Skip to Content
You are currently on the new version of our website. Access the old version .

4,493 Results Found

  • Article
  • Open Access
7 Citations
2,556 Views
19 Pages

Corrosion Resistance of Mg/Al Vacuum Diffusion Layers

  • Shixue Zhang,
  • Yunlong Ding,
  • Zhiguo Zhuang and
  • Dongying Ju

30 September 2022

This study used a vacuum diffusion welding process to weld magnesium (Mg1) and aluminum (Al1060). The diffusion layers, with different phase compositions, were separated and extracted by grinding. The diffusion layers’ microstructures and phase...

(This article belongs to the Special Issue Mechanical, Corrosive and Tribological Degradation of Metal Coatings and Modified Metallic Surfaces)
  • Article
  • Open Access
14 Citations
3,489 Views
25 Pages

Modeling the Structure and Diffusion of Porous Layers

  • Marat Satayev,
  • Abdugani Azimov,
  • Gani Iztleuov and
  • Lazzat Satayeva

2 January 2024

The aim of this work is to develop an adsorber with a fixed bed of adsorbent and a mathematical model of the adsorption bed. On the basis of the theory of fractal clusters, an equation for calculating the layer porosity that takes into account the av...

  • Article
  • Open Access
3 Citations
4,656 Views
22 Pages

Diffusion Nitride Surface Layers on Aluminum Substrates Produced by Hybrid Method Using Gas Nitriding

  • Michał Tacikowski,
  • Jacek Słoma,
  • Rafał Jakieła,
  • Szymon Marciniak and ,
  • Ryszard Diduszko and
  • Tadeusz Wierzchoń
  • + 1 author+ 0 author

29 April 2024

While gas nitriding of steel is currently used in industry, nitriding of aluminum alloys remains an open challenge. The main obstacle is aluminum’s high susceptibility to passivation. The oxide film provides an effective barrier to nitrogen dif...

(This article belongs to the Special Issue Corrosion and Protection of Lightweight Engineering Materials: Mg Alloys, Al Alloys, Ti Alloys and Other Related Metals—2nd Edition)
  • Article
  • Open Access
1 Citations
2,752 Views
13 Pages

Effects of Diffusion Barrier Layers on the Performance of Lattice-Mismatched Metamorphic In0.83Ga0.17As Photodetectors

  • Zhejing Jiao,
  • Tianyu Guo,
  • Gaoyu Zhou,
  • Yi Gu and ,
  • Bowen Liu,
  • Yizhen Yu,
  • Chunlei Yu,
  • Yingjie Ma,
  • Tao Li and
  • Xue Li
  • + 5 authors+ 0 author

In the planar-type InGaAs photodetector (PD) structure, a diffusion barrier has the effect of modifying the zinc diffusion profile in the interface between the cap and the absorption layer to improve device performance. In this work, an n-type In0.83...

(This article belongs to the Special Issue Feature Papers in Semiconductor Devices)
  • Article
  • Open Access
8 Citations
3,139 Views
18 Pages

Characterisation of Novel and High Performing Double-Sided Microporous-Layers-Coated Gas Diffusion Layers for Polymer Electrolyte Membrane Fuel Cells

  • Fernando Ruscillo,
  • Kun Zhang,
  • Mohammed S. Ismail,
  • Kevin J. Hughes and ,
  • Derek B. Ingham,
  • Lin Ma and
  • Mohamed Pourkashanian
  • + 2 authors+ 0 author

16 November 2023

This study aims to experimentally evaluate the impact of a double-sided microporous layer coating on gas diffusion layers in terms of their key properties and fuel cell performance, in comparison to conventional single-sided coated gas diffusion laye...

(This article belongs to the Section D: Energy Storage and Application)
  • Article
  • Open Access
15 Citations
4,025 Views
16 Pages

Characterization and Boron Diffusion Kinetics on the Surface-Hardened Layers of Royalloy Steel

  • Peter Orihel,
  • Marián Drienovský,
  • Zuzana Gabalcová,
  • Peter Jurči and
  • Mourad Keddam

7 January 2023

The Royalloy steel was boronized at 1173, 1223, 1248, 1273 or 1323 K for 1, 3, 5, 7 or 10 h using a Durborid powder mixture. The boronized samples were analyzed by scanning electron microscopy, X-ray diffraction and Vickers microhardness testing. The...

