
Titanium alloys with high stacking-fault energy show continuous dynamic recrystallization (CDRX) instead of discontinuous dynamic recrystallization (DDRX) during high-temperature deformation. During the CDRX mechanism, new recrystallized grains are g...
The preparation and characterization of [Cu(POP)(biq)][PF6] and [Cu(xantphos)(biq)][PF6] are reported (biq = 1,1′-biisoquinoline, POP = bis(2-(diphenylphosphanyl)phenyl)ether, and xantphos = (9,9-dimethyl-9H-xanthene-4,5-diyl)bis(diphenylphosphane)....
Human motion analysis using a smartphone-embedded accelerometer sensor provided important context for the identification of static, dynamic, and complex sequence of activities. Research in smartphone-based motion analysis are implemented for tasks, s...
Micro-electromechanical system (MEMS) micromirrors have been in development for many years, but the ability to steer beams to angles larger than 20° remains a challenging endeavor. This paper details a MEMS micromirror device capable of achieving lar...
Understanding the noncovalent (weak) interactions between asphaltene molecules is crucial to further comprehending the viscosity and aggregation behavior of asphaltenes. In the past, intermolecular interactions were characterized indirectly by calcul...
We used molecular dynamics to investigate the stability of graphene oxide (GO) layers supported on three polymeric materials, namely a polyvinylidene fluoride (PVDF), a pristine and a crosslinked polyamide–imide (PAI and PAI-cr). The membrane c...
Due to the coastal morphodynamic being impacted by climate change there is a need for systematic and large-scale monitoring. The monitoring of sandy dunes in Pays-de-la-Loire (France) requires a simultaneous mapping of (i) its morphology, allowing to...
Twist-angle engineering in van der Waals bilayers enables excitonic and valley phenomena that are not accessible in naturally stacked crystals. In a dual-gated
Global Navigation Satellite System Reflectometry (GNSS-R), with its all-weather observation capability and low-cost advantage, provides an innovative solution for dynamic sea ice monitoring. In this paper, multi-dimensional features, including the GN...
Improper internal states in proton exchange membrane fuel cells (PEMFCs), such as insufficient reactant concentration, lower membrane water content, and excessive liquid water, will lead to significant reductions in durability and reliability, which...
A Gas–solid two-phase flow coupling simulation is widely used to study the working process of pneumatic seed dischargers. Due to the demand for deterministic particle orbit numerical calculation models, seeds are mostly modeled using the partic...
The evolution of the microstructure changes during hot deformation of high-chromium content of stainless steels (martensitic stainless steels) is reviewed. The microstructural changes taking place under high-temperature conditions and the associated...
The range of fundamental phenomena and applications achievable by metamaterials (MMs) can be significantly extended by dynamic control over the optical response. A mid-infrared tunable absorber which consists of lithography-free planar multilayered d...
Methods to predict the fracture of thin carbon fibre-reinforced polymers (CFRPs) under load are of great interest in the automotive industry. The manufacturing of composites involves a high risk of defect occurrence, and the identification of those t...
A recently reported functionalization of single and multi-walled carbon nanotubes, based on a cycloaddition reaction between carbon nanotubes and a pyrrole derived compound, was exploited for the formation of a doxorubicin (DOX) stacked drug delivery...
Silicon carbide (SiC), especially 4H-SiC, is an ideal semiconductor in power electronics due to its outstanding electrical and thermal properties. It has high hardness and brittleness, which makes it difficult to machine. To understand the nanomachin...
Deep metal mines commonly contain vertically stacked goafs whose geometry and rock mass properties are incompletely documented. This study evaluates a field-constrained screening framework for high-displacement material scenarios at the Lehong Pb-Zn...
This paper presents a new theoretical proposal for a surface plasmon resonance (SPR) terahertz metamaterial absorber with five narrow absorption peaks. The overall structure comprises a sandwich stack consisting of a gold bottom layer, a silica mediu...
To study the influences of an explosion-proof wall on shock wave parameters, an air explosion protection experiment was performed, the time history of shock wave pressure at different positions before and after the explosion-proof wall was establishe...
A series of multiblock polyurethane-ureas (PUU) based on polycaprolactone diol (PCL) with a molecular mass of 530 or 2000 g/mol, as well as hard segments of different lengths and structures, were synthesized by the step-growth polymerization method....
A polarization analysis method based on a multi-parameter model is proposed to address the polarization effect analysis and calibration requirements of a dual-coded snapshot spectral polarization imaging system. A full-link polarization effect model...
Pulse-magnetron-sputtered long-term superhydrophilic coatings have been synthesized to functionalize the surfaces of solid-state cooling devices, e.g., electrocaloric heat pumps, where not only a complete wetting of the surface by a fluid is intended...
This work presents an aerodynamic and structural optimization for a Droop Nose Leading Edge Morphing airfoil as a high lift device for the UAS-S45. The results were obtained using three optimization algorithms: coupled Particle Swarm Optimization-Pat...
Biological recognition methods often use biological characteristics such as the human face, iris, fingerprint, and palm print; however, such images often become blurred under the limitation of the complex environment of the underground, which leads t...
A piezoelectric actuator (PEA) has the characteristics of high control precision and no electromagnetic interference. To improve the degree of freedom (DOF) to adapt to more working scenes, a piezoelectric–electromagnetic hybrid-driven two-DOF...
DNA-RNA hybrid duplexes play essential roles during the reverse transcription of RNA viruses and DNA replication. The opening and conformation changes of individual base pairs are critical to their biological functions. However, the microscopic mecha...
Salt pans are highly dynamic environments that are difficult to study by in situ methods because of their harsh climatic conditions and large spatial areas. Remote sensing can help to elucidate their environmental dynamics and provide important const...
The hot deformation behavior of a Mg-9.2Er-4.9Sm-2.2Zn-0.6Zr (wt.%) alloy, with emphasis on the role of grain size and long-period stacking-ordered (LPSO) phases, was examined via comparison experiments. Two types of samples were obtained through dis...
of 2