In March 2020, an all-solid-state dual-wavelength narrow-band lidar system was deployed. A total of 226 nights spanning from March 2020 to July 2022 were employed in order to investigate the seasonal variations of calcium atoms and ions in the mesosp...
We report an all-solid-state narrowband lidar system for the simultaneous detection of Ca and Ca+ layers over Yanqing (40.41°N, 116.01°E). The uniqueness of this lidar lies in its transmitter, which is based on optical parametric oscillation...
Hydrocalumite structured layered double hydroxides (LDHs) with various Fe3+ ratios were prepared through a coprecipitation method. In order to control the Fe3+ content in LDH, binary Ca–Fe LDHs were first synthesized with various Ca/Fe ratios. The X-...
Atomic layer deposition (ALD) technology has unlocked new ways of manipulating the growth of inorganic materials. The fine control at the atomic level allowed by ALD technology creates the perfect conditions for the inclusion of new cationic or anion...
L-Cysteinate-intercalated CaAl-layered double hydroxide (LDH) was prepared by the co-precipitation method producing highly crystalline hydrocalumite phase with a well-pillared interlayer gallery. The obtained materials were characterized by X-ray dif...
Compound contamination of soil with heavy metals copper (Cu) and lead (Pb) triggered by mining development has become a serious problem. To solve this problem, in this paper, corncob kernel, which is widely available and inexpensive, was used as the...
The ability of TiO2 to generate reactive oxygen species under UV radiation makes it an efficient candidate in antimicrobial studies. In this context, the preparation of TiO2 microparticles coated with Ca- and Cu-based composite layers over which Cu(I...
In response to the rising global energy dilemma and associated environmental concerns, research into creating less hazardous solar technology has exploded. Due to their cost-effective fabrication process and exceptional optoelectronic properties, per...
The charge characteristics of montmorillonite have significant effects on its hydration and application performances. In this study, a molecular dynamics simulation method was used to study the influence of the charge position and charge density of m...
Phosphate tailings (PTs), a solid waste generated from phosphate flotation, are a low-grade phosphate resource rich in quartz and dolomite. Their long-term accumulation leads to both resource loss and environmental risks, making valorization increasi...
In this study, polyamide (PA) thin-film composite (TFC) nanofiltration membranes were fabricated via interfacial polymerization on cellulose acetate (CA)/poly(vinylidene fluoride) (PVDF) support layers. Several types of CA/PVDF supports were prepared...
Background/Objectives: Dual-layer stents (DLS) with micromesh technology may offer better protection from plaque protrusion compared to single-layer stents (SLS), but little data are available. The aim of this study is to compare clinical outcomes of...
High-speed railway track–bridge systems (HSRTBSs) in near-fault high-seismicity regions face combined threats from pulse-type seismic excitations, vertical earthquake components and track defects, which may trigger structural damage and deterio...
Land use and land cover change (LUCC) prediction of cities in Western China requires higher accuracy in quantitative demand and spatial layout because of complex challenges in balancing relationships between urban constructions and ecological develop...
In this paper, the lattice Boltzmann–cellular automata (LBM-CA) model with dynamic and static grids was used to study the growth of three-dimensional (3D) multidendrites under directional solidification with random preferred angles. In the static gri...
Reliable in situ quantification of interlayer mechanics in CRTS-II ballastless track slabs remains limited by the poor instrumentability of the CA mortar layer. This study implements a quasi-distributed fiber-optic sensing scheme by encapsulating FBG...
The urgent need to mitigate rising global CO2 emissions demands the development of efficient carbon capture technologies. This study addresses the persistent challenge of sintering-induced performance degradation in CaO-based sorbents during high-tem...
The dark brown mixture resulting from the autooxidation of catechinic acid (CA) (AOCA) has been reported to possess antiviral activity against Herpes Simplex Virus 1 and 2 (HSV-1 and HSV-2). Unfortunately, the constituents of AOCA were not separated...
Porous vaterite crystals of CaCO3 are extensively used for the fabrication of self-assembled polymer-based microparticles (capsules, beads, etc.) utilized for drug delivery and controlled release. The nature of the polymer used plays a crucial role a...
Ubiquitous Radar has become an essential tool for preventing bird strikes at airports, where accurate target classification is of paramount importance. The working mode of Ubiquitous Radar, which operates in track-then-identify (TTI) mode, provides b...
The recombinant bacterial surface layer (S-layer) protein rSbpA of Lysinibacillus sphaericus CCM 2177 is an ideal model system to study non-classical nucleation and growth of protein crystals at surfaces since the recrystallization process may be sep...
In sea urchins, the sequence of the cellular and molecular events characterizing the fertilization process has been intensively studied. We have learned that to activate the egg, the fertilizing sperm must undergo morphological modifications (the acr...
Celosiae Argentea Semen (CAS), derived from Celosia argentea L., is traditionally used in Korean and Chinese medicine to treat eye disorders and liver heat and is recognized in official Pharmacopeias. In contrast, Celosiae Cristatae Semen (CCS), desp...
Synthesis of biomimetic materials for implants and prostheses is a hot topic in nanobiotechnology strategies. Today the major approach of orthopaedic implants in hard tissue engineering is represented by titanium implants. A comparative study of hybr...
Hydrophobic magnetic nanoparticles (NPs) consisting of undecanoate-cappedmagnetite (Fe3O4, average diameter ca. 5 nm) are used to control quantized electron transferto surface-confined redox units and metal NPs. A two-phase system consisting of anaqu...
Biodiesel production from waste cooking oils, non-edible oils and other low-grade lipid feedstocks is constrained by free fatty acids, water, salts, oxidation products, and the poor miscibility of triglycerides with short-chain alcohols. Carbon&ndash...
