Skip to Content

372 Results Found

  • Technical Note
  • Open Access
33 Citations
8,735 Views
18 Pages

21 December 2019

Complex blade responses such as a rotating stall or simultaneous resonances are common in modern engines and their observation can be a challenge even for state-of-the-art tip-timing systems and trained operators. This paper analyses forced vibration...

(This article belongs to the Special Issue Recent Advances in Sensing Techniques, Structural Dynamics and Control)
  • Article
  • Open Access
4 Citations
2,659 Views
18 Pages

17 May 2024

Centrifugal compressors are frequently used in both military and commercial areas because they can be easily manufactured and reach high-pressure compression ratios. The factor that limits the performance and operating range of compressors is flow in...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
56 Citations
11,788 Views
15 Pages

10 December 2016

The effects of compressor aerodynamic parameters, such as pitch-chord ratio, aspect ratio, and fillet, on the cascade performance have been studied in this paper. Slot configuration at the root of the blade has been proved to be an efficient passive...

(This article belongs to the Special Issue Gas Turbines Propulsion and Power)
  • Article
  • Open Access
21 Citations
9,892 Views
16 Pages

18 September 2013

Centrifugal compressors are a key piece of equipment for modern production. Among the components of the centrifugal compressor, the impeller is a pivotal part as it is used to transform kinetic energy into pressure energy. Blade crack condition monit...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
14 Citations
8,659 Views
19 Pages

30 September 2018

In the current work a detailed investigation and a performance assessment of two eddy viscosity and two Reynolds stress turbulence models for modelling the transitional flow on a double circular arc (DCA) compressor blade is presented. The investigat...

  • Feature Paper
  • Article
  • Open Access
4 Citations
5,610 Views
11 Pages

Experimental Aerodynamic and Aeroelastic Investigation of a Transonic Compressor Rotor with Reduced Blade Count

  • Daniel Franke,
  • Daniel Möller,
  • Maximilian Jüngst,
  • Heinz-Peter Schiffer and ,
  • Thomas Giersch and
  • Bernd Becker
  • + 1 author+ 0 author

This study investigates the aerodynamic and aeroelastic characteristics of a transonic axial compressor, focusing on blade count reduced rotor behavior. The analysis is based on experiments, conducted at the Transonic Compressor Darmstadt test rig at...

  • Article
  • Open Access
3 Citations
1,131 Views
20 Pages

4 February 2026

This study advances the performance of a tandem-blade centrifugal compressor through a parametric Computational Fluid Dynamics (CFD) methodology integrated with Response Surface Methodology (RSM). Numerical simulations were executed by solving steady...

(This article belongs to the Special Issue Fluid Dynamics and Thermodynamic Studies in Gas Turbine)
  • Article
  • Open Access
19 Citations
4,024 Views
17 Pages

Fatigue Damage Evaluation of Compressor Blade Based on Nonlinear Ultrasonic Nondestructive Testing

  • Pengfei Wang,
  • Weiqiang Wang,
  • Sanlong Zheng,
  • Bingbing Chen and
  • Zengliang Gao

1 December 2021

Nonlinear ultrasonic testing is highly sensitive to micro-defects and can be used to detect hidden damage and defects inside materials. At present, most tests are carried out on specimens, and there are few nonlinear ultrasonic tests for fatigue dama...

(This article belongs to the Special Issue Failure Analysis of Marine Structure)
  • Article
  • Open Access
1 Citations
2,684 Views
13 Pages

4 October 2023

The following paper evaluates the strength properties of the critical area of the turbine rotor stage of a jet engine. This is where the blade is attached to the rotor disk. Important aspects of this issue are characteristic geometrical dimensions an...

