Skip to Content

95 Results Found

  • Review
  • Open Access
30 Citations
12,115 Views
35 Pages

Open-Source 3D Printing in the Prosthetic Field—The Case of Upper Limb Prostheses: A Review

  • Kevin Wendo,
  • Olivier Barbier,
  • Xavier Bollen,
  • Thomas Schubert and ,
  • Thierry Lejeune,
  • Benoit Raucent and
  • Raphael Olszewski
  • + 2 authors+ 0 author

Upper limb loss alters individuals’ private and professional life. Prosthetic devices are thus a solution to supply the missing upper limb segments. Nevertheless, commercial prostheses are often unaffordable, or inaccessible, to underprivileged...

(This article belongs to the Section Advanced Manufacturing)
  • Article
  • Open Access
13 Citations
3,208 Views
26 Pages

Experimental Evaluation of Extended Reality Technologies in the Development of Individualized Three-Dimensionally Printed Upper Limb Prostheses

  • Filip Górski,
  • Remigiusz Łabudzki,
  • Magdalena Żukowska,
  • Filippo Sanfilippo and ,
  • Morten Ottestad,
  • Martin Zelenay,
  • Diana-Irinel Băilă and
  • Razvan Pacurar
  • + 3 authors+ 0 author

10 July 2023

This paper presents results from experimental studies that assess the utilization of virtual, augmented, and mixed reality (VR, AR, MR) at different stages of developing personalized 3D printed upper limb prostheses for adult patients. The prostheses...

  • Systematic Review
  • Open Access
37 Citations
22,872 Views
24 Pages

Upper Limb Prostheses by the Level of Amputation: A Systematic Review

  • Diego Segura,
  • Enzo Romero,
  • Victoria E. Abarca and
  • Dante A. Elias

19 March 2024

This review article aims to provide an updated and comprehensive overview of the latest trends in adult upper limb prostheses, specifically targeting various amputation levels such as transradial, transmetacarpal, transcarpal, and transhumeral. A sys...

(This article belongs to the Section Orthopedics and Rehabilitation)
  • Feature Paper
  • Review
  • Open Access
60 Citations
19,048 Views
21 Pages

Myoelectric Control for Upper Limb Prostheses

  • Carles Igual,
  • Luis A. Pardo,
  • Janne M. Hahne and
  • Jorge Igual

30 October 2019

State-of-the-art high-end prostheses are electro-mechanically able to provide a great variety of movements. Nevertheless, in order to functionally replace a human limb, it is essential that each movement is properly controlled. This is the goal of pr...

(This article belongs to the Section Bioelectronics)
  • Review
  • Open Access
8 Citations
3,727 Views
12 Pages

Surgical Outcomes and Complications of Custom-Made Prostheses in Upper Limb Oncological Reconstruction: A Systematic Review

  • Camillo Fulchignoni,
  • Silvia Pietramala,
  • Ivo Lopez,
  • Giovan Giuseppe Mazzella and ,
  • Chiara Comisi,
  • Carlo Perisano,
  • Lorenzo Rocchi and
  • Tommaso Greco
  • + 3 authors+ 0 author

Bone tumors of the upper limb are a common cause of bone pain and pathological fractures in both old and young populations. Surgical reconstruction and limb salvage have become valid options for these patients despite this kind of surgery being chall...

(This article belongs to the Section Functional Anatomy and Musculoskeletal System)
  • Review
  • Open Access
6 Citations
7,528 Views
31 Pages

Applying 3D Scanning and Printing Techniques to Produce Upper Limb Prostheses: Bibliometric Analysis and Scoping Review

  • Nico Chainando,
  • Marcel Martawidjaja,
  • Raphael Albert Darius,
  • Leonardo Carlos Yahya and ,
  • Sharon Yemima,
  • Wilson Susanto Tan,
  • Christian Harito,
  • Rafa Callista Chandra,
  • Grasheli Kusuma Andhini and
  • Muhammad Syafrudin
  • + 8 authors+ 3 authors

Background/Objectives: Three-dimensional scanning and printing techniques have gained prominence in the fabrication of upper limb prostheses. This paper provides an overview of various studies on the current utilization of 3D scanning and 3D printing...