  • Article
  • Open Access
22 Citations
4,345 Views
9 Pages

1 September 2018

In this paper, a commercial gas diffusion layer is used, to quantitatively study the correlation between its compressive characteristics and its operating temperature. In polymer electrode membrane fuel cells, the gas diffusion layer plays a vital ro...

(This article belongs to the Special Issue Polymeric Materials for Electrochemical Energy Conversion and Storage)
  • Article
  • Open Access
12 Citations
3,018 Views
25 Pages

Comparison and Analysis of Diffusion Models: Growth Kinetics of Diiron Boride Layers on ASTM A283 Steel

  • Martín Ortiz-Domínguez,
  • Oscar Armando Gómez-Vargas,
  • Mariana Bárcenas-Castañeda and
  • Víctor Augusto Castellanos-Escamilla

26 November 2022

Hard-coated surfacing of a few micrometers is widely applied to increase the efficiency of tools, e.g., for cutting, forming, and casting applications. Therefore, the base thermodiffusion surface treatment is a practical solution to these issues by h...

  • Review
  • Open Access
573 Views
23 Pages

Evolution Mechanisms of Diffusion-Induced Phase Transformation Layers in Gun-Barrel Bores Under Thermochemical Coupling

  • Jinghua Cao,
  • Yiming Liu,
  • Mengran Zhu,
  • Jiawei Fu and ,
  • Yao Jiang,
  • Zheng Li,
  • Ying Liu and
  • Jingtao Wang
  • + 3 authors+ 0 author

5 June 2026

This study focuses on a 155 mm 32CrNi3MoV steel barrel and presents a thermochemically coupled phase transformation and diffusion dynamics model. The model leverages the significant disparity between radial and axial temperature gradients to simplify...

(This article belongs to the Special Issue Advances in Forming and Heat Treatments of Metallic Materials)
  • Article
  • Open Access
8 Citations
3,903 Views
16 Pages

Single- and Double-Sided Coated Gas Diffusion Layers Used in Polymer Electrolyte Fuel Cells: A Numerical Study

  • Isaac C. Okereke,
  • Mohammed S. Ismail,
  • Derek B. Ingham,
  • Kevin Hughes and ,
  • Lin Ma and
  • Mohamed Pourkashanian
  • + 1 author+ 0 author

27 May 2023

A new three-dimensional numerical model of a polymer electrolyte fuel cell (PEFC) with a single straight channel was developed to primarily investigate the important impact of the double-sided microporous layer (MPL) coating on the overall performanc...

(This article belongs to the Section D2: Electrochem: Batteries, Fuel Cells, Capacitors)
  • Article
  • Open Access
148 Views
16 Pages

24 October 2026

High-performance and durable organic photovoltaics (OPVs) require interlayers that enable efficient carrier extraction and long-term stability while remaining compatible with scalable and printing-based processing. In this study, we demonstrate a mol...

(This article belongs to the Special Issue Recent Advances in Applied Polymers in Renewable Energy)
  • Article
  • Open Access
9 Citations
2,698 Views
14 Pages

Elucidating the Mass Transportation Behavior of Gas Diffusion Layers via a H2 Limiting Current Test

  • Min Wang,
  • Wei Zhao,
  • Shuhan Kong,
  • Juntao Chen and ,
  • Yunfei Li,
  • Mengqi Liu,
  • Mingbo Wu and
  • Guanxiong Wang
  • + 3 authors+ 0 author

17 August 2023

The gas diffusion layer (GDL), as a key component of proton exchange membrane fuel cells (PEMFCs), plays a crucial role in PEMFC’s polarization performance, particularly in mass transport properties at high current densities. To elucidate the c...