  • Feature Paper
  • Article
  • Open Access
8 Citations
4,558 Views
16 Pages

Numerical Study on Sensitivity of Turbofan Engine Performance to Blade Count of Centrifugal Compressor Impeller

  • Arkadiusz Bednarz,
  • Kirill Kabalyk,
  • Robert Jakubowski and
  • Rafał Bartłomowicz

8 July 2023

The aim of this publication was to investigate the effects the blade count of a high-pressure centrifugal compressor’s impeller has on the performance of the DGEN 380 turbine engine at take-off. The study began with the development of a zero-di...

(This article belongs to the Topic Decarbonised Powertrains and Emission Control in Transportation)
  • Article
  • Open Access
33 Citations
10,149 Views
18 Pages

16 November 2019

Rotating stall limits the operating range and stability of the centrifugal compressor and has a significant impact on the lifetime of the impeller blade. This paper investigates the relationship between stall pressure wave and its induced non-synchro...

(This article belongs to the Special Issue Optical Sensors for Structural Health Monitoring)
  • Article
  • Open Access
2,077 Views
19 Pages

14 July 2023

At present, there are very few vibration test designs for compressor stator blades in damped blade test research, and there is a lack of consideration of the holding ring structure of the blade installation. In recent years, compressor designs have b...

  • Article
  • Open Access
4 Citations
3,391 Views
21 Pages

7 December 2022

A highly loaded transonic centrifugal compressor is aerodynamically designed and numerically investigated. The objectives are to improve the compressor efficiency by using tandem impeller configuration and 3D free-formed blade design concepts. This a...

(This article belongs to the Section J: Thermal Management)
  • Article
  • Open Access
17 Citations
4,129 Views
23 Pages

15 November 2021

Axial compressor blades with a deformed initial torsion angle caused by aerodynamic excitation resonated at the working speed and changed the rule of fatigue damage accumulation. The fatigue life of a blade has a prediction error, even causing seriou...

(This article belongs to the Special Issue Multi-Axial Fatigue and Fracture Behavior in Metals)
  • Article
  • Open Access
25 Citations
8,399 Views
18 Pages

A gas turbine power plant in Thailand had the problem of compressor blade fracture in Stages 6–8, which was caused by housing damage. This gas turbine has a total of 15 stages. The housing damage reduced the lifetime of blades to an unacceptabl...

  • Article
  • Open Access
18 Citations
7,208 Views
15 Pages

18 April 2024

The application of additive manufacturing (AM) in the aerospace industry has led to the production of very complex parts like jet engine components, including turbine and compressor blades, that are difficult to manufacture using any other convention...

(This article belongs to the Section High-Energy Beam Surface Engineering and Coatings)
  • Article
  • Open Access
7 Citations
2,140 Views
23 Pages

27 August 2025

High-pressure compressor (HPC) blades of aero engines inevitably exhibit various uncertain geometric deviations, which deteriorate engine performance and increase maintenance costs. Although the condition-based maintenance (CBM) strategy is increasin...

(This article belongs to the Section Aeronautics)
  • Article
  • Open Access
14 Citations
4,063 Views
22 Pages

4 January 2021

Gas turbine engines are highly intricate machines, and every component of them is closely associated with one another. In the traditional engine developing process, vast experiment tests are needed. To reduce unnecessary trials, a whole gas turbine e...

(This article belongs to the Section Aerospace Science and Engineering)
  • Article
  • Open Access
2 Citations
1,056 Views
19 Pages

26 September 2025

Angle crack defects significantly affect compressor blade radial deformation characteristics, posing critical challenges for reliability assessment under operational uncertainties. This study proposes a novel osprey optimization algorithm (OOA)-optim...

  • Article
  • Open Access
8 Citations
2,769 Views
16 Pages

13 October 2021

The effects of specimen size and welded joints on the very high cycle fatigue properties of compressor blade steel KMN-I were studied by ultrasonic fatigue testing. It was found that the S-N curve of large specimens had a slow decline above 107 cycle...