  • Feature Paper
  • Article
  • Open Access
7 Citations
4,298 Views
9 Pages

Evaluation of Optimal Vibrotactile Feedback for Force-Controlled Upper Limb Myoelectric Prostheses

  • Andrea Gonzalez-Rodriguez,
  • Jose L. Ramon,
  • Vicente Morell,
  • Gabriel J. Garcia and ,
  • Jorge Pomares,
  • Carlos A. Jara and
  • Andres Ubeda
  • + 2 authors+ 0 author

28 November 2019

The main goal of this study is to evaluate how to optimally select the best vibrotactile pattern to be used in a closed loop control of upper limb myoelectric prostheses as a feedback of the exerted force. To that end, we assessed both the selection...

(This article belongs to the Special Issue Assistance Robotics and Biosensors 2019)
  • Article
  • Open Access
5 Citations
3,732 Views
14 Pages

11 August 2025

Upper-limb motor disabilities and amputation pose a significant burden on individuals, hindering their ability to perform daily activities independently. While various research studies aim to enhance the performance of current upper-limb prosthetic d...

(This article belongs to the Special Issue Intelligent Systems, Robots and Devices for Healthcare and Rehabilitation)
  • Article
  • Open Access
2 Citations
4,275 Views
19 Pages

Donning/Doffing and Arm Positioning Influence in Upper Limb Adaptive Prostheses Control

  • Carles Igual,
  • Andrés Camacho,
  • Enrique J. Bernabeu and
  • Jorge Igual

22 April 2020

New upper limb prostheses controllers are continuously being proposed in the literature. However, most of the prostheses commonly used in the real world are based on very old basic controllers. One reason to explain this reluctance to change is the l...

(This article belongs to the Section Applied Biosciences and Bioengineering)
  • Article
  • Open Access
1,375 Views
15 Pages

Evaluating the Suitability of Additive Manufacturing for Fabricating Prosthetic Fingers in Upper Limb Prostheses

  • Yuliia Denysenko,
  • Filip Górski,
  • Răzvan Păcurar,
  • Natalia Soczyńska and
  • Radosław Wichniarek

31 October 2025

The development of cosmetic prostheses benefits significantly from the integration of additive manufacturing technologies, which offer new possibilities for personalization, rapid production, and cost efficiency. This study explores the potential of...

(This article belongs to the Special Issue Smart and Sustainable Additive Manufacturing: Emerging Technologies and Applications)
  • Article
  • Open Access
5 Citations
8,133 Views
18 Pages

Testing the Use of Advanced Upper Limb Prostheses: Towards Quantifying the Movement Quality with Inertial-Magnetic Measurement Units

  • Andreas W. Franzke,
  • Morten B. Kristoffersen,
  • Dario Farina,
  • Corry K. van der Sluis and ,
  • Raoul M. Bongers and
  • Alessio Murgia
  • + 1 author+ 0 author

24 February 2023

Background: A thorough assessment of upper limb prostheses could help facilitate their transfer from scientific developments into the daily lives of users. Ideally, routine clinical testing would include assessments of upper limb function using motio...

(This article belongs to the Special Issue Design, Control, and Biomechanics of Prosthetic Limbs)
  • Article
  • Open Access
4 Citations
3,565 Views
17 Pages

Automation of wrist rotations in upper limb prostheses allows simplification of the human–machine interface, reducing the user’s mental load and avoiding compensatory movements. This study explored the possibility of predicting wrist rota...

(This article belongs to the Special Issue Bionic Technology – Robotic Exoskeletons and Prostheses)
  • Review
  • Open Access
17 Citations
12,684 Views
46 Pages

Emerging Frontiers in Robotic Upper-Limb Prostheses: Mechanisms, Materials, Tactile Sensors and Machine Learning-Based EMG Control: A Comprehensive Review

  • Beibit Abdikenov,
  • Darkhan Zholtayev,
  • Kanat Suleimenov,
  • Nazgul Assan and ,
  • Kassymbek Ozhikenov,
  • Aiman Ozhikenova,
  • Nurbek Nadirov and
  • Akim Kapsalyamov
  • + 3 authors+ 0 author

22 June 2025

Hands are central to nearly every aspect of daily life, so losing an upper limb due to amputation can severely affect a person’s independence. Robotic prostheses offer a promising solution by mimicking many of the functions of a natural arm, le...

