171 Results Found

The Kanggur ductile shear zone (KDSZ), located in the south margin of the Central Asia Orogenic Belt (CAOB), plays a critical role in the tectonic evolution and mineralization in eastern Tianshan. Although different isotopic chronologies have been re...

Conventional multi-rotors with limited deformation capability are unable to meet the traversal capability of complex and narrow environments. In order to solve the above problems, a novel type of deformable quadrotor with a two-degree-of-freedom arm,...

A time-frequency method retrieving the acceleration changes in the terminal stage of the M6.1 Ludian earthquake in China is discussed in this article. The non-linear, non-stationary seismo-demformation was obtained by using the Hilbert–Huang tr...

The dynamic characteristics of rigid-flexible manipulators involve complex rigid-flexible coupling phenomena, which essentially comprise a nonlinear distributed parameter system with infinite degrees of freedom. Consequently, it results in challenges...

Ultrasonic metal welding (USMW) finds widespread utilization in automotive industries, where it is used for connecting the wire harness of the vehicle, consisting of stranded wires, to the terminals. However, the behavior of the strands during the co...

Details on the fall speeds of raindrops are essential in both applications and natural events, such as rain-rate retrieval and soil erosion. Here, we examine the influence of turbulence on the terminal velocity of two water drops of different sizes....

The discrete element method (DEM) can be effectively used in investigations of the deformations and failures of jointed rock slopes. However, when to appropriately terminate the DEM iterative process is not clear. Recently, a displacement-based discr...

Four dogs were presented with thoracic limb deformity. After clinical and radiographic examinations, a diagnosis of congenital malformations was performed for each of them. In one case, a deformity involving both the radial and ulnar side of the dist...

A core-shell particle was fabricated by grafting amino-terminated hyperbranched polymer to the surface of silica nanoparticles. The influences of core-shell particle contents on the tensile and impact strength of the epoxy thermosets modified with am...

Abnormalities in cellular differentiation during embryo-fetal period may lead to various malformations of the spine. Caudal regression syndrome (CRS) is a group of defects with premature growth/development termination of the vertebral column. CRS can...

The discrete element method (DEM) is commonly employed to analyze the deformations and failures of jointed rock slopes. However, when the iterative calculation process of the DEM modeling should be terminated is still unclear. To solve the above prob...

With the acceleration of urbanization, surface deformation monitoring has become crucial. Existing monitoring systems face several challenges, such as data singularity, the poor nighttime monitoring quality of video surveillance, and fragmented visua...

Due to its outstanding ductility over a large temperature range, equiatomic HfNbTaTiZr is well-suited for investigating the influence of temperature and plastic strain on deformation mechanisms in concentrated, body centered cubic solid solutions. Fo...

The objective of this study was to identify the locations of deep-seated gravitational slope deformations (DGSDs) and define the numerical characteristics of these deformations to contribute to the sustainable management of social infrastructure in t...

In the light of increasing research into amorphous composites and their applications, as-cast specimens of multicomponent Ti48Zr18V12Cu5Be17 amorphous composites were prepared via water-cooled copper mold suction casting. Subsequently, the as-cast sp...

The life cycle of mining results in various patterns of surface deformation as it progresses through development, production, and reclamation. Therefore, the spatial–temporal patterns of ground deformation provide a crucial indicator to underst...

ZYMV is one of the most important plant viruses that cause economical damage in cucurbits. The symptoms of ZYMV in different cucurbits include stunting, yellowing, mottling, severe mosaic, leaf and fruit deformation, blistering and shoe string. Inves...

The dynamics of a three-phase gas–liquid–liquid multiphase system is examined by direct numerical simulations. The system consists of a continuous liquid phase, buoyant gas bubbles, and smaller heavy drops that fall relative to the continuous liquid....

The mammalian nuclear lamina proteins—prelamin A- and B-type lamins—are post-translationally modified by farnesylation, endoproteolysis, and carboxymethylation at a carboxy-terminal CAAX (C, cysteine; a, aliphatic amino acid; X, any amino...

Many debris-covered glaciers are broadly distributed across High Mountain Asia and have made a number of contributions to water circulation for Qinghai-Tibet Plateau (QTP). The formation of large supraglacial lakes poses risks for glacier lake outbur...

In fetal aortic stenosis (AS), it remains challenging to predict left ventricular development over the course of pregnancy. Myocardial organization, differentiation and fibrosis could be potential biomarkers relevant for biventricular outcome. We pre...

Preformed fragments can deform or even fracture when subjected to contact blasts, which might lead to a reduction of the terminal effect. Therefore, to solve this problem, the effect of surface electroplating on the fragment deformation behavior unde...

The most critical positions of a prefabricated cable accessory, from the electrical point of view, are the interfaces between the stress cone and its surroundings. Accordingly, the contact pressure on those interfaces needs to be carefully designed t...

Multiphase flows are a part of many industrial processes, where the bubble motion influences the hydrodynamic behavior of the batch. The current trend is to use numerical solvers that can simulate the movement and mutual interactions of bubbles. The...

Seismicity in the Ionian Sea (W. Greece) is mainly generated along the Cephalonia–Lefkada Transform Fault Zone (CLTFZ) in the central Ionian, and on the northwestern termination of the Hellenic subduction margin in the south. Joint pre-, co- an...

