The membrane filtration with inside-out dead-end driven UF-/MF- capillary membranes is an effective process for particle removal in water treatment. Its industrial application increased in the last decade exponentially. To date, the research activiti...
In the present study, the membrane distillation (MD) process was studied with the use of commercial polytetrafluoroethylene (PTFE) capillary membranes. For this purpose, both solutions with NaCl concentrations up to 300 g/L and brines contaminated wi...
Efficient recovery of ammonia from sludge hydrolysate (SH) remains a challenging task. This study developed a superhydrophobic capillary ceramic-membrane contactors (MCs), which, by establishing a stable gas-phase mass transfer interface, provides a...
Membrane inlet mass spectrometry (MIMS) is commonly used for detecting the components in liquid samples. When a liquid sample flows through a membrane, certain analytes will permeate into the vacuum chamber of a mass spectrometer from the solution. T...
Point-of-care testing (POCT) techniques based on microfluidic devices enabled rapid and accurate tests on-site, playing an increasingly important role in public health. As the critical component of capillary-driven microfluidic devices for POCT use,...
Hemoconcentration membranes used in cardiopulmonary bypass require a pore structure design with high pure water permeability, which does not allow excessive protein adsorption and useful protein loss. However, studies on hemoconcentration membranes h...
Only nonwetted porous membranes can be used in membrane distillation. The possibility of application in this process the capillary polypropylene membranes manufactured by thermally-induced phase separation was studied. The performance of a few types...
Polytetrafluoroethylene (PTFE) capillary membranes, known for the great chemical resistance and thermal stability, are commonly used in membrane separation technologies. However, the strong hydrophobic property of PTFE limits its application in water...
The mechanical stability of conventional single-channel capillary fibres can be improved in a multi-channel geometry, which has previously found application in ultrafiltration. In this work, multi-channel polyethersulfone (PES) capillary membranes co...
The paper presents the sweeping gas membrane distillation realised by using the capillary module (length 1.1 m and area 0.1 m2) without housing (module shell). During the tests, the feed was flowing inside the hydrophobic polypropylene membranes. The...
This work aims to study the characterization of several membrane filters by using capillary flow porometry (CFP) and liquid extrusion porometry (LEP) to obtain their pore size distributions (PSD) and mean pore diameters (davg). Three polymeric membra...
Membrane emulsification technology has garnered increasing interest in emulsion preparation due to controllable droplet size, narrower droplet size distribution, low energy consumption, simple process design and excellent reproducibility. Nevertheles...
This study theoretically analyzes the mass transport through capillary, asymmetric, biocatalytic membrane reactor, where the diffusive plus convective mass transport is accompanied by biochemical reaction with Michaelis-Menten kinetics. An approach m...
This paper deals with the efficiency of capillary modules without an external housing, which were used as submerged modules in the membrane distillation process. The commercial hydrophobic capillary membranes fabricated for the microfiltration proces...
Composite nanoparticles were used in solid phase micro membrane tip extraction and capillary electrophoresis to determine phenol and p-amino-phenol in wastewater. The optimized conditions were 100 g/L concentration, 40 min contact time, 11 pH, 5 mg/m...
The main function of the lungs is oxygen transport from the atmosphere into the blood circulation, while it is necessary to keep the pulmonary tissue relatively free of pathogens. This is a difficult task because the respiratory system is constantly...
Liquid crystal flexoelectric actuation uses an imposed electric field to create membrane bending, this phenomenon is found in outer hair cells (OHC) located in the inner ear, whose role is to amplify sound through the generation of mechanical power....
Background: The tangential traction by idiopathic epiretinal membrane (iERM) may alter the hemodynamics of the macula. We investigated the correlation between visual acuity and the optical coherence tomography angiography (OCTA) parameters in unilate...
A primary target in the long-term microfiltration (MF) of fermentation broths is to ensure the high-quality permeate and stable system operation. This can be achieved by the choice of the most profitable membrane material and development of an effect...
The characterization of membranes is suitable to investigate changes in the membrane properties caused by Layer-by-Layer (LbL) modification. Besides permeability, rejection, and molecular-weight cut-off (MWCO), which give information about the modifi...
The key physical processes in polymeric filters used for the blood purification include transport across the capillary wall and the interaction of blood cells with the polymer membrane surface. Theoretical modeling of membrane transport is an importa...
Forward osmosis membranes are an emerging technology with great potential applicability in energy-efficient wastewater treatments and the differentiation between two solutions. Such solutions often differ in their concentrations or compositions. In t...
Freestanding, flexible and open through-hole polymeric micro- and nanostructured membranes were successfully fabricated over large areas (>16 cm2) via solvent removal of sacrificial scaffolds filled with polymer resin by spontaneous capillary flow...
The historical development of discoveries and conceptual frames for understanding the hemorrhagic activity induced by viperid snake venoms and by hemorrhagic metalloproteinases (SVMPs) present in these venoms is reviewed. Histological and ultrastruct...
Background/Objectives: This study aimed to investigate the correlation between macular flow density (FD) as well as foveal avascular zone (FAZ) characteristics and optic disc size, quantified by Bruch’s membrane opening area (BMOA). In addition...