(This article belongs to the Section Wearables)
  • Article
  • Open Access
3 Citations
4,576 Views
24 Pages

7 November 2021

Over the last few decades, pattern recognition algorithms have shown promising results in the field of upper limb prostheses myoelectric control and are now gradually being incorporated in commercial devices. A widely used approach is based on a clas...

(This article belongs to the Special Issue Objective Measurement of Movement, Human Physiology and Physical Activity Using Sensors)
  • Article
  • Open Access
40 Citations
20,993 Views
32 Pages

An Insulated Flexible Sensor for Stable Electromyography Detection: Application to Prosthesis Control

  • Theresa Roland,
  • Kerstin Wimberger,
  • Sebastian Amsuess,
  • Michael Friedrich Russold and
  • Werner Baumgartner

24 February 2019

Electromyography (EMG), the measurement of electrical muscle activity, is used in a variety of applications, including myoelectric upper-limb prostheses, which help amputees to regain independence and a higher quality of life. The state-of-the-art se...

(This article belongs to the Special Issue EMG Sensors and Applications)
  • Review
  • Open Access
33 Citations
9,053 Views
19 Pages

8 February 2023

This paper presents a critical review and comparison of the results of recently published studies in the fields of human–machine interface and the use of sonomyography (SMG) for the control of upper limb prothesis. For this review paper, a comb...

(This article belongs to the Special Issue Wearable & Soft Robotics Technologies and Beyond)
  • Review
  • Open Access
36 Citations
9,657 Views
32 Pages

Control Strategies and Performance Assessment of Upper-Limb TMR Prostheses: A Review

  • Federico Mereu,
  • Francesca Leone,
  • Cosimo Gentile,
  • Francesca Cordella and ,
  • Emanuele Gruppioni and
  • Loredana Zollo
  • + 1 author+ 0 author

10 March 2021

The evolution of technological and surgical techniques has made it possible to obtain an even more intuitive control of multiple joints using advanced prosthetic systems. Targeted Muscle Reinnervation (TMR) is considered to be an innovative and relev...

(This article belongs to the Special Issue On the Applications of EMG Sensors and Signals)
  • Review
  • Open Access
6 Citations
6,739 Views
25 Pages

The Technological and Psychological Aspects of Upper Limb Prostheses Abandonment: A Narrative Review

  • Riccardo Collu,
  • Elena Ferrazzano,
  • Verdiana Murgia,
  • Cinzia Salis and
  • Massimo Barbaro

17 December 2025

The loss of a limb is an event that significantly affects an individual’s quality of life, with implications not only for autonomy in daily activities but also for their ability to interact with others. At the same time, current prostheses ofte...

  • Review
  • Open Access
155 Citations
17,482 Views
27 Pages

EEG-Based Control for Upper and Lower Limb Exoskeletons and Prostheses: A Systematic Review

  • Maged S. AL-Quraishi,
  • Irraivan Elamvazuthi,
  • Siti Asmah Daud,
  • S. Parasuraman and
  • Alberto Borboni

7 October 2018

Electroencephalography (EEG) signals have great impact on the development of assistive rehabilitation devices. These signals are used as a popular tool to investigate the functions and the behavior of the human motion in recent research. The study of...

(This article belongs to the Special Issue Sensor Applications in Medical Monitoring and Assistive Devices)
  • Article
  • Open Access
14 Citations
4,132 Views
24 Pages

Force-Invariant Improved Feature Extraction Method for Upper-Limb Prostheses of Transradial Amputees

  • Md. Johirul Islam,
  • Shamim Ahmad,
  • Fahmida Haque,
  • Mamun Bin Ibne Reaz and ,
  • Mohammad Arif Sobhan Bhuiyan and
  • Md. Rezaul Islam
  • + 1 author+ 0 author

A force-invariant feature extraction method derives identical information for all force levels. However, the physiology of muscles makes it hard to extract this unique information. In this context, we propose an improved force-invariant feature extra...

(This article belongs to the Section Pathology and Molecular Diagnostics)
  • Article
  • Open Access
31 Citations
6,544 Views
20 Pages

A Multimodal Intention Detection Sensor Suite for Shared Autonomy of Upper-Limb Robotic Prostheses

  • Marcus Gardner,
  • C. Sebastian Mancero Castillo,
  • Samuel Wilson,
  • Dario Farina and ,
  • Etienne Burdet,
  • Boo Cheong Khoo,
  • S. Farokh Atashzar and
  • Ravi Vaidyanathan
  • + 3 authors+ 0 author

27 October 2020

Neurorobotic augmentation (e.g., robotic assist) is now in regular use to support individuals suffering from impaired motor functions. A major unresolved challenge, however, is the excessive cognitive load necessary for the human–machine interf...