The esthetic clasp material is a clinical demand for a satisfactory removable partial denture. The purpose of this study is to assess the mechanical performance of graphene-based polymer (GBP) and polyether-ether-ketone (PEEK) materials as clasp mate...

Bending deformation gives rise to interwire slippage for spiral strands subjected to multi-axial loads, and further induces wear or fatigue phenomena in practice. The interwire friction would resist bending deformation and lead to uneven tension dist...

Glacier velocity is one of the most important parameters to understand glacier dynamics. The Severnaya Zemlya archipelago is host to many glaciers of which four major ice caps encompassing these glaciers are studied, namely, Academy of Sciences, Rusa...

Trichogramma dendrolimi Matsumura is widely used as a biological control agent of many lepidopteran pests. Diapause has been used as an effective method to preserve the Trichogramma products during mass rearing production. However, it currently takes...

Polyphenylsilsesquioxane (PhSiO3/2) particles as an organic-inorganic hybrid were prepared using sol-gel method, and monolithic samples were obtained via a warm-pressing. The reaction mechanism of particles’ polymerization and transformation to...

The current research is devoted to the research of potential catalysts for the two-component silyl-terminated prepolymer/epoxy resin system. The catalyst system must catalyze the prepolymer of the opposite component while not curing the prepolymer in...

MYB-CC transcription factors (TFs) are essential for plant growth and development. Members of the MYB-CC subfamily with long N terminal domains, such as phosphate starvation response 1 (PHR1) or PHR1-like TFs, have well documented functions, while th...

3D vision technology has been gradually applied to intelligent terminals ever since Apple Inc. introduced structured light on iPhoneX. At present, time-of-flight (TOF) and laser speckle-based structured light (SL) are two mainstream technologies appl...

The conventional rolling of magnesium alloy with a single pass and large reduction will cause severe edge cracking. The sheet without cracks can be achieved by limited width rolling. The microstructure evolution of the sheet with cracks after convent...

We obtained high-resolution (10 m) horizontal displacement fields from pre- and post-seismic Sentinel-2 optical images of the 2018 Mw7.5 Palu earthquake using subpixel image correlation. From these, we calculated the curl, divergence, and shear strai...

This paper analyzes the long-term response of unlined energy storage located at shallow depth to improve the distance between a wind farm and storage. The numerical approach follows the hybrid scheme that combined a mechanical constitutive model to e...

Elastomers with supreme mechanical adaptability where the increasing stress under continuous deformation is significantly inhibited within a large deformation zone, are highly desired in many areas, such as artificial muscles, flexible and wearable e...

In this study, petrological, structural, geochemical, and geochronological analyses of the Statherian alkali feldspar granite and porphyritic alkali feldspar granite in the southwestern part of the Korean Peninsula were conducted to examine petrogene...

The Bolu tunnel is located between the Istanbul-Ankara Highway and its construction took approximately 13 years. Since the beginning of the tunnel excavation, serious deformations and stability problems have been encountered. The basis of the problem...

In this paper, the concept design of intelligent technical textile blocks implemented with optical fibers that include fiber Bragg gratings for strain and temperature sensing is briefly introduced. In addition to the main design of the system, a desi...

This paper focuses on the structural and finite strain analysis of the Pelagonian nappe, the HP/LT Ampelakia unit, and the Olympos-Ossa unit in the Olympos-Ossa mountainous area in order to better understand the exhumation history of the Ampelakia un...

In this study, innovative enhancements of rectangular tube-type buckling-restrained braces are proposed to prevent bulging failure on the surface of the outer restrainer and validated experimentally. First, an inner restrainer composed of a bent plat...

Bone is a complex material comprising high stiffness, but brittle, crystalline bio-apatite combined with compliant, but tough, collagen fibres. It can accommodate significant deformation, and the bone microstructure inhibits crack propagation such th...

The causes and mechanisms underlying adolescent idiopathic scoliosis (AIS) remain unclear, and the available information regarding metabolic imbalances in AIS is still insufficient. This investigation aimed to evaluate the concentrations of specific...

Half-titanocenes are well known to show high activity for ethylene polymerization and good capability for copolymerization of ethylene with other olefins, and the ancillary ligands can crucially affect the catalytic performance. In this paper, the me...

The p63 gene encodes a master regulator of epidermal commitment, development, and differentiation. Heterozygous mutations in the DNA binding domain cause Ectrodactyly, Ectodermal Dysplasia, characterized by limb deformation, cleft lip/palate, and ect...

Geometric complexities play an important role in the nucleation, propagation, and termination of strike-slip earthquake ruptures. The 2021 Mw7.4 Maduo earthquake rupture initiated at a large releasing stepover with a complex fault intersection. In th...

On 7 January 2025, a MS 6.8 earthquake struck Dingri County, southern Tibet, within the extensional regime of the central Himalaya–southern Tibetan Plateau. Using ascending and descending Sentinel-1A SAR data, we applied a two-pass Differential...

Normal faults play a key role in accommodating extensional deformation within the South Tibet Rift. The MS 6.8 Tingri earthquake of 7 January 2025 therefore provides a rare opportunity to investigate how these normal faults accommodate east–wes...

Recent experimental studies revealed the presence of Volterra dislocation-type long-range elastic strain/stress field around a shear band (SB) terminated in a bulk metallic glass (BMG). The corollary from this finding is that shear bands can interact...