High regeneration energy demand remains a critical barrier to the large-scale deployment of ethanolamine-based (MEA-based) CO2 capture. This study adopts an Al2O3 ceramic-membrane heat exchanger (CMHE) to recover both sensible and latent heat from th...
The paper presents a method for obtaining partially degradable capillary membranes from a polyethersulfone/polycaprolactone (PES/PCL) mixture. PES/PCL membranes were obtained by the phase inversion technique with dry/wet spinning and then subjected t...
24 November 2021
This study compared the effects of varying aerobic training programs on pulmonary diffusing capacity (TLCO), pulmonary diffusing capacity for nitric oxide (TLNO), lung capillary blood volume (Vc) and alveolar–capillary membrane diffusing capaci...
Background: Understanding vascular development and the key factors involved in regulating angiogenesis—the growth of new blood vessels from pre-existing vasculature—is crucial for developing therapeutic approaches to promote wound healing...
This work presents a novel, membrane-inspired hybrid framework composed of Ag2Mo3O10·1.8H2O nanowires grown in situ on carbon fiber cloth (CFC) for the continuous and selective recovery of high-value sulfur-containing molecules from organic wa...
The objective of the study reported in this research paper was to produce micellar casein concentrate (MCC) and milk protein concentrate (MPC) with 80% crude protein relative to total solids (TS) using MF and UF processes respectively. Additionally,...
The combined phase-inversion and sintering method not only produces ceramic hollow fibre membranes with much lower fabrication costs than conventional methods, but these membranes can also be designed to have greatly reduced transport resistances for...
The working principle of lateral flow assays, such as the widely used COVID-19 rapid tests, is based on the capillary-driven liquid transport of a sample fluid to a test line using porous polymeric membranes as the conductive medium. In order to pred...
The increasing research in the field of polymeric multi-channel membranes has shown that their mechanical stability is beneficial for a wide range of applications. The more complex interplay of formation process parameters compared to a single-channe...
Oily wastewaters are considered as one of the most dangerous types of environmental pollution. In the present study, the microfiltration (MF) process of model emulsions and real oily wastewaters was investigated. For this purpose, capillary polypropy...
Blood flow in the microcirculatory system is crucially affected by intrinsic red blood cell (RBC) properties, such as their deformability. In the smallest vessels of this network, RBCs adapt their shapes to the flow conditions. Although it is known t...
Conventional approaches to microscale actuation, such as electrostatic, have difficulty in achieving large motion at moderate voltages. Recently, actuators relying on the active control of capillary pressure have been demonstrated, with the pressure...
Polyether sulfone Multibore® ultrafiltration membranes were modified using polyelectrolyte multilayers via the layer-by-layer (LbL) technique in order to increase their rejection capabilities towards salts and antibiotic resistance genes. The mod...
Multiple tissue perfusion markers are described to guide therapy in critically ill pediatric patients undergoing congenital heart surgery. Given the advantages of capillary refill time, our goal is to determine its predictive capacity for mortality a...
Inner macular layers are the most involved in the retinal distortion caused by idiopathic epiretinal membrane (iERM). They represent the anatomical structures in which the superficial (SCP) and deep (DCP) capillary plexus are embedded. We quantified...
Water condensation is a possible cause of membrane wetting in the operation of membrane contactors, especially under high-temperature conditions. In this study, water condensation in pores of polytetrafluoroethylene (PTFE) hollow fiber membranes was...
This works aims to study the porous characterization of several commercial Gas Diffusion Layers (GDL). Three carbon-based porous GDL featuring a highly rigid microstructure of interconnected pores of several manufacturers were analyzed. Gas Liquid Di...
The review is devoted to the physical, chemical, and technological aspects of the breath-figure self-assembly process. The main stages of the process and impact of the polymer architecture and physical parameters of breath-figure self-assembly on the...
Flexoelectric liquid crystalline membranes immersed in asymmetric viscoelastic media is a material system model with physiological applications such as outer hair cells (OHCs), where membrane oscillations generate bulk flow. Motivated by this physiol...
1 February 1996
The alteration in glomerular basement membrane permeability associated with microangiopathy in streptozotocin-induced diabetic rats was studied by determining the movement across the glomerular basement membrane of anionic ferritin probes injected in...
The effect of talc addition on the morphology of capillary membranes formed by a thermally induced phase separation (TIPS) method was investigated in the presented work. The usability of such formed membranes for membrane distillation was evaluated....
The mechanisms underlying the effects of dapagliflozin in heart failure with reduced ejection fraction (HFrEF) are not yet fully understood. This study aims to evaluate the effect of the drug on cardiorespiratory function by assessing alveolar–...
Silt has the characteristics of developed capillary pores and strong water sensitivity, and capillary water is an important factor inducing the erosion and slumping of silt sites. Therefore, in order to suppress the effect of capillary water, this ar...
1 March 2002
Capillary hemangiomas are benign, vascular lesions of skin and mucous membranes that often occur in infancy and childhood. Capillary hemangiomas are most commonly found in the head and neck region. Capillary hemangiomas that occur in adults and on th...
In the present study, the membrane crystallizer was used to separate a saturated NaCl solution contaminated with an oil emulsion. The crystallizer was connected via a mesh separator with a feed tank in which capillary submerged modules were assembled...
of 8