(This article belongs to the Section Advanced Nanomaterials and Nanotechnology)
  • Article
  • Open Access
5 Citations
3,617 Views
11 Pages

Transport Parameter Correlations for Digitally Created PEFC Gas Diffusion Layers by Using OpenPNM

  • Ángel Encalada-Dávila,
  • Mayken Espinoza-Andaluz,
  • Julio Barzola-Monteses,
  • Shian Li and
  • Martin Andersson

30 June 2021

A polymer electrolyte fuel cell (PEFC) is an electrochemical device that converts chemical energy into electrical energy and heat. The energy conversion is simple; however, the multiphysics phenomena involved in the energy conversion process must be...

(This article belongs to the Special Issue Modeling Approaches in Fuel Cells and Electrolyzers)
  • Article
  • Open Access
363 Views
20 Pages

Orientation scheduling varies linear coefficients across rounds while preserving byte locality, invertibility, the branch-number floor, and the surrounding substitution-permutation network. For independently applied 8×8 invertible maps over GF(...

  • Article
  • Open Access
9 Citations
2,290 Views
11 Pages

Experimental Study on the Effect of Carbon Graphitization Degree and Pore Structure on the Electrochemical Durability of Gas Diffusion Layers

  • Jianan Wang,
  • Lingfeng Gao,
  • Tianshu Liao,
  • Feng Cheng and ,
  • Daming Zhou and
  • Shiyang Hua
  • + 1 author+ 0 author

25 November 2023

Gas diffusion layers (GDLs) in high-temperature, high-humidity, and high-electric-potential environments can be affected by the carbon corrosion and degradation of Polytetrafluoroethylene (PTFE) network structures, resulting in reduced reliability an...

(This article belongs to the Section D2: Electrochem: Batteries, Fuel Cells, Capacitors)
  • Article
  • Open Access
11 Citations
7,942 Views
16 Pages

20 December 2022

A proton exchange membrane fuel cell is an energy convertor that produces environmentally friendly electrical energy by oxidation of hydrogen, with water and heat being byproducts. This study investigates the gas diffusion layer (GDL) of the membrane...

  • Article
  • Open Access
5 Citations
1,699 Views
13 Pages

9 February 2025

One of the key challenges in optimizing the transfer characteristics of carbon cloth gas diffusion layers (GDLs) is accurately evaluating their effective transport properties. In this work, a stochastic reconstruction algorithm based on structural pa...

(This article belongs to the Section 2D and Carbon Nanomaterials)
  • Article
  • Open Access
2,683 Views
20 Pages

16 November 2023

In this paper, some rational high-accuracy compact finite difference schemes on nonuniform grids (NRHOC) are introduced for solving convection–diffusion equations. The derived NRHOC schemes not only can suppress the oscillatory property of nume...

  • Article
  • Open Access
3 Citations
1,214 Views
18 Pages

Coupling Effects of Microstructure Characteristics on Stress Distribution for Pore-Scale Gas Diffusion Layers

  • Yushuai Sun,
  • Pinliang Du,
  • Miaoqi Bian,
  • He Miao and ,
  • Hao Hu and
  • Liusheng Xiao
  • + 1 author+ 0 author

21 March 2025

A gas diffusion layer (GDL) is an essential component for the efficient operation of proton exchange membrane fuel cells, requiring stable mechanical strength and uniform stress distribution to achieve higher durability. The various microstructure ch...

(This article belongs to the Special Issue Advances in Fuel Cells: Materials, Technologies, and Applications)
  • Article
  • Open Access
2 Citations
1,476 Views
18 Pages

9 August 2025

Water management is a critical issue for improving both the performance and durability of proton exchange membrane fuel cells (PEMFCs). A gas diffusion layer (GDL), as a porous medium, plays a key role in liquid water removal, reactant supply, and en...