(This article belongs to the Special Issue Wearable Sensor for Activity Analysis and Context Recognition)
  • Perspective
  • Open Access
1 Citations
6,098 Views
30 Pages

A Perspective on Rehabilitation Through Open-Source Low-Cost 3D-Printed Distal to the Wrist Joint Transitional Prosthetics: Towards Autonomous Hybrid Devices

  • Florin-Felix Răduică,
  • Ionel Simion,
  • Ioana-Cătălina Enache,
  • Elena Narcisa Valter and
  • Alessandro Naddeo

5 December 2024

Over the years, patients with partial hand loss have relied on expensive prosthetics to recover some of the hand functionality. Fortunately, advancements in additive manufacturing desktop solutions allow transitional prosthetics prices to decrease. T...

(This article belongs to the Special Issue Design Methodology for Soft Mechanisms, Machines, and Robots)
  • Article
  • Open Access
20 Citations
5,383 Views
14 Pages

13 May 2019

Conventional myoelectric controllers provide a mapping between electromyographic signals and prosthetic functions. However, due to a number of instabilities continuously challenging this process, an initial mapping may require an extended calibration...

(This article belongs to the Special Issue Assistance Robotics and Biosensors 2019)
  • Review
  • Open Access
6 Citations
6,780 Views
18 Pages

Shaping the Future of Upper Extremity Prostheses Through 3D Printing

  • Said Dababneh,
  • Nadine Dababneh,
  • Chenrui Xie,
  • Hanna Henchi and
  • Johnny I. Efanov

Introduction: Additive manufacturing has emerged as a promising solution for improving the accessibility and affordability of upper limb prostheses. Despite the growing need, traditional prosthetic devices remain costly and often inaccessible, partic...

  • Systematic Review
  • Open Access
12 Citations
6,090 Views
14 Pages

The Current State of 3D-Printed Prostheses Clinical Outcomes: A Systematic Review

  • Huthaifa Atallah,
  • Titeana Qufabz,
  • Rabee Naeem,
  • Hadeel R. Bakhsh and ,
  • Giorgio Ferriero,
  • Dorottya Varga,
  • Evelin Derkács and
  • Bálint Molics
  • + 3 authors+ 0 author

Introduction: 3D-printing is an emerging technology in the field of prosthetics, offering advantages such as cost-effectiveness, ease of customization, and improved accessibility. While previous reviews have focused on limited aspects, the aim of thi...

(This article belongs to the Section Biomaterials and Devices for Healthcare Applications)
  • Editorial
  • Open Access
2 Citations
3,544 Views
3 Pages

Assistance Robotics and Biosensors 2019

  • Andrés Úbeda,
  • Fernando Torres and
  • Santiago T. Puente

29 February 2020

This Special Issue is focused on breakthrough developments in the field of assistive and rehabilitation robotics. The selected contributions include current scientific progress from biomedical signal processing and cover applications to myoelectric p...

(This article belongs to the Special Issue Assistance Robotics and Biosensors 2019)
  • Article
  • Open Access
8 Citations
8,879 Views
13 Pages

9 August 2021

Commercial multi-degrees-of-freedom (multi-DOF) myoelectric hand prostheses can perform various hand gestures and grip motions using multiple DOFs. However, as most upper limb amputees have less than two electromyogram (EMG) signals generated at the...

  • Review
  • Open Access
1 Citations
2,597 Views
11 Pages

Functional and Rehabilitative Outcomes of Patients Affected by Bone Cancer of the Upper Limb Treated with MUTARS Prosthesis: A Narrative Review

  • Sefora Codazza,
  • Paola Emilia Ferrara,
  • Adelaide Aprovitola,
  • Mariantonietta Ariani and ,
  • Fabiana La Cagnina,
  • Daniele Coraci,
  • Giorgio Ferriero and
  • Gianpaolo Ronconi
  • + 3 authors+ 0 author

13 March 2024

Megaprostheses are well-known, reliable, and effective reconstruction prostheses used in oncologic surgery for limb salvage in patients affected by primary or metastatic bone tumors. Rehabilitation plays a major role after MUTARS replacement, with th...