(This article belongs to the Special Issue Progress in Coatings Deposition by Advanced Welding and Welding-Related Processes)
  • Article
  • Open Access
5 Citations
3,473 Views
17 Pages

Investigation on Aerodynamic Performance of a Centrifugal Compressor with Leaned and Bowed 3D Blades

  • Zhehong Li,
  • Wanmin Kong,
  • Genqiang Shao,
  • Fujian Zhu and ,
  • Chaowei Zhang,
  • Feiyue Kong and
  • Yifan Zhang
  • + 2 authors+ 0 author

26 April 2024

The application of centrifugal compressors is extensive in industries such as aerospace and energy. The blade is the primary factor affecting the aerodynamic performance of compressors. In this paper, the aerodynamic performance of a centrifugal comp...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
2 Citations
2,830 Views
26 Pages

This study employs Direct Numerical Simulation (DNS) to investigate the flow and heat transfer characteristics in a compressor blade passage at five Reynolds numbers (Re=1.091×105, 1.229×105, 1.367×105, 1.506×105, and 1.645&ti...

(This article belongs to the Special Issue Vortex Flow Phenomena and Physics of Aerospace Engineering Applications (2nd Edition))
  • Article
  • Open Access
11 Citations
9,787 Views
22 Pages

14 March 2017

This paper presents a model for predicting the reference minimum-loss incidence and deviation angles of a blade arrangement with splitter vanes, which is probably a solution for future ultra-highly loaded axial compressor designs. The motivation of t...

(This article belongs to the Special Issue Gas Turbines Propulsion and Power)
  • Article
  • Open Access
7 Citations
4,852 Views
28 Pages

A Coupling Method for the Design of Shape-Adaptive Compressor Blades

  • Zhuzhell Montano,
  • Marcel Seidler,
  • Johannes Riemenschneider and
  • Jens Friedrichs

11 February 2022

The design of flexible and efficient aircraft engines and propulsion systems plays a crucial role in the development of future low-emission aircraft. Implementing shape-variable blades to compressor front stage rotors presents a high potential for in...

(This article belongs to the Special Issue Smart Structures and Systems: Actual Scientific and Industrial Research)
  • Article
  • Open Access
43 Citations
12,700 Views
16 Pages

22 December 2020

Manufacturing costs, along with operational performance, are among the major factors determining the selection of the propulsion system for unmanned aerial vehicles (UAVs), especially for aerial targets and cruise missiles. In this paper, the design...

(This article belongs to the Special Issue 10th EASN International Conference on Innovation in Aviation & Space to the Satisfaction of the European Citizens)
  • Article
  • Open Access
6 Citations
2,377 Views
27 Pages

25 November 2023

Many probability-based uncertainty quantification (UQ) schemes require a large amount of sampled data to build credible probability density function (PDF) models for uncertain parameters. Unfortunately, the amounts of data collected as to compressor...

  • Article
  • Open Access
21 Citations
8,258 Views
28 Pages

9 December 2014

Though the importance of curvature continuity on compressor blade performances has been realized, there are two major questions that need to be solved, i.e., the respective effects of curvature continuity at the leading-edge blend point and the main...

  • Article
  • Open Access
7 Citations
5,160 Views
22 Pages

15 January 2023

One-dimensional (1D) aerodynamic performance predictions are very often conducted by researchers and designers during the preliminary design of centrifugal compressors. This paper focuses on a 1D prediction method for centrifugal compressors with spl...

(This article belongs to the Section Turbomachinery)
  • Article
  • Open Access
9 Citations
16,635 Views
25 Pages

18 September 2021

The blade geometry design method is an important tool to design high performance axial compressors, expected to have large design space while limiting the quantity of design variables to a suitable level for usability. However, the large design space...

(This article belongs to the Special Issue Fluid Flow Mechanics)
  • Article
  • Open Access
1 Citations
1,091 Views
18 Pages

3 October 2025

As a core component of large marine engines, the compressor delivers robust and efficient power for propulsion. This study focuses on assessing and quantifying the uncertainty in the aerodynamic performance of a transonic rotor under various operatin...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
440 Views
20 Pages

13 May 2026

To investigate the impact of continuous leading-edge curvature on the aerodynamic performance of transonic compressor blade profiles, schlieren observations and surface pulsating pressure measurements were conducted on the baseline profile CM1.2 and...