(This article belongs to the Special Issue Advances in New Sources of Energy and Fuels)
  • Review
  • Open Access
76 Citations
12,339 Views
20 Pages

Gas Diffusion Layer for Proton Exchange Membrane Fuel Cells: A Review

  • Hui Guo,
  • Lubing Chen,
  • Sara Adeeba Ismail,
  • Lulu Jiang and ,
  • Shihang Guo,
  • Jie Gu,
  • Xiaorong Zhang,
  • Yifeng Li,
  • Yuwen Zhu and
  • Donglin Han
  • + 6 authors+ 1 author

9 December 2022

Proton exchange membrane fuel cells (PEMFCs) are an attractive type of fuel cell that have received successful commercialization, benefitted from its unique advantages (including an all solid-state structure, a low operating temperature and low envir...

  • Article
  • Open Access
8 Citations
4,542 Views
16 Pages

Microstructure and Corrosion Resistance of Zn-Al Diffusion Layer on 45 Steel Aided by Mechanical Energy

  • Jianbin Tong,
  • Yi Liang,
  • Shicheng Wei,
  • Hongyi Su and ,
  • Bo Wang,
  • Yuzhong Ren,
  • Yunlong Zhou and
  • Zhongqi Sheng
  • + 3 authors+ 0 author

18 September 2019

In harsh environments, the corrosion damage of steel structures and equipment is a serious threat to the operational safety of service. In this paper, a Zn-Al diffusion layer was fabricated on 45 steel by the Mechanical Energy Aided Diffusion Method...

(This article belongs to the Special Issue Advanced Coatings for Corrosion Protection)
  • Feature Paper
  • Article
  • Open Access
7 Citations
5,299 Views
14 Pages

22 February 2018

Underground coal gasification (UCG) proceeds generally in the presence of an ash layer on coal (or char) surface. The ash layer increases the mass transfer resistance of O2 to the gasification surface, which may become the limiting step of whole proc...

(This article belongs to the Special Issue Biomass Chars: Elaboration, Characterization and Applications Ⅱ)
  • Article
  • Open Access
7 Citations
2,931 Views
14 Pages

Diffusion Barrier Performance of Ni-W Layer at Sn/Cu Interfacial Reaction

  • Jinye Yao,
  • Chenyu Li,
  • Min Shang,
  • Xiangxu Chen and ,
  • Yunpeng Wang,
  • Haoran Ma,
  • Haitao Ma and
  • Xiaoying Liu
  • + 3 authors+ 0 author

25 July 2024

As the integration of chips in 3D integrated circuits (ICs) increases and the size of micro-bumps reduces, issues with the reliability of service due to electromigration and thermomigration are becoming more prevalent. In the practical application of...

(This article belongs to the Special Issue Advanced Electronic Packaging Technology: From Hard to Soft)
  • Article
  • Open Access
9 Citations
5,344 Views
14 Pages

13 November 2020

It is well-known that Cu–Sn intermetallic compounds are easily produced during reflow process and result in poor reliability of solder bump. Recently, amorphous metallic films have been considered to be the most effective barrier layer because...

  • Article
  • Open Access
16 Citations
2,965 Views
11 Pages

5 October 2020

Passive direct methanol fuel cells (pDMFCs) are promising devices to replace the conventional batteries in portable electronic devices, due to their higher energy densities, autonomies, and instant recharging. However, some challenges, such as their...

(This article belongs to the Section A5: Hydrogen Energy)
  • Article
  • Open Access
5 Citations
5,904 Views
25 Pages

24 June 2020

Due to the rapid increase in current density encountered in new chips, the phenomena of thermomigration and electromigration in the solder bump become a serious reliability issue. Currently, Ni or TiN, as a barrier layer, is widely academically studi...

  • Article
  • Open Access
383 Views
22 Pages

15 September 2026

Non-contact diffuse reflectance to below-surface absorption disguised by a thick superficial layer is challenging to instrument and model. We develop a semi-empirical “capsule” model of non-contact diffuse reflectance, configured as cente...

(This article belongs to the Section Biophotonics and Biomedical Optics)
  • Article
  • Open Access
15 Citations
5,574 Views
13 Pages

6 March 2019

In this paper, the mechanical degradation of a commercial gas diffusion layer subjected to repeated freeze–thaw thermal cycles is studied. In a fuel cell, the mechanical assembly state directly affects the performance of polymer electrolyte membrane...