(This article belongs to the Special Issue Musculoskeletal Rehabilitation: Current Challenges and New Perspectives)
  • Article
  • Open Access
8 Citations
5,977 Views
18 Pages

Design and Assessment of Bird-Inspired 3D-Printed Models to Evaluate Grasp Mechanics

  • Pavan Senthil,
  • Om Vishanagra,
  • John Sparkman,
  • Peter Smith and
  • Albert Manero

Adapting grasp-specialized biomechanical structures into current research with 3D-printed prostheses may improve robotic dexterity in grasping a wider variety of objects. Claw variations across various bird species lend biomechanical advantages for g...

(This article belongs to the Special Issue Bionic Technology—Robotic Exoskeletons and Prostheses: 2nd Edition)
  • Article
  • Open Access
9 Citations
4,541 Views
15 Pages

25 July 2024

Pattern recognition (PR)-based myoelectric control systems can naturally provide multifunctional and intuitive control of upper limb prostheses and restore lost limb function, but understanding their robustness remains an open scientific question. Th...

(This article belongs to the Special Issue EMG Sensors and Signal Processing Technologies)
  • Article
  • Open Access
12 Citations
4,970 Views
14 Pages

A Cost-Effective Inertial Measurement System for Tracking Movement and Triggering Kinesthetic Feedback in Lower-Limb Prosthesis Users

  • McNiel-Inyani Keri,
  • Ahmed W. Shehata,
  • Paul D. Marasco,
  • Jacqueline S. Hebert and
  • Albert H. Vette

6 March 2021

Advances in lower-limb prosthetic technologies have facilitated the restoration of ambulation; however, users of such technologies still experience reduced balance control, also due to the absence of proprioceptive feedback. Recent efforts have demon...

(This article belongs to the Special Issue Wearable Inertial Sensors)
  • Systematic Review
  • Open Access
6 Citations
3,716 Views
23 Pages

22 January 2026

Background: Upper limb loss has a profound impact on individuals’ daily activities, self-image, and social interactions. Despite continuous technological advances in upper-limb prosthetics, high rates of device abandonment persist, highlighting...

(This article belongs to the Special Issue Muscle Activity Sensing for Prosthesis Control and Human-Computer Interaction)
  • Article
  • Open Access
1 Citations
2,674 Views
32 Pages

31 March 2025

This study is part of the research project Dep-Project: Design and Embodiment of Wearable Prostheses, funded by the Foundation for Science and Technology (FCT), whose main objective is the development of wearable myoelectric prostheses for upper limb...

(This article belongs to the Section Smart Manufacturing System Design)
  • Technical Note
  • Open Access
18 Citations
21,931 Views
20 Pages

29 July 2022

Globally, the most popular upper-limb prostheses are powered by the human body. For body-powered (BP) upper-limb prostheses, control is provided by changing the tension of (Bowden) cables to open or close the terminal device. This technology has been...

  • Review
  • Open Access
27 Citations
7,529 Views
33 Pages

Sensor Architectures and Technologies for Upper Limb 3D Surface Reconstruction: A Review

  • Alessandro Paoli,
  • Paolo Neri,
  • Armando V. Razionale,
  • Francesco Tamburrino and
  • Sandro Barone

18 November 2020

3D digital models of the upper limb anatomy represent the starting point for the design process of bespoke devices, such as orthoses and prostheses, which can be modeled on the actual patient’s anatomy by using CAD (Computer Aided Design) tools...

(This article belongs to the Section Intelligent Sensors)
  • Article
  • Open Access
17 Citations
5,660 Views
13 Pages

A User-Driven Approach to Prosthetic Upper Limb Development in Korea

  • Naan Ju,
  • Kyu-Hye Lee,
  • Myoung-Ok Kim and
  • Youngjin Choi

Despite recent significant advances in technology and medicine, the number of patients who undergo amputation of body parts for various reasons continues to increase. Assistive devices such as prosthetic arms can enable limited activities in upper li...