(This article belongs to the Special Issue Advances in Aircraft Design, Optimization and Flight Control)
  • Article
  • Open Access
221 Views
11 Pages

18 September 2026

Compressor rotor blades in marine engineering applications are exposed to harsh, corrosive environments and complex aerodynamic loads, making them prone to premature failure. This study investigates the fracture of 12th-stage 2Cr13 martensitic stainl...

(This article belongs to the Special Issue Advances in Microstructure and Mechanical Behavior of High-Strength Steels)
  • Article
  • Open Access
2 Citations
2,781 Views
20 Pages

23 May 2023

There are many kinds of assembly structures in heavy-duty gas turbine compressor stator blades which have significant influence on the complex damping vibration characteristics. At present, compressor design is becoming more and more compact, so it i...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
11 Citations
5,229 Views
11 Pages

As an important energy conversion mechanism, centrifugal compressors play an important role in the national economy. The blade is one of the most critical components of the compressor. Damaged blades contain extremely high added value for remanufactu...

  • Article
  • Open Access
1 Citations
2,504 Views
20 Pages

An important question for turbomachine designers is how to deal with blade and flowpath geometric variabilities stemming from the manufacturing process or erosion during the component lifetime. The challenge consists of identifying where stringent ma...

  • Article
  • Open Access
3 Citations
1,274 Views
28 Pages

To describe the fouling characteristics of compressor blades, fouling is categorized into dense and loose layers to characterize thickness and rough structures. An uncertainty model for dense fouling layer thickness distribution is constructed using...

(This article belongs to the Special Issue Advances in Thermal Fluid, Dynamics and Control)
  • Article
  • Open Access
23 Citations
8,556 Views
27 Pages

4 November 2021

Degradation of compressors is a common concern for operators of gas turbine engines (GTEs). Surface roughness, due to erosion or fouling, is considered one of the major factors of the degradation phenomenon in compressors that can negatively affect t...

(This article belongs to the Section Aeronautics)
  • Feature Paper
  • Review
  • Open Access
133 Citations
18,940 Views
42 Pages

13 August 2020

Gas turbines (GTEs) are often utilised in harsh environments where the GT components, including compressor vanes and rotor blades, are subject to erosion damage by sand and dust particles. For instance, in a desert environment, the rate of damage mad...

(This article belongs to the Special Issue Feature Review Papers)
  • Article
  • Open Access
19 Citations
6,657 Views
19 Pages

19 April 2018

The Centrifugal compressor is a piece of key equipment for petrochemical factories. As the core component of a compressor, the blades suffer periodic vibration and flow induced excitation mechanism, which will lead to the occurrence of crack defect....

(This article belongs to the Special Issue Recent Advances in Artificial Intelligence and Deep Learning for Sensor Information Fusion)
  • Article
  • Open Access
4 Citations
2,620 Views
12 Pages

25 November 2022

The aim of this work was to numerically determine the influence of aerodynamic loads on the value of the resonant frequency of the compressor blade. The object of the research was the 1st stage compressor blade of the PZL-10W engine. As part of the r...

(This article belongs to the Special Issue Mechanics, Fatigue and Fracture of Metallic Materials)
  • Article
  • Open Access
3 Citations
5,180 Views
18 Pages

Analysis of Blade Aspect Ratio’s Influence on High-Speed Axial Compressor Performance

  • Lucilene Silva,
  • Tomas Grönstedt,
  • Carlos Xisto,
  • Luiz Whitacker and ,
  • Cleverson Bringhenti and
  • Marcus Lejon
  • + 1 author+ 0 author

The ratio between blade height and chord, named the aspect ratio (AR), plays an important role in compressor aerodynamic design. Once selected, it influences stage performance, blade losses and the stage stability margin. The choice of the design AR...