(This article belongs to the Special Issue Assessment of the Ageing and Durability of Polymers: Procedures and Reliability)
  • Article
  • Open Access
3 Citations
1,635 Views
10 Pages

18 November 2024

The popularization of lithium metal anode has been limited due to uneven deposition processes and lithium dendrites. Guiding homogeneous nucleation during the initial plating stage of lithium is vital to obtain a stable lithium metal anode. Herein, a...

  • Article
  • Open Access
17 Citations
3,154 Views
23 Pages

Laser Processing of Diffusion Boronized Layer Produced on Monel® Alloy 400—Microstructure, Microhardness, Corrosion and Wear Resistance Tests

  • Aneta Bartkowska,
  • Dariusz Bartkowski,
  • Damian Przestacki,
  • Mateusz Kukliński and ,
  • Andrzej Miklaszewski and
  • Piotr Kieruj
  • + 1 author+ 0 author

8 December 2021

The paper presents the results of studies of microstructure, mechanical and physicochemical properties of surface layers produced by laser modification of the diffusion boron layer on Monel® Alloy 400. The diffusion boron layers were produced at...

  • Article
  • Open Access
27 Citations
7,568 Views
13 Pages

In the cathode side of a polymer electrolyte fuel cell (PEFC), a micro porous layer (MPL) added between the catalyst layer (CL) and the gas diffusion layer (GDL) plays an important role in water management. In this work, by using both quasi-static an...

(This article belongs to the Special Issue Advances in Modeling Flow and Transport in Porous Media)
  • Article
  • Open Access
14 Citations
6,301 Views
9 Pages

Plasma-Enhanced Atomic Layer Deposition of TiN Thin Films as an Effective Se Diffusion Barrier for CIGS Solar Cells

  • Hyun-Jae Woo,
  • Woo-Jae Lee,
  • Eun-Kyong Koh,
  • Seung Il Jang and ,
  • Shinho Kim,
  • Hyoungseok Moon and
  • Se-Hun Kwon
  • + 2 authors+ 0 author

2 February 2021

Plasma-enhanced atomic layer deposition (PEALD) of TiN thin films were investigated as an effective Se diffusion barrier layer for Cu (In, Ga) Se2 (CIGS) solar cells. Before the deposition of TiN thin film on CIGS solar cells, a saturated growth rate...

(This article belongs to the Special Issue Nanomaterials for Energy Conversion and Catalytic Applications)
  • Article
  • Open Access
5 Citations
4,003 Views
16 Pages

29 September 2023

The thermal diffusivity of powder bed plays a crucial role in laser powder bed fusion (LPBF) additive manufacturing. The mechanical properties of the parts built by LPBF are immensely influenced by the thermal properties of the powder bed. This study...

(This article belongs to the Special Issue Advances in Additive Manufacturing (Volume II))
  • Article
  • Open Access
7 Citations
3,262 Views
13 Pages

Modelling of Irreversible Homogeneous Reaction on Finite Diffusion Layers

  • Singaravel Anandhar Salai Sivasundari,
  • Rathinam Senthamarai,
  • Mohan Chitra Devi,
  • Lakshmanan Rajendran and
  • Michael E. G. Lyons

26 August 2022

The mathematical model proposed by Chapman and Antano (Electrochimica Acta, 56 (2010), 128–132) for the catalytic electrochemical–chemical (EC’) processes in an irreversible second-order homogeneous reaction in a microelectrode is d...

(This article belongs to the Special Issue Feature Papers in Electrochemistry)
  • Article
  • Open Access
15 Citations
3,608 Views
18 Pages

Modeling the Conductivity and Diffusion Permeability of a Track-Etched Membrane Taking into Account a Loose Layer

  • Vladlen S. Nichka,
  • Semyon A. Mareev,
  • Pavel Yu. Apel,
  • Konstantin G. Sabbatovskiy and ,
  • Vladimir D. Sobolev and
  • Victor V. Nikonenko
  • + 1 author+ 0 author

19 December 2022

The microheterogeneous model makes it possible to describe the main transport properties of ion-exchange membranes using a single set of input parameters. This paper describes an adaptation of the microheterogeneous model for describing the electrica...