(This article belongs to the Special Issue Ergonomics Study in Healthcare Assistive Tools and Services)
  • Article
  • Open Access
14 Citations
3,828 Views
9 Pages

Custom-Made 3D-Printed Implants as Novel Approach to Reconstructive Surgery after Oncologic Resection in Pediatric Patients

  • Giovanni Beltrami,
  • Gabriele Ristori,
  • Anna Maria Nucci,
  • Alberto Galeotti and ,
  • Angela Tamburini,
  • Guido Scoccianti,
  • Domenico Campanacci,
  • Marco Innocenti and
  • Rodolfo Capanna
  • + 4 authors+ 0 author

4 March 2021

Recently, custom-made 3D-printed prostheses have been introduced for limb salvage surgery in adult patients, but their use has not been described in pediatric patients. A series of 11 pediatric patients (mean age 10.8 years; range 2–13) with skeletal...

(This article belongs to the Special Issue Oncological Orthopedics: An Overview on Management on Bone Tumors and Bone Metastases)
  • Technical Note
  • Open Access
1 Citations
1,346 Views
18 Pages

The Design of a Multi-Finger Actuated Breathing-Powered Upper Limb Prosthesis

  • Iñigo De La Joya,
  • Jhonatan da Ponte Lopes and
  • Jeroen H. M. Bergmann

Upper limb deficiencies can limit the range of tasks children can perform. Current prosthetics provide overall good performance to increase the activities that users can complete, but challenges remain. Body- or electrically powered prostheses strugg...

(This article belongs to the Section Orthopedics and Rehabilitation)
  • Article
  • Open Access
3 Citations
2,480 Views
20 Pages

The human wrist affects the ability to efficiently perform many manipulation tasks. Despite this, most upper-limb prostheses are focused on the hand’s mobility, which makes users compensate for the lost wrist mobility with complex manipulation...

(This article belongs to the Special Issue Human-Inspired Grasp Control in Robotics)
  • Article
  • Open Access
26 Citations
5,309 Views
15 Pages

24 July 2018

Electromyogram (EMG)-based Pattern Recognition (PR) systems for upper-limb prosthesis control provide promising ways to enable an intuitive control of the prostheses with multiple degrees of freedom and fast reaction times. However, the lack of robus...

(This article belongs to the Special Issue EEG Electrodes)
  • Article
  • Open Access
63 Citations
6,957 Views
26 Pages

Study on Properties of Automatically Designed 3D-Printed Customized Prosthetic Sockets

  • Filip Górski,
  • Radosław Wichniarek,
  • Wiesław Kuczko and
  • Magdalena Żukowska

12 September 2021

This paper presents the results of experiments conducted on a batch of additively manufactured customized prosthetic sockets for upper limbs, made of thermoplastics and designed automatically on the basis of a 3D-scanned limb of a 3-year-old patient....

(This article belongs to the Collection 3D Printing in Medicine and Biomedical Engineering)
  • Review
  • Open Access
56 Citations
12,784 Views
17 Pages

Analysis of Man-Machine Interfaces in Upper-Limb Prosthesis: A Review

  • José Ribeiro,
  • Francisco Mota,
  • Tarique Cavalcante,
  • Ingrid Nogueira and ,
  • Victor Gondim,
  • Victor Albuquerque and
  • Auzuir Alexandria
  • + 2 authors+ 0 author

21 February 2019

This paper compiles and analyzes some of the most current works related to upper limb prosthesis with emphasis on man-machine interfaces. A brief introduction of the basic subjects is given to explain what a prosthesis is, what types of prostheses ex...

(This article belongs to the Section Medical Robotics and Service Robotics)
  • Article
  • Open Access
3 Citations
2,780 Views
19 Pages

Head and Voice-Controlled Human-Machine Interface System for Transhumeral Prosthesis

  • Ludwin Molina Arias,
  • Marek Iwaniec,
  • Paulina Pirowska,
  • Magdalena Smoleń and
  • Piotr Augustyniak

24 November 2023

The design of artificial limbs is a research topic that has, over time, attracted considerable interest from researchers in various fields of study, such as mechanics, electronics, robotics, and neuroscience. Continuous efforts are being made to buil...

(This article belongs to the Special Issue Advances in Swarm Intelligence, Data Science and Their Applications, 2nd Edition)
  • Article
  • Open Access
4 Citations
7,231 Views
16 Pages

Developing a Novel Prosthetic Hand with Wireless Wearable Sensor Technology Based on User Perspectives: A Pilot Study

  • Yukiyo Shimizu,
  • Takahiko Mori,
  • Kenichi Yoshikawa,
  • Daisuke Katane and ,
  • Hiroyuki Torishima,
  • Yuki Hara,
  • Arito Yozu,
  • Masashi Yamazaki,
  • Yasushi Hada and
  • Hirotaka Mutsuzaki
  • + 5 authors+ 0 author

26 April 2024

Myoelectric hands are beneficial tools in the daily activities of people with upper-limb deficiencies. Because traditional myoelectric hands rely on detecting muscle activity in residual limbs, they are not suitable for individuals with short stumps...