  • Article
  • Open Access
32 Citations
9,775 Views
18 Pages

21 March 2019

Tip clearance flow in axial flow compressor is unavoidable and responsible for pressure losses and noise generation and influences the stability of the compressor. However, necessary flow measurement in the blade tip region is a great challenge due t...

(This article belongs to the Section State-of-the-Art Sensors Technologies)
  • Article
  • Open Access
16 Citations
3,645 Views
17 Pages

Rotating Instabilities in a Low-Speed Single Compressor Rotor Row with Varying Blade Tip Clearance

  • Xiangyi Chen,
  • Björn Koppe,
  • Martin Lange,
  • Wuli Chu and
  • Ronald Mailach

12 December 2021

When a compressor is throttled to the near stall point, rotating instability (RI) is often observed as significant increases of amplitude within a narrow frequency band which can be regarded as a pre-stall disturbance. In the current study, a single...

  • Article
  • Open Access
3 Citations
5,801 Views
22 Pages

Trapped Acoustic Modes in an Axial Multi-Stage Compressor Leading to Non-Synchronous Blade Vibrations

  • Anne-Lise Fiquet,
  • Stéphane Aubert,
  • Nicolas Buffaz,
  • Agathe Vercoutter and
  • Christoph Brandstetter

Non-synchronous blade vibrations have been observed in an experimental multi-stage high-speed compressor setup at part-speed conditions. A detailed numerical study has been carried out to understand the observed phenomenon by performing unsteady full...

  • Article
  • Open Access
7 Citations
2,899 Views
11 Pages

15 December 2020

This publication presents an assessment of the influence of a surface treatment such as shot-peening on the fatigue life of a compressor blade exposed to resonant vibrations. As part of the work, a geometric model of the blade was developed, and a nu...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
10 Citations
8,055 Views
12 Pages

This article reports on systematic numerical studies on an axial compressor stage with distorted inflow. Four operating points at two speedlines were simulated with an inflow distortion generated by a 120 ∘ -sector segment with a wedge-type cr...

  • Article
  • Open Access
1 Citations
2,979 Views
20 Pages

A Quasi-Direct Numerical Simulation of a Compressor Blade with Separation Bubbles and Inflow Turbulence

  • Guglielmo Vivarelli,
  • João Anderson Isler,
  • Chris D. Cantwell,
  • Francesco Montomoli and ,
  • Spencer J. Sherwin,
  • Yuri Frey-Marioni,
  • Marcus Meyer,
  • Iftekhar Naqavi and
  • Raul Vazquez-Diaz
  • + 4 authors+ 0 author

Within the turbomachinery industry, components are currently assessed deploying standard second-order steady solvers. These are unable to capture complicated unsteady phenomena that have a critical impact on component performance. In this work, the h...

  • Article
  • Open Access
2 Citations
1,187 Views
14 Pages

29 August 2025

Blade tip timing (BTT) is a core technique for investigating the blade vibration of large-scale centrifugal compressors, and identifying the parameters of blade asynchronous vibration is crucial for implementing blade condition monitoring based on th...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
2 Citations
3,320 Views
15 Pages

6 October 2024

In this study, stall flutter onset prediction in a transonic compressor is carried out using the (uncoupled) energy method with Fourier transform. As the study is conducted computationally using computational fluid dynamics (CFD)-based simulations, t...

(This article belongs to the Section Aeronautics)
  • Article
  • Open Access
7 Citations
2,994 Views
21 Pages

27 August 2022

The development of the aircraft industry seeks an increase in compressor loading, bringing unique flow phenomena and design problems; thus, insights into the ultrahigh loaded compressor are in great need. To reveal the loss characteristics of the ult...

(This article belongs to the Special Issue Computational Fluid Dynamics in Gas Turbines)

of 8