(This article belongs to the Special Issue Ion Transport in Membranes and Membrane Systems: Modelling and Experiment)
  • Article
  • Open Access
15 Citations
4,236 Views
17 Pages

Effects of Compression and Porosity Gradients on Two-Phase Behavior in Gas Diffusion Layer of Proton Exchange Membrane Fuel Cells

  • Hao Wang,
  • Guogang Yang,
  • Qiuwan Shen,
  • Shian Li and ,
  • Fengmin Su,
  • Ziheng Jiang,
  • Jiadong Liao,
  • Guoling Zhang and
  • Juncai Sun
  • + 4 authors+ 0 author

Water management within the gas diffusion layer (GDL) plays an important role in the performance of the proton exchange membrane fuel cell (PEMFC) and its reliability. The compression of the gas diffusion layer during fabrication and assembly has a s...

(This article belongs to the Special Issue Membranes in Fuel Cell and Electrolyzer Applications)
  • Review
  • Open Access
39 Citations
10,941 Views
26 Pages

11 October 2013

This contribution contains a survey of basic literature dealing with arrays of microelectrodes with overlapping diffusion layers as prospective tools in contemporary electrochemistry. Photolithographic thin layer technology allows the fabrication of...

(This article belongs to the Special Issue Ultramicroelectrode Electrochemistry - Theory and Applications)
  • Article
  • Open Access
6 Citations
3,732 Views
15 Pages

27 July 2024

In this study, we optimized the parameters of diffusion bonding on multi-layered stainless steel 316L and 430 stacks. The preparation process for diffusion bonding is crucial, as the bonding surfaces need to be polished and meticulously cleaned to en...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
6 Citations
3,279 Views
22 Pages

The flow separation occurring in the S-shaped diffuser with boundary layer ingestion (BLI) has a significant effect on the performance of the embedded engine. Previous studies have found that the area ratio (AR) as well as the length-to-offset ratio...

(This article belongs to the Section Aeronautics)
  • Article
  • Open Access
8 Citations
6,248 Views
9 Pages

Role of Cl on Diffusion of Cu in In2S3 Layers Prepared by Ion Layer Gas Reaction Method

  • Henry Wafula,
  • Musembi Robinson,
  • Albert Juma,
  • Thomas Sakwa and ,
  • Manasse Kitui,
  • Rodrigo Araoz and
  • Christian-H. Fischer
  • + 2 authors+ 0 author

16 February 2015

Ion layer gas reaction (ILGAR) method allows for deposition of Cl-containing and Cl-free In2S3 layers from InCl3 and In(OCCH3CHOCCH3)3 precursor salts, respectively. A comparative study was performed to investigate the role of Cl on the diffusion of...

  • Article
  • Open Access
558 Views
17 Pages

28 May 2026

Characterizing pollutant transport in heterogeneous layered media, such as structured surface soils and layered aquifers, is crucial for predicting and managing environmental pollution. However, the characterization of the coupled bimodal transport a...

(This article belongs to the Special Issue Fate and Transport of Contaminants in Soil and Water)
  • Article
  • Open Access
2 Citations
3,120 Views
12 Pages

A Nanofiber-Based Gas Diffusion Layer for Improved Performance in Air Cathode Microbial Fuel Cells

  • Giulia Massaglia,
  • Tommaso Serra,
  • Fabrizio Candido Pirri and
  • Marzia Quaglio

21 October 2023

This work investigates a new nanostructured gas diffusion layer (nano-GDL) to improve the performance of air cathode single-chamber microbial fuel cells (a-SCMFCs). The new nano-GDLs improve the direct oxygen reduction reaction by exploiting the best...