The vitelline layer (VL) of a sea urchin egg is an intricate meshwork of glycoproteins that intimately ensheathes the plasma membrane. During fertilization, the VL plays important roles. Firstly, the receptors for sperm reside on the VL. Secondly, fo...
A new photocatalytic hydroxyapatite (HA) synthesis method has been developed. This method is based on the unique ability of the TiO2 photocatalyst to decompose the Ca(EDTA) complex under UV illumination. As a result, released Ca2+ ions react with PO4...
Polyvinylidene fluoride (PVDF) films are widely used in sensors for their wide response frequency, good flexibility, low acoustic impedance, and chemical stability. In this work, PVDF/CaCl2 piezoelectric films were prepared by an electro-assisted 3D...
Due to their reliability, affordability and high safety, rechargeable aqueous zinc ion batteries (ZIBs) have garnered a lot of attention. Nevertheless, undesirable long-term cycle performance and the inadequate energy density of cathode materials imp...
This present work aimed to investigate the influence of CO2 on HCl removal using calcined Ca–Mg–Al layered double hydroxides (CaMgAl-LDHs) at medium–high temperature (400–800 °C) in a fixed-bed reactor. It was revealed tha...
CaCO3 spherulites were found in the myostracum layer of common limpet shells collected from East Sands, St Andrews, Scotland. Their microstructures were revealed by using powder X-ray diffraction, scanning electron microscopy, high-resolution transmi...
This work aimed to investigate the CO2 gas barrier and mechanical properties of fluorine rubber nanocomposites filled with Ca/Al layered hydroxide (graphene oxide [GO]/LDH-Ca2Al) modified by GO. GO/LDH-Ca2Al nanocomposite fillers were prepared by dep...
Dispersion-corrected density functional theory (DFT) calculations reveal that the layered electride of dicalcium nitride (Ca2N) exhibits stronger interlayer binding interactions but lower interlayer friction behavior than that of traditional layered...
Marine cyanobacterial mats were cultured on coastal sediments (Nivå Bay, Øresund, Denmark) for over three years in a closed system. Carbonate particles formed in two different modes in the mat: (i) through precipitation of submicrometer-sized grains...
The contents of alkali and alkaline earth metals are higher in Zhundong coal, and there are serious problems of slagging and fouling during the combustion process. Therefore, it is of great significance to reveal the mechanism of slagging and fouling...
Powdered layered double hydroxide (CaFe-LDH) was synthesized via hydrothermal co-precipitation, demonstrating successful preparation upon characterization. Subsequently, experiments were conducted to assess its efficacy in immobilizing divalent cadmi...
We have successfully prepared layered double hydroxide (LDH) nanomaterials containing calcium and aluminum ions in the framework (CaAl-LDH). The surface of CaAl-LDH was coated with enteric polymer, Eudragit®L 100 in order to protect nanomaterials fr...
Layered double hydroxides (LDHs) present multiple applications due to their versatility and reactivity. Thus, Ca–Al LDHs with Friedel’s salt structure (HC) have been proposed as heavy metal scavengers due to their buffering capacity at ba...
CaMgAl-layered double hydroxides (CaMgAl-LDHs) were synthesized by a co-precipitation method to prepare sodium oleate-modified, borate-intercalated CaMgAl-LDHs (O-CaMgAl-LDHs) using in-situ intercalation and modification, and the LDHs samples were ch...
A long period grating (LPG) modified with a mesoporous film infused with a calixarene as a functional compound was employed for the detection of individual volatile organic compounds (VOCs) and their mixtures. The mesoporous film consisted of an inor...
Thin films of the catalytically interesting ternary and quaternary perovskites GdCoO3 and Gd0.9Ca0.1CoO3 are fabricated by atomic layer deposition using metal β-diketonates and ozone as precursors. The resulting thin films are amorphous as depos...
In this study, the reconstruction peculiarities of sol–gel derived Mg2−xMx/Al1 (M = Ca, Sr, Ba) layered double hydroxides were investigated. The mixed metal oxides (MMO) were synthesized by two different routes. Firstly, the MMO were obta...
In the present work, an in-depth study on the sol-gel process for the fabrication of Eu-doped CaF2 materials in the form of thin films has been addressed for the production of down-shifting layers. Fine-tuning of the operative parameters, such as the...
CaTiO3 films with an average thickness of 0.5 nm were deposited onto γ-Al2O3 by Atomic Layer Deposition (ALD) and then characterized by a range of techniques, including X-ray Diffraction (XRD) and High-Resolution, Transmission Electron Microscopy (HR...
In this study, the Ca33Mg9Al13Si45 layer was fabricated on the SiCf/SiC surface by APS to simulate the coexistence of high-velocity impact and molten-state deposition. Subsequently, the corrosion and infiltration behaviors of the molten Ca33Mg9Al13Si...
CaAl-layered double hydroxides (LDHs) exhibit different mechanisms of borate removal at varying calcination temperatures. The addition of Mg alters the structure and composition of the calcined products, ultimately impacting their adsorption process....
Calcium–magnesium–alumina–silicate (CMAS), as an environmental deposit, deposits on engine components and causes serious damage to traditional thermal barrier coatings (TBCs) at high temperatures. The rare-earth silicate apatite den...
Using a co-precipitation technique, the anionic form of sulisobenzone (benzophenone-4) sunscreen ingredient was incorporated into the interlayer space of CaFe-hydrocalumite for the first time. Using detailed post-synthetic millings of the photoprotec...
Semiconductor layers employed in fabricating advanced node devices are becoming thinner and their electrical properties are diverging from those established for highly crystalline standards. Since these properties also change as a function of depth w...
of 46