(This article belongs to the Special Issue Challenges and Future Trends of Wearable Robotics—2nd Edition)
  • Article
  • Open Access
12 Citations
4,629 Views
20 Pages

Evaluation of User-Prosthesis-Interfaces for sEMG-Based Multifunctional Prosthetic Hands

  • Julio Fajardo,
  • Guillermo Maldonado,
  • Diego Cardona,
  • Victor Ferman and
  • Eric Rohmer

26 October 2021

The complexity of the user interfaces and the operating modes present in numerous assistive devices, such as intelligent prostheses, influence patients to shed them from their daily living activities. A methodology to evaluate how diverse aspects imp...

(This article belongs to the Special Issue Machine Learning and Multimodal Sensing for Smart Wearable Assistive Robotics)
  • Article
  • Open Access
150 Citations
34,850 Views
15 Pages

Implementation of 3D Printing Technology in the Field of Prosthetics: Past, Present, and Future

  • Albert Manero,
  • Peter Smith,
  • John Sparkman,
  • Matt Dombrowski and ,
  • Dominique Courbin,
  • Anna Kester,
  • Isaac Womack and
  • Albert Chi
  • + 3 authors+ 0 author

There is an interesting and long history of prostheses designed for those with upper-limb difference, and yet issues still persist that have not yet been solved. Prosthesis needs for children are particularly complex, due in part to their growth rate...

(This article belongs to the Special Issue Quality of Life: The Interplay between Human Behaviour, Technology and the Environment)
  • Article
  • Open Access
14 Citations
4,010 Views
15 Pages

Ambulation Mode Classification of Individuals with Transfemoral Amputation through A-Mode Sonomyography and Convolutional Neural Networks

  • Rosemarie Murray,
  • Joel Mendez,
  • Lukas Gabert,
  • Nicholas P. Fey and ,
  • Honghai Liu and
  • Tommaso Lenzi
  • + 1 author+ 0 author

1 December 2022

Many people struggle with mobility impairments due to lower limb amputations. To participate in society, they need to be able to walk on a wide variety of terrains, such as stairs, ramps, and level ground. Current lower limb powered prostheses requir...

(This article belongs to the Special Issue Wearable Sensors and Machine Learning in the Biomechanics of Human Movement)
  • Review
  • Open Access
25 Citations
21,637 Views
29 Pages

Advances in Finger and Partial Hand Prosthetic Mechanisms

  • Erasmo Difonzo,
  • Giovanni Zappatore,
  • Giacomo Mantriota and
  • Giulio Reina

1 October 2020

Approximately 70% of the upper extremity amputations refers to partial hand loss with the involvement of one or more fingers. Historically, this type of limb amputation has been addressed adopting simple opposition designs that use the movement of th...

(This article belongs to the Special Issue Feature Papers 2020)
  • Case Report
  • Open Access
1 Citations
2,976 Views
12 Pages

Coxiella burnetii Femoro-Popliteal Bypass Infection: A Case Report

  • Farah Azouzi,
  • Louis Olagne,
  • Sophie Edouard,
  • Serge Cammilleri and ,
  • Pierre-Edouard Magnan,
  • Pierre-Edouard Fournier and
  • Matthieu Million
  • + 2 authors+ 0 author

Cardiovascular infections are the most severe and potentially lethal among the persistent focalized Coxiella burnetii infections. While aortic infections on aneurysms or prostheses are well-known, with specific complications (risk of fatal rupture),...

(This article belongs to the Special Issue Intracellular Bacteria: From Basic Research to Clinics 2.0)
  • Article
  • Open Access
2 Citations
1,214 Views
18 Pages

Background: Sitting and standing with conventional hip–knee–ankle–foot (HKAF) prostheses are demanding tasks for hip disarticulation (HD) amputees due to the passive nature of current prosthetic hip joints that cannot assist with mo...

(This article belongs to the Special Issue Joint Biomechanics and Implant Design)

of 2