(This article belongs to the Special Issue Nanomaterials Applied to Fuel Cells and Catalysts)
  • Article
  • Open Access
3 Citations
1,889 Views
10 Pages

Enhancing Fuel Cell Performance by Constructing a Gas Diffusion Layer with Gradient Microstructure

  • Rui-Xin Wang,
  • Bai-He Chen,
  • Ye-Fan-Hao Wang,
  • Cheng Guo and ,
  • Bo-Wen Deng,
  • Zhou-Long Song,
  • Yi You and
  • Hai-Bo Jiang
  • + 3 authors+ 0 author

11 July 2025

This study focuses on addressing the issues of water flooding and mass transfer limitations in proton exchange membrane fuel cells (PEMFCs) under high current density conditions. A multi-scale gradient pore gas diffusion layer (GDL) is designed to en...

(This article belongs to the Section Energy Materials)
  • Article
  • Open Access
5 Citations
4,122 Views
20 Pages

17 June 2022

This study investigated surface layer turbulence characteristics and parameters using 20 Hz eddy covariance data collected from five heights with winds up to 42.27 m s−1 when Super Typhoon Maria (2018) made landfall. The dependence of these par...

(This article belongs to the Special Issue Atmospheric Boundary Layer Processes, Characteristics and Parameterization)
  • Article
  • Open Access
2 Citations
2,467 Views
23 Pages

In polymer electrolyte membrane fuel cells, the gas diffusion layer (GDL) is composed of porous media and serves a critical role as a mass transport layer, facilitating reactant gas diffusion, removal of water generated in the catalyst layer, and ele...

(This article belongs to the Topic Modeling, Stability, and Control of Dynamic Systems and Their Applications)
  • Article
  • Open Access
21 Citations
3,599 Views
25 Pages

Investigation of the Solid-Phase Joint of VT-14 Titanium Alloy with 12KH18N10T Stainless Steel Obtained by Diffusion Welding through Intermediate Layers

  • Alexander Viktorovich Lavrishchev,
  • Sergei Viktorovich Prokopev,
  • Vadim Sergeevich Tynchenko,
  • Aleksander Vladimirovich Myrugin and ,
  • Vladislav Viktorovich Kukartsev,
  • Kirill Aleksandrovich Bashmur,
  • Roman Borisovich Sergienko,
  • Valeriya Valerievna Tynchenko and
  • Aleksey Vasilyevich Lysyannikov
  • + 4 authors+ 0 author

22 August 2021

This paper describes the technological process of manufacturing bimetallic billets, which are capable of operating at high pressures, high temperatures, and in corrosive environments, from VT-14 titanium alloy and 12KH18N10T stainless steel. To obtai...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
4 Citations
1,928 Views
12 Pages

Study on the Diffusion Law of Grouting Slurry at the Pile Tip of Bored Piles in Gravel Pebble Layers

  • Junhu Li,
  • Yuping Wu,
  • Chenghui Wu,
  • Fengpan Zhu and ,
  • Quanwei Zhao,
  • Gangping Zhang,
  • Zihai Yan and
  • Riqing Xu
  • + 3 authors+ 0 author

19 August 2024

The post-construction improvement technology of bored pile tips has been widely used in the construction of gravel pebble layers, but the diffusion law of the grouting slurry remains to be revealed. To study the diffusion law of the grouting slurry a...

(This article belongs to the Section Building Energy, Physics, Environment, and Systems)
  • Article
  • Open Access
68 Citations
15,094 Views
9 Pages

Manufacturing the Gas Diffusion Layer for PEM Fuel Cell Using a Novel 3D Printing Technique and Critical Assessment of the Challenges Encountered

  • Arunkumar Jayakumar,
  • Sarat Singamneni,
  • Maximiano Ramos,
  • Ahmed M Al-Jumaily and
  • Sethu Sundar Pethaiah

14 July 2017

The conventional gas diffusion layer (GDL) of polymer electrolyte membrane (PEM) fuel cells incorporates a carbon-based substrate, which suffers from electrochemical oxidation as well as mechanical degradation, resulting in reduced durability and per...

(This article belongs to the Special Issue Advanced Materials in Polymer Electrolyte Fuel Cells)

of 90